arch/arm/include/asm/memory.h - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  arch/arm/include/asm/memory.h
  *
  *  Copyright (C) 2000-2002 Russell King
  *  modification for nommu, Hyok S. Choi, 2004
  *
  *  Note: this file should not be included explicitly, include <asm/page.h>
  *  to get access to these definitions.
  */
 #ifndef __ASM_ARM_MEMORY_H
 #define __ASM_ARM_MEMORY_H

 #ifndef _ASMARM_PAGE_H
 #error "Do not include <asm/memory.h> directly"
 #endif

 #include <linux/compiler.h>
 #include <linux/const.h>
 #include <linux/types.h>
 #include <linux/sizes.h>

 #ifdef CONFIG_NEED_MACH_MEMORY_H
 #include <mach/memory.h>
 #endif
 #include <asm/kasan_def.h>

 /*
  * PAGE_OFFSET: the virtual address of the start of lowmem, memory above
  *   the virtual address range for userspace.
  * KERNEL_OFFSET: the virtual address of the start of the kernel image.
  *   we may further offset this with TEXT_OFFSET in practice.
  */
 #define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
 #define KERNEL_OFFSET		(PAGE_OFFSET)

 #ifdef CONFIG_MMU

 /*
  * TASK_SIZE - the maximum size of a user space task.
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
  */
 #ifndef CONFIG_KASAN
 #define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M))
 #else
 #define TASK_SIZE		(KASAN_SHADOW_START)
 #endif
 #define TASK_UNMAPPED_BASE	ALIGN(TASK_SIZE / 3, SZ_16M)

 /*
  * The maximum size of a 26-bit user space task.
  */
 #define TASK_SIZE_26		(UL(1) << 26)

 /*
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 32MB of the kernel text.
  */
 #ifndef CONFIG_THUMB2_KERNEL
 #define MODULES_VADDR		(PAGE_OFFSET - SZ_16M)
 #else
 /* smaller range for Thumb-2 symbols relocation (2^24)*/
 #define MODULES_VADDR		(PAGE_OFFSET - SZ_8M)
 #endif

 #if TASK_SIZE > MODULES_VADDR
 #error Top of user space clashes with start of module space
 #endif

 /*
  * The highmem pkmap virtual space shares the end of the module area.
  */
 #ifdef CONFIG_HIGHMEM
 #define MODULES_END		(PAGE_OFFSET - PMD_SIZE)
 #else
 #define MODULES_END		(PAGE_OFFSET)
 #endif

 /*
  * The XIP kernel gets mapped at the bottom of the module vm area.
  * Since we use sections to map it, this macro replaces the physical address
  * with its virtual address while keeping offset from the base section.
  */
 #define XIP_VIRT_ADDR(physaddr)  (MODULES_VADDR + ((physaddr) & 0x000fffff))

 #define FDT_FIXED_BASE		UL(0xff800000)
 #define FDT_FIXED_SIZE		(2 * SECTION_SIZE)
 #define FDT_VIRT_BASE(physbase)	((void *)(FDT_FIXED_BASE | (physbase) % SECTION_SIZE))

 #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
 /*
  * Allow 16MB-aligned ioremap pages
  */
 #define IOREMAP_MAX_ORDER	24
 #endif

 #define VECTORS_BASE		UL(0xffff0000)

 #else /* CONFIG_MMU */

 #ifndef __ASSEMBLY__
 extern unsigned long setup_vectors_base(void);
 extern unsigned long vectors_base;
 #define VECTORS_BASE		vectors_base
 #endif

 /*
  * The limitation of user task size can grow up to the end of free ram region.
  * It is difficult to define and perhaps will never meet the original meaning
  * of this define that was meant to.
  * Fortunately, there is no reference for this in noMMU mode, for now.
  */
 #define TASK_SIZE		UL(0xffffffff)

 #ifndef TASK_UNMAPPED_BASE
 #define TASK_UNMAPPED_BASE	UL(0x00000000)
 #endif

 #ifndef END_MEM
 #define END_MEM     		(UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
 #endif

 /*
  * The module can be at any place in ram in nommu mode.
  */
 #define MODULES_END		(END_MEM)
 #define MODULES_VADDR		PAGE_OFFSET

 #define XIP_VIRT_ADDR(physaddr)  (physaddr)
 #define FDT_VIRT_BASE(physbase)  ((void *)(physbase))

