| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/drivers/video/console/sticore.c - |
| * core code for console driver using HP's STI firmware |
| * |
| * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> |
| * Copyright (C) 2001-2023 Helge Deller <deller@gmx.de> |
| * Copyright (C) 2001-2002 Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
| * |
| * TODO: |
| * - call STI in virtual mode rather than in real mode |
| * - screen blanking with state_mgmt() in text mode STI ? |
| * - try to make it work on m68k hp workstations ;) |
| * |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, KBUILD_MODNAME |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/font.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/page.h> |
| #include <asm/parisc-device.h> |
| #include <asm/pdc.h> |
| #include <asm/cacheflush.h> |
| #include <asm/grfioctl.h> |
| |
| #include <video/sticore.h> |
| |
| #define STI_DRIVERVERSION "Version 0.9c" |
| |
| static struct sti_struct *default_sti __read_mostly; |
| |
| /* number of STI ROMS found and their ptrs to each struct */ |
| static int num_sti_roms __read_mostly; |
| static struct sti_struct *sti_roms[MAX_STI_ROMS] __read_mostly; |
| |
| static void *store_sti_val(struct sti_struct *sti, void *ptr, unsigned long val) |
| { |
| u32 *ptr32 = ptr; |
| |
| if (IS_ENABLED(CONFIG_64BIT) && sti->do_call64) { |
| /* used for 64-bit STI ROM */ |
| unsigned long *ptr64 = ptr; |
| |
| ptr64 = PTR_ALIGN(ptr64, sizeof(void *)); |
| *ptr64++ = val; |
| return ptr64; |
| } |
| |
| /* used for 32-bit STI ROM */ |
| *ptr32++ = val; |
| return ptr32; |
| } |
| |
| #define store_sti_ptr(sti, dest, ptr) \ |
| store_sti_val(sti, dest, STI_PTR(ptr)) |
| |
| /* The colour indices used by STI are |
| * 0 - Black |
| * 1 - White |
| * 2 - Red |
| * 3 - Yellow/Brown |
| * 4 - Green |
| * 5 - Cyan |
| * 6 - Blue |
| * 7 - Magenta |
| * |
| * So we have the same colours as VGA (basically one bit each for R, G, B), |
| * but have to translate them, anyway. */ |
| |
| static const u8 col_trans[8] = { |
| 0, 6, 4, 5, |
| 2, 7, 3, 1 |
| }; |
| |
| #define c_fg(sti, c) col_trans[((c>> 8) & 7)] |
| #define c_bg(sti, c) col_trans[((c>>11) & 7)] |
| #define c_index(sti, c) ((c) & 0xff) |
| |
| static const struct sti_init_flags default_init_flags = { |
| .wait = STI_WAIT, |
| .reset = 1, |
| .text = 1, |
| .nontext = 1, |
| .no_chg_bet = 1, |
| .no_chg_bei = 1, |
| .init_cmap_tx = 1, |
| }; |
| |
| static int sti_init_graph(struct sti_struct *sti) |
| { |
| struct sti_init_inptr *inptr = &sti->sti_data->init_inptr; |
| struct sti_init_inptr_ext *inptr_ext = &sti->sti_data->init_inptr_ext; |
| struct sti_init_outptr *outptr = &sti->sti_data->init_outptr; |
| unsigned long flags; |
| int ret, err; |
| |
| spin_lock_irqsave(&sti->lock, flags); |
| |
| memset(inptr, 0, sizeof(*inptr)); |
| inptr->text_planes = 3; /* # of text planes (max 3 for STI) */ |
| memset(inptr_ext, 0, sizeof(*inptr_ext)); |
| store_sti_ptr(sti, &inptr->ext_ptr, inptr_ext); |
| outptr->errno = 0; |
| |
| ret = sti_call(sti, sti->init_graph, &default_init_flags, inptr, |
| outptr, sti->glob_cfg); |
| |
| if (ret >= 0) |
| sti->text_planes = outptr->text_planes; |
| err = outptr->errno; |
| |
| spin_unlock_irqrestore(&sti->lock, flags); |
| |
| if (ret < 0) { |
| pr_err("STI init_graph failed (ret %d, errno %d)\n", ret, err); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static const struct sti_conf_flags default_conf_flags = { |
| .wait = STI_WAIT, |
| }; |
| |
| static void sti_inq_conf(struct sti_struct *sti) |
| { |
| struct sti_conf_inptr *inptr = &sti->sti_data->inq_inptr; |
| struct sti_conf_outptr *outptr = &sti->sti_data->inq_outptr; |
| unsigned long flags; |
| s32 ret; |
| |
| store_sti_ptr(sti, &outptr->ext_ptr, &sti->sti_data->inq_outptr_ext); |
| |
| do { |
| spin_lock_irqsave(&sti->lock, flags); |
| memset(inptr, 0, sizeof(*inptr)); |
| ret = sti_call(sti, sti->inq_conf, &default_conf_flags, |
| inptr, outptr, sti->glob_cfg); |
| spin_unlock_irqrestore(&sti->lock, flags); |
| } while (ret == 1); |
| } |
| |
| static const struct sti_font_flags default_font_flags = { |
| .wait = STI_WAIT, |
| .non_text = 0, |
| }; |
| |
| void |
| sti_putc(struct sti_struct *sti, int c, int y, int x, |
