| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Author: Frank Wunderlich <frank-w@public-files.de> |
| * |
| */ |
| |
| /dts-v1/; |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/leds/common.h> |
| #include <dt-bindings/pinctrl/rockchip.h> |
| #include <dt-bindings/soc/rockchip,vop2.h> |
| #include "rk3568.dtsi" |
| |
| / { |
| model = "Bananapi-R2 Pro (RK3568) DDR4 Board"; |
| compatible = "sinovoip,rk3568-bpi-r2pro", "rockchip,rk3568"; |
| |
| aliases { |
| ethernet0 = &gmac0; |
| ethernet1 = &gmac1; |
| mmc0 = &sdmmc0; |
| mmc1 = &sdhci; |
| }; |
| |
| chosen: chosen { |
| stdout-path = "serial2:1500000n8"; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blue_led_pin &green_led_pin>; |
| |
| blue_led: led-0 { |
| color = <LED_COLOR_ID_BLUE>; |
| default-state = "off"; |
| function = LED_FUNCTION_STATUS; |
| gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| green_led: led-1 { |
| color = <LED_COLOR_ID_GREEN>; |
| default-state = "on"; |
| function = LED_FUNCTION_POWER; |
| gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| dc_12v: dc-12v-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "dc_12v"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <12000000>; |
| regulator-max-microvolt = <12000000>; |
| }; |
| |
| hdmi-con { |
| compatible = "hdmi-connector"; |
| type = "a"; |
| |
| port { |
| hdmi_con_in: endpoint { |
| remote-endpoint = <&hdmi_out_con>; |
| }; |
| }; |
| }; |
| |
| ir-receiver { |
| compatible = "gpio-ir-receiver"; |
| gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ir_receiver_pin>; |
| }; |
| |
| vcc3v3_sys: vcc3v3-sys-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc3v3_sys"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&dc_12v>; |
| }; |
| |
| vcc5v0_sys: vcc5v0-sys-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc5v0_sys"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <&dc_12v>; |
| }; |
| |
| pcie30_avdd0v9: pcie30-avdd0v9-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "pcie30_avdd0v9"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <900000>; |
| vin-supply = <&vcc3v3_sys>; |
| }; |
| |
| pcie30_avdd1v8: pcie30-avdd1v8-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "pcie30_avdd1v8"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vcc3v3_sys>; |
| }; |
| |
| /* pi6c pcie clock generator feeds both ports */ |
| vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc3v3_pcie"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| enable-active-high; |
| gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; |
| startup-delay-us = <200000>; |
| vin-supply = <&vcc5v0_sys>; |
| }; |
| |
| /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ |
| vcc3v3_minipcie: vcc3v3-minipcie-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc3v3_minipcie"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| enable-active-high; |
| gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&minipcie_enable_h>; |
| startup-delay-us = <50000>; |
| vin-supply = <&vcc3v3_pi6c_05>; |
| }; |
| |
| /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ |
| vcc3v3_ngff: vcc3v3-ngff-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc3v3_ngff"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| enable-active-high; |
| gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ngffpcie_enable_h>; |
| startup-delay-us = <50000>; |
| vin-supply = <&vcc3v3_pi6c_05>; |
| }; |
| |
| vcc5v0_usb: vcc5v0-usb-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc5v0_usb"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <&dc_12v>; |
| }; |
| |
| vcc5v0_usb_host: vcc5v0-usb-host-regulator { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&vcc5v0_usb_host_en>; |
| regulator-name = "vcc5v0_usb_host"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <&vcc5v0_usb>; |
| }; |
| |
| vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&vcc5v0_usb_otg_en>; |
| regulator-name = "vcc5v0_usb_otg"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <&vcc5v0_usb>; |
| }; |
| }; |
| |
| &combphy0 { |