 #endif /* !CONFIG_MMU */

 #ifdef CONFIG_XIP_KERNEL
 #define KERNEL_START		_sdata
 #else
 #define KERNEL_START		_stext
 #endif
 #define KERNEL_END		_end

 /*
  * We fix the TCM memories max 32 KiB ITCM resp DTCM at these
  * locations
  */
 #ifdef CONFIG_HAVE_TCM
 #define ITCM_OFFSET	UL(0xfffe0000)
 #define DTCM_OFFSET	UL(0xfffe8000)
 #endif

 /*
  * Convert a page to/from a physical address
  */
 #define page_to_phys(page)	(__pfn_to_phys(page_to_pfn(page)))
 #define phys_to_page(phys)	(pfn_to_page(__phys_to_pfn(phys)))

 /*
  * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
  * memory.  This is used for XIP and NoMMU kernels, and on platforms that don't
  * have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use
  * PLAT_PHYS_OFFSET and not PHYS_OFFSET.
  */
 #define PLAT_PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)

 #ifndef __ASSEMBLY__

 /*
  * Physical start and end address of the kernel sections. These addresses are
  * 2MB-aligned to match the section mappings placed over the kernel. We use
  * u64 so that LPAE mappings beyond the 32bit limit will work out as well.
  */
 extern u64 kernel_sec_start;
 extern u64 kernel_sec_end;

 /*
  * Physical vs virtual RAM address space conversion.  These are
  * private definitions which should NOT be used outside memory.h
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
  *
  * PFNs are used to describe any physical page; this means
  * PFN 0 == physical address 0.
  */

 #if defined(CONFIG_ARM_PATCH_PHYS_VIRT)

 /*
  * Constants used to force the right instruction encodings and shifts
  * so that all we need to do is modify the 8-bit constant field.
  */
 #define __PV_BITS_31_24	0x81000000
 #define __PV_BITS_23_16	0x810000
 #define __PV_BITS_7_0	0x81

 extern unsigned long __pv_phys_pfn_offset;
 extern u64 __pv_offset;
 extern void fixup_pv_table(const void *, unsigned long);
 extern const void *__pv_table_begin, *__pv_table_end;

 #define PHYS_OFFSET	((phys_addr_t)__pv_phys_pfn_offset << PAGE_SHIFT)
 #define PHYS_PFN_OFFSET	(__pv_phys_pfn_offset)

 #ifndef CONFIG_THUMB2_KERNEL
 #define __pv_stub(from,to,instr)			\
 	__asm__("@ __pv_stub\n"				\
 	"1:	" instr "	%0, %1, %2\n"		\
 	"2:	" instr "	%0, %0, %3\n"		\
 	"	.pushsection .pv_table,\"a\"\n"		\
 	"	.long	1b - ., 2b - .\n"		\
 	"	.popsection\n"				\
 	: "=r" (to)					\
 	: "r" (from), "I" (__PV_BITS_31_24),		\
 	  "I"(__PV_BITS_23_16))

 #define __pv_add_carry_stub(x, y)			\
 	__asm__("@ __pv_add_carry_stub\n"		\
 	"0:	movw	%R0, #0\n"			\
 	"	adds	%Q0, %1, %R0, lsl #20\n"	\
 	"1:	mov	%R0, %2\n"			\
 	"	adc	%R0, %R0, #0\n"			\
 	"	.pushsection .pv_table,\"a\"\n"		\
 	"	.long	0b - ., 1b - .\n"		\
 	"	.popsection\n"				\
 	: "=&r" (y)					\
 	: "r" (x), "I" (__PV_BITS_7_0)			\
 	: "cc")

 #else
 #define __pv_stub(from,to,instr)			\
 	__asm__("@ __pv_stub\n"				\
 	"0:	movw	%0, #0\n"			\
 	"	lsl	%0, #21\n"			\
 	"	" instr " %0, %1, %0\n"			\
 	"	.pushsection .pv_table,\"a\"\n"		\
 	"	.long	0b - .\n"			\
 	"	.popsection\n"				\
 	: "=&r" (to)					\
 	: "r" (from))

