| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/ioport.h> |
| #include <linux/timer.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/gpio.h> |
| |
| #include <bcm63xx_regs.h> |
| #include <bcm63xx_io.h> |
| #include "bcm63xx_pcmcia.h" |
| |
| #define PFX "bcm63xx_pcmcia: " |
| |
| #ifdef CONFIG_CARDBUS |
| /* if cardbus is used, platform device needs reference to actual pci |
| * device */ |
| static struct pci_dev *bcm63xx_cb_dev; |
| #endif |
| |
| /* |
| * read/write helper for pcmcia regs |
| */ |
| static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off) |
| { |
| return bcm_readl(skt->base + off); |
| } |
| |
| static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt, |
| u32 val, u32 off) |
| { |
| bcm_writel(val, skt->base + off); |
| } |
| |
| /* |
| * This callback should (re-)initialise the socket, turn on status |
| * interrupts and PCMCIA bus, and wait for power to stabilise so that |
| * the card status signals report correctly. |
| * |
| * Hardware cannot do that. |
| */ |
| static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock) |
| { |
| return 0; |
| } |
| |
| /* |
| * This callback should remove power on the socket, disable IRQs from |
| * the card, turn off status interrupts, and disable the PCMCIA bus. |
| * |
| * Hardware cannot do that. |
| */ |
| static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock) |
| { |
| return 0; |
| } |
| |
| /* |
| * Implements the set_socket() operation for the in-kernel PCMCIA |
| * service (formerly SS_SetSocket in Card Services). We more or |
| * less punt all of this work and let the kernel handle the details |
| * of power configuration, reset, &c. We also record the value of |
| * `state' in order to regurgitate it to the PCMCIA core later. |
| */ |
| static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock, |
| socket_state_t *state) |
| { |
| struct bcm63xx_pcmcia_socket *skt; |
| unsigned long flags; |
| u32 val; |
| |
| skt = sock->driver_data; |
| |
| spin_lock_irqsave(&skt->lock, flags); |
| |
| /* note: hardware cannot control socket power, so we will |
| * always report SS_POWERON */ |
| |
| /* apply socket reset */ |
| val = pcmcia_readl(skt, PCMCIA_C1_REG); |
| if (state->flags & SS_RESET) |
| val |= PCMCIA_C1_RESET_MASK; |
| else |
| val &= ~PCMCIA_C1_RESET_MASK; |
| |
| /* reverse reset logic for cardbus card */ |
| if (skt->card_detected && (skt->card_type & CARD_CARDBUS)) |
| val ^= PCMCIA_C1_RESET_MASK; |
| |
| pcmcia_writel(skt, val, PCMCIA_C1_REG); |
| |
| /* keep requested state for event reporting */ |
| skt->requested_state = *state; |
| |
| spin_unlock_irqrestore(&skt->lock, flags); |
| |
| return 0; |
| } |
| |
| /* |
| * identity cardtype from VS[12] input, CD[12] input while only VS2 is |
| * floating, and CD[12] input while only VS1 is floating |
| */ |
| enum { |
| IN_VS1 = (1 << 0), |
| IN_VS2 = (1 << 1), |
| IN_CD1_VS2H = (1 << 2), |
| IN_CD2_VS2H = (1 << 3), |
| IN_CD1_VS1H = (1 << 4), |
| IN_CD2_VS1H = (1 << 5), |
| }; |
| |
| static const u8 vscd_to_cardtype[] = { |
| |
| /* VS1 float, VS2 float */ |
| [IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V), |
| |
| /* VS1 grounded, VS2 float */ |
| [IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V), |
| |
| /* VS1 grounded, VS2 grounded */ |
| [0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV), |
| |
| /* VS1 tied to CD1, VS2 float */ |
| [IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V), |
| |
| /* VS1 grounded, VS2 tied to CD2 */ |
| [IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV), |
| |
| /* VS1 tied to CD2, VS2 grounded */ |
| [IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV), |
| |