| struct sti_cooked_font *font) |
| { |
| struct sti_font_inptr *inptr; |
| struct sti_font_inptr inptr_default = { |
| .font_start_addr = (void *)STI_PTR(font->raw), |
| .index = c_index(sti, c), |
| .fg_color = c_fg(sti, c), |
| .bg_color = c_bg(sti, c), |
| .dest_x = x * font->width, |
| .dest_y = y * font->height, |
| }; |
| struct sti_font_outptr *outptr = &sti->sti_data->font_outptr; |
| s32 ret; |
| unsigned long flags; |
| |
| do { |
| spin_lock_irqsave(&sti->lock, flags); |
| inptr = &inptr_default; |
| if (IS_ENABLED(CONFIG_64BIT) && !sti->do_call64) { |
| /* copy below 4G if calling 32-bit on LP64 kernel */ |
| inptr = &sti->sti_data->font_inptr; |
| *inptr = inptr_default; |
| /* skip first 4 bytes for 32-bit STI call */ |
| inptr = (void *)(((unsigned long)inptr) + sizeof(u32)); |
| } |
| ret = sti_call(sti, sti->font_unpmv, &default_font_flags, |
| inptr, outptr, sti->glob_cfg); |
| spin_unlock_irqrestore(&sti->lock, flags); |
| } while (ret == 1); |
| } |
| |
| static const struct sti_blkmv_flags clear_blkmv_flags = { |
| .wait = STI_WAIT, |
| .color = 1, |
| .clear = 1, |
| }; |
| |
| void |
| sti_set(struct sti_struct *sti, int src_y, int src_x, |
| int height, int width, u8 color) |
| { |
| struct sti_blkmv_inptr *inptr; |
| struct sti_blkmv_inptr inptr_default = { |
| .fg_color = color, |
| .bg_color = color, |
| .src_x = src_x, |
| .src_y = src_y, |
| .dest_x = src_x, |
| .dest_y = src_y, |
| .width = width, |
| .height = height, |
| }; |
| struct sti_blkmv_outptr *outptr = &sti->sti_data->blkmv_outptr; |
| s32 ret; |
| unsigned long flags; |
| |
| do { |
| spin_lock_irqsave(&sti->lock, flags); |
| inptr = &inptr_default; |
| if (IS_ENABLED(CONFIG_64BIT) && !sti->do_call64) { |
| /* copy below 4G if calling 32-bit on LP64 kernel */ |
| inptr = &sti->sti_data->blkmv_inptr; |
| *inptr = inptr_default; |
| } |
| ret = sti_call(sti, sti->block_move, &clear_blkmv_flags, |
| inptr, outptr, sti->glob_cfg); |
| spin_unlock_irqrestore(&sti->lock, flags); |
| } while (ret == 1); |
| } |
| |
| void |
| sti_clear(struct sti_struct *sti, int src_y, int src_x, |
| int height, int width, int c, struct sti_cooked_font *font) |
| { |
| struct sti_blkmv_inptr *inptr; |
| struct sti_blkmv_inptr inptr_default = { |
| .fg_color = c_fg(sti, c), |
| .bg_color = c_bg(sti, c), |
| .src_x = src_x * font->width, |
| .src_y = src_y * font->height, |
| .dest_x = src_x * font->width, |
| .dest_y = src_y * font->height, |
| .width = width * font->width, |
| .height = height * font->height, |
| }; |
| struct sti_blkmv_outptr *outptr = &sti->sti_data->blkmv_outptr; |
| s32 ret; |
| unsigned long flags; |
| |
| do { |
| spin_lock_irqsave(&sti->lock, flags); |
| inptr = &inptr_default; |
| if (IS_ENABLED(CONFIG_64BIT) && !sti->do_call64) { |
| /* copy below 4G if calling 32-bit on LP64 kernel */ |
| inptr = &sti->sti_data->blkmv_inptr; |
| *inptr = inptr_default; |
| } |
| ret = sti_call(sti, sti->block_move, &clear_blkmv_flags, |
| inptr, outptr, sti->glob_cfg); |
| spin_unlock_irqrestore(&sti->lock, flags); |
| } while (ret == 1); |
| } |
| |
| static const struct sti_blkmv_flags default_blkmv_flags = { |
| .wait = STI_WAIT, |
| }; |
| |
| void |
| sti_bmove(struct sti_struct *sti, int src_y, int src_x, |
| int dst_y, int dst_x, int height, int width, |
| struct sti_cooked_font *font) |
| { |
| struct sti_blkmv_inptr *inptr; |
| struct sti_blkmv_inptr inptr_default = { |
| .src_x = src_x * font->width, |
| .src_y = src_y * font->height, |
| .dest_x = dst_x * font->width, |
| .dest_y = dst_y * font->height, |
| .width = width * font->width, |
| .height = height * font->height, |
| }; |
| struct sti_blkmv_outptr *outptr = &sti->sti_data->blkmv_outptr; |
| s32 ret; |
| unsigned long flags; |
| |
| do { |
| spin_lock_irqsave(&sti->lock, flags); |
| inptr = &inptr_default; |
| if (IS_ENABLED(CONFIG_64BIT) && !sti->do_call64) { |
| /* copy below 4G if calling 32-bit on LP64 kernel */ |
| inptr = &sti->sti_data->blkmv_inptr; |
| *inptr = inptr_default; |
| } |
| ret = sti_call(sti, sti->block_move, &default_blkmv_flags, |
| inptr, outptr, sti->glob_cfg); |
| spin_unlock_irqrestore(&sti->lock, flags); |
| } while (ret == 1); |
| } |
| |
| |
