| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Samsung's ExynosAuto v9 SoC device tree source |
| * |
| * Copyright (c) 2021 Samsung Electronics Co., Ltd. |
| * |
| */ |
| |
| #include <dt-bindings/clock/samsung,exynosautov9.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/soc/samsung,boot-mode.h> |
| #include <dt-bindings/soc/samsung,exynos-usi.h> |
| |
| / { |
| compatible = "samsung,exynosautov9"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| |
| interrupt-parent = <&gic>; |
| |
| aliases { |
| pinctrl0 = &pinctrl_alive; |
| pinctrl1 = &pinctrl_aud; |
| pinctrl2 = &pinctrl_fsys0; |
| pinctrl3 = &pinctrl_fsys1; |
| pinctrl4 = &pinctrl_fsys2; |
| pinctrl5 = &pinctrl_peric0; |
| pinctrl6 = &pinctrl_peric1; |
| }; |
| |
| arm-pmu { |
| compatible = "arm,cortex-a76-pmu"; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, |
| <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&cpu0>; |
| }; |
| core1 { |
| cpu = <&cpu1>; |
| }; |
| core2 { |
| cpu = <&cpu2>; |
| }; |
| core3 { |
| cpu = <&cpu3>; |
| }; |
| }; |
| |
| cluster1 { |
| core0 { |
| cpu = <&cpu4>; |
| }; |
| core1 { |
| cpu = <&cpu5>; |
| }; |
| core2 { |
| cpu = <&cpu6>; |
| }; |
| core3 { |
| cpu = <&cpu7>; |
| }; |
| }; |
| }; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a76"; |
| reg = <0x0>; |
| enable-method = "psci"; |
| }; |
| |
| cpu1: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a76"; |
| reg = <0x100>; |
| enable-method = "psci"; |
| }; |
| |
| cpu2: cpu@200 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a76"; |
| reg = <0x200>; |
| enable-method = "psci"; |
| }; |
| |
| cpu3: cpu@300 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a76"; |
| reg = <0x300>; |
| enable-method = "psci"; |
| }; |
| |
| cpu4: cpu@10000 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a76"; |
| reg = <0x10000>; |
| enable-method = "psci"; |
| }; |
| |
| cpu5: cpu@10100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a76"; |
| reg = <0x10100>; |
| enable-method = "psci"; |
| }; |
| |
| cpu6: cpu@10200 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a76"; |
| reg = <0x10200>; |
| enable-method = "psci"; |
| }; |
| |
| cpu7: cpu@10300 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a76"; |
| reg = <0x10300>; |
| enable-method = "psci"; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| cpu_suspend = <0xc4000001>; |
| cpu_off = <0x84000002>; |
| cpu_on = <0xc4000003>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| fixed-rate-clocks { |
| xtcxo: clock { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-output-names = "oscclk"; |
| }; |
| }; |
| |
| soc: soc@0 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x0 0x20000000>; |
| |
| chipid@10000000 { |
| compatible = "samsung,exynosautov9-chipid", |
| "samsung,exynos850-chipid"; |
| reg = <0x10000000 0x24>; |
| }; |
| |
| cmu_peris: clock-controller@10020000 { |
| compatible = "samsung,exynosautov9-cmu-peris"; |
| reg = <0x10020000 0x8000>; |
| #clock-cells = <1>; |
| |
| clocks = <&xtcxo>, |
| <&cmu_top DOUT_CLKCMU_PERIS_BUS>; |
| clock-names = "oscclk", |
| "dout_clkcmu_peris_bus"; |
| }; |
| |
| cmu_peric0: clock-controller@10200000 { |
| compatible = "samsung,exynosautov9-cmu-peric0"; |
| reg = <0x10200000 0x8000>; |
| #clock-cells = <1>; |
| |
| clocks = <&xtcxo>, |
| <&cmu_top DOUT_CLKCMU_PERIC0_BUS>, |
| <&cmu_top DOUT_CLKCMU_PERIC0_IP>; |
| clock-names = "oscclk", |
| "dout_clkcmu_peric0_bus", |
| "dout_clkcmu_peric0_ip"; |
| }; |
| |
| cmu_peric1: clock-controller@10800000 { |
| compatible = "samsung,exynosautov9-cmu-peric1"; |
| reg = <0x10800000 0x8000>; |
| #clock-cells = <1>; |
| |
| clocks = <&xtcxo>, |
| <&cmu_top DOUT_CLKCMU_PERIC1_BUS>, |
| <&cmu_top DOUT_CLKCMU_PERIC1_IP>; |
| clock-names = "oscclk", |
| "dout_clkcmu_peric1_bus", |
| "dout_clkcmu_peric1_ip"; |
| }; |
| |
| cmu_fsys1: clock-controller@17040000 { |
| compatible = "samsung,exynosautov9-cmu-fsys1"; |
| reg = <0x17040000 0x8000>; |
| #clock-cells = <1>; |
| |
| clocks = <&xtcxo>, |
| <&cmu_top DOUT_CLKCMU_FSYS1_BUS>, |
| <&cmu_top GOUT_CLKCMU_FSYS1_MMC_CARD>, |
| <&cmu_top DOUT_CLKCMU_FSYS1_USBDRD>; |
| clock-names = "oscclk", |
| "dout_clkcmu_fsys1_bus", |
| "gout_clkcmu_fsys1_mmc_card", |
| "dout_clkcmu_fsys1_usbdrd"; |
| }; |
| |
| cmu_fsys0: clock-controller@17700000 { |
| compatible = "samsung,exynosautov9-cmu-fsys0"; |
| reg = <0x17700000 0x8000>; |