| /* VS1 float, VS2 grounded */ |
| [IN_VS1] = (CARD_PCCARD | CARD_XV), |
| |
| /* VS1 float, VS2 tied to CD2 */ |
| [IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V), |
| |
| /* VS1 float, VS2 tied to CD1 */ |
| [IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV), |
| |
| /* VS1 tied to CD2, VS2 float */ |
| [IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV), |
| |
| /* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */ |
| [IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */ |
| }; |
| |
| /* |
| * poll hardware to check card insertion status |
| */ |
| static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt) |
| { |
| unsigned int stat; |
| u32 val; |
| |
| stat = 0; |
| |
| /* check CD for card presence */ |
| val = pcmcia_readl(skt, PCMCIA_C1_REG); |
| |
| if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK)) |
| stat |= SS_DETECT; |
| |
| /* if new insertion, detect cardtype */ |
| if ((stat & SS_DETECT) && !skt->card_detected) { |
| unsigned int stat = 0; |
| |
| /* float VS1, float VS2 */ |
| val |= PCMCIA_C1_VS1OE_MASK; |
| val |= PCMCIA_C1_VS2OE_MASK; |
| pcmcia_writel(skt, val, PCMCIA_C1_REG); |
| |
| /* wait for output to stabilize and read VS[12] */ |
| udelay(10); |
| val = pcmcia_readl(skt, PCMCIA_C1_REG); |
| stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0; |
| stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0; |
| |
| /* drive VS1 low, float VS2 */ |
| val &= ~PCMCIA_C1_VS1OE_MASK; |
| val |= PCMCIA_C1_VS2OE_MASK; |
| pcmcia_writel(skt, val, PCMCIA_C1_REG); |
| |
| /* wait for output to stabilize and read CD[12] */ |
| udelay(10); |
| val = pcmcia_readl(skt, PCMCIA_C1_REG); |
| stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0; |
| stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0; |
| |
| /* float VS1, drive VS2 low */ |
| val |= PCMCIA_C1_VS1OE_MASK; |
| val &= ~PCMCIA_C1_VS2OE_MASK; |
| pcmcia_writel(skt, val, PCMCIA_C1_REG); |
| |
| /* wait for output to stabilize and read CD[12] */ |
| udelay(10); |
| val = pcmcia_readl(skt, PCMCIA_C1_REG); |
| stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0; |
| stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0; |
| |
| /* guess cardtype from all this */ |
| skt->card_type = vscd_to_cardtype[stat]; |
| if (!skt->card_type) |
| dev_err(&skt->socket.dev, "unsupported card type\n"); |
| |
| /* drive both VS pin to 0 again */ |
| val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK); |
| |
| /* enable correct logic */ |
| val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK); |
| if (skt->card_type & CARD_PCCARD) |
| val |= PCMCIA_C1_EN_PCMCIA_MASK; |
| else |
| val |= PCMCIA_C1_EN_CARDBUS_MASK; |
| |
| pcmcia_writel(skt, val, PCMCIA_C1_REG); |
| } |
| skt->card_detected = (stat & SS_DETECT) ? 1 : 0; |
| |
| /* report card type/voltage */ |
| if (skt->card_type & CARD_CARDBUS) |
| stat |= SS_CARDBUS; |
| if (skt->card_type & CARD_3V) |
| stat |= SS_3VCARD; |
| if (skt->card_type & CARD_XV) |
| stat |= SS_XVCARD; |
| stat |= SS_POWERON; |
| |
| if (gpio_get_value(skt->pd->ready_gpio)) |
| stat |= SS_READY; |
| |
| return stat; |
| } |
| |
| /* |
| * core request to get current socket status |
| */ |
| static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock, |
| unsigned int *status) |
| { |
| struct bcm63xx_pcmcia_socket *skt; |
| |
| skt = sock->driver_data; |
| |
| spin_lock_bh(&skt->lock); |
| *status = __get_socket_status(skt); |
| spin_unlock_bh(&skt->lock); |
| |
| return 0; |
| } |
| |
| /* |
| * socket polling timer callback |
| */ |
| static void bcm63xx_pcmcia_poll(struct timer_list *t) |
| { |
| struct bcm63xx_pcmcia_socket *skt; |