| static void sti_flush(unsigned long start, unsigned long end) |
| { |
| flush_icache_range(start, end); |
| } |
| |
| static void sti_rom_copy(unsigned long base, unsigned long count, void *dest) |
| { |
| unsigned long dest_start = (unsigned long) dest; |
| |
| /* this still needs to be revisited (see arch/parisc/mm/init.c:246) ! */ |
| while (count >= 4) { |
| count -= 4; |
| *(u32 *)dest = gsc_readl(base); |
| base += 4; |
| dest += 4; |
| } |
| while (count) { |
| count--; |
| *(u8 *)dest = gsc_readb(base); |
| base++; |
| dest++; |
| } |
| |
| sti_flush(dest_start, (unsigned long)dest); |
| } |
| |
| |
| |
| |
| static char default_sti_path[21] __read_mostly; |
| |
| #ifndef MODULE |
| static int __init sti_setup(char *str) |
| { |
| if (str) |
| strscpy(default_sti_path, str, sizeof(default_sti_path)); |
| |
| return 1; |
| } |
| |
| /* Assuming the machine has multiple STI consoles (=graphic cards) which |
| * all get detected by sticon, the user may define with the linux kernel |
| * parameter sti=<x> which of them will be the initial boot-console. |
| * <x> is a number between 0 and MAX_STI_ROMS, with 0 as the default |
| * STI screen. |
| */ |
| __setup("sti=", sti_setup); |
| #endif |
| |
| |
| |
| static char *font_name; |
| static int font_index, |
| font_height, |
| font_width; |
| #ifndef MODULE |
| static int sti_font_setup(char *str) |
| { |
| /* |
| * The default font can be selected in various ways. |
| * a) sti_font=VGA8x16, sti_font=10x20, sti_font=10*20 selects |
| * an built-in Linux framebuffer font. |
| * b) sti_font=<index>, where index is (1..x) with 1 selecting |
| * the first HP STI ROM built-in font.. |
| */ |
| |
| if (*str >= '0' && *str <= '9') { |
| char *x; |
| |
| if ((x = strchr(str, 'x')) || (x = strchr(str, '*'))) { |
| font_height = simple_strtoul(str, NULL, 0); |
| font_width = simple_strtoul(x+1, NULL, 0); |
| } else { |
| font_index = simple_strtoul(str, NULL, 0); |
| } |
| } else { |
| font_name = str; /* fb font name */ |
| } |
| |
| return 1; |
| } |
| |
| /* The optional linux kernel parameter "sti_font" defines which font |
| * should be used by the sticon driver to draw characters to the screen. |
| * Possible values are: |
| * - sti_font=<fb_fontname>: |
| * <fb_fontname> is the name of one of the linux-kernel built-in |
| * framebuffer font names (e.g. VGA8x16, SUN22x18). |
| * This is only available if the fonts have been statically compiled |
| * in with e.g. the CONFIG_FONT_8x16 or CONFIG_FONT_SUN12x22 options. |
| * - sti_font=<number> (<number> = 1,2,3,...) |
| * most STI ROMs have built-in HP specific fonts, which can be selected |
| * by giving the desired number to the sticon driver. |
| * NOTE: This number is machine and STI ROM dependend. |
| * - sti_font=<height>x<width> (e.g. sti_font=16x8) |
| * <height> and <width> gives hints to the height and width of the |
| * font which the user wants. The sticon driver will try to use |
| * a font with this height and width, but if no suitable font is |
| * found, sticon will use the default 8x8 font. |
| */ |
| __setup("sti_font=", sti_font_setup); |
| #endif |
| |
| |
| |
| static void sti_dump_globcfg(struct sti_struct *sti) |
| { |
| struct sti_glob_cfg *glob_cfg = sti->glob_cfg; |
| struct sti_glob_cfg_ext *cfg = &sti->sti_data->glob_cfg_ext; |
| |
| pr_debug("%d text planes\n" |
| "%4d x %4d screen resolution\n" |
| "%4d x %4d offscreen\n" |
| "%4d x %4d layout\n", |
| glob_cfg->text_planes, |
| glob_cfg->onscreen_x, glob_cfg->onscreen_y, |
| glob_cfg->offscreen_x, glob_cfg->offscreen_y, |
| glob_cfg->total_x, glob_cfg->total_y); |
| |
| /* dump extended cfg */ |
| pr_debug("monitor %d\n" |
| "in friendly mode: %d\n" |
| "power consumption %d watts\n" |
| "freq ref %d\n" |
| "sti_mem_addr %px (size=%d bytes)\n", |
| cfg->curr_mon, |
| cfg->friendly_boot, |
| cfg->power, |
| cfg->freq_ref, |
| cfg->sti_mem_addr, sti->sti_mem_request); |
| } |
| |
| static void sti_dump_outptr(struct sti_struct *sti) |
| { |
| pr_debug("%d bits per pixel\n" |
| "%d used bits\n" |
| "%d planes\n" |
| "attributes %08x\n", |
| sti->sti_data->inq_outptr.bits_per_pixel, |
| sti->sti_data->inq_outptr.bits_used, |
| sti->sti_data->inq_outptr.planes, |
| sti->sti_data->inq_outptr.attributes); |
| } |
| |