| #clock-cells = <1>; |
| |
| clocks = <&xtcxo>, |
| <&cmu_top DOUT_CLKCMU_FSYS0_BUS>, |
| <&cmu_top DOUT_CLKCMU_FSYS0_PCIE>; |
| clock-names = "oscclk", |
| "dout_clkcmu_fsys0_bus", |
| "dout_clkcmu_fsys0_pcie"; |
| }; |
| |
| cmu_fsys2: clock-controller@17c00000 { |
| compatible = "samsung,exynosautov9-cmu-fsys2"; |
| reg = <0x17c00000 0x8000>; |
| #clock-cells = <1>; |
| |
| clocks = <&xtcxo>, |
| <&cmu_top DOUT_CLKCMU_FSYS2_BUS>, |
| <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>, |
| <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>; |
| clock-names = "oscclk", |
| "dout_clkcmu_fsys2_bus", |
| "dout_fsys2_clkcmu_ufs_embd", |
| "dout_fsys2_clkcmu_ethernet"; |
| }; |
| |
| cmu_core: clock-controller@1b030000 { |
| compatible = "samsung,exynosautov9-cmu-core"; |
| reg = <0x1b030000 0x8000>; |
| #clock-cells = <1>; |
| |
| clocks = <&xtcxo>, |
| <&cmu_top DOUT_CLKCMU_CORE_BUS>; |
| clock-names = "oscclk", |
| "dout_clkcmu_core_bus"; |
| }; |
| |
| cmu_busmc: clock-controller@1b200000 { |
| compatible = "samsung,exynosautov9-cmu-busmc"; |
| reg = <0x1b200000 0x8000>; |
| #clock-cells = <1>; |
| |
| clocks = <&xtcxo>, |
| <&cmu_top DOUT_CLKCMU_BUSMC_BUS>; |
| clock-names = "oscclk", |
| "dout_clkcmu_busmc_bus"; |
| }; |
| |
| cmu_top: clock-controller@1b240000 { |
| compatible = "samsung,exynosautov9-cmu-top"; |
| reg = <0x1b240000 0x8000>; |
| #clock-cells = <1>; |
| |
| clocks = <&xtcxo>; |
| clock-names = "oscclk"; |
| }; |
| |
| gic: interrupt-controller@10101000 { |
| compatible = "arm,gic-400"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x10101000 0x1000>, |
| <0x10102000 0x2000>, |
| <0x10104000 0x2000>, |
| <0x10106000 0x2000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | |
| IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| pdma0: dma-controller@1b2e0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x1b2e0000 0x1000>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu_busmc CLK_GOUT_BUSMC_PDMA0_PCLK>; |
| clock-names = "apb_pclk"; |
| arm,pl330-broken-no-flushp; |
| #dma-cells = <1>; |
| }; |
| |
| pinctrl_alive: pinctrl@10450000 { |
| compatible = "samsung,exynosautov9-pinctrl"; |
| reg = <0x10450000 0x1000>; |
| |
| wakeup-interrupt-controller { |
| compatible = "samsung,exynosautov9-wakeup-eint", |
| "samsung,exynos850-wakeup-eint", |
| "samsung,exynos7-wakeup-eint"; |
| }; |
| }; |
| |
| pinctrl_aud: pinctrl@19c60000 { |
| compatible = "samsung,exynosautov9-pinctrl"; |
| reg = <0x19c60000 0x1000>; |
| }; |
| |
| pinctrl_fsys0: pinctrl@17740000 { |
| compatible = "samsung,exynosautov9-pinctrl"; |
| reg = <0x17740000 0x1000>; |
| interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_fsys1: pinctrl@17060000 { |
| compatible = "samsung,exynosautov9-pinctrl"; |
| reg = <0x17060000 0x1000>; |
| interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_fsys2: pinctrl@17c30000 { |
| compatible = "samsung,exynosautov9-pinctrl"; |
| reg = <0x17c30000 0x1000>; |
| interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_peric0: pinctrl@10230000 { |
| compatible = "samsung,exynosautov9-pinctrl"; |
| reg = <0x10230000 0x1000>; |
| interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_peric1: pinctrl@10830000 { |
| compatible = "samsung,exynosautov9-pinctrl"; |
| reg = <0x10830000 0x1000>; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pmu_system_controller: system-controller@10460000 { |
| compatible = "samsung,exynosautov9-pmu", |
| "samsung,exynos7-pmu", "syscon"; |
| reg = <0x10460000 0x10000>; |
| |
| reboot: syscon-reboot { |
| compatible = "syscon-reboot"; |
| regmap = <&pmu_system_controller>; |
| offset = <0x3a00>; /* SYSTEM_CONFIGURATION */ |
| value = <0x2>; |
| mask = <0x2>; |
| }; |
| |
| reboot-mode { |
| compatible = "syscon-reboot-mode"; |
| offset = <0x810>; /* SYSIP_DAT0 */ |
| mode-bootloader = <EXYNOSAUTOV9_BOOT_BOOTLOADER>; |
| mode-fastboot = <EXYNOSAUTOV9_BOOT_FASTBOOT>; |
| mode-recovery = <EXYNOSAUTOV9_BOOT_RECOVERY>; |
| }; |
| }; |
| |
| syscon_fsys2: syscon@17c20000 { |
| compatible = "samsung,exynosautov9-fsys2-sysreg", |
| "samsung,exynosautov9-sysreg", "syscon"; |
| reg = <0x17c20000 0x1000>; |
| }; |
| |
| syscon_peric0: syscon@10220000 { |
| compatible = "samsung,exynosautov9-peric0-sysreg", |
| "samsung,exynosautov9-sysreg", "syscon"; |
| reg = <0x10220000 0x2000>; |
| }; |
| |
| syscon_peric1: syscon@10820000 { |
