| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Device Tree Include file for Marvell Armada 39x family of SoCs. |
| * |
| * Copyright (C) 2015 Marvell |
| * |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| model = "Marvell Armada 39x family SoC"; |
| compatible = "marvell,armada390"; |
| |
| aliases { |
| gpio0 = &gpio0; |
| gpio1 = &gpio1; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| serial3 = &uart3; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-method = "marvell,armada-390-smp"; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0>; |
| }; |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <1>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts-extended = <&mpic 3>; |
| }; |
| |
| soc { |
| compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus", |
| "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| controller = <&mbusc>; |
| interrupt-parent = <&gic>; |
| pcie-mem-aperture = <0xe0000000 0x8000000>; |
| pcie-io-aperture = <0xe8000000 0x100000>; |
| |
| bootrom { |
| compatible = "marvell,bootrom"; |
| reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>; |
| }; |
| |
| internal-regs { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; |
| |
| L2: cache-controller@8000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x8000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| arm,double-linefill-incr = <0>; |
| arm,double-linefill-wrap = <0>; |
| arm,double-linefill = <0>; |
| prefetch-data = <1>; |
| }; |
| |
| scu@c000 { |
| compatible = "arm,cortex-a9-scu"; |
| reg = <0xc000 0x100>; |
| }; |
| |
| timer@c600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0xc600 0x20>; |
| interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; |
| clocks = <&coreclk 2>; |
| }; |
| |
| gic: interrupt-controller@d000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #size-cells = <0>; |
| interrupt-controller; |
| reg = <0xd000 0x1000>, |
| <0xc100 0x100>; |
| }; |
| |
| i2c0: i2c@11000 { |
| compatible = "marvell,mv64xxx-i2c"; |
| reg = <0x11000 0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@11100 { |
| compatible = "marvell,mv64xxx-i2c"; |
| reg = <0x11100 0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@11200 { |
| compatible = "marvell,mv64xxx-i2c"; |
| reg = <0x11200 0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@11300 { |
| compatible = "marvell,mv64xxx-i2c"; |
| reg = <0x11300 0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@12000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x12000 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@12100 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x12100 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@12200 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x12200 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@12300 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x12300 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| pinctrl@18000 { |
| i2c0_pins: i2c0-pins { |
| marvell,pins = "mpp2", "mpp3"; |
| marvell,function = "i2c0"; |
| }; |
| |
| uart0_pins: uart0-pins { |
| marvell,pins = "mpp0", "mpp1"; |
| marvell,function = "ua0"; |
| }; |
| |
| uart1_pins: uart1-pins { |
| marvell,pins = "mpp19", "mpp20"; |
| marvell,function = "ua1"; |
| }; |
| |
| spi1_pins: spi1-pins { |
| marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59"; |
| marvell,function = "spi1"; |
| }; |
| |
| nand_pins: nand-pins { |
| marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33", |
| "mpp38", "mpp28", "mpp40", "mpp42", |
| "mpp35", "mpp36", "mpp25", "mpp30", |
| "mpp32"; |
| marvell,function = "dev"; |
| }; |
| }; |
| |
| gpio0: gpio@18100 { |
| compatible = "marvell,orion-gpio"; |
| reg = <0x18100 0x40>; |
| ngpios = <32>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpio1: gpio@18140 { |
| compatible = "marvell,orion-gpio"; |
| reg = <0x18140 0x40>; |
| ngpios = <28>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| system-controller@18200 { |
| compatible = "marvell,armada-390-system-controller", |
| "marvell,armada-370-xp-system-controller"; |