 #define __pv_add_carry_stub(x, y)			\
 	__asm__("@ __pv_add_carry_stub\n"		\
 	"0:	movw	%R0, #0\n"			\
 	"	lsls	%R0, #21\n"			\
 	"	adds	%Q0, %1, %R0\n"			\
 	"1:	mvn	%R0, #0\n"			\
 	"	adc	%R0, %R0, #0\n"			\
 	"	.pushsection .pv_table,\"a\"\n"		\
 	"	.long	0b - ., 1b - .\n"		\
 	"	.popsection\n"				\
 	: "=&r" (y)					\
 	: "r" (x)					\
 	: "cc")
 #endif

 static inline phys_addr_t __virt_to_phys_nodebug(unsigned long x)
 {
 	phys_addr_t t;

 	if (sizeof(phys_addr_t) == 4) {
 		__pv_stub(x, t, "add");
 	} else {
 		__pv_add_carry_stub(x, t);
 	}
 	return t;
 }

 static inline unsigned long __phys_to_virt(phys_addr_t x)
 {
 	unsigned long t;

 	/*
 	 * 'unsigned long' cast discard upper word when
 	 * phys_addr_t is 64 bit, and makes sure that inline
 	 * assembler expression receives 32 bit argument
 	 * in place where 'r' 32 bit operand is expected.
 	 */
 	__pv_stub((unsigned long) x, t, "sub");
 	return t;
 }

 #else

 #define PHYS_OFFSET	PLAT_PHYS_OFFSET
 #define PHYS_PFN_OFFSET	((unsigned long)(PHYS_OFFSET >> PAGE_SHIFT))

 static inline phys_addr_t __virt_to_phys_nodebug(unsigned long x)
 {
 	return (phys_addr_t)x - PAGE_OFFSET + PHYS_OFFSET;
 }

 static inline unsigned long __phys_to_virt(phys_addr_t x)
 {
 	return x - PHYS_OFFSET + PAGE_OFFSET;
 }

 #endif

 static inline unsigned long virt_to_pfn(const void *p)
 {
 	unsigned long kaddr = (unsigned long)p;
 	return (((kaddr - PAGE_OFFSET) >> PAGE_SHIFT) +
 		PHYS_PFN_OFFSET);
 }
 #define __pa_symbol_nodebug(x)	__virt_to_phys_nodebug((x))

 #ifdef CONFIG_DEBUG_VIRTUAL
 extern phys_addr_t __virt_to_phys(unsigned long x);
 extern phys_addr_t __phys_addr_symbol(unsigned long x);
 #else
 #define __virt_to_phys(x)	__virt_to_phys_nodebug(x)
 #define __phys_addr_symbol(x)	__pa_symbol_nodebug(x)
 #endif

 /*
  * These are *only* valid on the kernel direct mapped RAM memory.
  * Note: Drivers should NOT use these.  They are the wrong
  * translation for translating DMA addresses.  Use the driver
  * DMA support - see dma-mapping.h.
  */
 #define virt_to_phys virt_to_phys
 static inline phys_addr_t virt_to_phys(const volatile void *x)
 {
 	return __virt_to_phys((unsigned long)(x));
 }

 #define phys_to_virt phys_to_virt
 static inline void *phys_to_virt(phys_addr_t x)
 {
 	return (void *)__phys_to_virt(x);
 }

 /*
  * Drivers should NOT use these either.
  */
 #define __pa(x)			__virt_to_phys((unsigned long)(x))
 #define __pa_symbol(x)		__phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0))
 #define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
 #define pfn_to_kaddr(pfn)	__va((phys_addr_t)(pfn) << PAGE_SHIFT)

 extern long long arch_phys_to_idmap_offset;

 /*
  * These are for systems that have a hardware interconnect supported alias
  * of physical memory for idmap purposes.  Most cases should leave these
  * untouched.  Note: this can only return addresses less than 4GiB.
  */
 static inline bool arm_has_idmap_alias(void)
 {
 	return IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset != 0;
 }

 #define IDMAP_INVALID_ADDR ((u32)~0)

 static inline unsigned long phys_to_idmap(phys_addr_t addr)
 {
 	if (IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset) {
 		addr += arch_phys_to_idmap_offset;
 		if (addr > (u32)~0)
 			addr = IDMAP_INVALID_ADDR;
 	}
 	return addr;
 }

 static inline phys_addr_t idmap_to_phys(unsigned long idmap)
 {
 	phys_addr_t addr = idmap;

 	if (IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset)
 		addr -= arch_phys_to_idmap_offset;

 	return addr;
 }

 static inline unsigned long __virt_to_idmap(unsigned long x)
 {
 	return phys_to_idmap(__virt_to_phys(x));
 }

 #define virt_to_idmap(x)	__virt_to_idmap((unsigned long)(x))

 /*
  * Conversion between a struct page and a physical address.
  *
  *  page_to_pfn(page)	convert a struct page * to a PFN number
  *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
  *
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
  *  virt_addr_valid(k)	indicates whether a virtual address is valid
  */
 #define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET

 #define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
 #define virt_addr_valid(kaddr)	(((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) \
 					&& pfn_valid(virt_to_pfn(kaddr)))

 #endif

 #endif
	/* SPDX-License-Identifier: GPL-2.0-only */
	/*
	* arch/arm/include/asm/memory.h
	*
	* Copyright (C) 2000-2002 Russell King
	* modification for nommu, Hyok S. Choi, 2004
	*
	* Note: this file should not be included explicitly, include <asm/page.h>
	* to get access to these definitions.
	*/
	#ifndef __ASM_ARM_MEMORY_H
	#define __ASM_ARM_MEMORY_H

	#ifndef _ASMARM_PAGE_H
	#error "Do not include <asm/memory.h> directly"
	#endif

	#include <linux/compiler.h>
	#include <linux/const.h>
	#include <linux/types.h>
	#include <linux/sizes.h>

	#ifdef CONFIG_NEED_MACH_MEMORY_H
	#include <mach/memory.h>
	#endif
	#include <asm/kasan_def.h>

	/*
	* PAGE_OFFSET: the virtual address of the start of lowmem, memory above
	* the virtual address range for userspace.
	* KERNEL_OFFSET: the virtual address of the start of the kernel image.
	* we may further offset this with TEXT_OFFSET in practice.
	*/
	#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET)
	#define KERNEL_OFFSET (PAGE_OFFSET)

	#ifdef CONFIG_MMU

	/*
	* TASK_SIZE - the maximum size of a user space task.
	* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
	*/
	#ifndef CONFIG_KASAN
	#define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M))
	#else
	#define TASK_SIZE (KASAN_SHADOW_START)
	#endif
	#define TASK_UNMAPPED_BASE ALIGN(TASK_SIZE / 3, SZ_16M)

	/*
	* The maximum size of a 26-bit user space task.
	*/
	#define TASK_SIZE_26 (UL(1) << 26)

	/*
	* The module space lives between the addresses given by TASK_SIZE
	* and PAGE_OFFSET - it must be within 32MB of the kernel text.
	*/
	#ifndef CONFIG_THUMB2_KERNEL
	#define MODULES_VADDR (PAGE_OFFSET - SZ_16M)
	#else
	/* smaller range for Thumb-2 symbols relocation (2^24)*/
	#define MODULES_VADDR (PAGE_OFFSET - SZ_8M)
	#endif

	#if TASK_SIZE > MODULES_VADDR
	#error Top of user space clashes with start of module space
	#endif

	/*
	* The highmem pkmap virtual space shares the end of the module area.
	*/
	#ifdef CONFIG_HIGHMEM
	#define MODULES_END (PAGE_OFFSET - PMD_SIZE)
	#else
	#define MODULES_END (PAGE_OFFSET)
	#endif

	/*
	* The XIP kernel gets mapped at the bottom of the module vm area.
	* Since we use sections to map it, this macro replaces the physical address
	* with its virtual address while keeping offset from the base section.
	*/
	#define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff))

	#define FDT_FIXED_BASE UL(0xff800000)
	#define FDT_FIXED_SIZE (2 * SECTION_SIZE)
	#define FDT_VIRT_BASE(physbase) ((void *)(FDT_FIXED_BASE \| (physbase) % SECTION_SIZE))

	#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
	/*
	* Allow 16MB-aligned ioremap pages
	*/
	#define IOREMAP_MAX_ORDER 24
	#endif

	#define VECTORS_BASE UL(0xffff0000)

	#else /* CONFIG_MMU */

	#ifndef __ASSEMBLY__
	extern unsigned long setup_vectors_base(void);
	extern unsigned long vectors_base;
	#define VECTORS_BASE vectors_base
	#endif

	/*
	* The limitation of user task size can grow up to the end of free ram region.
	* It is difficult to define and perhaps will never meet the original meaning
	* of this define that was meant to.
	* Fortunately, there is no reference for this in noMMU mode, for now.
	*/
	#define TASK_SIZE UL(0xffffffff)

	#ifndef TASK_UNMAPPED_BASE
	#define TASK_UNMAPPED_BASE UL(0x00000000)
	#endif

	#ifndef END_MEM
	#define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
	#endif

	/*
	* The module can be at any place in ram in nommu mode.
	*/
	#define MODULES_END (END_MEM)
	#define MODULES_VADDR PAGE_OFFSET

