| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) |
| // |
| // This file is provided under a dual BSD/GPLv2 license. When using or |
| // redistributing this file, you may do so under either license. |
| // |
| // Copyright(c) 2018 Intel Corporation. All rights reserved. |
| // |
| // Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> |
| // |
| // PCM Layer, interface between ALSA and IPC. |
| // |
| |
| #include <linux/pm_runtime.h> |
| #include <sound/pcm_params.h> |
| #include <sound/sof.h> |
| #include "sof-priv.h" |
| #include "sof-audio.h" |
| #include "ops.h" |
| #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES) |
| #include "sof-probes.h" |
| #endif |
| |
| /* Create DMA buffer page table for DSP */ |
| static int create_page_table(struct snd_soc_component *component, |
| struct snd_pcm_substream *substream, |
| unsigned char *dma_area, size_t size) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_sof_pcm *spcm; |
| struct snd_dma_buffer *dmab = snd_pcm_get_dma_buf(substream); |
| int stream = substream->stream; |
| |
| spcm = snd_sof_find_spcm_dai(component, rtd); |
| if (!spcm) |
| return -EINVAL; |
| |
| return snd_sof_create_page_table(component->dev, dmab, |
| spcm->stream[stream].page_table.area, size); |
| } |
| |
| static int sof_pcm_dsp_params(struct snd_sof_pcm *spcm, struct snd_pcm_substream *substream, |
| const struct sof_ipc_pcm_params_reply *reply) |
| { |
| struct snd_soc_component *scomp = spcm->scomp; |
| struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp); |
| |
| /* validate offset */ |
| int ret = snd_sof_ipc_pcm_params(sdev, substream, reply); |
| |
| if (ret < 0) |
| dev_err(scomp->dev, "error: got wrong reply for PCM %d\n", |
| spcm->pcm.pcm_id); |
| |
| return ret; |
| } |
| |
| /* |
| * sof pcm period elapse work |
| */ |
| static void snd_sof_pcm_period_elapsed_work(struct work_struct *work) |
| { |
| struct snd_sof_pcm_stream *sps = |
| container_of(work, struct snd_sof_pcm_stream, |
| period_elapsed_work); |
| |
| snd_pcm_period_elapsed(sps->substream); |
| } |
| |
| void snd_sof_pcm_init_elapsed_work(struct work_struct *work) |
| { |
| INIT_WORK(work, snd_sof_pcm_period_elapsed_work); |
| } |
| |
| /* |
| * sof pcm period elapse, this could be called at irq thread context. |
| */ |
| void snd_sof_pcm_period_elapsed(struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_soc_component *component = |
| snd_soc_rtdcom_lookup(rtd, SOF_AUDIO_PCM_DRV_NAME); |
| struct snd_sof_pcm *spcm; |
| |
| spcm = snd_sof_find_spcm_dai(component, rtd); |
| if (!spcm) { |
| dev_err(component->dev, |
| "error: period elapsed for unknown stream!\n"); |
| return; |
| } |
| |
| /* |
| * snd_pcm_period_elapsed() can be called in interrupt context |
| * before IRQ_HANDLED is returned. Inside snd_pcm_period_elapsed(), |
| * when the PCM is done draining or xrun happened, a STOP IPC will |
| * then be sent and this IPC will hit IPC timeout. |
| * To avoid sending IPC before the previous IPC is handled, we |
| * schedule delayed work here to call the snd_pcm_period_elapsed(). |
| */ |
| schedule_work(&spcm->stream[substream->stream].period_elapsed_work); |
| } |
| EXPORT_SYMBOL(snd_sof_pcm_period_elapsed); |
| |
| static int sof_pcm_dsp_pcm_free(struct snd_pcm_substream *substream, |
| struct snd_sof_dev *sdev, |
| struct snd_sof_pcm *spcm) |
| { |
| struct sof_ipc_stream stream; |