| static int sti_init_glob_cfg(struct sti_struct *sti, unsigned long rom_address, |
| unsigned long hpa) |
| { |
| struct sti_glob_cfg *glob_cfg; |
| struct sti_glob_cfg_ext *glob_cfg_ext; |
| void *save_addr, *ptr; |
| void *sti_mem_addr; |
| int i, size; |
| |
| if (sti->sti_mem_request < 256) |
| sti->sti_mem_request = 256; /* STI default */ |
| |
| size = sizeof(struct sti_all_data) + sti->sti_mem_request - 256; |
| |
| sti->sti_data = kzalloc(size, STI_LOWMEM); |
| if (!sti->sti_data) |
| return -ENOMEM; |
| |
| glob_cfg = &sti->sti_data->glob_cfg; |
| glob_cfg_ext = &sti->sti_data->glob_cfg_ext; |
| save_addr = &sti->sti_data->save_addr; |
| sti_mem_addr = &sti->sti_data->sti_mem_addr; |
| |
| for (i = 0; i < STI_REGION_MAX; i++) { |
| unsigned long newhpa, len; |
| |
| if (sti->pd) { |
| unsigned char offs = sti->rm_entry[i]; |
| |
| if (offs == 0) |
| continue; |
| if (offs != PCI_ROM_ADDRESS && |
| (offs < PCI_BASE_ADDRESS_0 || |
| offs > PCI_BASE_ADDRESS_5)) { |
| pr_warn("STI pci region mapping for region %d (%02x) can't be mapped\n", |
| i,sti->rm_entry[i]); |
| continue; |
| } |
| newhpa = pci_resource_start (sti->pd, (offs - PCI_BASE_ADDRESS_0) / 4); |
| } else |
| newhpa = (i == 0) ? rom_address : hpa; |
| |
| sti->regions_phys[i] = |
| REGION_OFFSET_TO_PHYS(sti->regions[i], newhpa); |
| |
| len = sti->regions[i].region_desc.length * 4096; |
| |
| pr_debug("region #%d: phys %08lx, len=%lukB, " |
| "btlb=%d, sysonly=%d, cache=%d, last=%d\n", |
| i, sti->regions_phys[i], len / 1024, |
| sti->regions[i].region_desc.btlb, |
| sti->regions[i].region_desc.sys_only, |
| sti->regions[i].region_desc.cache, |
| sti->regions[i].region_desc.last); |
| |
| /* last entry reached ? */ |
| if (sti->regions[i].region_desc.last) |
| break; |
| } |
| |
| ptr = &glob_cfg->region_ptrs; |
| for (i = 0; i < STI_REGION_MAX; i++) |
| ptr = store_sti_val(sti, ptr, sti->regions_phys[i]); |
| |
| *(s32 *)ptr = 0; /* set reent_lvl */ |
| ptr += sizeof(s32); |
| ptr = store_sti_ptr(sti, ptr, save_addr); |
| ptr = store_sti_ptr(sti, ptr, glob_cfg_ext); |
| |
| store_sti_ptr(sti, &glob_cfg_ext->sti_mem_addr, sti_mem_addr); |
| |
| sti->glob_cfg = glob_cfg; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_FONT_SUPPORT |
| static struct sti_cooked_font * |
| sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name) |
| { |
| const struct font_desc *fbfont = NULL; |
| unsigned int size, bpc; |
| void *dest; |
| struct sti_rom_font *nf; |
| struct sti_cooked_font *cooked_font; |
| |
| if (fbfont_name && strlen(fbfont_name)) |
| fbfont = find_font(fbfont_name); |
| if (!fbfont) |
| fbfont = get_default_font(1024, 768, NULL, NULL); |
| if (!fbfont) |
| return NULL; |
| |
| pr_info(" using %ux%u framebuffer font %s\n", |
| fbfont->width, fbfont->height, fbfont->name); |
| |
| bpc = ((fbfont->width+7)/8) * fbfont->height; |
| size = bpc * fbfont->charcount; |
| size += sizeof(struct sti_rom_font); |
| |
| nf = kzalloc(size, STI_LOWMEM); |
| if (!nf) |
| return NULL; |
| |
| nf->first_char = 0; |
| nf->last_char = fbfont->charcount - 1; |
| nf->width = fbfont->width; |
| nf->height = fbfont->height; |
| nf->font_type = STI_FONT_HPROMAN8; |
| nf->bytes_per_char = bpc; |
| nf->next_font = 0; |
| nf->underline_height = 1; |
| nf->underline_pos = fbfont->height - nf->underline_height; |
| |
| dest = nf; |
| dest += sizeof(struct sti_rom_font); |
| memcpy(dest, fbfont->data, bpc * fbfont->charcount); |
| |
| cooked_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL); |
| if (!cooked_font) { |
| kfree(nf); |
| return NULL; |
| } |
| |
| cooked_font->raw = nf; |
| cooked_font->raw_ptr = nf; |
| cooked_font->next_font = NULL; |
| |
| cooked_rom->font_start = cooked_font; |
| |
| return cooked_font; |
| } |
| #else |
| static struct sti_cooked_font * |
| sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name) |
| { |
| return NULL; |
| } |
| #endif |
| |
| static void sti_dump_font(struct sti_cooked_font *font) |
| { |
| #ifdef STI_DUMP_FONT |
| unsigned char *p = (unsigned char *)font->raw; |
| int n; |
| |
| p += sizeof(struct sti_rom_font); |
| pr_debug(" w %d h %d bpc %d\n", font->width, font->height, |
| font->raw->bytes_per_char); |
| |
| for (n = 0; n < 256 * font->raw->bytes_per_char; n += 16, p += 16) { |
