| /* |
| * arch/m68k/q40/config.c |
| * |
| * Copyright (C) 1999 Richard Zidlicky |
| * |
| * originally based on: |
| * |
| * linux/bvme/config.c |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file README.legal in the main directory of this archive |
| * for more details. |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/tty.h> |
| #include <linux/console.h> |
| #include <linux/linkage.h> |
| #include <linux/init.h> |
| #include <linux/major.h> |
| #include <linux/serial_reg.h> |
| #include <linux/rtc.h> |
| #include <linux/vt_kern.h> |
| #include <linux/bcd.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/io.h> |
| #include <asm/bootinfo.h> |
| #include <asm/setup.h> |
| #include <asm/irq.h> |
| #include <asm/traps.h> |
| #include <asm/machdep.h> |
| #include <asm/q40_master.h> |
| |
| extern void q40_init_IRQ(void); |
| static void q40_get_model(char *model); |
| extern void q40_sched_init(void); |
| |
| static int q40_hwclk(int, struct rtc_time *); |
| static unsigned int q40_get_ss(void); |
| static int q40_get_rtc_pll(struct rtc_pll_info *pll); |
| static int q40_set_rtc_pll(struct rtc_pll_info *pll); |
| |
| extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/); |
| |
| static void q40_mem_console_write(struct console *co, const char *b, |
| unsigned int count); |
| |
| extern int ql_ticks; |
| |
| static struct console q40_console_driver = { |
| .name = "debug", |
| .write = q40_mem_console_write, |
| .flags = CON_PRINTBUFFER, |
| .index = -1, |
| }; |
| |
| |
| /* early debugging function:*/ |
| extern char *q40_mem_cptr; /*=(char *)0xff020000;*/ |
| static int _cpleft; |
| |
| static void q40_mem_console_write(struct console *co, const char *s, |
| unsigned int count) |
| { |
| const char *p = s; |
| |
| if (count < _cpleft) { |
| while (count-- > 0) { |
| *q40_mem_cptr = *p++; |
| q40_mem_cptr += 4; |
| _cpleft--; |
| } |
| } |
| } |
| |
| static int __init q40_debug_setup(char *arg) |
| { |
| /* useful for early debugging stages - writes kernel messages into SRAM */ |
| if (MACH_IS_Q40 && !strncmp(arg, "mem", 3)) { |
| /*pr_info("using NVRAM debug, q40_mem_cptr=%p\n",q40_mem_cptr);*/ |
| _cpleft = 2000 - ((long)q40_mem_cptr-0xff020000) / 4; |
| register_console(&q40_console_driver); |
| } |
| return 0; |
| } |
| |
| early_param("debug", q40_debug_setup); |
| |
| #if 0 |
| void printq40(char *str) |
| { |
| int l = strlen(str); |
| char *p = q40_mem_cptr; |
| |
| while (l-- > 0 && _cpleft-- > 0) { |
| *p = *str++; |
| p += 4; |
| } |
| q40_mem_cptr = p; |
| } |
| #endif |
| |
| static int halted; |
| |
| #ifdef CONFIG_HEARTBEAT |
| static void q40_heartbeat(int on) |
| { |
| if (halted) |
| return; |
| |
| if (on) |
| Q40_LED_ON(); |
| else |
| Q40_LED_OFF(); |
| } |
| #endif |
| |
| static void q40_reset(void) |
| { |
| halted = 1; |
| pr_info("*******************************************\n" |
| "Called q40_reset : press the RESET button!!\n" |
| "*******************************************\n"); |
| Q40_LED_ON(); |
| while (1) |
| ; |
| } |
| |
| static void q40_halt(void) |
| { |
| halted = 1; |
| pr_info("*******************\n" |
| " Called q40_halt\n" |
| "*******************\n"); |
| Q40_LED_ON(); |
| while (1) |
| ; |
| } |
| |
| static void q40_get_model(char *model) |
| { |
| sprintf(model, "Q40"); |
| } |
| |
| static unsigned int serports[] = |
| { |
| 0x3f8,0x2f8,0x3e8,0x2e8,0 |
| }; |
| |
| static void __init q40_disable_irqs(void) |
| { |
| unsigned i, j; |
| |
| j = 0; |