| compatible = "samsung,exynosautov9-peric1-sysreg", |
| "samsung,exynosautov9-sysreg", "syscon"; |
| reg = <0x10820000 0x2000>; |
| }; |
| |
| usi_0: usi@103000c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x103000c0 0x20>; |
| samsung,sysreg = <&syscon_peric0 0x1000>; |
| samsung,mode = <USI_V2_UART>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| serial_0: serial@10300000 { |
| compatible = "samsung,exynosautov9-uart", |
| "samsung,exynos850-uart"; |
| reg = <0x10300000 0xc0>; |
| interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>; |
| clock-names = "uart", "clk_uart_baud0"; |
| samsung,uart-fifosize = <256>; |
| status = "disabled"; |
| }; |
| |
| spi_0: spi@10300000 { |
| compatible = "samsung,exynosautov9-spi"; |
| reg = <0x10300000 0x30>; |
| interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_bus &spi0_cs_func>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>, |
| <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>; |
| clock-names = "spi", "spi_busclk0", "spi_ioclk"; |
| samsung,spi-src-clk = <0>; |
| dmas = <&pdma0 1>, <&pdma0 0>; |
| dma-names = "tx", "rx"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_0: i2c@10300000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10300000 0xc0>; |
| interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c0_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_i2c_0: usi@103100c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x103100c0 0x20>; |
| samsung,sysreg = <&syscon_peric0 0x1004>; |
| samsung,mode = <USI_V2_I2C>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_1>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_1>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| hsi2c_1: i2c@10310000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10310000 0xc0>; |
| interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c1_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_1>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_1>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_1: usi@103200c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x103200c0 0x20>; |
| samsung,sysreg = <&syscon_peric0 0x1008>; |
| samsung,mode = <USI_V2_UART>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| serial_1: serial@10320000 { |
| compatible = "samsung,exynosautov9-uart", |
| "samsung,exynos850-uart"; |
| reg = <0x10320000 0xc0>; |
| interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>; |
| clock-names = "uart", "clk_uart_baud0"; |
| samsung,uart-fifosize = <256>; |
| status = "disabled"; |
| }; |
| |
| spi_1: spi@10320000 { |
| compatible = "samsung,exynosautov9-spi"; |
| reg = <0x10320000 0x30>; |
| interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_bus &spi1_cs_func>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>, |
| <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>; |
| clock-names = "spi", "spi_busclk0", "spi_ioclk"; |
| samsung,spi-src-clk = <0>; |
| dmas = <&pdma0 3>, <&pdma0 2>; |
| dma-names = "tx", "rx"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_2: i2c@10320000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10320000 0xc0>; |
| interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c2_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_i2c_1: usi@103300c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x103300c0 0x20>; |
| samsung,sysreg = <&syscon_peric0 0x100c>; |
| samsung,mode = <USI_V2_I2C>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_3>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_3>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| hsi2c_3: i2c@10330000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10330000 0xc0>; |
| interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c3_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_3>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_3>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_2: usi@103400c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x103400c0 0x20>; |
| samsung,sysreg = <&syscon_peric0 0x1010>; |
| samsung,mode = <USI_V2_UART>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| serial_2: serial@10340000 { |
| compatible = "samsung,exynosautov9-uart", |
| "samsung,exynos850-uart"; |
| reg = <0x10340000 0xc0>; |
| interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>; |
| clock-names = "uart", "clk_uart_baud0"; |