| pr_debug(" 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x," |
| " 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x," |
| " 0x%02x, 0x%02x, 0x%02x, 0x%02x,\n", |
| p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7], p[8], |
| p[9], p[10], p[11], p[12], p[13], p[14], p[15]); |
| } |
| #endif |
| } |
| |
| static int sti_search_font(struct sti_cooked_rom *rom, int height, int width) |
| { |
| struct sti_cooked_font *font; |
| int i = 0; |
| |
| for (font = rom->font_start; font; font = font->next_font, i++) { |
| if ((font->raw->width == width) && |
| (font->raw->height == height)) |
| return i; |
| } |
| return 0; |
| } |
| |
| static struct sti_cooked_font *sti_select_font(struct sti_cooked_rom *rom) |
| { |
| struct sti_cooked_font *font; |
| int i; |
| |
| /* check for framebuffer-font first */ |
| if (!font_index) { |
| font = sti_select_fbfont(rom, font_name); |
| if (font) |
| return font; |
| } |
| |
| if (font_width && font_height) |
| font_index = sti_search_font(rom, |
| font_height, font_width); |
| |
| for (font = rom->font_start, i = font_index - 1; |
| font && (i > 0); |
| font = font->next_font, i--); |
| |
| if (font) |
| return font; |
| else |
| return rom->font_start; |
| } |
| |
| |
| static void sti_dump_rom(struct sti_struct *sti) |
| { |
| struct sti_rom *rom = sti->rom->raw; |
| struct sti_cooked_font *font_start; |
| int nr; |
| |
| pr_info(" id %04x-%04x, conforms to spec rev. %d.%02x\n", |
| rom->graphics_id[0], |
| rom->graphics_id[1], |
| rom->revno[0] >> 4, |
| rom->revno[0] & 0x0f); |
| pr_debug(" supports %d monitors\n", rom->num_mons); |
| pr_debug(" font start %08x\n", rom->font_start); |
| pr_debug(" region list %08x\n", rom->region_list); |
| pr_debug(" init_graph %08x\n", rom->init_graph); |
| pr_debug(" bus support %02x\n", rom->bus_support); |
| pr_debug(" ext bus support %02x\n", rom->ext_bus_support); |
| pr_debug(" alternate code type %d\n", rom->alt_code_type); |
| |
| font_start = sti->rom->font_start; |
| nr = 0; |
| while (font_start) { |
| struct sti_rom_font *f = font_start->raw; |
| |
| pr_info(" built-in font #%d: size %dx%d, chars %d-%d, bpc %d\n", ++nr, |
| f->width, f->height, |
| f->first_char, f->last_char, f->bytes_per_char); |
| font_start = font_start->next_font; |
| } |
| } |
| |
| |
| static int sti_cook_fonts(struct sti_cooked_rom *cooked_rom, |
| struct sti_rom *raw_rom) |
| { |
| struct sti_rom_font *raw_font, *font_start; |
| struct sti_cooked_font *cooked_font; |
| |
| cooked_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL); |
| if (!cooked_font) |
| return 0; |
| |
| cooked_rom->font_start = cooked_font; |
| |
| raw_font = ((void *)raw_rom) + (raw_rom->font_start); |
| |
| font_start = raw_font; |
| cooked_font->raw = raw_font; |
| |
| while (raw_font->next_font) { |
| raw_font = ((void *)font_start) + (raw_font->next_font); |
| |
| cooked_font->next_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL); |
| if (!cooked_font->next_font) |
| return 1; |
| |
| cooked_font = cooked_font->next_font; |
| |
| cooked_font->raw = raw_font; |
| } |
| |
| cooked_font->next_font = NULL; |
| return 1; |
| } |
| |
| #define BMODE_RELOCATE(offset) offset = (offset) / 4; |
| #define BMODE_LAST_ADDR_OFFS 0x50 |
| |
| void sti_font_convert_bytemode(struct sti_struct *sti, struct sti_cooked_font *f) |
| { |
| unsigned char *n, *p, *q; |
| int size = f->raw->bytes_per_char * (f->raw->last_char + 1) + sizeof(struct sti_rom_font); |
| struct sti_rom_font *old_font; |
| |
| if (sti->wordmode) |
| return; |
| |
| old_font = f->raw_ptr; |
| n = kcalloc(4, size, STI_LOWMEM); |
| f->raw_ptr = n; |
| if (!n) |
| return; |
| p = n + 3; |
| q = (unsigned char *) f->raw; |
| while (size--) { |
| *p = *q++; |
| p += 4; |
| } |
| /* store new ptr to byte-mode font and delete old font */ |
| f->raw = (struct sti_rom_font *) (n + 3); |
| kfree(old_font); |
| } |
| EXPORT_SYMBOL(sti_font_convert_bytemode); |
| |
| static void sti_bmode_rom_copy(unsigned long base, unsigned long count, |
| void *dest) |
| { |
| unsigned long dest_start = (unsigned long) dest; |
| |
| while (count) { |
| count--; |
| *(u8 *)dest = gsc_readl(base); |
| base += 4; |
| dest++; |
| } |
| |
