| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (c) 2021, Linaro Ltd <loic.poulain@linaro.org> */ |
| #include <linux/kernel.h> |
| #include <linux/mhi.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/wwan.h> |
| |
| /* MHI wwan flags */ |
| enum mhi_wwan_flags { |
| MHI_WWAN_DL_CAP, |
| MHI_WWAN_UL_CAP, |
| MHI_WWAN_RX_REFILL, |
| }; |
| |
| #define MHI_WWAN_MAX_MTU 0x8000 |
| |
| struct mhi_wwan_dev { |
| /* Lower level is a mhi dev, upper level is a wwan port */ |
| struct mhi_device *mhi_dev; |
| struct wwan_port *wwan_port; |
| |
| /* State and capabilities */ |
| unsigned long flags; |
| size_t mtu; |
| |
| /* Protect against concurrent TX and TX-completion (bh) */ |
| spinlock_t tx_lock; |
| |
| /* Protect RX budget and rx_refill scheduling */ |
| spinlock_t rx_lock; |
| struct work_struct rx_refill; |
| |
| /* RX budget is initially set to the size of the MHI RX queue and is |
| * used to limit the number of allocated and queued packets. It is |
| * decremented on data queueing and incremented on data release. |
| */ |
| unsigned int rx_budget; |
| }; |
| |
| /* Increment RX budget and schedule RX refill if necessary */ |
| static void mhi_wwan_rx_budget_inc(struct mhi_wwan_dev *mhiwwan) |
| { |
| spin_lock_bh(&mhiwwan->rx_lock); |
| |
| mhiwwan->rx_budget++; |
| |
| if (test_bit(MHI_WWAN_RX_REFILL, &mhiwwan->flags)) |
| schedule_work(&mhiwwan->rx_refill); |
| |
| spin_unlock_bh(&mhiwwan->rx_lock); |
| } |
| |
| /* Decrement RX budget if non-zero and return true on success */ |
| static bool mhi_wwan_rx_budget_dec(struct mhi_wwan_dev *mhiwwan) |
| { |
| bool ret = false; |
| |
| spin_lock_bh(&mhiwwan->rx_lock); |
| |
| if (mhiwwan->rx_budget) { |
| mhiwwan->rx_budget--; |
| if (test_bit(MHI_WWAN_RX_REFILL, &mhiwwan->flags)) |
| ret = true; |
| } |
| |
| spin_unlock_bh(&mhiwwan->rx_lock); |
| |
| return ret; |
| } |
| |
| static void __mhi_skb_destructor(struct sk_buff *skb) |
| { |
| /* RX buffer has been consumed, increase the allowed budget */ |
| mhi_wwan_rx_budget_inc(skb_shinfo(skb)->destructor_arg); |
| } |
| |
| static void mhi_wwan_ctrl_refill_work(struct work_struct *work) |
| { |
| struct mhi_wwan_dev *mhiwwan = container_of(work, struct mhi_wwan_dev, rx_refill); |
| struct mhi_device *mhi_dev = mhiwwan->mhi_dev; |
| |
| while (mhi_wwan_rx_budget_dec(mhiwwan)) { |
| struct sk_buff *skb; |
| |
| skb = alloc_skb(mhiwwan->mtu, GFP_KERNEL); |
| if (!skb) { |
| mhi_wwan_rx_budget_inc(mhiwwan); |
| break; |
| } |
| |
| /* To prevent unlimited buffer allocation if nothing consumes |
| * the RX buffers (passed to WWAN core), track their lifespan |
| * to not allocate more than allowed budget. |
| */ |
| skb->destructor = __mhi_skb_destructor; |
| skb_shinfo(skb)->destructor_arg = mhiwwan; |
| |
| if (mhi_queue_skb(mhi_dev, DMA_FROM_DEVICE, skb, mhiwwan->mtu, MHI_EOT)) { |