| samsung,uart-fifosize = <64>; |
| status = "disabled"; |
| }; |
| |
| spi_2: spi@10340000 { |
| compatible = "samsung,exynosautov9-spi"; |
| reg = <0x10340000 0x30>; |
| interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_bus &spi2_cs_func>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>, |
| <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>; |
| clock-names = "spi", "spi_busclk0", "spi_ioclk"; |
| samsung,spi-src-clk = <0>; |
| dmas = <&pdma0 5>, <&pdma0 4>; |
| dma-names = "tx", "rx"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_4: i2c@10340000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10340000 0xc0>; |
| interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c4_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_i2c_2: usi@103500c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x103500c0 0x20>; |
| samsung,sysreg = <&syscon_peric0 0x1014>; |
| samsung,mode = <USI_V2_I2C>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_5>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_5>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| hsi2c_5: i2c@10350000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10350000 0xc0>; |
| interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c5_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_5>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_5>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_3: usi@103600c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x103600c0 0x20>; |
| samsung,sysreg = <&syscon_peric0 0x1018>; |
| samsung,mode = <USI_V2_UART>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| serial_3: serial@10360000 { |
| compatible = "samsung,exynosautov9-uart", |
| "samsung,exynos850-uart"; |
| reg = <0x10360000 0xc0>; |
| interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>; |
| clock-names = "uart", "clk_uart_baud0"; |
| samsung,uart-fifosize = <64>; |
| status = "disabled"; |
| }; |
| |
| spi_3: spi@10360000 { |
| compatible = "samsung,exynosautov9-spi"; |
| reg = <0x10360000 0x30>; |
| interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi3_bus &spi3_cs_func>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>, |
| <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>; |
| clock-names = "spi", "spi_busclk0", "spi_ioclk"; |
| samsung,spi-src-clk = <0>; |
| dmas = <&pdma0 7>, <&pdma0 6>; |
| dma-names = "tx", "rx"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_6: i2c@10360000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10360000 0xc0>; |
| interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c6_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_i2c_3: usi@103700c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x103700c0 0x20>; |
| samsung,sysreg = <&syscon_peric0 0x101c>; |
| samsung,mode = <USI_V2_I2C>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_7>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_7>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| hsi2c_7: i2c@10370000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10370000 0xc0>; |
| interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c7_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_7>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_7>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_4: usi@103800c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x103800c0 0x20>; |
| samsung,sysreg = <&syscon_peric0 0x1020>; |
| samsung,mode = <USI_V2_UART>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| serial_4: serial@10380000 { |
| compatible = "samsung,exynosautov9-uart", |
| "samsung,exynos850-uart"; |
| reg = <0x10380000 0xc0>; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart4_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>; |
| clock-names = "uart", "clk_uart_baud0"; |
| samsung,uart-fifosize = <64>; |
| status = "disabled"; |
| }; |
| |
| spi_4: spi@10380000 { |
| compatible = "samsung,exynosautov9-spi"; |
| reg = <0x10380000 0x30>; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi4_bus &spi4_cs_func>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>, |
| <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>; |
| clock-names = "spi", "spi_busclk0", "spi_ioclk"; |
| samsung,spi-src-clk = <0>; |
| dmas = <&pdma0 9>, <&pdma0 8>; |
