| /* |
| * Sonics Silicon Backplane |
| * PCMCIA-Hostbus related functions |
| * |
| * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> |
| * Copyright 2007 Michael Buesch <mb@bu3sch.de> |
| * |
| * Licensed under the GNU/GPL. See COPYING for details. |
| */ |
| |
| #include <linux/ssb/ssb.h> |
| #include <linux/delay.h> |
| |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/ciscode.h> |
| #include <pcmcia/ds.h> |
| #include <pcmcia/cisreg.h> |
| |
| #include "ssb_private.h" |
| |
| |
| /* Define the following to 1 to enable a printk on each coreswitch. */ |
| #define SSB_VERBOSE_PCMCIACORESWITCH_DEBUG 0 |
| |
| |
| int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus, |
| u8 coreidx) |
| { |
| struct pcmcia_device *pdev = bus->host_pcmcia; |
| int err; |
| int attempts = 0; |
| u32 cur_core; |
| conf_reg_t reg; |
| u32 addr; |
| u32 read_addr; |
| |
| addr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE; |
| while (1) { |
| reg.Action = CS_WRITE; |
| reg.Offset = 0x2E; |
| reg.Value = (addr & 0x0000F000) >> 12; |
| err = pcmcia_access_configuration_register(pdev, ®); |
| if (err != CS_SUCCESS) |
| goto error; |
| reg.Offset = 0x30; |
| reg.Value = (addr & 0x00FF0000) >> 16; |
| err = pcmcia_access_configuration_register(pdev, ®); |
| if (err != CS_SUCCESS) |
| goto error; |
| reg.Offset = 0x32; |
| reg.Value = (addr & 0xFF000000) >> 24; |
| err = pcmcia_access_configuration_register(pdev, ®); |
| if (err != CS_SUCCESS) |
| goto error; |
| |
| read_addr = 0; |
| |
| reg.Action = CS_READ; |
| reg.Offset = 0x2E; |
| err = pcmcia_access_configuration_register(pdev, ®); |
| if (err != CS_SUCCESS) |
| goto error; |
| read_addr |= (reg.Value & 0xF) << 12; |
| reg.Offset = 0x30; |
| err = pcmcia_access_configuration_register(pdev, ®); |
| if (err != CS_SUCCESS) |
| goto error; |
| read_addr |= reg.Value << 16; |
| reg.Offset = 0x32; |
| err = pcmcia_access_configuration_register(pdev, ®); |
| if (err != CS_SUCCESS) |
| goto error; |
| read_addr |= reg.Value << 24; |
| |
| cur_core = (read_addr - SSB_ENUM_BASE) / SSB_CORE_SIZE; |
| if (cur_core == coreidx) |
| break; |
| |
| if (attempts++ > SSB_BAR0_MAX_RETRIES) |
| goto error; |
| udelay(10); |
| } |
| |
| return 0; |
| error: |
| ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx); |
| return -ENODEV; |
| } |
| |
| int ssb_pcmcia_switch_core(struct ssb_bus *bus, |
| struct ssb_device *dev) |
| { |
| int err; |
| unsigned long flags; |
| |
| #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG |
| ssb_printk(KERN_INFO PFX |
| "Switching to %s core, index %d\n", |
| ssb_core_name(dev->id.coreid), |
| dev->core_index); |
| #endif |
| |
| spin_lock_irqsave(&bus->bar_lock, flags); |
| err = ssb_pcmcia_switch_coreidx(bus, dev->core_index); |
| if (!err) |
| bus->mapped_device = dev; |
| spin_unlock_irqrestore(&bus->bar_lock, flags); |
| |
| return err; |
| } |
| |
| int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg) |
| { |
| int attempts = 0; |
| unsigned long flags; |
| conf_reg_t reg; |
| int res, err = 0; |
| |
| SSB_WARN_ON((seg != 0) && (seg != 1)); |
| reg.Offset = 0x34; |
| reg.Function = 0; |
| spin_lock_irqsave(&bus->bar_lock, flags); |
| while (1) { |
| reg.Action = CS_WRITE; |
| reg.Value = seg; |
| res = pcmcia_access_configuration_register(bus->host_pcmcia, ®); |
| if (unlikely(res != CS_SUCCESS)) |
| goto error; |
| reg.Value = 0xFF; |
| reg.Action = CS_READ; |