| reg = <0x18200 0x100>; |
| }; |
| |
| gateclk: clock-gating-control@18220 { |
| compatible = "marvell,armada-390-gating-clock"; |
| reg = <0x18220 0x4>; |
| clocks = <&coreclk 0>; |
| #clock-cells = <1>; |
| }; |
| |
| coreclk: mvebu-sar@18600 { |
| compatible = "marvell,armada-390-core-clock"; |
| reg = <0x18600 0x04>; |
| #clock-cells = <1>; |
| }; |
| |
| mbusc: mbus-controller@20000 { |
| compatible = "marvell,mbus-controller"; |
| reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>; |
| }; |
| |
| mpic: interrupt-controller@20a00 { |
| compatible = "marvell,mpic"; |
| reg = <0x20a00 0x2d0>, <0x21070 0x58>; |
| #interrupt-cells = <1>; |
| #size-cells = <1>; |
| interrupt-controller; |
| msi-controller; |
| interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| timer@20300 { |
| compatible = "marvell,armada-380-timer", |
| "marvell,armada-xp-timer"; |
| reg = <0x20300 0x30>, <0x21040 0x30>; |
| interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <&mpic 5>, |
| <&mpic 6>; |
| clocks = <&coreclk 2>, <&coreclk 5>; |
| clock-names = "nbclk", "fixed"; |
| }; |
| |
| watchdog@20300 { |
| compatible = "marvell,armada-380-wdt"; |
| reg = <0x20300 0x34>, <0x20704 0x4>, |
| <0x18260 0x4>; |
| clocks = <&coreclk 2>, <&refclk>; |
| clock-names = "nbclk", "fixed"; |
| }; |
| |
| cpurst@20800 { |
| compatible = "marvell,armada-370-cpu-reset"; |
| reg = <0x20800 0x10>; |
| }; |
| |
| mpcore-soc-ctrl@20d20 { |
| compatible = "marvell,armada-380-mpcore-soc-ctrl"; |
| reg = <0x20d20 0x6c>; |
| }; |
| |
| coherency-fabric@21010 { |
| compatible = "marvell,armada-380-coherency-fabric"; |
| reg = <0x21010 0x1c>; |
| }; |
| |
| pmsu@22000 { |
| compatible = "marvell,armada-390-pmsu", |
| "marvell,armada-380-pmsu"; |
| reg = <0x22000 0x1000>; |
| }; |
| |
| xor@60800 { |
| compatible = "marvell,armada-380-xor", "marvell,orion-xor"; |
| reg = <0x60800 0x100 |
| 0x60a00 0x100>; |
| clocks = <&gateclk 22>; |
| status = "okay"; |
| |
| xor00 { |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| dmacap,memcpy; |
| dmacap,xor; |
| }; |
| xor01 { |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| dmacap,memcpy; |
| dmacap,xor; |
| dmacap,memset; |
| }; |
| }; |
| |
| xor@60900 { |
| compatible = "marvell,armada-380-xor", "marvell,orion-xor"; |
| reg = <0x60900 0x100 |
| 0x60b00 0x100>; |
| clocks = <&gateclk 28>; |
| status = "okay"; |
| |
| xor10 { |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| dmacap,memcpy; |
| dmacap,xor; |
| }; |
| xor11 { |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| dmacap,memcpy; |
| dmacap,xor; |
| dmacap,memset; |
| }; |
| }; |
| |
| rtc@a3800 { |
| compatible = "marvell,armada-380-rtc"; |
| reg = <0xa3800 0x20>, <0x184a0 0x0c>; |
| reg-names = "rtc", "rtc-soc"; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| nand_controller: nand-controller@d0000 { |
| compatible = "marvell,armada370-nand-controller"; |
| reg = <0xd0000 0x54>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&coredivclk 0>; |
| status = "disabled"; |
| }; |
| |
| sdhci@d8000 { |
| compatible = "marvell,armada-380-sdhci"; |
| reg-names = "sdhci", "mbus", "conf-sdio3"; |
| reg = <0xd8000 0x1000>, |
| <0xdc000 0x100>, |
| <0x18454 0x4>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gateclk 17>; |
| mrvl,clk-delay-cycles = <0x1F>; |
| status = "disabled"; |
| }; |
| |
| coredivclk: clock@e4250 { |
| compatible = "marvell,armada-390-corediv-clock", |
| "marvell,armada-380-corediv-clock"; |
| reg = <0xe4250 0xc>; |
| #clock-cells = <1>; |
| clocks = <&mainpll>; |
| clock-output-names = "nand"; |
| }; |
| |
| thermal@e8078 { |
| compatible = "marvell,armada380-thermal"; |
| reg = <0xe4078 0x4>, <0xe4074 0x4>; |
| status = "okay"; |
| }; |
| }; |
| |
| pcie { |
| compatible = "marvell,armada-370-pcie"; |
| status = "disabled"; |
| device_type = "pci"; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| |
| msi-parent = <&mpic>; |
| bus-range = <0x00 0xff>; |
| |
| ranges = |
| <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 |
| 0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 |