| sti_flush(dest_start, (unsigned long)dest); |
| } |
| |
| static struct sti_rom *sti_get_bmode_rom (unsigned long address) |
| { |
| struct sti_rom *raw; |
| u32 size; |
| struct sti_rom_font *raw_font, *font_start; |
| |
| sti_bmode_rom_copy(address + BMODE_LAST_ADDR_OFFS, sizeof(size), &size); |
| |
| size = (size+3) / 4; |
| raw = kmalloc(size, STI_LOWMEM); |
| if (raw) { |
| sti_bmode_rom_copy(address, size, raw); |
| memmove (&raw->res004, &raw->type[0], 0x3c); |
| raw->type[3] = raw->res004; |
| |
| BMODE_RELOCATE (raw->region_list); |
| BMODE_RELOCATE (raw->font_start); |
| |
| BMODE_RELOCATE (raw->init_graph); |
| BMODE_RELOCATE (raw->state_mgmt); |
| BMODE_RELOCATE (raw->font_unpmv); |
| BMODE_RELOCATE (raw->block_move); |
| BMODE_RELOCATE (raw->inq_conf); |
| |
| raw_font = ((void *)raw) + raw->font_start; |
| font_start = raw_font; |
| |
| while (raw_font->next_font) { |
| BMODE_RELOCATE (raw_font->next_font); |
| raw_font = ((void *)font_start) + raw_font->next_font; |
| } |
| } |
| return raw; |
| } |
| |
| static struct sti_rom *sti_get_wmode_rom(unsigned long address) |
| { |
| struct sti_rom *raw; |
| unsigned long size; |
| |
| /* read the ROM size directly from the struct in ROM */ |
| size = gsc_readl(address + offsetof(struct sti_rom,last_addr)); |
| |
| raw = kmalloc(size, STI_LOWMEM); |
| if (raw) |
| sti_rom_copy(address, size, raw); |
| |
| return raw; |
| } |
| |
| static int sti_read_rom(int wordmode, struct sti_struct *sti, |
| unsigned long address) |
| { |
| struct sti_cooked_rom *cooked; |
| struct sti_rom *raw = NULL; |
| unsigned long revno; |
| |
| cooked = kmalloc(sizeof *cooked, GFP_KERNEL); |
| if (!cooked) |
| goto out_err; |
| |
| if (wordmode) |
| raw = sti_get_wmode_rom (address); |
| else |
| raw = sti_get_bmode_rom (address); |
| |
| if (!raw) |
| goto out_err; |
| |
| if (!sti_cook_fonts(cooked, raw)) { |
| pr_warn("No font found for STI at %08lx\n", address); |
| goto out_err; |
| } |
| |
| if (raw->region_list) |
| memcpy(sti->regions, ((void *)raw)+raw->region_list, sizeof(sti->regions)); |
| |
| address = (unsigned long) STI_PTR(raw); |
| |
| pr_info("STI %s ROM supports 32 %sbit firmware functions.\n", |
| wordmode ? "word mode" : "byte mode", |
| raw->alt_code_type == ALT_CODE_TYPE_PA_RISC_64 |
| ? "and 64 " : ""); |
| |
| if (IS_ENABLED(CONFIG_64BIT) && |
| raw->alt_code_type == ALT_CODE_TYPE_PA_RISC_64) { |
| sti->do_call64 = 1; |
| sti->font_unpmv = address + (raw->font_unp_addr & 0x03ffffff); |
| sti->block_move = address + (raw->block_move_addr & 0x03ffffff); |
| sti->init_graph = address + (raw->init_graph_addr & 0x03ffffff); |
| sti->inq_conf = address + (raw->inq_conf_addr & 0x03ffffff); |
| } else { |
| sti->font_unpmv = address + (raw->font_unpmv & 0x03ffffff); |
| sti->block_move = address + (raw->block_move & 0x03ffffff); |
| sti->init_graph = address + (raw->init_graph & 0x03ffffff); |
| sti->inq_conf = address + (raw->inq_conf & 0x03ffffff); |
| } |
| |
| sti->rom = cooked; |
| sti->rom->raw = raw; |
| sti_dump_rom(sti); |
| |
| sti->wordmode = wordmode; |
| sti->font = sti_select_font(sti->rom); |
| sti->font->width = sti->font->raw->width; |
| sti->font->height = sti->font->raw->height; |
| sti_font_convert_bytemode(sti, sti->font); |
| sti_dump_font(sti->font); |
| |
| pr_info(" using %d-bit STI ROM functions\n", |
| (IS_ENABLED(CONFIG_64BIT) && sti->do_call64) ? 64 : 32); |
| |
| sti->sti_mem_request = raw->sti_mem_req; |
| pr_debug(" mem_request = %d, reentsize %d\n", |
| sti->sti_mem_request, raw->reentsize); |
| |
| sti->graphics_id[0] = raw->graphics_id[0]; |
| sti->graphics_id[1] = raw->graphics_id[1]; |
| |
| /* check if the ROM routines in this card are compatible */ |
| if (wordmode || sti->graphics_id[1] != 0x09A02587) |
| goto ok; |
| |
| revno = (raw->revno[0] << 8) | raw->revno[1]; |
| |
| switch (sti->graphics_id[0]) { |
| case S9000_ID_HCRX: |
| /* HyperA or HyperB ? */ |
| if (revno == 0x8408 || revno == 0x840b) |
| goto msg_not_supported; |
| break; |
| case CRT_ID_THUNDER: |
| if (revno == 0x8509) |
| goto msg_not_supported; |
| break; |
| case CRT_ID_THUNDER2: |
| if (revno == 0x850c) |
| goto msg_not_supported; |
| } |
| ok: |
| return 1; |
| |
| msg_not_supported: |