	#define XIP_VIRT_ADDR(physaddr) (physaddr)
	#define FDT_VIRT_BASE(physbase) ((void *)(physbase))

	#endif /* !CONFIG_MMU */

	#ifdef CONFIG_XIP_KERNEL
	#define KERNEL_START _sdata
	#else
	#define KERNEL_START _stext
	#endif
	#define KERNEL_END _end

	/*
	* We fix the TCM memories max 32 KiB ITCM resp DTCM at these
	* locations
	*/
	#ifdef CONFIG_HAVE_TCM
	#define ITCM_OFFSET UL(0xfffe0000)
	#define DTCM_OFFSET UL(0xfffe8000)
	#endif

	/*
	* Convert a page to/from a physical address
	*/
	#define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page)))
	#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))

	/*
	* PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
	* memory. This is used for XIP and NoMMU kernels, and on platforms that don't
	* have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use
	* PLAT_PHYS_OFFSET and not PHYS_OFFSET.
	*/
	#define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)

	#ifndef __ASSEMBLY__

	/*
	* Physical start and end address of the kernel sections. These addresses are
	* 2MB-aligned to match the section mappings placed over the kernel. We use
	* u64 so that LPAE mappings beyond the 32bit limit will work out as well.
	*/
	extern u64 kernel_sec_start;
	extern u64 kernel_sec_end;

	/*
	* Physical vs virtual RAM address space conversion. These are
	* private definitions which should NOT be used outside memory.h
	* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
	*
	* PFNs are used to describe any physical page; this means
	* PFN 0 == physical address 0.
	*/

	#if defined(CONFIG_ARM_PATCH_PHYS_VIRT)

	/*
	* Constants used to force the right instruction encodings and shifts
	* so that all we need to do is modify the 8-bit constant field.
	*/
	#define __PV_BITS_31_24 0x81000000
	#define __PV_BITS_23_16 0x810000
	#define __PV_BITS_7_0 0x81

	extern unsigned long __pv_phys_pfn_offset;
	extern u64 __pv_offset;
	extern void fixup_pv_table(const void *, unsigned long);
	extern const void __pv_table_begin, __pv_table_end;

	#define PHYS_OFFSET ((phys_addr_t)__pv_phys_pfn_offset << PAGE_SHIFT)
	#define PHYS_PFN_OFFSET (__pv_phys_pfn_offset)

	#ifndef CONFIG_THUMB2_KERNEL
	#define __pv_stub(from,to,instr) \
	__asm__("@ __pv_stub\n" \
	"1: " instr " %0, %1, %2\n" \
	"2: " instr " %0, %0, %3\n" \
	" .pushsection .pv_table,\"a\"\n" \
	" .long 1b - ., 2b - .\n" \
	" .popsection\n" \
	: "=r" (to) \
	: "r" (from), "I" (__PV_BITS_31_24), \
	"I"(__PV_BITS_23_16))

	#define __pv_add_carry_stub(x, y) \
	__asm__("@ __pv_add_carry_stub\n" \
	"0: movw %R0, #0\n" \
	" adds %Q0, %1, %R0, lsl #20\n" \
	"1: mov %R0, %2\n" \
	" adc %R0, %R0, #0\n" \
	" .pushsection .pv_table,\"a\"\n" \
	" .long 0b - ., 1b - .\n" \
	" .popsection\n" \
	: "=&r" (y) \
	: "r" (x), "I" (__PV_BITS_7_0) \
	: "cc")

	#else
	#define __pv_stub(from,to,instr) \
	__asm__("@ __pv_stub\n" \
	"0: movw %0, #0\n" \
	" lsl %0, #21\n" \
	" " instr " %0, %1, %0\n" \
	" .pushsection .pv_table,\"a\"\n" \
	" .long 0b - .\n" \
	" .popsection\n" \
	: "=&r" (to) \
	: "r" (from))

	#define __pv_add_carry_stub(x, y) \
	__asm__("@ __pv_add_carry_stub\n" \
	"0: movw %R0, #0\n" \
	" lsls %R0, #21\n" \
	" adds %Q0, %1, %R0\n" \
	"1: mvn %R0, #0\n" \
	" adc %R0, %R0, #0\n" \
	" .pushsection .pv_table,\"a\"\n" \
	" .long 0b - ., 1b - .\n" \
	" .popsection\n" \
	: "=&r" (y) \
	: "r" (x) \
	: "cc")
	#endif

	static inline phys_addr_t __virt_to_phys_nodebug(unsigned long x)
	{
	phys_addr_t t;

	if (sizeof(phys_addr_t) == 4) {
	__pv_stub(x, t, "add");
	} else {
	__pv_add_carry_stub(x, t);
	}
	return t;
	}

	static inline unsigned long __phys_to_virt(phys_addr_t x)
	{
	unsigned long t;