| dma-names = "tx", "rx"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_8: i2c@10380000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10380000 0xc0>; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c8_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_i2c_4: usi@103900c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x103900c0 0x20>; |
| samsung,sysreg = <&syscon_peric0 0x1024>; |
| samsung,mode = <USI_V2_I2C>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_9>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_9>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| hsi2c_9: i2c@10390000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10390000 0xc0>; |
| interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c9_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_9>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_9>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_5: usi@103a00c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x103a00c0 0x20>; |
| samsung,sysreg = <&syscon_peric0 0x1028>; |
| samsung,mode = <USI_V2_UART>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| serial_5: serial@103a0000 { |
| compatible = "samsung,exynosautov9-uart", |
| "samsung,exynos850-uart"; |
| reg = <0x103a0000 0xc0>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart5_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>; |
| clock-names = "uart", "clk_uart_baud0"; |
| samsung,uart-fifosize = <64>; |
| status = "disabled"; |
| }; |
| |
| spi_5: spi@103a0000 { |
| compatible = "samsung,exynosautov9-spi"; |
| reg = <0x103a0000 0x30>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi5_bus &spi5_cs_func>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>, |
| <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>; |
| clock-names = "spi", "spi_busclk0", "spi_ioclk"; |
| samsung,spi-src-clk = <0>; |
| dmas = <&pdma0 11>, <&pdma0 10>; |
| dma-names = "tx", "rx"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_10: i2c@103a0000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x103a0000 0xc0>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c10_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_i2c_5: usi@103b00c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x103b00c0 0x20>; |
| samsung,sysreg = <&syscon_peric0 0x102c>; |
| samsung,mode = <USI_V2_I2C>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_11>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_11>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| hsi2c_11: i2c@103b0000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x103b0000 0xc0>; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c11_bus>; |
| clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_11>, |
| <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_11>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_6: usi@109000c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x109000c0 0x20>; |
| samsung,sysreg = <&syscon_peric1 0x1000>; |
| samsung,mode = <USI_V2_UART>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| serial_6: serial@10900000 { |
| compatible = "samsung,exynosautov9-uart", |
| "samsung,exynos850-uart"; |
| reg = <0x10900000 0xc0>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart6_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>; |
| clock-names = "uart", "clk_uart_baud0"; |
| samsung,uart-fifosize = <256>; |
| status = "disabled"; |
| }; |
| |
| spi_6: spi@10900000 { |
| compatible = "samsung,exynosautov9-spi"; |
| reg = <0x10900000 0x30>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi6_bus &spi6_cs_func>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>, |
| <&cmu_peric1 CLK_DOUT_PERIC1_USI06_USI>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>; |
| clock-names = "spi", "spi_busclk0", "spi_ioclk"; |
| samsung,spi-src-clk = <0>; |
| dmas = <&pdma0 13>, <&pdma0 12>; |
| dma-names = "tx", "rx"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_12: i2c@10900000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10900000 0xc0>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c12_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_i2c_6: usi@109100c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x109100c0 0x20>; |
| samsung,sysreg = <&syscon_peric1 0x1004>; |