| struct sof_ipc_reply reply; |
| int ret; |
| |
| stream.hdr.size = sizeof(stream); |
| stream.hdr.cmd = SOF_IPC_GLB_STREAM_MSG | SOF_IPC_STREAM_PCM_FREE; |
| stream.comp_id = spcm->stream[substream->stream].comp_id; |
| |
| /* send IPC to the DSP */ |
| ret = sof_ipc_tx_message(sdev->ipc, stream.hdr.cmd, &stream, |
| sizeof(stream), &reply, sizeof(reply)); |
| if (!ret) |
| spcm->prepared[substream->stream] = false; |
| |
| return ret; |
| } |
| |
| static int sof_pcm_setup_connected_widgets(struct snd_sof_dev *sdev, |
| struct snd_soc_pcm_runtime *rtd, |
| struct snd_sof_pcm *spcm, int dir) |
| { |
| struct snd_soc_dai *dai; |
| int ret, j; |
| |
| /* query DAPM for list of connected widgets and set them up */ |
| for_each_rtd_cpu_dais(rtd, j, dai) { |
| struct snd_soc_dapm_widget_list *list; |
| |
| ret = snd_soc_dapm_dai_get_connected_widgets(dai, dir, &list, |
| dpcm_end_walk_at_be); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: dai %s has no valid %s path\n", dai->name, |
| dir == SNDRV_PCM_STREAM_PLAYBACK ? "playback" : "capture"); |
| return ret; |
| } |
| |
| spcm->stream[dir].list = list; |
| |
| ret = sof_widget_list_setup(sdev, spcm, dir); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: failed widget list set up for pcm %d dir %d\n", |
| spcm->pcm.pcm_id, dir); |
| spcm->stream[dir].list = NULL; |
| snd_soc_dapm_dai_free_widgets(&list); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int sof_pcm_hw_params(struct snd_soc_component *component, |
| struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(component); |
| struct snd_sof_pcm *spcm; |
| struct sof_ipc_pcm_params pcm; |
| struct sof_ipc_pcm_params_reply ipc_params_reply; |
| int ret; |
| |
| /* nothing to do for BE */ |
| if (rtd->dai_link->no_pcm) |
| return 0; |
| |
| spcm = snd_sof_find_spcm_dai(component, rtd); |
| if (!spcm) |
| return -EINVAL; |
| |
| /* |
| * Handle repeated calls to hw_params() without free_pcm() in |
| * between. At least ALSA OSS emulation depends on this. |
| */ |
| if (spcm->prepared[substream->stream]) { |
| ret = sof_pcm_dsp_pcm_free(substream, sdev, spcm); |
| if (ret < 0) |
| return ret; |
| } |
| |
| dev_dbg(component->dev, "pcm: hw params stream %d dir %d\n", |
| spcm->pcm.pcm_id, substream->stream); |
| |
| memset(&pcm, 0, sizeof(pcm)); |
| |
| /* create compressed page table for audio firmware */ |
| if (runtime->buffer_changed) { |
| ret = create_page_table(component, substream, runtime->dma_area, |
| runtime->dma_bytes); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* number of pages should be rounded up */ |
| pcm.params.buffer.pages = PFN_UP(runtime->dma_bytes); |
| |
| /* set IPC PCM parameters */ |
| pcm.hdr.size = sizeof(pcm); |
| pcm.hdr.cmd = SOF_IPC_GLB_STREAM_MSG | SOF_IPC_STREAM_PCM_PARAMS; |
| pcm.comp_id = spcm->stream[substream->stream].comp_id; |
| pcm.params.hdr.size = sizeof(pcm.params); |
| pcm.params.buffer.phy_addr = |
| spcm->stream[substream->stream].page_table.addr; |
| pcm.params.buffer.size = runtime->dma_bytes; |
| pcm.params.direction = substream->stream; |
| pcm.params.sample_valid_bytes = params_width(params) >> 3; |
| pcm.params.buffer_fmt = SOF_IPC_BUFFER_INTERLEAVED; |
| pcm.params.rate = params_rate(params); |
| pcm.params.channels = params_channels(params); |
| pcm.params.host_period_bytes = params_period_bytes(params); |
| |
| /* container size */ |
| ret = snd_pcm_format_physical_width(params_format(params)); |
