| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for Digigram VX soundcards |
| * |
| * DSP firmware management |
| * |
| * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de> |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/firmware.h> |
| #include <linux/slab.h> |
| #include <linux/vmalloc.h> |
| #include <linux/module.h> |
| #include <sound/core.h> |
| #include <sound/hwdep.h> |
| #include <sound/vx_core.h> |
| |
| MODULE_FIRMWARE("vx/bx_1_vxp.b56"); |
| MODULE_FIRMWARE("vx/bx_1_vp4.b56"); |
| MODULE_FIRMWARE("vx/x1_1_vx2.xlx"); |
| MODULE_FIRMWARE("vx/x1_2_v22.xlx"); |
| MODULE_FIRMWARE("vx/x1_1_vxp.xlx"); |
| MODULE_FIRMWARE("vx/x1_1_vp4.xlx"); |
| MODULE_FIRMWARE("vx/bd56002.boot"); |
| MODULE_FIRMWARE("vx/bd563v2.boot"); |
| MODULE_FIRMWARE("vx/bd563s3.boot"); |
| MODULE_FIRMWARE("vx/l_1_vx2.d56"); |
| MODULE_FIRMWARE("vx/l_1_v22.d56"); |
| MODULE_FIRMWARE("vx/l_1_vxp.d56"); |
| MODULE_FIRMWARE("vx/l_1_vp4.d56"); |
| |
| int snd_vx_setup_firmware(struct vx_core *chip) |
| { |
| static const char * const fw_files[VX_TYPE_NUMS][4] = { |
| [VX_TYPE_BOARD] = { |
| NULL, "x1_1_vx2.xlx", "bd56002.boot", "l_1_vx2.d56", |
| }, |
| [VX_TYPE_V2] = { |
| NULL, "x1_2_v22.xlx", "bd563v2.boot", "l_1_v22.d56", |
| }, |
| [VX_TYPE_MIC] = { |
| NULL, "x1_2_v22.xlx", "bd563v2.boot", "l_1_v22.d56", |
| }, |
| [VX_TYPE_VXPOCKET] = { |
| "bx_1_vxp.b56", "x1_1_vxp.xlx", "bd563s3.boot", "l_1_vxp.d56" |
| }, |
| [VX_TYPE_VXP440] = { |
| "bx_1_vp4.b56", "x1_1_vp4.xlx", "bd563s3.boot", "l_1_vp4.d56" |
| }, |
| }; |
| |
| int i, err; |
| |
| for (i = 0; i < 4; i++) { |
| char path[32]; |
| const struct firmware *fw; |
| if (! fw_files[chip->type][i]) |
| continue; |
| sprintf(path, "vx/%s", fw_files[chip->type][i]); |
| if (request_firmware(&fw, path, chip->dev)) { |
| snd_printk(KERN_ERR "vx: can't load firmware %s\n", path); |
| return -ENOENT; |
| } |
| err = chip->ops->load_dsp(chip, i, fw); |
| if (err < 0) { |
| release_firmware(fw); |
| return err; |
| } |
| if (i == 1) |
| chip->chip_status |= VX_STAT_XILINX_LOADED; |
| #ifdef CONFIG_PM |
| chip->firmware[i] = fw; |
| #else |
| release_firmware(fw); |
| #endif |
| } |
| |
| /* ok, we reached to the last one */ |
| /* create the devices if not built yet */ |
| err = snd_vx_pcm_new(chip); |
| if (err < 0) |
| return err; |
| |
| err = snd_vx_mixer_new(chip); |
| if (err < 0) |
| return err; |
| |
| if (chip->ops->add_controls) { |
| err = chip->ops->add_controls(chip); |
| if (err < 0) |
| return err; |
| } |
| |
| chip->chip_status |= VX_STAT_DEVICE_INIT; |
| chip->chip_status |= VX_STAT_CHIP_INIT; |
| |
| return snd_card_register(chip->card); |
| } |
| |
| /* exported */ |
| void snd_vx_free_firmware(struct vx_core *chip) |
| { |
| #ifdef CONFIG_PM |
| int i; |
| for (i = 0; i < 4; i++) |
| release_firmware(chip->firmware[i]); |
| #endif |
| } |
| |
| EXPORT_SYMBOL(snd_vx_setup_firmware); |
| EXPORT_SYMBOL(snd_vx_free_firmware); |