| /* used for USB3 */ |
| status = "okay"; |
| }; |
| |
| &combphy1 { |
| /* used for USB3 */ |
| status = "okay"; |
| }; |
| |
| &combphy2 { |
| /* used for SATA */ |
| status = "okay"; |
| }; |
| |
| &gmac0 { |
| assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; |
| assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; |
| clock_in_out = "input"; |
| phy-mode = "rgmii"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gmac0_miim |
| &gmac0_tx_bus2 |
| &gmac0_rx_bus2 |
| &gmac0_rgmii_clk |
| &gmac0_rgmii_bus>; |
| snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; |
| snps,reset-active-low; |
| /* Reset time is 20ms, 100ms for rtl8211f */ |
| snps,reset-delays-us = <0 20000 100000>; |
| tx_delay = <0x4f>; |
| rx_delay = <0x0f>; |
| status = "okay"; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| pause; |
| }; |
| }; |
| |
| &gmac1 { |
| assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; |
| assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; |
| clock_in_out = "output"; |
| phy-handle = <&rgmii_phy1>; |
| phy-mode = "rgmii"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gmac1m1_miim |
| &gmac1m1_tx_bus2 |
| &gmac1m1_rx_bus2 |
| &gmac1m1_rgmii_clk |
| &gmac1m1_rgmii_bus>; |
| |
| snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; |
| snps,reset-active-low; |
| /* Reset time is 20ms, 100ms for rtl8211f */ |
| snps,reset-delays-us = <0 20000 100000>; |
| |
| tx_delay = <0x3c>; |
| rx_delay = <0x2f>; |
| |
| status = "okay"; |
| }; |
| |
| &gpu { |
| mali-supply = <&vdd_gpu>; |
| status = "okay"; |
| }; |
| |
| &hdmi { |
| avdd-0v9-supply = <&vdda0v9_image>; |
| avdd-1v8-supply = <&vcca1v8_image>; |
| status = "okay"; |
| }; |
| |
| &hdmi_in { |
| hdmi_in_vp0: endpoint { |
| remote-endpoint = <&vp0_out_hdmi>; |
| }; |
| }; |
| |
| &hdmi_out { |
| hdmi_out_con: endpoint { |
| remote-endpoint = <&hdmi_con_in>; |
| }; |
| }; |
| |
| &hdmi_sound { |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| |
| rk809: pmic@20 { |
| compatible = "rockchip,rk809"; |
| reg = <0x20>; |
| interrupt-parent = <&gpio0>; |
| interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; |
| #clock-cells = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pmic_int>; |
| rockchip,system-power-controller; |
| vcc1-supply = <&vcc3v3_sys>; |
| vcc2-supply = <&vcc3v3_sys>; |
| vcc3-supply = <&vcc3v3_sys>; |
| vcc4-supply = <&vcc3v3_sys>; |
| vcc5-supply = <&vcc3v3_sys>; |
| vcc6-supply = <&vcc3v3_sys>; |
| vcc7-supply = <&vcc3v3_sys>; |
| vcc8-supply = <&vcc3v3_sys>; |
| vcc9-supply = <&vcc3v3_sys>; |
| wakeup-source; |
| |
| regulators { |
| vdd_logic: DCDC_REG1 { |
| regulator-name = "vdd_logic"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-initial-mode = <0x2>; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1350000>; |
| regulator-ramp-delay = <6001>; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vdd_gpu: DCDC_REG2 { |
| regulator-name = "vdd_gpu"; |
| regulator-always-on; |
| regulator-initial-mode = <0x2>; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1350000>; |
| regulator-ramp-delay = <6001>; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vcc_ddr: DCDC_REG3 { |
| regulator-name = "vcc_ddr"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-initial-mode = <0x2>; |
| |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| }; |
| }; |
| |
| vdd_npu: DCDC_REG4 { |
| regulator-name = "vdd_npu"; |
| regulator-initial-mode = <0x2>; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1350000>; |
| regulator-ramp-delay = <6001>; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vcc_1v8: DCDC_REG5 { |
| regulator-name = "vcc_1v8"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vdda0v9_image: LDO_REG1 { |
| regulator-name = "vdda0v9_image"; |
| regulator-always-on; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <900000>; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vdda_0v9: LDO_REG2 { |
| regulator-name = "vdda_0v9"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <900000>; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vdda0v9_pmu: LDO_REG3 { |
