| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| // Copyright (C) 2017 Jagan Teki <jteki@openedev.com> |
| // Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org> |
| |
| /dts-v1/; |
| |
| #include "sun50i-a64.dtsi" |
| #include "sun50i-a64-cpu-opp.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "OrangePi Win/Win Plus"; |
| compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64"; |
| |
| aliases { |
| ethernet0 = &emac; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| serial3 = &uart3; |
| serial4 = &uart4; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| hdmi-connector { |
| compatible = "hdmi-connector"; |
| type = "a"; |
| |
| port { |
| hdmi_con_in: endpoint { |
| remote-endpoint = <&hdmi_out_con>; |
| }; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| status { |
| label = "orangepi:green:status"; |
| gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ |
| }; |
| }; |
| |
| reg_gmac_3v3: gmac-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "gmac-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| enable-active-high; |
| gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */ |
| status = "okay"; |
| }; |
| |
| reg_usb1_vbus: usb1-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb1-vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-boot-on; |
| enable-active-high; |
| gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */ |
| status = "okay"; |
| }; |
| |
| wifi_pwrseq: wifi_pwrseq { |
| compatible = "mmc-pwrseq-simple"; |
| reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ |
| clocks = <&rtc 1>; |
| clock-names = "ext_clock"; |
| }; |
| }; |
| |
| &codec { |
| status = "okay"; |
| }; |
| |
| &codec_analog { |
| cpvdd-supply = <®_eldo1>; |
| status = "okay"; |
| }; |
| |
| &cpu0 { |
| cpu-supply = <®_dcdc2>; |
| }; |
| |
| &cpu1 { |
| cpu-supply = <®_dcdc2>; |
| }; |
| |
| &cpu2 { |
| cpu-supply = <®_dcdc2>; |
| }; |
| |
| &cpu3 { |
| cpu-supply = <®_dcdc2>; |
| }; |
| |
| &dai { |
| status = "okay"; |
| }; |
| |
| &de { |
| status = "okay"; |
| }; |
| |
| &ehci0 { |
| status = "okay"; |
| }; |
| |
| &ehci1 { |
| status = "okay"; |
| }; |
| |
| &emac { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&rgmii_pins>; |
| phy-mode = "rgmii"; |
| phy-handle = <&ext_rgmii_phy>; |
| phy-supply = <®_gmac_3v3>; |
| status = "okay"; |
| }; |
| |
| &hdmi { |
| hvcc-supply = <®_dldo1>; |
| status = "okay"; |
| }; |
| |
| &hdmi_out { |
| hdmi_out_con: endpoint { |
| remote-endpoint = <&hdmi_con_in>; |
| }; |
| }; |
| |
| &mdio { |
| ext_rgmii_phy: ethernet-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <1>; |
| }; |
| }; |
| |
| &mmc0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc0_pins>; |
| vmmc-supply = <®_dcdc1>; |
| cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
| disable-wp; |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| &mmc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc1_pins>; |
| vmmc-supply = <®_dldo2>; |
| vqmmc-supply = <®_dldo4>; |
| mmc-pwrseq = <&wifi_pwrseq>; |
| bus-width = <4>; |
| non-removable; |
| status = "okay"; |
| |
| brcmf: wifi@1 { |
| reg = <1>; |
| compatible = "brcm,bcm4329-fmac"; |
| interrupt-parent = <&r_pio>; |
| interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ |
| interrupt-names = "host-wake"; |
| }; |
| }; |
| |
| &ohci0 { |
| status = "okay"; |
| }; |
| |
| &ohci1 { |
| status = "okay"; |
| }; |
| |
| &r_ir { |
| status = "okay"; |
| }; |
| |
| &r_rsb { |
| status = "okay"; |
| |
| axp803: pmic@3a3 { |
| compatible = "x-powers,axp803"; |
| reg = <0x3a3>; |
| interrupt-parent = <&r_intc>; |
| interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ |
| }; |
| }; |
| |
| #include "axp803.dtsi" |
| |
| &ac_power_supply { |
| status = "okay"; |
| }; |
| |
| &battery_power_supply { |
| status = "okay"; |
| }; |
| |
| ®_aldo1 { |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| regulator-name = "afvcc-csi"; |