| dev_err(&mhi_dev->dev, "Failed to queue buffer\n"); |
| kfree_skb(skb); |
| break; |
| } |
| } |
| } |
| |
| static int mhi_wwan_ctrl_start(struct wwan_port *port) |
| { |
| struct mhi_wwan_dev *mhiwwan = wwan_port_get_drvdata(port); |
| int ret; |
| |
| /* Start mhi device's channel(s) */ |
| ret = mhi_prepare_for_transfer(mhiwwan->mhi_dev); |
| if (ret) |
| return ret; |
| |
| /* Don't allocate more buffers than MHI channel queue size */ |
| mhiwwan->rx_budget = mhi_get_free_desc_count(mhiwwan->mhi_dev, DMA_FROM_DEVICE); |
| |
| /* Add buffers to the MHI inbound queue */ |
| if (test_bit(MHI_WWAN_DL_CAP, &mhiwwan->flags)) { |
| set_bit(MHI_WWAN_RX_REFILL, &mhiwwan->flags); |
| mhi_wwan_ctrl_refill_work(&mhiwwan->rx_refill); |
| } |
| |
| return 0; |
| } |
| |
| static void mhi_wwan_ctrl_stop(struct wwan_port *port) |
| { |
| struct mhi_wwan_dev *mhiwwan = wwan_port_get_drvdata(port); |
| |
| spin_lock_bh(&mhiwwan->rx_lock); |
| clear_bit(MHI_WWAN_RX_REFILL, &mhiwwan->flags); |
| spin_unlock_bh(&mhiwwan->rx_lock); |
| |
| cancel_work_sync(&mhiwwan->rx_refill); |
| |
| mhi_unprepare_from_transfer(mhiwwan->mhi_dev); |
| } |
| |
| static int mhi_wwan_ctrl_tx(struct wwan_port *port, struct sk_buff *skb) |
| { |
| struct mhi_wwan_dev *mhiwwan = wwan_port_get_drvdata(port); |
| int ret; |
| |
| if (skb->len > mhiwwan->mtu) |
| return -EMSGSIZE; |
| |
| if (!test_bit(MHI_WWAN_UL_CAP, &mhiwwan->flags)) |
| return -EOPNOTSUPP; |
| |
| /* Queue the packet for MHI transfer and check fullness of the queue */ |
| spin_lock_bh(&mhiwwan->tx_lock); |
| ret = mhi_queue_skb(mhiwwan->mhi_dev, DMA_TO_DEVICE, skb, skb->len, MHI_EOT); |
| if (mhi_queue_is_full(mhiwwan->mhi_dev, DMA_TO_DEVICE)) |
| wwan_port_txoff(port); |
| spin_unlock_bh(&mhiwwan->tx_lock); |
| |
| return ret; |
| } |
| |
| static const struct wwan_port_ops wwan_pops = { |
| .start = mhi_wwan_ctrl_start, |
| .stop = mhi_wwan_ctrl_stop, |
| .tx = mhi_wwan_ctrl_tx, |
| }; |
| |
| static void mhi_ul_xfer_cb(struct mhi_device *mhi_dev, |
| struct mhi_result *mhi_result) |
| { |
| struct mhi_wwan_dev *mhiwwan = dev_get_drvdata(&mhi_dev->dev); |
| struct wwan_port *port = mhiwwan->wwan_port; |
| struct sk_buff *skb = mhi_result->buf_addr; |
| |
| dev_dbg(&mhi_dev->dev, "%s: status: %d xfer_len: %zu\n", __func__, |
| mhi_result->transaction_status, mhi_result->bytes_xferd); |
| |
| /* MHI core has done with the buffer, release it */ |
| consume_skb(skb); |
| |
| /* There is likely new slot available in the MHI queue, re-allow TX */ |
| spin_lock_bh(&mhiwwan->tx_lock); |
| if (!mhi_queue_is_full(mhiwwan->mhi_dev, DMA_TO_DEVICE)) |
| wwan_port_txon(port); |
| spin_unlock_bh(&mhiwwan->tx_lock); |
| } |
| |
| static void mhi_dl_xfer_cb(struct mhi_device *mhi_dev, |
| struct mhi_result *mhi_result) |
| { |
| struct mhi_wwan_dev *mhiwwan = dev_get_drvdata(&mhi_dev->dev); |
| struct wwan_port *port = mhiwwan->wwan_port; |