| if (ret < 0) |
| return ret; |
| pcm.params.sample_container_bytes = ret >> 3; |
| |
| /* format */ |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S16: |
| pcm.params.frame_fmt = SOF_IPC_FRAME_S16_LE; |
| break; |
| case SNDRV_PCM_FORMAT_S24: |
| pcm.params.frame_fmt = SOF_IPC_FRAME_S24_4LE; |
| break; |
| case SNDRV_PCM_FORMAT_S32: |
| pcm.params.frame_fmt = SOF_IPC_FRAME_S32_LE; |
| break; |
| case SNDRV_PCM_FORMAT_FLOAT: |
| pcm.params.frame_fmt = SOF_IPC_FRAME_FLOAT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* firmware already configured host stream */ |
| ret = snd_sof_pcm_platform_hw_params(sdev, |
| substream, |
| params, |
| &pcm.params); |
| if (ret < 0) { |
| dev_err(component->dev, "error: platform hw params failed\n"); |
| return ret; |
| } |
| |
| dev_dbg(component->dev, "stream_tag %d", pcm.params.stream_tag); |
| |
| /* if this is a repeated hw_params without hw_free, skip setting up widgets */ |
| if (!spcm->stream[substream->stream].list) { |
| ret = sof_pcm_setup_connected_widgets(sdev, rtd, spcm, substream->stream); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* send hw_params IPC to the DSP */ |
| ret = sof_ipc_tx_message(sdev->ipc, pcm.hdr.cmd, &pcm, sizeof(pcm), |
| &ipc_params_reply, sizeof(ipc_params_reply)); |
| if (ret < 0) { |
| dev_err(component->dev, "error: hw params ipc failed for stream %d\n", |
| pcm.params.stream_tag); |
| return ret; |
| } |
| |
| ret = sof_pcm_dsp_params(spcm, substream, &ipc_params_reply); |
| if (ret < 0) |
| return ret; |
| |
| spcm->prepared[substream->stream] = true; |
| |
| /* save pcm hw_params */ |
| memcpy(&spcm->params[substream->stream], params, sizeof(*params)); |
| |
| return ret; |
| } |
| |
| static int sof_pcm_hw_free(struct snd_soc_component *component, |
| struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(component); |
| struct snd_sof_pcm *spcm; |
| int ret, err = 0; |
| |
| /* nothing to do for BE */ |
| if (rtd->dai_link->no_pcm) |
| return 0; |
| |
| spcm = snd_sof_find_spcm_dai(component, rtd); |
| if (!spcm) |
| return -EINVAL; |
| |
| dev_dbg(component->dev, "pcm: free stream %d dir %d\n", |
| spcm->pcm.pcm_id, substream->stream); |
| |
| if (spcm->prepared[substream->stream]) { |
| ret = sof_pcm_dsp_pcm_free(substream, sdev, spcm); |
| if (ret < 0) |
| err = ret; |
| } |
| |
| ret = sof_widget_list_free(sdev, spcm, substream->stream); |
| if (ret < 0) |
| err = ret; |
| |
| cancel_work_sync(&spcm->stream[substream->stream].period_elapsed_work); |
| |
| ret = snd_sof_pcm_platform_hw_free(sdev, substream); |
| if (ret < 0) { |
| dev_err(component->dev, "error: platform hw free failed\n"); |
| err = ret; |
| } |
| |
| return err; |
| } |
| |
| static int sof_pcm_prepare(struct snd_soc_component *component, |
| struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_sof_pcm *spcm; |
| int ret; |
| |
| /* nothing to do for BE */ |
| if (rtd->dai_link->no_pcm) |
| return 0; |
| |
| spcm = snd_sof_find_spcm_dai(component, rtd); |
| if (!spcm) |
| return -EINVAL; |
| |
| if (spcm->prepared[substream->stream]) |
| return 0; |
| |
| dev_dbg(component->dev, "pcm: prepare stream %d dir %d\n", |
| spcm->pcm.pcm_id, substream->stream); |
| |
| /* set hw_params */ |
| ret = sof_pcm_hw_params(component, |
| substream, &spcm->params[substream->stream]); |
| if (ret < 0) { |
| dev_err(component->dev, |