| }; |
| |
| ®_aldo2 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vcc-pl"; |
| }; |
| |
| ®_aldo3 { |
| regulator-always-on; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-name = "vcc-pll-avcc"; |
| }; |
| |
| ®_dcdc1 { |
| regulator-always-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vcc-3v3"; |
| }; |
| |
| ®_dcdc2 { |
| regulator-always-on; |
| regulator-min-microvolt = <1040000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-name = "vdd-cpux"; |
| }; |
| |
| /* DCDC3 is polyphased with DCDC2 */ |
| |
| ®_dcdc5 { |
| regulator-always-on; |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-name = "vcc-dram"; |
| }; |
| |
| ®_dcdc6 { |
| regulator-always-on; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-name = "vdd-sys"; |
| }; |
| |
| ®_dldo1 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vcc-hdmi-dsi"; |
| }; |
| |
| ®_dldo2 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vcc-wifi"; |
| }; |
| |
| ®_dldo3 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "avdd-csi"; |
| }; |
| |
| ®_dldo4 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vcc-wifi-io"; |
| }; |
| |
| ®_drivevbus { |
| regulator-name = "usb0-vbus"; |
| status = "okay"; |
| }; |
| |
| ®_eldo1 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-name = "cpvdd"; |
| }; |
| |
| ®_eldo3 { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-name = "dvdd-csi"; |
| }; |
| |
| ®_fldo1 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-name = "vcc-1v2-hsic"; |
| }; |
| |
| /* |
| * The A64 chip cannot work without this regulator off, although |
| * it seems to be only driving the AR100 core. |
| * Maybe we don't still know well about CPUs domain. |
| */ |
| ®_fldo2 { |
| regulator-always-on; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-name = "vdd-cpus"; |
| }; |
| |
| ®_rtc_ldo { |
| regulator-name = "vcc-rtc"; |
| }; |
| |
| &simplefb_hdmi { |
| vcc-hdmi-supply = <®_dldo1>; |
| }; |
| |
| &sound { |
| status = "okay"; |
| simple-audio-card,widgets = "Headphone", "Headphone Jack", |
| "Microphone", "Microphone Jack", |
| "Microphone", "Onboard Microphone"; |
| simple-audio-card,routing = |
| "Left DAC", "DACL", |
| "Right DAC", "DACR", |
| "ADCL", "Left ADC", |
| "ADCR", "Right ADC", |
| "Headphone Jack", "HP", |
| "MIC2", "Microphone Jack", |
| "Onboard Microphone", "MBIAS", |
| "MIC1", "Onboard Microphone"; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| |
| spi-flash@0 { |
| compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <80000000>; |
| m25p,fast-read; |
| status = "okay"; |
| }; |
| }; |
| |
| /* On debug connector */ |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pb_pins>; |
| status = "okay"; |
| }; |
| |
| /* Bluetooth */ |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; |
| uart-has-rtscts; |
| status = "okay"; |
| |
| bluetooth { |
| compatible = "brcm,bcm43438-bt"; |
| max-speed = <1500000>; |
| clocks = <&rtc 1>; |
| clock-names = "lpo"; |
| vbat-supply = <®_dldo2>; |
| vddio-supply = <®_dldo4>; |
| device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ |
| host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ |
| shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ |
| }; |
| }; |
| |
| /* On Pi-2 connector, RTS/CTS optional */ |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_pins>; |
| status = "disabled"; |
| }; |
| |
| /* On Pi-2 connector, RTS/CTS optional */ |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_pins>; |
| status = "disabled"; |
| }; |
| |
| /* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */ |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart4_pins>; |
| status = "disabled"; |
| }; |
| |
| &usb_otg { |
| dr_mode = "otg"; |
| status = "okay"; |
| }; |
| |
| &usbphy { |
| usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ |
| usb0_vbus-supply = <®_drivevbus>; |
| usb1_vbus-supply = <®_usb1_vbus>; |
| status = "okay"; |
| }; |