| struct sk_buff *skb = mhi_result->buf_addr; |
| |
| dev_dbg(&mhi_dev->dev, "%s: status: %d receive_len: %zu\n", __func__, |
| mhi_result->transaction_status, mhi_result->bytes_xferd); |
| |
| if (mhi_result->transaction_status && |
| mhi_result->transaction_status != -EOVERFLOW) { |
| kfree_skb(skb); |
| return; |
| } |
| |
| /* MHI core does not update skb->len, do it before forward */ |
| skb_put(skb, mhi_result->bytes_xferd); |
| wwan_port_rx(port, skb); |
| |
| /* Do not increment rx budget nor refill RX buffers now, wait for the |
| * buffer to be consumed. Done from __mhi_skb_destructor(). |
| */ |
| } |
| |
| static int mhi_wwan_ctrl_probe(struct mhi_device *mhi_dev, |
| const struct mhi_device_id *id) |
| { |
| struct mhi_controller *cntrl = mhi_dev->mhi_cntrl; |
| struct mhi_wwan_dev *mhiwwan; |
| struct wwan_port *port; |
| |
| mhiwwan = kzalloc(sizeof(*mhiwwan), GFP_KERNEL); |
| if (!mhiwwan) |
| return -ENOMEM; |
| |
| mhiwwan->mhi_dev = mhi_dev; |
| mhiwwan->mtu = MHI_WWAN_MAX_MTU; |
| INIT_WORK(&mhiwwan->rx_refill, mhi_wwan_ctrl_refill_work); |
| spin_lock_init(&mhiwwan->tx_lock); |
| spin_lock_init(&mhiwwan->rx_lock); |
| |
| if (mhi_dev->dl_chan) |
| set_bit(MHI_WWAN_DL_CAP, &mhiwwan->flags); |
| if (mhi_dev->ul_chan) |
| set_bit(MHI_WWAN_UL_CAP, &mhiwwan->flags); |
| |
| dev_set_drvdata(&mhi_dev->dev, mhiwwan); |
| |
| /* Register as a wwan port, id->driver_data contains wwan port type */ |
| port = wwan_create_port(&cntrl->mhi_dev->dev, id->driver_data, |
| &wwan_pops, NULL, mhiwwan); |
| if (IS_ERR(port)) { |
| kfree(mhiwwan); |
| return PTR_ERR(port); |
| } |
| |
| mhiwwan->wwan_port = port; |
| |
| return 0; |
| }; |
| |
| static void mhi_wwan_ctrl_remove(struct mhi_device *mhi_dev) |
| { |
| struct mhi_wwan_dev *mhiwwan = dev_get_drvdata(&mhi_dev->dev); |
| |
| wwan_remove_port(mhiwwan->wwan_port); |
| kfree(mhiwwan); |
| } |
| |
| static const struct mhi_device_id mhi_wwan_ctrl_match_table[] = { |
| { .chan = "DUN", .driver_data = WWAN_PORT_AT }, |
| { .chan = "DUN2", .driver_data = WWAN_PORT_AT }, |
| { .chan = "MBIM", .driver_data = WWAN_PORT_MBIM }, |
| { .chan = "QMI", .driver_data = WWAN_PORT_QMI }, |
| { .chan = "DIAG", .driver_data = WWAN_PORT_QCDM }, |
| { .chan = "FIREHOSE", .driver_data = WWAN_PORT_FIREHOSE }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(mhi, mhi_wwan_ctrl_match_table); |
| |
| static struct mhi_driver mhi_wwan_ctrl_driver = { |
| .id_table = mhi_wwan_ctrl_match_table, |
| .remove = mhi_wwan_ctrl_remove, |
| .probe = mhi_wwan_ctrl_probe, |
| .ul_xfer_cb = mhi_ul_xfer_cb, |
| .dl_xfer_cb = mhi_dl_xfer_cb, |
| .driver = { |
| .name = "mhi_wwan_ctrl", |
| }, |
| }; |
| |
| module_mhi_driver(mhi_wwan_ctrl_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("MHI WWAN CTRL Driver"); |
| MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>"); |