| "error: set pcm hw_params after resume\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * FE dai link trigger actions are always executed in non-atomic context because |
| * they involve IPC's. |
| */ |
| static int sof_pcm_trigger(struct snd_soc_component *component, |
| struct snd_pcm_substream *substream, int cmd) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(component); |
| struct snd_sof_pcm *spcm; |
| struct sof_ipc_stream stream; |
| struct sof_ipc_reply reply; |
| bool reset_hw_params = false; |
| bool free_widget_list = false; |
| bool ipc_first = false; |
| int ret; |
| |
| /* nothing to do for BE */ |
| if (rtd->dai_link->no_pcm) |
| return 0; |
| |
| spcm = snd_sof_find_spcm_dai(component, rtd); |
| if (!spcm) |
| return -EINVAL; |
| |
| dev_dbg(component->dev, "pcm: trigger stream %d dir %d cmd %d\n", |
| spcm->pcm.pcm_id, substream->stream, cmd); |
| |
| stream.hdr.size = sizeof(stream); |
| stream.hdr.cmd = SOF_IPC_GLB_STREAM_MSG; |
| stream.comp_id = spcm->stream[substream->stream].comp_id; |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| stream.hdr.cmd |= SOF_IPC_STREAM_TRIG_PAUSE; |
| ipc_first = true; |
| break; |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| stream.hdr.cmd |= SOF_IPC_STREAM_TRIG_RELEASE; |
| break; |
| case SNDRV_PCM_TRIGGER_RESUME: |
| if (spcm->stream[substream->stream].suspend_ignored) { |
| /* |
| * this case will be triggered when INFO_RESUME is |
| * supported, no need to resume streams that remained |
| * enabled in D0ix. |
| */ |
| spcm->stream[substream->stream].suspend_ignored = false; |
| return 0; |
| } |
| |
| /* set up hw_params */ |
| ret = sof_pcm_prepare(component, substream); |
| if (ret < 0) { |
| dev_err(component->dev, |
| "error: failed to set up hw_params upon resume\n"); |
| return ret; |
| } |
| |
| fallthrough; |
| case SNDRV_PCM_TRIGGER_START: |
| if (spcm->stream[substream->stream].suspend_ignored) { |
| /* |
| * This case will be triggered when INFO_RESUME is |
| * not supported, no need to re-start streams that |
| * remained enabled in D0ix. |
| */ |
| spcm->stream[substream->stream].suspend_ignored = false; |
| return 0; |
| } |
| stream.hdr.cmd |= SOF_IPC_STREAM_TRIG_START; |
| break; |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| if (sdev->system_suspend_target == SOF_SUSPEND_S0IX && |
| spcm->stream[substream->stream].d0i3_compatible) { |
| /* |
| * trap the event, not sending trigger stop to |
| * prevent the FW pipelines from being stopped, |
| * and mark the flag to ignore the upcoming DAPM |
| * PM events. |
| */ |
| spcm->stream[substream->stream].suspend_ignored = true; |
| return 0; |
| } |
| free_widget_list = true; |
| fallthrough; |
| case SNDRV_PCM_TRIGGER_STOP: |
| stream.hdr.cmd |= SOF_IPC_STREAM_TRIG_STOP; |
| ipc_first = true; |
| reset_hw_params = true; |
| break; |
| default: |
| dev_err(component->dev, "error: unhandled trigger cmd %d\n", |
| cmd); |
| return -EINVAL; |
| } |
| |
| /* |
| * DMA and IPC sequence is different for start and stop. Need to send |
| * STOP IPC before stop DMA |
| */ |
| if (!ipc_first) |
| snd_sof_pcm_platform_trigger(sdev, substream, cmd); |
| |
| /* send IPC to the DSP */ |
| ret = sof_ipc_tx_message(sdev->ipc, stream.hdr.cmd, &stream, |
| sizeof(stream), &reply, sizeof(reply)); |
| |
| /* need to STOP DMA even if STOP IPC failed */ |
| if (ipc_first) |
| snd_sof_pcm_platform_trigger(sdev, substream, cmd); |