| unsigned int stat, events; |
| |
| skt = from_timer(skt, t, timer); |
| |
| spin_lock_bh(&skt->lock); |
| |
| stat = __get_socket_status(skt); |
| |
| /* keep only changed bits, and mask with required one from the |
| * core */ |
| events = (stat ^ skt->old_status) & skt->requested_state.csc_mask; |
| skt->old_status = stat; |
| spin_unlock_bh(&skt->lock); |
| |
| if (events) |
| pcmcia_parse_events(&skt->socket, events); |
| |
| mod_timer(&skt->timer, |
| jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); |
| } |
| |
| static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock, |
| struct pccard_io_map *map) |
| { |
| /* this doesn't seem to be called by pcmcia layer if static |
| * mapping is used */ |
| return 0; |
| } |
| |
| static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock, |
| struct pccard_mem_map *map) |
| { |
| struct bcm63xx_pcmcia_socket *skt; |
| struct resource *res; |
| |
| skt = sock->driver_data; |
| if (map->flags & MAP_ATTRIB) |
| res = skt->attr_res; |
| else |
| res = skt->common_res; |
| |
| map->static_start = res->start + map->card_start; |
| return 0; |
| } |
| |
| static struct pccard_operations bcm63xx_pcmcia_operations = { |
| .init = bcm63xx_pcmcia_sock_init, |
| .suspend = bcm63xx_pcmcia_suspend, |
| .get_status = bcm63xx_pcmcia_get_status, |
| .set_socket = bcm63xx_pcmcia_set_socket, |
| .set_io_map = bcm63xx_pcmcia_set_io_map, |
| .set_mem_map = bcm63xx_pcmcia_set_mem_map, |
| }; |
| |
| /* |
| * register pcmcia socket to core |
| */ |
| static int bcm63xx_drv_pcmcia_probe(struct platform_device *pdev) |
| { |
| struct bcm63xx_pcmcia_socket *skt; |
| struct pcmcia_socket *sock; |
| struct resource *res; |
| unsigned int regmem_size = 0, iomem_size = 0; |
| u32 val; |
| int ret; |
| int irq; |
| |
| skt = kzalloc(sizeof(*skt), GFP_KERNEL); |
| if (!skt) |
| return -ENOMEM; |
| spin_lock_init(&skt->lock); |
| sock = &skt->socket; |
| sock->driver_data = skt; |
| |
| /* make sure we have all resources we need */ |
| skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2); |
| irq = platform_get_irq(pdev, 0); |
| skt->pd = pdev->dev.platform_data; |
| if (!skt->common_res || !skt->attr_res || (irq < 0) || !skt->pd) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| /* remap pcmcia registers */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| regmem_size = resource_size(res); |
| if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) { |
| ret = -EINVAL; |
| goto err; |
| } |
| skt->reg_res = res; |
| |
| skt->base = ioremap(res->start, regmem_size); |
| if (!skt->base) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| /* remap io registers */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 3); |
| iomem_size = resource_size(res); |
| skt->io_base = ioremap(res->start, iomem_size); |
| if (!skt->io_base) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| /* resources are static */ |
| sock->resource_ops = &pccard_static_ops; |
| sock->ops = &bcm63xx_pcmcia_operations; |
| sock->owner = THIS_MODULE; |
| sock->dev.parent = &pdev->dev; |
| sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD; |
| sock->io_offset = (unsigned long)skt->io_base; |
| sock->pci_irq = irq; |
| |
| #ifdef CONFIG_CARDBUS |
| sock->cb_dev = bcm63xx_cb_dev; |
| if (bcm63xx_cb_dev) |
| sock->features |= SS_CAP_CARDBUS; |
| #endif |
| |
| /* assume common & attribute memory have the same size */ |
| sock->map_size = resource_size(skt->common_res); |
| |
| /* initialize polling timer */ |
| timer_setup(&skt->timer, bcm63xx_pcmcia_poll, 0); |
| |
| /* initialize pcmcia control register, drive VS[12] to 0, |
| * leave CB IDSEL to the old value since it is set by the PCI |
| * layer */ |