| samsung,mode = <USI_V2_I2C>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_1>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_1>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| hsi2c_13: i2c@10910000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10910000 0xc0>; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c13_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_1>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_1>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_7: usi@109200c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x109200c0 0x20>; |
| samsung,sysreg = <&syscon_peric1 0x1008>; |
| samsung,mode = <USI_V2_UART>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| serial_7: serial@10920000 { |
| compatible = "samsung,exynosautov9-uart", |
| "samsung,exynos850-uart"; |
| reg = <0x10920000 0xc0>; |
| interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart7_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>; |
| clock-names = "uart", "clk_uart_baud0"; |
| samsung,uart-fifosize = <64>; |
| status = "disabled"; |
| }; |
| |
| spi_7: spi@10920000 { |
| compatible = "samsung,exynosautov9-spi"; |
| reg = <0x10920000 0x30>; |
| interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi7_bus &spi7_cs_func>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>, |
| <&cmu_peric1 CLK_DOUT_PERIC1_USI07_USI>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>; |
| clock-names = "spi", "spi_busclk0", "spi_ioclk"; |
| samsung,spi-src-clk = <0>; |
| dmas = <&pdma0 15>, <&pdma0 14>; |
| dma-names = "tx", "rx"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_14: i2c@10920000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10920000 0xc0>; |
| interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c14_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_i2c_7: usi@109300c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x109300c0 0x20>; |
| samsung,sysreg = <&syscon_peric1 0x100c>; |
| samsung,mode = <USI_V2_I2C>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_3>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_3>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| hsi2c_15: i2c@10930000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10930000 0xc0>; |
| interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c15_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_3>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_3>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_8: usi@109400c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x109400c0 0x20>; |
| samsung,sysreg = <&syscon_peric1 0x1010>; |
| samsung,mode = <USI_V2_UART>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| serial_8: serial@10940000 { |
| compatible = "samsung,exynosautov9-uart", |
| "samsung,exynos850-uart"; |
| reg = <0x10940000 0xc0>; |
| interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart8_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>; |
| clock-names = "uart", "clk_uart_baud0"; |
| samsung,uart-fifosize = <64>; |
| status = "disabled"; |
| }; |
| |
| spi_8: spi@10940000 { |
| compatible = "samsung,exynosautov9-spi"; |
| reg = <0x10940000 0x30>; |
| interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi8_bus &spi8_cs_func>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>, |
| <&cmu_peric1 CLK_DOUT_PERIC1_USI08_USI>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>; |
| clock-names = "spi", "spi_busclk0", "spi_ioclk"; |
| samsung,spi-src-clk = <0>; |
| dmas = <&pdma0 17>, <&pdma0 16>; |
| dma-names = "tx", "rx"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_16: i2c@10940000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10940000 0xc0>; |
| interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c16_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_i2c_8: usi@109500c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x109500c0 0x20>; |
| samsung,sysreg = <&syscon_peric1 0x1014>; |
| samsung,mode = <USI_V2_I2C>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_5>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_5>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| hsi2c_17: i2c@10950000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10950000 0xc0>; |
| interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c17_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_5>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_5>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_9: usi@109600c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x109600c0 0x20>; |