| 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 |
| 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 |
| 0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */ |
| 0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */ |
| 0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */ |
| 0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */ |
| 0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */ |
| 0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */ |
| 0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */ |
| 0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>; |
| |
| /* |
| * This port can be either x4 or x1. When |
| * configured in x4 by the bootloader, then |
| * pcie@4,0 is not available. |
| */ |
| pcie@1,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; |
| reg = <0x0800 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| interrupt-names = "intx"; |
| interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
| 0x81000000 0 0 0x81000000 0x1 0 1 0>; |
| bus-range = <0x00 0xff>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie1_intc 0>, |
| <0 0 0 2 &pcie1_intc 1>, |
| <0 0 0 3 &pcie1_intc 2>, |
| <0 0 0 4 &pcie1_intc 3>; |
| marvell,pcie-port = <0>; |
| marvell,pcie-lane = <0>; |
| clocks = <&gateclk 8>; |
| status = "disabled"; |
| |
| pcie1_intc: interrupt-controller { |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| /* x1 port */ |
| pcie@2,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; |
| reg = <0x1000 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| interrupt-names = "intx"; |
| interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
| 0x81000000 0 0 0x81000000 0x2 0 1 0>; |
| bus-range = <0x00 0xff>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie2_intc 0>, |
| <0 0 0 2 &pcie2_intc 1>, |
| <0 0 0 3 &pcie2_intc 2>, |
| <0 0 0 4 &pcie2_intc 3>; |
| marvell,pcie-port = <1>; |
| marvell,pcie-lane = <0>; |
| clocks = <&gateclk 5>; |
| status = "disabled"; |
| |
| pcie2_intc: interrupt-controller { |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| /* x1 port */ |
| pcie@3,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; |
| reg = <0x1800 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| interrupt-names = "intx"; |
| interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 |
| 0x81000000 0 0 0x81000000 0x3 0 1 0>; |
| bus-range = <0x00 0xff>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie3_intc 0>, |
| <0 0 0 2 &pcie3_intc 1>, |
| <0 0 0 3 &pcie3_intc 2>, |
| <0 0 0 4 &pcie3_intc 3>; |
| marvell,pcie-port = <2>; |
| marvell,pcie-lane = <0>; |
| clocks = <&gateclk 6>; |
| status = "disabled"; |
| |
| pcie3_intc: interrupt-controller { |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| /* |
| * x1 port only available when pcie@1,0 is |
| * configured as a x1 port |
| */ |
| pcie@4,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82002000 0 0x48000 0 0x2000>; |
| reg = <0x2000 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| interrupt-names = "intx"; |
| interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 |
| 0x81000000 0 0 0x81000000 0x4 0 1 0>; |
| bus-range = <0x00 0xff>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie4_intc 0>, |
| <0 0 0 2 &pcie4_intc 1>, |
| <0 0 0 3 &pcie4_intc 2>, |
| <0 0 0 4 &pcie4_intc 3>; |
| marvell,pcie-port = <3>; |
| marvell,pcie-lane = <0>; |
| clocks = <&gateclk 7>; |
| status = "disabled"; |
| |
| pcie4_intc: interrupt-controller { |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| }; |
| |
| spi0: spi@10600 { |
| compatible = "marvell,armada-390-spi", |
| "marvell,orion-spi"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@10680 { |
| compatible = "marvell,armada-390-spi", |
| "marvell,orion-spi"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| clocks { |
| /* 1 GHz fixed main PLL */ |
| mainpll: mainpll { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <1000000000>; |
| }; |
| |
| /* 25 MHz reference crystal */ |
| refclk: oscillator { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <25000000>; |
| }; |
| }; |
| }; |