	/*
	* 'unsigned long' cast discard upper word when
	* phys_addr_t is 64 bit, and makes sure that inline
	* assembler expression receives 32 bit argument
	* in place where 'r' 32 bit operand is expected.
	*/
	__pv_stub((unsigned long) x, t, "sub");
	return t;
	}

	#else

	#define PHYS_OFFSET PLAT_PHYS_OFFSET
	#define PHYS_PFN_OFFSET ((unsigned long)(PHYS_OFFSET >> PAGE_SHIFT))

	static inline phys_addr_t __virt_to_phys_nodebug(unsigned long x)
	{
	return (phys_addr_t)x - PAGE_OFFSET + PHYS_OFFSET;
	}

	static inline unsigned long __phys_to_virt(phys_addr_t x)
	{
	return x - PHYS_OFFSET + PAGE_OFFSET;
	}

	#endif

	static inline unsigned long virt_to_pfn(const void *p)
	{
	unsigned long kaddr = (unsigned long)p;
	return (((kaddr - PAGE_OFFSET) >> PAGE_SHIFT) +
	PHYS_PFN_OFFSET);
	}
	#define __pa_symbol_nodebug(x) __virt_to_phys_nodebug((x))

	#ifdef CONFIG_DEBUG_VIRTUAL
	extern phys_addr_t __virt_to_phys(unsigned long x);
	extern phys_addr_t __phys_addr_symbol(unsigned long x);
	#else
	#define __virt_to_phys(x) __virt_to_phys_nodebug(x)
	#define __phys_addr_symbol(x) __pa_symbol_nodebug(x)
	#endif

	/*
	* These are only valid on the kernel direct mapped RAM memory.
	* Note: Drivers should NOT use these. They are the wrong
	* translation for translating DMA addresses. Use the driver
	* DMA support - see dma-mapping.h.
	*/
	#define virt_to_phys virt_to_phys
	static inline phys_addr_t virt_to_phys(const volatile void *x)
	{
	return __virt_to_phys((unsigned long)(x));
	}

	#define phys_to_virt phys_to_virt
	static inline void *phys_to_virt(phys_addr_t x)
	{
	return (void *)__phys_to_virt(x);
	}

	/*
	* Drivers should NOT use these either.
	*/
	#define __pa(x) __virt_to_phys((unsigned long)(x))
	#define __pa_symbol(x) __phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0))
	#define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x)))
	#define pfn_to_kaddr(pfn) __va((phys_addr_t)(pfn) << PAGE_SHIFT)

	extern long long arch_phys_to_idmap_offset;

	/*
	* These are for systems that have a hardware interconnect supported alias
	* of physical memory for idmap purposes. Most cases should leave these
	* untouched. Note: this can only return addresses less than 4GiB.
	*/
	static inline bool arm_has_idmap_alias(void)
	{
	return IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset != 0;
	}

	#define IDMAP_INVALID_ADDR ((u32)~0)

	static inline unsigned long phys_to_idmap(phys_addr_t addr)
	{
	if (IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset) {
	addr += arch_phys_to_idmap_offset;
	if (addr > (u32)~0)
	addr = IDMAP_INVALID_ADDR;
	}
	return addr;
	}

	static inline phys_addr_t idmap_to_phys(unsigned long idmap)
	{
	phys_addr_t addr = idmap;

	if (IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset)
	addr -= arch_phys_to_idmap_offset;

	return addr;
	}

	static inline unsigned long __virt_to_idmap(unsigned long x)
	{
	return phys_to_idmap(__virt_to_phys(x));
	}

	#define virt_to_idmap(x) __virt_to_idmap((unsigned long)(x))

	/*
	* Conversion between a struct page and a physical address.
	*
	* page_to_pfn(page) convert a struct page * to a PFN number
	* pfn_to_page(pfn) convert a _valid_ PFN number to struct page *
	*
	* virt_to_page(k) convert a _valid_ virtual address to struct page *
	* virt_addr_valid(k) indicates whether a virtual address is valid
	*/
	#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET

	#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr))
	#define virt_addr_valid(kaddr) (((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) \
	&& pfn_valid(virt_to_pfn(kaddr)))

	#endif

	#endif