| samsung,sysreg = <&syscon_peric1 0x1018>; |
| samsung,mode = <USI_V2_UART>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| serial_9: serial@10960000 { |
| compatible = "samsung,exynosautov9-uart", |
| "samsung,exynos850-uart"; |
| reg = <0x10960000 0xc0>; |
| interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart9_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>; |
| clock-names = "uart", "clk_uart_baud0"; |
| samsung,uart-fifosize = <64>; |
| status = "disabled"; |
| }; |
| |
| spi_9: spi@10960000 { |
| compatible = "samsung,exynosautov9-spi"; |
| reg = <0x10960000 0x30>; |
| interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi9_bus &spi9_cs_func>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>, |
| <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>; |
| clock-names = "spi", "spi_busclk0", "spi_ioclk"; |
| samsung,spi-src-clk = <0>; |
| dmas = <&pdma0 19>, <&pdma0 18>; |
| dma-names = "tx", "rx"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_18: i2c@10960000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10960000 0xc0>; |
| interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c18_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_i2c_9: usi@109700c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x109700c0 0x20>; |
| samsung,sysreg = <&syscon_peric1 0x101c>; |
| samsung,mode = <USI_V2_I2C>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_7>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_7>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| hsi2c_19: i2c@10970000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10970000 0xc0>; |
| interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c19_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_7>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_7>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_10: usi@109800c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x109800c0 0x20>; |
| samsung,sysreg = <&syscon_peric1 0x1020>; |
| samsung,mode = <USI_V2_UART>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| serial_10: serial@10980000 { |
| compatible = "samsung,exynosautov9-uart", |
| "samsung,exynos850-uart"; |
| reg = <0x10980000 0xc0>; |
| interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart10_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>; |
| clock-names = "uart", "clk_uart_baud0"; |
| samsung,uart-fifosize = <64>; |
| status = "disabled"; |
| }; |
| |
| spi_10: spi@10980000 { |
| compatible = "samsung,exynosautov9-spi"; |
| reg = <0x10980000 0x30>; |
| interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi10_bus &spi10_cs_func>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>, |
| <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>; |
| clock-names = "spi", "spi_busclk0", "spi_ioclk"; |
| samsung,spi-src-clk = <0>; |
| dmas = <&pdma0 21>, <&pdma0 20>; |
| dma-names = "tx", "rx"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_20: i2c@10980000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10980000 0xc0>; |
| interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c20_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_i2c_10: usi@109900c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x109900c0 0x20>; |
| samsung,sysreg = <&syscon_peric1 0x1024>; |
| samsung,mode = <USI_V2_I2C>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_9>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_9>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| hsi2c_21: i2c@10990000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x10990000 0xc0>; |
| interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c21_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_9>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_9>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_11: usi@109a00c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x109a00c0 0x20>; |
| samsung,sysreg = <&syscon_peric1 0x1028>; |
| samsung,mode = <USI_V2_UART>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| serial_11: serial@109a0000 { |
| compatible = "samsung,exynosautov9-uart", |
| "samsung,exynos850-uart"; |
| reg = <0x109a0000 0xc0>; |
| interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart11_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>; |
| clock-names = "uart", "clk_uart_baud0"; |
| samsung,uart-fifosize = <64>; |
| status = "disabled"; |
| }; |
