blob: 5c3af8f993d0c490db6c58a7a8c349e0fb282fc6 [file] [log] [blame]
/*
* Copyright 2011-2014 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/genalloc.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/regmap.h>
#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/fncpy.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include <asm/tlb.h>
#include "common.h"
#include "hardware.h"
#define CCR 0x0
#define BM_CCR_WB_COUNT (0x7 << 16)
#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21)
#define BM_CCR_RBC_EN (0x1 << 27)
#define CLPCR 0x54
#define BP_CLPCR_LPM 0
#define BM_CLPCR_LPM (0x3 << 0)
#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
#define BM_CLPCR_SBYOS (0x1 << 6)
#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
#define BM_CLPCR_VSTBY (0x1 << 8)
#define BP_CLPCR_STBY_COUNT 9
#define BM_CLPCR_STBY_COUNT (0x3 << 9)
#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
#define CGPR 0x64
#define BM_CGPR_INT_MEM_CLK_LPM (0x1 << 17)
#define MX6Q_SUSPEND_OCRAM_SIZE 0x1000
#define MX6_MAX_MMDC_IO_NUM 33
static void __iomem *ccm_base;
static void __iomem *suspend_ocram_base;
static void (*imx6_suspend_in_ocram_fn)(void __iomem *ocram_vbase);
/*
* suspend ocram space layout:
* ======================== high address ======================
* .
* .
* .
* ^
* ^
* ^
* imx6_suspend code
* PM_INFO structure(imx6_cpu_pm_info)
* ======================== low address =======================
*/
struct imx6_pm_base {
phys_addr_t pbase;
void __iomem *vbase;
};
struct imx6_pm_socdata {
u32 cpu_type;
const char *mmdc_compat;
const char *src_compat;
const char *iomuxc_compat;
const char *gpc_compat;
const u32 mmdc_io_num;
const u32 *mmdc_io_offset;
};
static const u32 imx6q_mmdc_io_offset[] __initconst = {
0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */
0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */
0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */
0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */
0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */
0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */
0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */
0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */
0x74c, /* GPR_ADDS */
};
static const u32 imx6dl_mmdc_io_offset[] __initconst = {
0x470, 0x474, 0x478, 0x47c, /* DQM0 ~ DQM3 */
0x480, 0x484, 0x488, 0x48c, /* DQM4 ~ DQM7 */
0x464, 0x490, 0x4ac, 0x4b0, /* CAS, RAS, SDCLK_0, SDCLK_1 */
0x4bc, 0x4c0, 0x4c4, 0x4c8, /* DRAM_SDQS0 ~ DRAM_SDQS3 */
0x4cc, 0x4d0, 0x4d4, 0x4d8, /* DRAM_SDQS4 ~ DRAM_SDQS7 */
0x764, 0x770, 0x778, 0x77c, /* GPR_B0DS ~ GPR_B3DS */
0x780, 0x784, 0x78c, 0x748, /* GPR_B4DS ~ GPR_B7DS */
0x4b4, 0x4b8, 0x750, 0x760, /* SODT0, SODT1, MODE_CTL, MODE */
0x74c, /* GPR_ADDS */
};
static const u32 imx6sl_mmdc_io_offset[] __initconst = {
0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */
0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */
0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */
0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */
0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */
};
static const u32 imx6sx_mmdc_io_offset[] __initconst = {
0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */
0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */
0x300, 0x2fc, 0x32c, 0x5f4, /* CAS, RAS, SDCLK_0, GPR_ADDS */
0x310, 0x314, 0x5f8, 0x608, /* SODT0, SODT1, MODE_CTL, MODE */
0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
};
static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
.cpu_type = MXC_CPU_IMX6Q,
.mmdc_compat = "fsl,imx6q-mmdc",
.src_compat = "fsl,imx6q-src",
.iomuxc_compat = "fsl,imx6q-iomuxc",
.gpc_compat = "fsl,imx6q-gpc",
.mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset),
.mmdc_io_offset = imx6q_mmdc_io_offset,
};
static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
.cpu_type = MXC_CPU_IMX6DL,
.mmdc_compat = "fsl,imx6q-mmdc",
.src_compat = "fsl,imx6q-src",
.iomuxc_compat = "fsl,imx6dl-iomuxc",
.gpc_compat = "fsl,imx6q-gpc",
.mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset),
.mmdc_io_offset = imx6dl_mmdc_io_offset,
};
static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
.cpu_type = MXC_CPU_IMX6SL,
.mmdc_compat = "fsl,imx6sl-mmdc",
.src_compat = "fsl,imx6sl-src",
.iomuxc_compat = "fsl,imx6sl-iomuxc",
.gpc_compat = "fsl,imx6sl-gpc",
.mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
.mmdc_io_offset = imx6sl_mmdc_io_offset,
};
static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
.cpu_type = MXC_CPU_IMX6SX,
.mmdc_compat = "fsl,imx6sx-mmdc",
.src_compat = "fsl,imx6sx-src",
.iomuxc_compat = "fsl,imx6sx-iomuxc",
.gpc_compat = "fsl,imx6sx-gpc",
.mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset),
.mmdc_io_offset = imx6sx_mmdc_io_offset,
};
/*
* This structure is for passing necessary data for low level ocram
* suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
* definition is changed, the offset definition in
* arch/arm/mach-imx/suspend-imx6.S must be also changed accordingly,
* otherwise, the suspend to ocram function will be broken!