| regulator-name = "vdda0v9_pmu"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <900000>; |
| |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| regulator-suspend-microvolt = <900000>; |
| }; |
| }; |
| |
| vccio_acodec: LDO_REG4 { |
| regulator-name = "vccio_acodec"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vccio_sd: LDO_REG5 { |
| regulator-name = "vccio_sd"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vcc3v3_pmu: LDO_REG6 { |
| regulator-name = "vcc3v3_pmu"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| regulator-suspend-microvolt = <3300000>; |
| }; |
| }; |
| |
| vcca_1v8: LDO_REG7 { |
| regulator-name = "vcca_1v8"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vcca1v8_pmu: LDO_REG8 { |
| regulator-name = "vcca1v8_pmu"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| regulator-suspend-microvolt = <1800000>; |
| }; |
| }; |
| |
| vcca1v8_image: LDO_REG9 { |
| regulator-name = "vcca1v8_image"; |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vcc_3v3: SWITCH_REG1 { |
| regulator-name = "vcc_3v3"; |
| regulator-always-on; |
| regulator-boot-on; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vcc3v3_sd: SWITCH_REG2 { |
| regulator-name = "vcc3v3_sd"; |
| regulator-always-on; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c3 { |
| status = "okay"; |
| |
| hym8563: rtc@51 { |
| compatible = "haoyu,hym8563"; |
| reg = <0x51>; |
| interrupt-parent = <&gpio0>; |
| interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>; |
| #clock-cells = <0>; |
| clock-output-names = "rtcic_32kout"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hym8563_int>; |
| wakeup-source; |
| }; |
| }; |
| |
| &i2c5 { |
| /* pin 3 (SDA) + 4 (SCL) of header con2 */ |
| status = "disabled"; |
| }; |
| |
| &i2s0_8ch { |
| /* hdmi sound */ |
| status = "okay"; |
| }; |
| |
| &mdio0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| switch@0 { |
| compatible = "mediatek,mt7531"; |
| reg = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@1 { |
| reg = <1>; |
| label = "lan0"; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| label = "lan1"; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| label = "lan2"; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| label = "lan3"; |
| }; |
| |
| port@5 { |
| reg = <5>; |
| label = "cpu"; |
| ethernet = <&gmac0>; |
| phy-mode = "rgmii"; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| pause; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &mdio1 { |
| rgmii_phy1: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0x0>; |
| }; |
| }; |
| |
| &pcie30phy { |
| data-lanes = <1 2>; |
| phy-supply = <&vcc3v3_pi6c_05>; |
| status = "okay"; |
| }; |
| |
| &pcie3x1 { |
| /* M.2 slot */ |
| num-lanes = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ngffpcie_reset_h>; |
| reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; |
| vpcie3v3-supply = <&vcc3v3_ngff>; |
| status = "okay"; |
| }; |
| |
| &pcie3x2 { |
| /* mPCIe slot */ |
| num-lanes = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&minipcie_reset_h>; |
| reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; |
| vpcie3v3-supply = <&vcc3v3_minipcie>; |
| status = "okay"; |
| }; |
| |
| &pinctrl { |
| leds { |
| blue_led_pin: blue-led-pin { |
| rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| green_led_pin: green-led-pin { |
| rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| hym8563 { |
| hym8563_int: hym8563-int { |
| rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| ir-receiver { |
| ir_receiver_pin: ir-receiver-pin { |
| rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| pcie { |
| minipcie_enable_h: minipcie-enable-h { |
| rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; |
| }; |
| |
| ngffpcie_enable_h: ngffpcie-enable-h { |
| rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; |
| }; |
| |
| minipcie_reset_h: minipcie-reset-h { |
| rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; |
| }; |
| |
| ngffpcie_reset_h: ngffpcie-reset-h { |
| rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; |
| }; |
| }; |
| |
| pmic { |
| pmic_int: pmic_int { |
| rockchip,pins = |
| <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| }; |
| }; |
| |
| usb { |
| vcc5v0_usb_host_en: vcc5v0_usb_host_en { |
| rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| |
| vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { |
| rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| }; |
| |
| &pmu_io_domains { |
| pmuio1-supply = <&vcc3v3_pmu>; |
| pmuio2-supply = <&vcc3v3_pmu>; |
| vccio1-supply = <&vccio_acodec>; |
| vccio3-supply = <&vccio_sd>; |
| vccio4-supply = <&vcc_3v3>; |
| vccio5-supply = <&vcc_3v3>; |
| vccio6-supply = <&vcc_1v8>; |
| vccio7-supply = <&vcc_3v3>; |
| status = "okay"; |
| }; |
| |
| &pwm8 { |
| /* fan 5v - gnd - pwm */ |
| status = "okay"; |
| }; |
| |
| &pwm10 { |
| /* pin 7 of header con2 */ |
| status = "disabled"; |
| }; |
| |
| &pwm11 { |
| /* pin 15 of header con2 */ |
| status = "disabled"; |
| }; |
| |
| &pwm12 { |
| /* pin 21 of header con2 */ |
| /* shared with uart9 + spi3 */ |
| pinctrl-0 = <&pwm12m1_pins>; |
| status = "disabled"; |
| }; |
| |
| &pwm13 { |
| /* pin 24 of header con2 */ |
| /* shared with uart9 */ |
| pinctrl-0 = <&pwm13m1_pins>; |
| status = "disabled"; |
| }; |
| |
| &pwm14 { |
| /* pin 23 of header con2 */ |
| /* shared with spi3 */ |
| pinctrl-0 = <&pwm14m1_pins>; |
| status = "disabled"; |
| }; |
| |
| &pwm15 { |
| /* pin 19 of header con2 */ |
| /* shared with spi3 */ |
| pinctrl-0 = <&pwm15m1_pins>; |
| status = "disabled"; |
| }; |
| |
| &saradc { |
| vref-supply = <&vcca_1v8>; |
| status = "okay"; |
| }; |
| |
| &sata2 { |
| status = "okay"; |
| }; |
| |
| &sdhci { |
| bus-width = <8>; |
| max-frequency = <200000000>; |
| non-removable; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; |
| status = "okay"; |
| }; |
| |
| &sdmmc0 { |
| bus-width = <4>; |
| cap-sd-highspeed; |
| cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| disable-wp; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; |
| sd-uhs-sdr104; |
| vmmc-supply = <&vcc3v3_sd>; |
| vqmmc-supply = <&vccio_sd>; |
| status = "okay"; |
| }; |
| |
| &spi3 { |
| /* pin 19 (MO) + 21 (MI) + 23 (CK) of header con2 */ |
| /* shared with pwm12/14/15 and uart9 */ |
| pinctrl-0 = <&spi3m1_pins>; |
| status = "disabled"; |
| }; |
| |
| &tsadc { |
| rockchip,hw-tshut-mode = <1>; |
| rockchip,hw-tshut-polarity = <0>; |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| /* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */ |
| status = "disabled"; |
| }; |
| |
| &uart2 { |
| /* debug-uart */ |
| status = "okay"; |
| }; |
| |
| &uart7 { |
| /* pin 11 (TX) + 13 (RX) of header con2 */ |
| pinctrl-0 = <&uart7m1_xfer>; |
| status = "disabled"; |
| }; |
| |
| &uart9 { |
| /* pin 21 (TX) + 24 (RX) of header con2 */ |
| /* shared with pwm13 and pwm12/spi3 */ |
| pinctrl-0 = <&uart9m1_xfer>; |
| status = "disabled"; |
| }; |
| |
| &usb_host0_ehci { |
| status = "okay"; |
| }; |
| |
| &usb_host0_ohci { |
| status = "okay"; |
| }; |
| |
| &usb_host0_xhci { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usb_host1_ehci { |
| status = "okay"; |
| }; |
| |
| &usb_host1_ohci { |
| status = "okay"; |
| }; |
| |
| &usb_host1_xhci { |
| status = "okay"; |
| }; |
| |
| &usb2phy0 { |
| status = "okay"; |
| }; |
| |
| &usb2phy0_host { |
| phy-supply = <&vcc5v0_usb_host>; |
| status = "okay"; |
| }; |
| |
| &usb2phy0_otg { |
| phy-supply = <&vcc5v0_usb_otg>; |
| status = "okay"; |
| }; |
| |
| &usb2phy1 { |
| /* USB for PCIe/M2 */ |
| status = "okay"; |
| }; |
| |
| &usb2phy1_host { |
| status = "okay"; |
| }; |
| |
| &usb2phy1_otg { |
| status = "okay"; |
| }; |
| |
| &vop { |
| assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; |
| assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| status = "okay"; |
| }; |
| |
| &vop_mmu { |
| status = "okay"; |
| }; |
| |
| &vp0 { |
| vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| remote-endpoint = <&hdmi_in_vp0>; |
| }; |
| }; |