| res = pcmcia_access_configuration_register(bus->host_pcmcia, ®); |
| if (unlikely(res != CS_SUCCESS)) |
| goto error; |
| |
| if (reg.Value == seg) |
| break; |
| |
| if (unlikely(attempts++ > SSB_BAR0_MAX_RETRIES)) |
| goto error; |
| udelay(10); |
| } |
| bus->mapped_pcmcia_seg = seg; |
| out_unlock: |
| spin_unlock_irqrestore(&bus->bar_lock, flags); |
| return err; |
| error: |
| ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n"); |
| err = -ENODEV; |
| goto out_unlock; |
| } |
| |
| /* These are the main device register access functions. |
| * do_select_core is inline to have the likely hotpath inline. |
| * All unlikely codepaths are out-of-line. */ |
| static inline int do_select_core(struct ssb_bus *bus, |
| struct ssb_device *dev, |
| u16 *offset) |
| { |
| int err; |
| u8 need_seg = (*offset >= 0x800) ? 1 : 0; |
| |
| if (unlikely(dev != bus->mapped_device)) { |
| err = ssb_pcmcia_switch_core(bus, dev); |
| if (unlikely(err)) |
| return err; |
| } |
| if (unlikely(need_seg != bus->mapped_pcmcia_seg)) { |
| err = ssb_pcmcia_switch_segment(bus, need_seg); |
| if (unlikely(err)) |
| return err; |
| } |
| if (need_seg == 1) |
| *offset -= 0x800; |
| |
| return 0; |
| } |
| |
| static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset) |
| { |
| struct ssb_bus *bus = dev->bus; |
| u16 x; |
| |
| if (unlikely(do_select_core(bus, dev, &offset))) |
| return 0xFFFF; |
| x = readw(bus->mmio + offset); |
| |
| return x; |
| } |
| |
| static u32 ssb_pcmcia_read32(struct ssb_device *dev, u16 offset) |
| { |
| struct ssb_bus *bus = dev->bus; |
| u32 x; |
| |
| if (unlikely(do_select_core(bus, dev, &offset))) |
| return 0xFFFFFFFF; |
| x = readl(bus->mmio + offset); |
| |
| return x; |
| } |
| |
| static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value) |
| { |
| struct ssb_bus *bus = dev->bus; |
| |
| if (unlikely(do_select_core(bus, dev, &offset))) |
| return; |
| writew(value, bus->mmio + offset); |
| } |
| |
| static void ssb_pcmcia_write32(struct ssb_device *dev, u16 offset, u32 value) |
| { |
| struct ssb_bus *bus = dev->bus; |
| |
| if (unlikely(do_select_core(bus, dev, &offset))) |
| return; |
| readw(bus->mmio + offset); |
| writew(value >> 16, bus->mmio + offset + 2); |
| readw(bus->mmio + offset); |
| writew(value, bus->mmio + offset); |
| } |
| |
| /* Not "static", as it's used in main.c */ |
| const struct ssb_bus_ops ssb_pcmcia_ops = { |
| .read16 = ssb_pcmcia_read16, |
| .read32 = ssb_pcmcia_read32, |
| .write16 = ssb_pcmcia_write16, |
| .write32 = ssb_pcmcia_write32, |
| }; |
| |
| int ssb_pcmcia_get_invariants(struct ssb_bus *bus, |
| struct ssb_init_invariants *iv) |
| { |
| //TODO |
| return 0; |
| } |
| |
| int ssb_pcmcia_init(struct ssb_bus *bus) |
| { |
| conf_reg_t reg; |
| int err; |
| |
| if (bus->bustype != SSB_BUSTYPE_PCMCIA) |
| return 0; |
| |
| /* Switch segment to a known state and sync |
| * bus->mapped_pcmcia_seg with hardware state. */ |
| ssb_pcmcia_switch_segment(bus, 0); |
| |
| /* Init IRQ routing */ |
| reg.Action = CS_READ; |
| reg.Function = 0; |
| if (bus->chip_id == 0x4306) |
| reg.Offset = 0x00; |
| else |
| reg.Offset = 0x80; |
| err = pcmcia_access_configuration_register(bus->host_pcmcia, ®); |
| if (err != CS_SUCCESS) |
| goto error; |
| reg.Action = CS_WRITE; |
| reg.Value |= 0x04 | 0x01; |
| err = pcmcia_access_configuration_register(bus->host_pcmcia, ®); |
| if (err != CS_SUCCESS) |
| goto error; |
| |
| return 0; |
| error: |
| return -ENODEV; |
| } |