*/
struct imx6_cpu_pm_info {
phys_addr_t pbase; /* The physical address of pm_info. */
phys_addr_t resume_addr; /* The physical resume address for asm code */
u32 cpu_type;
u32 pm_info_size; /* Size of pm_info. */
struct imx6_pm_base mmdc_base;
struct imx6_pm_base src_base;
struct imx6_pm_base iomuxc_base;
struct imx6_pm_base ccm_base;
struct imx6_pm_base gpc_base;
struct imx6_pm_base l2_base;
u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */
u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
} __aligned(8);
void imx6q_set_int_mem_clk_lpm(bool enable)
{
u32 val = readl_relaxed(ccm_base + CGPR);
val &= ~BM_CGPR_INT_MEM_CLK_LPM;
if (enable)
val |= BM_CGPR_INT_MEM_CLK_LPM;
writel_relaxed(val, ccm_base + CGPR);
}
static void imx6q_enable_rbc(bool enable)
{
u32 val;
/*
* need to mask all interrupts in GPC before
* operating RBC configurations
*/
imx_gpc_mask_all();
/* configure RBC enable bit */
val = readl_relaxed(ccm_base + CCR);
val &= ~BM_CCR_RBC_EN;
val |= enable ? BM_CCR_RBC_EN : 0;
writel_relaxed(val, ccm_base + CCR);
/* configure RBC count */
val = readl_relaxed(ccm_base + CCR);
val &= ~BM_CCR_RBC_BYPASS_COUNT;
val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
writel(val, ccm_base + CCR);
/*
* need to delay at least 2 cycles of CKIL(32K)
* due to hardware design requirement, which is
* ~61us, here we use 65us for safe
*/
udelay(65);
/* restore GPC interrupt mask settings */
imx_gpc_restore_all();
}
static void imx6q_enable_wb(bool enable)
{
u32 val;
/* configure well bias enable bit */
val = readl_relaxed(ccm_base + CLPCR);
val &= ~BM_CLPCR_WB_PER_AT_LPM;
val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
writel_relaxed(val, ccm_base + CLPCR);
/* configure well bias count */
val = readl_relaxed(ccm_base + CCR);
val &= ~BM_CCR_WB_COUNT;
val |= enable ? BM_CCR_WB_COUNT : 0;
writel_relaxed(val, ccm_base + CCR);
}
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
{
struct irq_data *iomuxc_irq_data = irq_get_irq_data(32);
u32 val = readl_relaxed(ccm_base + CLPCR);
val &= ~BM_CLPCR_LPM;
switch (mode) {
case WAIT_CLOCKED:
break;
case WAIT_UNCLOCKED:
val |= 0x1 << BP_CLPCR_LPM;
val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
break;
case STOP_POWER_ON:
val |= 0x2 << BP_CLPCR_LPM;
val &= ~BM_CLPCR_VSTBY;
val &= ~BM_CLPCR_SBYOS;
if (cpu_is_imx6sl())
val |= BM_CLPCR_BYPASS_PMIC_READY;
if (cpu_is_imx6sl() || cpu_is_imx6sx())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
else
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
break;
case WAIT_UNCLOCKED_POWER_OFF:
val |= 0x1 << BP_CLPCR_LPM;
val &= ~BM_CLPCR_VSTBY;
val &= ~BM_CLPCR_SBYOS;
break;
case STOP_POWER_OFF:
val |= 0x2 << BP_CLPCR_LPM;
val |= 0x3 << BP_CLPCR_STBY_COUNT;
val |= BM_CLPCR_VSTBY;
val |= BM_CLPCR_SBYOS;
if (cpu_is_imx6sl())
val |= BM_CLPCR_BYPASS_PMIC_READY;
if (cpu_is_imx6sl() || cpu_is_imx6sx())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
else
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
break;
default:
return -EINVAL;
}
/*
* ERR007265: CCM: When improper low-power sequence is used,
* the SoC enters low power mode before the ARM core executes WFI.