| |
| /* free PCM if reset_hw_params is set and the STOP IPC is successful */ |
| if (!ret && reset_hw_params) { |
| ret = sof_pcm_dsp_pcm_free(substream, sdev, spcm); |
| if (ret < 0) |
| return ret; |
| |
| /* free widget list only for SUSPEND trigger */ |
| if (free_widget_list) |
| ret = sof_widget_list_free(sdev, spcm, substream->stream); |
| } |
| |
| return ret; |
| } |
| |
| static snd_pcm_uframes_t sof_pcm_pointer(struct snd_soc_component *component, |
| struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(component); |
| struct snd_sof_pcm *spcm; |
| snd_pcm_uframes_t host, dai; |
| |
| /* nothing to do for BE */ |
| if (rtd->dai_link->no_pcm) |
| return 0; |
| |
| /* use dsp ops pointer callback directly if set */ |
| if (sof_ops(sdev)->pcm_pointer) |
| return sof_ops(sdev)->pcm_pointer(sdev, substream); |
| |
| spcm = snd_sof_find_spcm_dai(component, rtd); |
| if (!spcm) |
| return -EINVAL; |
| |
| /* read position from DSP */ |
| host = bytes_to_frames(substream->runtime, |
| spcm->stream[substream->stream].posn.host_posn); |
| dai = bytes_to_frames(substream->runtime, |
| spcm->stream[substream->stream].posn.dai_posn); |
| |
| dev_vdbg(component->dev, |
| "PCM: stream %d dir %d DMA position %lu DAI position %lu\n", |
| spcm->pcm.pcm_id, substream->stream, host, dai); |
| |
| return host; |
| } |
| |
| static int sof_pcm_open(struct snd_soc_component *component, |
| struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(component); |
| const struct snd_sof_dsp_ops *ops = sof_ops(sdev); |
| struct snd_sof_pcm *spcm; |
| struct snd_soc_tplg_stream_caps *caps; |
| int ret; |
| |
| /* nothing to do for BE */ |
| if (rtd->dai_link->no_pcm) |
| return 0; |
| |
| spcm = snd_sof_find_spcm_dai(component, rtd); |
| if (!spcm) |
| return -EINVAL; |
| |
| dev_dbg(component->dev, "pcm: open stream %d dir %d\n", |
| spcm->pcm.pcm_id, substream->stream); |
| |
| |
| caps = &spcm->pcm.caps[substream->stream]; |
| |
| /* set runtime config */ |
| runtime->hw.info = ops->hw_info; /* platform-specific */ |
| |
| /* set any runtime constraints based on topology */ |
| runtime->hw.formats = le64_to_cpu(caps->formats); |
| runtime->hw.period_bytes_min = le32_to_cpu(caps->period_size_min); |
| runtime->hw.period_bytes_max = le32_to_cpu(caps->period_size_max); |
| runtime->hw.periods_min = le32_to_cpu(caps->periods_min); |
| runtime->hw.periods_max = le32_to_cpu(caps->periods_max); |
| |
| /* |
| * caps->buffer_size_min is not used since the |
| * snd_pcm_hardware structure only defines buffer_bytes_max |
| */ |
| runtime->hw.buffer_bytes_max = le32_to_cpu(caps->buffer_size_max); |
| |
| dev_dbg(component->dev, "period min %zd max %zd bytes\n", |
| runtime->hw.period_bytes_min, |
| runtime->hw.period_bytes_max); |
| dev_dbg(component->dev, "period count %d max %d\n", |
| runtime->hw.periods_min, |
| runtime->hw.periods_max); |
| dev_dbg(component->dev, "buffer max %zd bytes\n", |
| runtime->hw.buffer_bytes_max); |
| |
| /* set wait time - TODO: come from topology */ |
| substream->wait_time = 500; |
| |
| spcm->stream[substream->stream].posn.host_posn = 0; |
| spcm->stream[substream->stream].posn.dai_posn = 0; |
| spcm->stream[substream->stream].substream = substream; |
| spcm->prepared[substream->stream] = false; |
| |
| ret = snd_sof_pcm_platform_open(sdev, substream); |
| if (ret < 0) |