| val = pcmcia_readl(skt, PCMCIA_C1_REG); |
| val &= PCMCIA_C1_CBIDSEL_MASK; |
| val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK; |
| pcmcia_writel(skt, val, PCMCIA_C1_REG); |
| |
| /* |
| * Hardware has only one set of timings registers, not one for |
| * each memory access type, so we configure them for the |
| * slowest one: attribute memory. |
| */ |
| val = PCMCIA_C2_DATA16_MASK; |
| val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT; |
| val |= 6 << PCMCIA_C2_INACTIVE_SHIFT; |
| val |= 3 << PCMCIA_C2_SETUP_SHIFT; |
| val |= 3 << PCMCIA_C2_HOLD_SHIFT; |
| pcmcia_writel(skt, val, PCMCIA_C2_REG); |
| |
| ret = pcmcia_register_socket(sock); |
| if (ret) |
| goto err; |
| |
| /* start polling socket */ |
| mod_timer(&skt->timer, |
| jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); |
| |
| platform_set_drvdata(pdev, skt); |
| return 0; |
| |
| err: |
| if (skt->io_base) |
| iounmap(skt->io_base); |
| if (skt->base) |
| iounmap(skt->base); |
| if (skt->reg_res) |
| release_mem_region(skt->reg_res->start, regmem_size); |
| kfree(skt); |
| return ret; |
| } |
| |
| static int bcm63xx_drv_pcmcia_remove(struct platform_device *pdev) |
| { |
| struct bcm63xx_pcmcia_socket *skt; |
| struct resource *res; |
| |
| skt = platform_get_drvdata(pdev); |
| del_timer_sync(&skt->timer); |
| iounmap(skt->base); |
| iounmap(skt->io_base); |
| res = skt->reg_res; |
| release_mem_region(res->start, resource_size(res)); |
| kfree(skt); |
| return 0; |
| } |
| |
| struct platform_driver bcm63xx_pcmcia_driver = { |
| .probe = bcm63xx_drv_pcmcia_probe, |
| .remove = bcm63xx_drv_pcmcia_remove, |
| .driver = { |
| .name = "bcm63xx_pcmcia", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| #ifdef CONFIG_CARDBUS |
| static int bcm63xx_cb_probe(struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| /* keep pci device */ |
| bcm63xx_cb_dev = dev; |
| return platform_driver_register(&bcm63xx_pcmcia_driver); |
| } |
| |
| static void bcm63xx_cb_exit(struct pci_dev *dev) |
| { |
| platform_driver_unregister(&bcm63xx_pcmcia_driver); |
| bcm63xx_cb_dev = NULL; |
| } |
| |
| static const struct pci_device_id bcm63xx_cb_table[] = { |
| { |
| .vendor = PCI_VENDOR_ID_BROADCOM, |
| .device = BCM6348_CPU_ID, |
| .subvendor = PCI_VENDOR_ID_BROADCOM, |
| .subdevice = PCI_ANY_ID, |
| .class = PCI_CLASS_BRIDGE_CARDBUS << 8, |
| .class_mask = ~0, |
| }, |
| |
| { |
| .vendor = PCI_VENDOR_ID_BROADCOM, |
| .device = BCM6358_CPU_ID, |
| .subvendor = PCI_VENDOR_ID_BROADCOM, |
| .subdevice = PCI_ANY_ID, |
| .class = PCI_CLASS_BRIDGE_CARDBUS << 8, |
| .class_mask = ~0, |
| }, |
| |
| { }, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table); |
| |
| static struct pci_driver bcm63xx_cardbus_driver = { |
| .name = "bcm63xx_cardbus", |
| .id_table = bcm63xx_cb_table, |
| .probe = bcm63xx_cb_probe, |
| .remove = bcm63xx_cb_exit, |
| }; |
| #endif |
| |
| /* |
| * if cardbus support is enabled, register our platform device after |
| * our fake cardbus bridge has been registered |
| */ |
| static int __init bcm63xx_pcmcia_init(void) |
| { |
| #ifdef CONFIG_CARDBUS |
| return pci_register_driver(&bcm63xx_cardbus_driver); |
| #else |
| return platform_driver_register(&bcm63xx_pcmcia_driver); |
| #endif |
| } |
| |
| static void __exit bcm63xx_pcmcia_exit(void) |
| { |
| #ifdef CONFIG_CARDBUS |
| return pci_unregister_driver(&bcm63xx_cardbus_driver); |
| #else |
| platform_driver_unregister(&bcm63xx_pcmcia_driver); |
| #endif |
| } |
| |
| module_init(bcm63xx_pcmcia_init); |
| module_exit(bcm63xx_pcmcia_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>"); |
| MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller"); |