*
* Software workaround:
* 1) Software should trigger IRQ #32 (IOMUX) to be always pending
* by setting IOMUX_GPR1_GINT.
* 2) Software should then unmask IRQ #32 in GPC before setting CCM
* Low-Power mode.
* 3) Software should mask IRQ #32 right after CCM Low-Power mode
* is set (set bits 0-1 of CCM_CLPCR).
*/
imx_gpc_irq_unmask(iomuxc_irq_data);
writel_relaxed(val, ccm_base + CLPCR);
imx_gpc_irq_mask(iomuxc_irq_data);
return 0;
}
static int imx6q_suspend_finish(unsigned long val)
{
if (!imx6_suspend_in_ocram_fn) {
cpu_do_idle();
} else {
/*
* call low level suspend function in ocram,
* as we need to float DDR IO.
*/
local_flush_tlb_all();
imx6_suspend_in_ocram_fn(suspend_ocram_base);
}
return 0;
}
static int imx6q_pm_enter(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_STANDBY:
imx6q_set_lpm(STOP_POWER_ON);
imx6q_set_int_mem_clk_lpm(true);
imx_gpc_pre_suspend(false);
if (cpu_is_imx6sl())
imx6sl_set_wait_clk(true);
/* Zzz ... */
cpu_do_idle();
if (cpu_is_imx6sl())
imx6sl_set_wait_clk(false);
imx_gpc_post_resume();
imx6q_set_lpm(WAIT_CLOCKED);
break;
case PM_SUSPEND_MEM:
imx6q_set_lpm(STOP_POWER_OFF);
imx6q_set_int_mem_clk_lpm(false);
imx6q_enable_wb(true);
/*
* For suspend into ocram, asm code already take care of
* RBC setting, so we do NOT need to do that here.
*/
if (!imx6_suspend_in_ocram_fn)
imx6q_enable_rbc(true);
imx_gpc_pre_suspend(true);
imx_anatop_pre_suspend();
imx_set_cpu_jump(0, v7_cpu_resume);
/* Zzz ... */
cpu_suspend(0, imx6q_suspend_finish);
if (cpu_is_imx6q() || cpu_is_imx6dl())
imx_smp_prepare();
imx_anatop_post_resume();
imx_gpc_post_resume();
imx6q_enable_rbc(false);
imx6q_enable_wb(false);
imx6q_set_int_mem_clk_lpm(true);
imx6q_set_lpm(WAIT_CLOCKED);
break;
default:
return -EINVAL;
}
return 0;
}
static int imx6q_pm_valid(suspend_state_t state)
{
return (state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM);
}
static const struct platform_suspend_ops imx6q_pm_ops = {
.enter = imx6q_pm_enter,
.valid = imx6q_pm_valid,
};
void __init imx6q_pm_set_ccm_base(void __iomem *base)
{
ccm_base = base;
}
static int __init imx6_pm_get_base(struct imx6_pm_base *base,
const char *compat)
{
struct device_node *node;
struct resource res;
int ret = 0;
node = of_find_compatible_node(NULL, NULL, compat);
if (!node) {
ret = -ENODEV;
goto out;
}
ret = of_address_to_resource(node, 0, &res);
if (ret)
goto put_node;
base->pbase = res.start;
base->vbase = ioremap(res.start, resource_size(&res));
if (!base->vbase)
ret = -ENOMEM;
put_node:
of_node_put(node);
out:
return ret;
}
static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
{
phys_addr_t ocram_pbase;
struct device_node *node;
struct platform_device *pdev;
struct imx6_cpu_pm_info *pm_info;
struct gen_pool *ocram_pool;
unsigned long ocram_base;
int i, ret = 0;
const u32 *mmdc_offset_array;
suspend_set_ops(&imx6q_pm_ops);
if (!socdata) {
pr_warn("%s: invalid argument!\n", __func__);
return -EINVAL;
}
node = of_find_compatible_node(NULL, NULL, "mmio-sram");
if (!node) {
pr_warn("%s: failed to find ocram node!\n", __func__);
return -ENODEV;
}
pdev = of_find_device_by_node(node);
if (!pdev) {
pr_warn("%s: failed to find ocram device!\n", __func__);
ret = -ENODEV;
goto put_node;
}
ocram_pool = dev_get_gen_pool(&pdev->dev);
if (!ocram_pool) {
pr_warn("%s: ocram pool unavailable!\n", __func__);
ret = -ENODEV;
goto put_node;
}
ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE);
if (!ocram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
ret = -ENOMEM;
goto put_node;
}
ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
MX6Q_SUSPEND_OCRAM_SIZE, false);
pm_info = suspend_ocram_base;
pm_info->pbase = ocram_pbase;
pm_info->resume_addr = virt_to_phys(v7_cpu_resume);
pm_info->pm_info_size = sizeof(*pm_info);
/*
* ccm physical address is not used by asm code currently,
* so get ccm virtual address directly, as we already have
* it from ccm driver.