| |
| spi_11: spi@109a0000 { |
| compatible = "samsung,exynosautov9-spi"; |
| reg = <0x109a0000 0x30>; |
| interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi11_bus &spi11_cs_func>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>, |
| <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>; |
| clock-names = "spi", "spi_busclk0", "spi_ioclk"; |
| samsung,spi-src-clk = <0>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_22: i2c@109a0000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x109a0000 0xc0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c22_bus>; |
| interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usi_i2c_11: usi@109b00c0 { |
| compatible = "samsung,exynosautov9-usi", |
| "samsung,exynos850-usi"; |
| reg = <0x109b00c0 0x20>; |
| samsung,sysreg = <&syscon_peric1 0x102c>; |
| samsung,mode = <USI_V2_I2C>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_11>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_11>; |
| clock-names = "pclk", "ipclk"; |
| status = "disabled"; |
| |
| hsi2c_23: i2c@109b0000 { |
| compatible = "samsung,exynosautov9-hsi2c"; |
| reg = <0x109b0000 0xc0>; |
| interrupts = <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hsi2c23_bus>; |
| clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_11>, |
| <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_11>; |
| clock-names = "hsi2c", "hsi2c_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| ufs_0_phy: phy@17e04000 { |
| compatible = "samsung,exynosautov9-ufs-phy"; |
| reg = <0x17e04000 0xc00>; |
| reg-names = "phy-pma"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| #phy-cells = <0>; |
| clocks = <&xtcxo>; |
| clock-names = "ref_clk"; |
| status = "disabled"; |
| }; |
| |
| ufs_0: ufs@17e00000 { |
| compatible = "samsung,exynosautov9-ufs"; |
| |
| reg = <0x17e00000 0x100>, |
| <0x17e01100 0x410>, |
| <0x17e80000 0x8000>, |
| <0x17dc0000 0x2200>; |
| reg-names = "hci", "vs_hci", "unipro", "ufsp"; |
| interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_ACLK>, |
| <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO>; |
| clock-names = "core_clk", "sclk_unipro_main"; |
| freq-table-hz = <0 0>, <0 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; |
| phys = <&ufs_0_phy>; |
| phy-names = "ufs-phy"; |
| samsung,sysreg = <&syscon_fsys2 0x710>; |
| status = "disabled"; |
| }; |
| |
| ufs_1_phy: phy@17f04000 { |
| compatible = "samsung,exynosautov9-ufs-phy"; |
| reg = <0x17f04000 0xc00>; |
| reg-names = "phy-pma"; |
| samsung,pmu-syscon = <&pmu_system_controller 0x72c>; |
| #phy-cells = <0>; |
| clocks = <&xtcxo>; |
| clock-names = "ref_clk"; |
| status = "disabled"; |
| }; |
| |
| ufs_1: ufs@17f00000 { |
| compatible = "samsung,exynosautov9-ufs"; |
| |
| reg = <0x17f00000 0x100>, |
| <0x17f01100 0x410>, |
| <0x17f80000 0x8000>, |
| <0x17de0000 0x2200>; |
| reg-names = "hci", "vs_hci", "unipro", "ufsp"; |
| interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD1_ACLK>, |
| <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD1_UNIPRO>; |
| clock-names = "core_clk", "sclk_unipro_main"; |
| freq-table-hz = <0 0>, <0 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ufs_rst_n_1 &ufs_refclk_out_1>; |
| phys = <&ufs_1_phy>; |
| phy-names = "ufs-phy"; |
| samsung,sysreg = <&syscon_fsys2 0x714>; |
| status = "disabled"; |
| }; |
| |
| watchdog_cl0: watchdog@10050000 { |
| compatible = "samsung,exynosautov9-wdt"; |
| reg = <0x10050000 0x100>; |
| interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu_peris CLK_GOUT_WDT_CLUSTER0>, <&xtcxo>; |
| clock-names = "watchdog", "watchdog_src"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| samsung,cluster-index = <0>; |
| }; |
| |
| watchdog_cl1: watchdog@10060000 { |
| compatible = "samsung,exynosautov9-wdt"; |
| reg = <0x10060000 0x100>; |
| interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu_peris CLK_GOUT_WDT_CLUSTER1>, <&xtcxo>; |
| clock-names = "watchdog", "watchdog_src"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| samsung,cluster-index = <1>; |
| }; |
| |
| pwm: pwm@103f0000 { |
| compatible = "samsung,exynosautov9-pwm", |
| "samsung,exynos4210-pwm"; |
| reg = <0x103f0000 0x100>; |
| samsung,pwm-outputs = <0>, <1>, <2>, <3>; |
| #pwm-cells = <3>; |
| clocks = <&xtcxo>; |
| clock-names = "timers"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| #include "exynosautov9-pinctrl.dtsi" |