| dev_err(component->dev, "error: pcm open failed %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int sof_pcm_close(struct snd_soc_component *component, |
| struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(component); |
| struct snd_sof_pcm *spcm; |
| int err; |
| |
| /* nothing to do for BE */ |
| if (rtd->dai_link->no_pcm) |
| return 0; |
| |
| spcm = snd_sof_find_spcm_dai(component, rtd); |
| if (!spcm) |
| return -EINVAL; |
| |
| dev_dbg(component->dev, "pcm: close stream %d dir %d\n", |
| spcm->pcm.pcm_id, substream->stream); |
| |
| err = snd_sof_pcm_platform_close(sdev, substream); |
| if (err < 0) { |
| dev_err(component->dev, "error: pcm close failed %d\n", |
| err); |
| /* |
| * keep going, no point in preventing the close |
| * from happening |
| */ |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Pre-allocate playback/capture audio buffer pages. |
| * no need to explicitly release memory preallocated by sof_pcm_new in pcm_free |
| * snd_pcm_lib_preallocate_free_for_all() is called by the core. |
| */ |
| static int sof_pcm_new(struct snd_soc_component *component, |
| struct snd_soc_pcm_runtime *rtd) |
| { |
| struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(component); |
| struct snd_sof_pcm *spcm; |
| struct snd_pcm *pcm = rtd->pcm; |
| struct snd_soc_tplg_stream_caps *caps; |
| int stream = SNDRV_PCM_STREAM_PLAYBACK; |
| |
| /* find SOF PCM for this RTD */ |
| spcm = snd_sof_find_spcm_dai(component, rtd); |
| if (!spcm) { |
| dev_warn(component->dev, "warn: can't find PCM with DAI ID %d\n", |
| rtd->dai_link->id); |
| return 0; |
| } |
| |
| dev_dbg(component->dev, "creating new PCM %s\n", spcm->pcm.pcm_name); |
| |
| /* do we need to pre-allocate playback audio buffer pages */ |
| if (!spcm->pcm.playback) |
| goto capture; |
| |
| caps = &spcm->pcm.caps[stream]; |
| |
| /* pre-allocate playback audio buffer pages */ |
| dev_dbg(component->dev, |
| "spcm: allocate %s playback DMA buffer size 0x%x max 0x%x\n", |
| caps->name, caps->buffer_size_min, caps->buffer_size_max); |
| |
| if (!pcm->streams[stream].substream) { |
| dev_err(component->dev, "error: NULL playback substream!\n"); |
| return -EINVAL; |
| } |
| |
| snd_pcm_set_managed_buffer(pcm->streams[stream].substream, |
| SNDRV_DMA_TYPE_DEV_SG, sdev->dev, |
| 0, le32_to_cpu(caps->buffer_size_max)); |
| capture: |
| stream = SNDRV_PCM_STREAM_CAPTURE; |
| |
| /* do we need to pre-allocate capture audio buffer pages */ |
| if (!spcm->pcm.capture) |
| return 0; |
| |
| caps = &spcm->pcm.caps[stream]; |
| |
| /* pre-allocate capture audio buffer pages */ |
| dev_dbg(component->dev, |
| "spcm: allocate %s capture DMA buffer size 0x%x max 0x%x\n", |
| caps->name, caps->buffer_size_min, caps->buffer_size_max); |
| |
| if (!pcm->streams[stream].substream) { |
| dev_err(component->dev, "error: NULL capture substream!\n"); |
| return -EINVAL; |
| } |
| |
| snd_pcm_set_managed_buffer(pcm->streams[stream].substream, |
| SNDRV_DMA_TYPE_DEV_SG, sdev->dev, |
| 0, le32_to_cpu(caps->buffer_size_max)); |
| |
| return 0; |
| } |
| |
| static void ssp_dai_config_pcm_params_match(struct snd_sof_dev *sdev, const char *link_name, |
| struct snd_pcm_hw_params *params) |
| { |
| struct sof_ipc_dai_config *config; |
| struct snd_sof_dai *dai; |
| int i; |
| |
| /* |
| * Search for all matching DAIs as we can have both playback and capture DAI |
| * associated with the same link. |
| */ |
