| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2021 Nicolas Saenz Julienne <nsaenzjulienne@suse.de> |
| * For more information on Raspberry Pi's PoE hat see: |
| * https://www.raspberrypi.org/products/poe-hat/ |
| * |
| * Limitations: |
| * - No disable bit, so a disabled PWM is simulated by duty_cycle 0 |
| * - Only normal polarity |
| * - Fixed 12.5 kHz period |
| * |
| * The current period is completed when HW is reconfigured. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| |
| #include <soc/bcm2835/raspberrypi-firmware.h> |
| #include <dt-bindings/pwm/raspberrypi,firmware-poe-pwm.h> |
| |
| #define RPI_PWM_MAX_DUTY 255 |
| #define RPI_PWM_PERIOD_NS 80000 /* 12.5 kHz */ |
| |
| #define RPI_PWM_CUR_DUTY_REG 0x0 |
| |
| struct raspberrypi_pwm { |
| struct rpi_firmware *firmware; |
| struct pwm_chip chip; |
| unsigned int duty_cycle; |
| }; |
| |
| struct raspberrypi_pwm_prop { |
| __le32 reg; |
| __le32 val; |
| __le32 ret; |
| } __packed; |
| |
| static inline |
| struct raspberrypi_pwm *raspberrypi_pwm_from_chip(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct raspberrypi_pwm, chip); |
| } |
| |
| static int raspberrypi_pwm_set_property(struct rpi_firmware *firmware, |
| u32 reg, u32 val) |
| { |
| struct raspberrypi_pwm_prop msg = { |
| .reg = cpu_to_le32(reg), |
| .val = cpu_to_le32(val), |
| }; |
| int ret; |
| |
| ret = rpi_firmware_property(firmware, RPI_FIRMWARE_SET_POE_HAT_VAL, |
| &msg, sizeof(msg)); |
| if (ret) |
| return ret; |
| if (msg.ret) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int raspberrypi_pwm_get_property(struct rpi_firmware *firmware, |
| u32 reg, u32 *val) |
| { |
| struct raspberrypi_pwm_prop msg = { |
| .reg = reg |
| }; |
| int ret; |
| |
| ret = rpi_firmware_property(firmware, RPI_FIRMWARE_GET_POE_HAT_VAL, |
| &msg, sizeof(msg)); |
| if (ret) |
| return ret; |
| if (msg.ret) |
| return -EIO; |
| |
| *val = le32_to_cpu(msg.val); |
| |
| return 0; |
| } |
| |
| static void raspberrypi_pwm_get_state(struct pwm_chip *chip, |
| struct pwm_device *pwm, |
| struct pwm_state *state) |
| { |
| struct raspberrypi_pwm *rpipwm = raspberrypi_pwm_from_chip(chip); |
| |
| state->period = RPI_PWM_PERIOD_NS; |
| state->duty_cycle = DIV_ROUND_UP(rpipwm->duty_cycle * RPI_PWM_PERIOD_NS, |
| RPI_PWM_MAX_DUTY); |
| state->enabled = !!(rpipwm->duty_cycle); |
| state->polarity = PWM_POLARITY_NORMAL; |
| } |
| |
| static int raspberrypi_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| const struct pwm_state *state) |
| { |
| struct raspberrypi_pwm *rpipwm = raspberrypi_pwm_from_chip(chip); |
| unsigned int duty_cycle; |
| int ret; |
| |
| if (state->period < RPI_PWM_PERIOD_NS || |
| state->polarity != PWM_POLARITY_NORMAL) |
| return -EINVAL; |
| |
| if (!state->enabled) |
| duty_cycle = 0; |
| else if (state->duty_cycle < RPI_PWM_PERIOD_NS) |
| duty_cycle = DIV_ROUND_DOWN_ULL(state->duty_cycle * RPI_PWM_MAX_DUTY, |
| RPI_PWM_PERIOD_NS); |
| else |
| duty_cycle = RPI_PWM_MAX_DUTY; |
| |
| if (duty_cycle == rpipwm->duty_cycle) |
| return 0; |
| |
| ret = raspberrypi_pwm_set_property(rpipwm->firmware, RPI_PWM_CUR_DUTY_REG, |
| duty_cycle); |
| if (ret) { |
| dev_err(chip->dev, "Failed to set duty cycle: %pe\n", |
| ERR_PTR(ret)); |
| return ret; |
| } |
| |
| rpipwm->duty_cycle = duty_cycle; |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops raspberrypi_pwm_ops = { |
| .get_state = raspberrypi_pwm_get_state, |
| .apply = raspberrypi_pwm_apply, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int raspberrypi_pwm_probe(struct platform_device *pdev) |
| { |
| struct device_node *firmware_node; |
| struct device *dev = &pdev->dev; |
| struct rpi_firmware *firmware; |
| struct raspberrypi_pwm *rpipwm; |
| int ret; |
| |
| firmware_node = of_get_parent(dev->of_node); |
| if (!firmware_node) { |
| dev_err(dev, "Missing firmware node\n"); |
| return -ENOENT; |
| } |
| |
| firmware = devm_rpi_firmware_get(&pdev->dev, firmware_node); |
| of_node_put(firmware_node); |
| if (!firmware) |
| return dev_err_probe(dev, -EPROBE_DEFER, |
| "Failed to get firmware handle\n"); |
| |
| rpipwm = devm_kzalloc(&pdev->dev, sizeof(*rpipwm), GFP_KERNEL); |
| if (!rpipwm) |
| return -ENOMEM; |
| |
| rpipwm->firmware = firmware; |
| rpipwm->chip.dev = dev; |
| rpipwm->chip.ops = &raspberrypi_pwm_ops; |
| rpipwm->chip.base = -1; |
| rpipwm->chip.npwm = RASPBERRYPI_FIRMWARE_PWM_NUM; |
| |
| ret = raspberrypi_pwm_get_property(rpipwm->firmware, RPI_PWM_CUR_DUTY_REG, |
| &rpipwm->duty_cycle); |
| if (ret) { |
| dev_err(dev, "Failed to get duty cycle: %pe\n", ERR_PTR(ret)); |
| return ret; |
| } |
| |
| return devm_pwmchip_add(dev, &rpipwm->chip); |
| } |
| |
| static const struct of_device_id raspberrypi_pwm_of_match[] = { |
| { .compatible = "raspberrypi,firmware-poe-pwm", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, raspberrypi_pwm_of_match); |
| |
| static struct platform_driver raspberrypi_pwm_driver = { |
| .driver = { |
| .name = "raspberrypi-poe-pwm", |
| .of_match_table = raspberrypi_pwm_of_match, |
| }, |
| .probe = raspberrypi_pwm_probe, |
| }; |
| module_platform_driver(raspberrypi_pwm_driver); |
| |
| MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>"); |
| MODULE_DESCRIPTION("Raspberry Pi Firmware Based PWM Bus Driver"); |
| MODULE_LICENSE("GPL v2"); |