| while ((i = serports[j++])) |
| outb(0, i + UART_IER); |
| master_outb(0, EXT_ENABLE_REG); |
| master_outb(0, KEY_IRQ_ENABLE_REG); |
| } |
| |
| void __init config_q40(void) |
| { |
| mach_sched_init = q40_sched_init; |
| |
| mach_init_IRQ = q40_init_IRQ; |
| mach_hwclk = q40_hwclk; |
| mach_get_ss = q40_get_ss; |
| mach_get_rtc_pll = q40_get_rtc_pll; |
| mach_set_rtc_pll = q40_set_rtc_pll; |
| |
| mach_reset = q40_reset; |
| mach_get_model = q40_get_model; |
| |
| #if IS_ENABLED(CONFIG_INPUT_M68K_BEEP) |
| mach_beep = q40_mksound; |
| #endif |
| #ifdef CONFIG_HEARTBEAT |
| mach_heartbeat = q40_heartbeat; |
| #endif |
| mach_halt = q40_halt; |
| |
| /* disable a few things that SMSQ might have left enabled */ |
| q40_disable_irqs(); |
| } |
| |
| |
| int __init q40_parse_bootinfo(const struct bi_record *rec) |
| { |
| return 1; |
| } |
| |
| /* |
| * Looks like op is non-zero for setting the clock, and zero for |
| * reading the clock. |
| * |
| * struct hwclk_time { |
| * unsigned sec; 0..59 |
| * unsigned min; 0..59 |
| * unsigned hour; 0..23 |
| * unsigned day; 1..31 |
| * unsigned mon; 0..11 |
| * unsigned year; 00... |
| * int wday; 0..6, 0 is Sunday, -1 means unknown/don't set |
| * }; |
| */ |
| |
| static int q40_hwclk(int op, struct rtc_time *t) |
| { |
| if (op) { |
| /* Write.... */ |
| Q40_RTC_CTRL |= Q40_RTC_WRITE; |
| |
| Q40_RTC_SECS = bin2bcd(t->tm_sec); |
| Q40_RTC_MINS = bin2bcd(t->tm_min); |
| Q40_RTC_HOUR = bin2bcd(t->tm_hour); |
| Q40_RTC_DATE = bin2bcd(t->tm_mday); |
| Q40_RTC_MNTH = bin2bcd(t->tm_mon + 1); |
| Q40_RTC_YEAR = bin2bcd(t->tm_year%100); |
| if (t->tm_wday >= 0) |
| Q40_RTC_DOW = bin2bcd(t->tm_wday+1); |
| |
| Q40_RTC_CTRL &= ~(Q40_RTC_WRITE); |
| } else { |
| /* Read.... */ |
| Q40_RTC_CTRL |= Q40_RTC_READ; |
| |
| t->tm_year = bcd2bin (Q40_RTC_YEAR); |
| t->tm_mon = bcd2bin (Q40_RTC_MNTH)-1; |
| t->tm_mday = bcd2bin (Q40_RTC_DATE); |
| t->tm_hour = bcd2bin (Q40_RTC_HOUR); |
| t->tm_min = bcd2bin (Q40_RTC_MINS); |
| t->tm_sec = bcd2bin (Q40_RTC_SECS); |
| |
| Q40_RTC_CTRL &= ~(Q40_RTC_READ); |
| |
| if (t->tm_year < 70) |
| t->tm_year += 100; |
| t->tm_wday = bcd2bin(Q40_RTC_DOW)-1; |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int q40_get_ss(void) |
| { |
| return bcd2bin(Q40_RTC_SECS); |
| } |
| |
| /* get and set PLL calibration of RTC clock */ |
| #define Q40_RTC_PLL_MASK ((1<<5)-1) |
| #define Q40_RTC_PLL_SIGN (1<<5) |
| |
| static int q40_get_rtc_pll(struct rtc_pll_info *pll) |
| { |
| int tmp = Q40_RTC_CTRL; |
| |
| pll->pll_ctrl = 0; |
| pll->pll_value = tmp & Q40_RTC_PLL_MASK; |
| if (tmp & Q40_RTC_PLL_SIGN) |
| pll->pll_value = -pll->pll_value; |
| pll->pll_max = 31; |
| pll->pll_min = -31; |
| pll->pll_posmult = 512; |
| pll->pll_negmult = 256; |
| pll->pll_clock = 125829120; |
| |
| return 0; |
| } |
| |
| static int q40_set_rtc_pll(struct rtc_pll_info *pll) |
| { |
| if (!pll->pll_ctrl) { |
| /* the docs are a bit unclear so I am doublesetting */ |
| /* RTC_WRITE here ... */ |
| int tmp = (pll->pll_value & 31) | (pll->pll_value<0 ? 32 : 0) | |
| Q40_RTC_WRITE; |
| Q40_RTC_CTRL |= Q40_RTC_WRITE; |
| Q40_RTC_CTRL = tmp; |
| Q40_RTC_CTRL &= ~(Q40_RTC_WRITE); |
| return 0; |
| } else |
| return -EINVAL; |
| } |
| |
| static __init int q40_add_kbd_device(void) |
| { |
| struct platform_device *pdev; |
| |
| if (!MACH_IS_Q40) |
| return -ENODEV; |
| |
| pdev = platform_device_register_simple("q40kbd", -1, NULL, 0); |
| return PTR_ERR_OR_ZERO(pdev); |
| } |
| arch_initcall(q40_add_kbd_device); |