| list_for_each_entry(dai, &sdev->dai_list, list) { |
| if (!dai->name || strcmp(link_name, dai->name)) |
| continue; |
| for (i = 0; i < dai->number_configs; i++) { |
| config = &dai->dai_config[i]; |
| if (config->ssp.fsync_rate == params_rate(params)) { |
| dev_dbg(sdev->dev, "DAI config %d matches pcm hw params\n", i); |
| dai->current_config = i; |
| break; |
| } |
| } |
| } |
| } |
| |
| /* fixup the BE DAI link to match any values from topology */ |
| int sof_pcm_dai_link_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_pcm_hw_params *params) |
| { |
| struct snd_interval *rate = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_RATE); |
| struct snd_interval *channels = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_CHANNELS); |
| struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); |
| struct snd_soc_component *component = |
| snd_soc_rtdcom_lookup(rtd, SOF_AUDIO_PCM_DRV_NAME); |
| struct snd_sof_dai *dai = |
| snd_sof_find_dai(component, (char *)rtd->dai_link->name); |
| struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(component); |
| struct snd_soc_dpcm *dpcm; |
| |
| /* no topology exists for this BE, try a common configuration */ |
| if (!dai) { |
| dev_warn(component->dev, |
| "warning: no topology found for BE DAI %s config\n", |
| rtd->dai_link->name); |
| |
| /* set 48k, stereo, 16bits by default */ |
| rate->min = 48000; |
| rate->max = 48000; |
| |
| channels->min = 2; |
| channels->max = 2; |
| |
| snd_mask_none(fmt); |
| snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE); |
| |
| return 0; |
| } |
| |
| /* read format from topology */ |
| snd_mask_none(fmt); |
| |
| switch (dai->comp_dai.config.frame_fmt) { |
| case SOF_IPC_FRAME_S16_LE: |
| snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE); |
| break; |
| case SOF_IPC_FRAME_S24_4LE: |
| snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); |
| break; |
| case SOF_IPC_FRAME_S32_LE: |
| snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S32_LE); |
| break; |
| default: |
| dev_err(component->dev, "error: No available DAI format!\n"); |
| return -EINVAL; |
| } |
| |
| /* read rate and channels from topology */ |
| switch (dai->dai_config->type) { |
| case SOF_DAI_INTEL_SSP: |
| /* search for config to pcm params match, if not found use default */ |
| ssp_dai_config_pcm_params_match(sdev, (char *)rtd->dai_link->name, params); |
| |
| rate->min = dai->dai_config[dai->current_config].ssp.fsync_rate; |
| rate->max = dai->dai_config[dai->current_config].ssp.fsync_rate; |
| channels->min = dai->dai_config[dai->current_config].ssp.tdm_slots; |
| channels->max = dai->dai_config[dai->current_config].ssp.tdm_slots; |
| |
| dev_dbg(component->dev, |
| "rate_min: %d rate_max: %d\n", rate->min, rate->max); |
| dev_dbg(component->dev, |
| "channels_min: %d channels_max: %d\n", |
| channels->min, channels->max); |
| |
| break; |
| case SOF_DAI_INTEL_DMIC: |
| /* DMIC only supports 16 or 32 bit formats */ |
| if (dai->comp_dai.config.frame_fmt == SOF_IPC_FRAME_S24_4LE) { |
| dev_err(component->dev, |
| "error: invalid fmt %d for DAI type %d\n", |
| dai->comp_dai.config.frame_fmt, |
| dai->dai_config->type); |
| } |
| break; |
| case SOF_DAI_INTEL_HDA: |
| /* |
| * HDAudio does not follow the default trigger |
| * sequence due to firmware implementation |
| */ |
| for_each_dpcm_fe(rtd, SNDRV_PCM_STREAM_PLAYBACK, dpcm) { |