| pr_warn("Sorry, this GSC/STI card is not yet supported.\n"); |
| pr_warn("Please see https://parisc.wiki.kernel.org/" |
| "index.php/Graphics_howto for more info.\n"); |
| /* fall through */ |
| out_err: |
| kfree(raw); |
| kfree(cooked); |
| return 0; |
| } |
| |
| static struct sti_struct *sti_try_rom_generic(unsigned long address, |
| unsigned long hpa, |
| struct pci_dev *pd) |
| { |
| struct sti_struct *sti; |
| int ok; |
| u32 sig; |
| |
| if (num_sti_roms >= MAX_STI_ROMS) { |
| pr_warn("maximum number of STI ROMS reached !\n"); |
| return NULL; |
| } |
| |
| sti = kzalloc(sizeof(*sti), GFP_KERNEL); |
| if (!sti) |
| return NULL; |
| |
| spin_lock_init(&sti->lock); |
| |
| test_rom: |
| /* pdc_add_valid() works only on 32-bit kernels */ |
| if ((!IS_ENABLED(CONFIG_64BIT) || |
| (boot_cpu_data.pdc.capabilities & PDC_MODEL_OS32)) && |
| pdc_add_valid(address)) { |
| goto out_err; |
| } |
| |
| sig = gsc_readl(address); |
| |
| /* check for a PCI ROM structure */ |
| if ((le32_to_cpu(sig)==0xaa55)) { |
| unsigned int i, rm_offset; |
| u32 *rm; |
| i = gsc_readl(address+0x04); |
| if (i != 1) { |
| /* The ROM could have multiple architecture |
| * dependent images (e.g. i386, parisc,...) */ |
| pr_warn("PCI ROM is not a STI ROM type image (0x%8x)\n", i); |
| goto out_err; |
| } |
| |
| sti->pd = pd; |
| |
| i = gsc_readl(address+0x0c); |
| pr_debug("PCI ROM size (from header) = %d kB\n", |
| le16_to_cpu(i>>16)*512/1024); |
| rm_offset = le16_to_cpu(i & 0xffff); |
| if (rm_offset) { |
| /* read 16 bytes from the pci region mapper array */ |
| rm = (u32*) &sti->rm_entry; |
| *rm++ = gsc_readl(address+rm_offset+0x00); |
| *rm++ = gsc_readl(address+rm_offset+0x04); |
| *rm++ = gsc_readl(address+rm_offset+0x08); |
| *rm++ = gsc_readl(address+rm_offset+0x0c); |
| } |
| |
| address += le32_to_cpu(gsc_readl(address+8)); |
| pr_debug("sig %04x, PCI STI ROM at %08lx\n", sig, address); |
| goto test_rom; |
| } |
| |
| ok = 0; |
| |
| if ((sig & 0xff) == 0x01) { |
| pr_debug(" byte mode ROM at %08lx, hpa at %08lx\n", |
| address, hpa); |
| ok = sti_read_rom(0, sti, address); |
| } |
| |
| if ((sig & 0xffff) == 0x0303) { |
| pr_debug(" word mode ROM at %08lx, hpa at %08lx\n", |
| address, hpa); |
| ok = sti_read_rom(1, sti, address); |
| } |
| |
| if (!ok) |
| goto out_err; |
| |
| if (sti_init_glob_cfg(sti, address, hpa)) |
| goto out_err; /* not enough memory */ |
| |
| /* disable STI PCI ROM. ROM and card RAM overlap and |
| * leaving it enabled would force HPMCs |
| */ |
| if (sti->pd) { |
| unsigned long rom_base; |
| rom_base = pci_resource_start(sti->pd, PCI_ROM_RESOURCE); |
| pci_write_config_dword(sti->pd, PCI_ROM_ADDRESS, rom_base & ~PCI_ROM_ADDRESS_ENABLE); |
| pr_debug("STI PCI ROM disabled\n"); |
| } |
| |
| if (sti_init_graph(sti)) |
| goto out_err; |
| |
| sti_inq_conf(sti); |
| sti_dump_globcfg(sti); |
| sti_dump_outptr(sti); |
| |
| pr_info(" graphics card name: %s\n", |
| sti->sti_data->inq_outptr.dev_name); |
| |
| sti_roms[num_sti_roms] = sti; |
| num_sti_roms++; |
| |
| return sti; |
| |
| out_err: |
| kfree(sti); |
| return NULL; |
| } |
| |
| static void sticore_check_for_default_sti(struct sti_struct *sti, char *path) |
| { |
| pr_info(" located at [%s]\n", sti->pa_path); |
| if (strcmp (path, default_sti_path) == 0) |
| default_sti = sti; |
| } |
| |
| /* |
| * on newer systems PDC gives the address of the ROM |
| * in the additional address field addr[1] while on |
| * older Systems the PDC stores it in page0->proc_sti |
| */ |
| static int __init sticore_pa_init(struct parisc_device *dev) |
| { |
| struct sti_struct *sti = NULL; |
| int hpa = dev->hpa.start; |
| |
| if (dev->num_addrs && dev->addr[0]) |
| sti = sti_try_rom_generic(dev->addr[0], hpa, NULL); |
| if (!sti) |
| sti = sti_try_rom_generic(hpa, hpa, NULL); |
| if (!sti) |
| sti = sti_try_rom_generic(PAGE0->proc_sti, hpa, NULL); |
| if (!sti) |
| return 1; |
| |
| print_pa_hwpath(dev, sti->pa_path); |
| sticore_check_for_default_sti(sti, sti->pa_path); |
| |
| sti->dev = &dev->dev; |
| |
| return 0; |
| } |
| |
| |
| static int sticore_pci_init(struct pci_dev *pd, const struct pci_device_id *ent) |
| { |
| #ifdef CONFIG_PCI |
| unsigned long fb_base, rom_base; |
| unsigned int fb_len, rom_len; |
| int err; |