*/
pm_info->ccm_base.vbase = ccm_base;
ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat);
if (ret) {
pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);
goto put_node;
}
ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat);
if (ret) {
pr_warn("%s: failed to get src base %d!\n", __func__, ret);
goto src_map_failed;
}
ret = imx6_pm_get_base(&pm_info->iomuxc_base, socdata->iomuxc_compat);
if (ret) {
pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret);
goto iomuxc_map_failed;
}
ret = imx6_pm_get_base(&pm_info->gpc_base, socdata->gpc_compat);
if (ret) {
pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
goto gpc_map_failed;
}
ret = imx6_pm_get_base(&pm_info->l2_base, "arm,pl310-cache");
if (ret) {
pr_warn("%s: failed to get pl310-cache base %d!\n",
__func__, ret);
goto pl310_cache_map_failed;
}
pm_info->cpu_type = socdata->cpu_type;
pm_info->mmdc_io_num = socdata->mmdc_io_num;
mmdc_offset_array = socdata->mmdc_io_offset;
for (i = 0; i < pm_info->mmdc_io_num; i++) {
pm_info->mmdc_io_val[i][0] =
mmdc_offset_array[i];
pm_info->mmdc_io_val[i][1] =
readl_relaxed(pm_info->iomuxc_base.vbase +
mmdc_offset_array[i]);
}
imx6_suspend_in_ocram_fn = fncpy(
suspend_ocram_base + sizeof(*pm_info),
&imx6_suspend,
MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
goto put_node;
pl310_cache_map_failed:
iounmap(&pm_info->gpc_base.vbase);
gpc_map_failed:
iounmap(&pm_info->iomuxc_base.vbase);
iomuxc_map_failed:
iounmap(&pm_info->src_base.vbase);
src_map_failed:
iounmap(&pm_info->mmdc_base.vbase);
put_node:
of_node_put(node);
return ret;
}
static void __init imx6_pm_common_init(const struct imx6_pm_socdata
*socdata)
{
struct regmap *gpr;
int ret;
WARN_ON(!ccm_base);
if (IS_ENABLED(CONFIG_SUSPEND)) {
ret = imx6q_suspend_init(socdata);
if (ret)
pr_warn("%s: No DDR LPM support with suspend %d!\n",
__func__, ret);
}
/*
* This is for SW workaround step #1 of ERR007265, see comments
* in imx6q_set_lpm for details of this errata.
* Force IOMUXC irq pending, so that the interrupt to GPC can be
* used to deassert dsm_request signal when the signal gets
* asserted unexpectedly.
*/
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
if (!IS_ERR(gpr))
regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
IMX6Q_GPR1_GINT);
}
void __init imx6q_pm_init(void)
{
imx6_pm_common_init(&imx6q_pm_data);
}
void __init imx6dl_pm_init(void)
{
imx6_pm_common_init(&imx6dl_pm_data);
}
void __init imx6sl_pm_init(void)
{
imx6_pm_common_init(&imx6sl_pm_data);
}
void __init imx6sx_pm_init(void)
{
imx6_pm_common_init(&imx6sx_pm_data);
}