| struct snd_soc_pcm_runtime *fe = dpcm->fe; |
| |
| fe->dai_link->trigger[SNDRV_PCM_STREAM_PLAYBACK] = |
| SND_SOC_DPCM_TRIGGER_POST; |
| } |
| break; |
| case SOF_DAI_INTEL_ALH: |
| /* |
| * Dai could run with different channel count compared with |
| * front end, so get dai channel count from topology |
| */ |
| channels->min = dai->dai_config->alh.channels; |
| channels->max = dai->dai_config->alh.channels; |
| break; |
| case SOF_DAI_IMX_ESAI: |
| rate->min = dai->dai_config->esai.fsync_rate; |
| rate->max = dai->dai_config->esai.fsync_rate; |
| channels->min = dai->dai_config->esai.tdm_slots; |
| channels->max = dai->dai_config->esai.tdm_slots; |
| |
| dev_dbg(component->dev, |
| "rate_min: %d rate_max: %d\n", rate->min, rate->max); |
| dev_dbg(component->dev, |
| "channels_min: %d channels_max: %d\n", |
| channels->min, channels->max); |
| break; |
| case SOF_DAI_IMX_SAI: |
| rate->min = dai->dai_config->sai.fsync_rate; |
| rate->max = dai->dai_config->sai.fsync_rate; |
| channels->min = dai->dai_config->sai.tdm_slots; |
| channels->max = dai->dai_config->sai.tdm_slots; |
| |
| dev_dbg(component->dev, |
| "rate_min: %d rate_max: %d\n", rate->min, rate->max); |
| dev_dbg(component->dev, |
| "channels_min: %d channels_max: %d\n", |
| channels->min, channels->max); |
| break; |
| default: |
| dev_err(component->dev, "error: invalid DAI type %d\n", |
| dai->dai_config->type); |
| break; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(sof_pcm_dai_link_fixup); |
| |
| static int sof_pcm_probe(struct snd_soc_component *component) |
| { |
| struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(component); |
| struct snd_sof_pdata *plat_data = sdev->pdata; |
| const char *tplg_filename; |
| int ret; |
| |
| /* load the default topology */ |
| sdev->component = component; |
| |
| tplg_filename = devm_kasprintf(sdev->dev, GFP_KERNEL, |
| "%s/%s", |
| plat_data->tplg_filename_prefix, |
| plat_data->tplg_filename); |
| if (!tplg_filename) |
| return -ENOMEM; |
| |
| ret = snd_sof_load_topology(component, tplg_filename); |
| if (ret < 0) { |
| dev_err(component->dev, "error: failed to load DSP topology %d\n", |
| ret); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static void sof_pcm_remove(struct snd_soc_component *component) |
| { |
| /* remove topology */ |
| snd_soc_tplg_component_remove(component); |
| } |
| |
| void snd_sof_new_platform_drv(struct snd_sof_dev *sdev) |
| { |
| struct snd_soc_component_driver *pd = &sdev->plat_drv; |
| struct snd_sof_pdata *plat_data = sdev->pdata; |
| const char *drv_name; |
| |
| drv_name = plat_data->machine->drv_name; |
| |
| pd->name = "sof-audio-component"; |
| pd->probe = sof_pcm_probe; |
| pd->remove = sof_pcm_remove; |
| pd->open = sof_pcm_open; |
| pd->close = sof_pcm_close; |
| pd->hw_params = sof_pcm_hw_params; |
| pd->prepare = sof_pcm_prepare; |
| pd->hw_free = sof_pcm_hw_free; |
| pd->trigger = sof_pcm_trigger; |
| pd->pointer = sof_pcm_pointer; |
| |
| #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES) |
| pd->compress_ops = &sof_probe_compressed_ops; |
| #endif |
| pd->pcm_construct = sof_pcm_new; |
| pd->ignore_machine = drv_name; |
| pd->be_hw_params_fixup = sof_pcm_dai_link_fixup; |
| pd->be_pcm_base = SOF_BE_PCM_BASE; |
| pd->use_dai_pcm_id = true; |
| pd->topology_name_prefix = "sof"; |
| |
| /* increment module refcount when a pcm is opened */ |
| pd->module_get_upon_open = 1; |
| } |