| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mtd/qcom,nandc.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm NAND controller |
| |
| maintainers: |
| - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
| |
| properties: |
| compatible: |
| enum: |
| - qcom,ipq806x-nand |
| - qcom,ipq4019-nand |
| - qcom,ipq6018-nand |
| - qcom,ipq8074-nand |
| - qcom,sdx55-nand |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| items: |
| - description: Core Clock |
| - description: Always ON Clock |
| |
| clock-names: |
| items: |
| - const: core |
| - const: aon |
| |
| "#address-cells": true |
| "#size-cells": true |
| |
| patternProperties: |
| "^nand@[a-f0-9]$": |
| type: object |
| properties: |
| nand-bus-width: |
| const: 8 |
| |
| nand-ecc-strength: |
| enum: [1, 4, 8] |
| |
| nand-ecc-step-size: |
| enum: |
| - 512 |
| |
| allOf: |
| - $ref: "nand-controller.yaml#" |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: qcom,ipq806x-nand |
| then: |
| properties: |
| dmas: |
| items: |
| - description: rxtx DMA channel |
| |
| dma-names: |
| items: |
| - const: rxtx |
| |
| qcom,cmd-crci: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| Must contain the ADM command type CRCI block instance number |
| specified for the NAND controller on the given platform |
| |
| qcom,data-crci: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| Must contain the ADM data type CRCI block instance number |
| specified for the NAND controller on the given platform |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - qcom,ipq4019-nand |
| - qcom,ipq6018-nand |
| - qcom,ipq8074-nand |
| - qcom,sdx55-nand |
| |
| then: |
| properties: |
| dmas: |
| items: |
| - description: tx DMA channel |
| - description: rx DMA channel |
| - description: cmd DMA channel |
| |
| dma-names: |
| items: |
| - const: tx |
| - const: rx |
| - const: cmd |
| |
| required: |
| - compatible |
| - reg |
| - clocks |
| - clock-names |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/qcom,gcc-ipq806x.h> |
| nand-controller@1ac00000 { |
| compatible = "qcom,ipq806x-nand"; |
| reg = <0x1ac00000 0x800>; |
| |
| clocks = <&gcc EBI2_CLK>, |
| <&gcc EBI2_AON_CLK>; |
| clock-names = "core", "aon"; |
| |
| dmas = <&adm_dma 3>; |
| dma-names = "rxtx"; |
| qcom,cmd-crci = <15>; |
| qcom,data-crci = <3>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| nand@0 { |
| reg = <0>; |
| |
| nand-ecc-strength = <4>; |
| nand-bus-width = <8>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "boot-nand"; |
| reg = <0 0x58a0000>; |
| }; |
| |
| partition@58a0000 { |
| label = "fs-nand"; |
| reg = <0x58a0000 0x4000000>; |
| }; |
| }; |
| }; |
| }; |
| |
| #include <dt-bindings/clock/qcom,gcc-ipq4019.h> |
| nand-controller@79b0000 { |
| compatible = "qcom,ipq4019-nand"; |
| reg = <0x79b0000 0x1000>; |
| |
| clocks = <&gcc GCC_QPIC_CLK>, |
| <&gcc GCC_QPIC_AHB_CLK>; |
| clock-names = "core", "aon"; |
| |
| dmas = <&qpicbam 0>, |
| <&qpicbam 1>, |
| <&qpicbam 2>; |
| dma-names = "tx", "rx", "cmd"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| nand@0 { |
| reg = <0>; |
| nand-ecc-strength = <4>; |
| nand-bus-width = <8>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "boot-nand"; |
| reg = <0 0x58a0000>; |
| }; |
| |
| partition@58a0000 { |
| label = "fs-nand"; |
| reg = <0x58a0000 0x4000000>; |
| }; |
| }; |
| }; |
| }; |
| |
| ... |