| struct sti_struct *sti; |
| |
| err = pci_enable_device(pd); |
| if (err < 0) { |
| dev_err(&pd->dev, "Cannot enable PCI device\n"); |
| return err; |
| } |
| |
| fb_base = pci_resource_start(pd, 0); |
| fb_len = pci_resource_len(pd, 0); |
| rom_base = pci_resource_start(pd, PCI_ROM_RESOURCE); |
| rom_len = pci_resource_len(pd, PCI_ROM_RESOURCE); |
| if (rom_base) { |
| pci_write_config_dword(pd, PCI_ROM_ADDRESS, rom_base | PCI_ROM_ADDRESS_ENABLE); |
| pr_debug("STI PCI ROM enabled at 0x%08lx\n", rom_base); |
| } |
| |
| pr_info("STI PCI graphic ROM found at %08lx (%u kB), fb at %08lx (%u MB)\n", |
| rom_base, rom_len/1024, fb_base, fb_len/1024/1024); |
| |
| pr_debug("Trying PCI STI ROM at %08lx, PCI hpa at %08lx\n", |
| rom_base, fb_base); |
| |
| sti = sti_try_rom_generic(rom_base, fb_base, pd); |
| if (sti) { |
| print_pci_hwpath(pd, sti->pa_path); |
| sticore_check_for_default_sti(sti, sti->pa_path); |
| } |
| |
| if (!sti) { |
| pr_warn("Unable to handle STI device '%s'\n", pci_name(pd)); |
| return -ENODEV; |
| } |
| |
| sti->dev = &pd->dev; |
| #endif /* CONFIG_PCI */ |
| |
| return 0; |
| } |
| |
| |
| static void __exit sticore_pci_remove(struct pci_dev *pd) |
| { |
| BUG(); |
| } |
| |
| |
| static struct pci_device_id sti_pci_tbl[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_EG) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_FX6) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_FX4) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_FX2) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_FXE) }, |
| { 0, } /* terminate list */ |
| }; |
| MODULE_DEVICE_TABLE(pci, sti_pci_tbl); |
| |
| static struct pci_driver pci_sti_driver = { |
| .name = "sti", |
| .id_table = sti_pci_tbl, |
| .probe = sticore_pci_init, |
| .remove = __exit_p(sticore_pci_remove), |
| }; |
| |
| static struct parisc_device_id sti_pa_tbl[] = { |
| { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00077 }, |
| { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00085 }, |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(parisc, sti_pa_tbl); |
| |
| static struct parisc_driver pa_sti_driver __refdata = { |
| .name = "sti", |
| .id_table = sti_pa_tbl, |
| .probe = sticore_pa_init, |
| }; |
| |
| |
| /* |
| * sti_init_roms() - detects all STI ROMs and stores them in sti_roms[] |
| */ |
| |
| static int sticore_initialized __read_mostly; |
| |
| static void sti_init_roms(void) |
| { |
| if (sticore_initialized) |
| return; |
| |
| sticore_initialized = 1; |
| |
| pr_info("STI GSC/PCI core graphics driver " |
| STI_DRIVERVERSION "\n"); |
| |
| /* Register drivers for native & PCI cards */ |
| register_parisc_driver(&pa_sti_driver); |
| WARN_ON(pci_register_driver(&pci_sti_driver)); |
| |
| /* if we didn't find the given default sti, take the first one */ |
| if (!default_sti) |
| default_sti = sti_roms[0]; |
| |
| } |
| |
| /* |
| * index = 0 gives default sti |
| * index > 0 gives other stis in detection order |
| */ |
| struct sti_struct * sti_get_rom(unsigned int index) |
| { |
| if (!sticore_initialized) |
| sti_init_roms(); |
| |
| if (index == 0) |
| return default_sti; |
| |
| if (index > num_sti_roms) |
| return NULL; |
| |
| return sti_roms[index-1]; |
| } |
| EXPORT_SYMBOL(sti_get_rom); |
| |
| |
| int sti_call(const struct sti_struct *sti, unsigned long func, |
| const void *flags, void *inptr, void *outptr, |
| struct sti_glob_cfg *glob_cfg) |
| { |
| unsigned long _flags = STI_PTR(flags); |
| unsigned long _inptr = STI_PTR(inptr); |
| unsigned long _outptr = STI_PTR(outptr); |
| unsigned long _glob_cfg = STI_PTR(glob_cfg); |
| int ret; |
| |
| /* Check for overflow when using 32bit STI on 64bit kernel. */ |
| if (WARN_ONCE(IS_ENABLED(CONFIG_64BIT) && !sti->do_call64 && |
| (upper_32_bits(_flags) || upper_32_bits(_inptr) || |
| upper_32_bits(_outptr) || upper_32_bits(_glob_cfg)), |
| "Out of 32bit-range pointers!")) |
| return -1; |
| |
| ret = pdc_sti_call(func, _flags, _inptr, _outptr, _glob_cfg, |
| sti->do_call64); |
| |
| return ret; |
| } |
| |
| MODULE_AUTHOR("Philipp Rumpf, Helge Deller, Thomas Bogendoerfer"); |
| MODULE_DESCRIPTION("Core STI driver for HP's NGLE series graphics cards in HP PARISC machines"); |
| MODULE_LICENSE("GPL v2"); |
| |