| /* SPDX-License-Identifier: GPL-2.0-only |
| * |
| * Copyright (C) 2020-21 Intel Corporation. |
| */ |
| |
| #ifndef IOSM_IPC_PCIE_H |
| #define IOSM_IPC_PCIE_H |
| |
| #include <linux/device.h> |
| #include <linux/pci.h> |
| #include <linux/skbuff.h> |
| |
| #include "iosm_ipc_irq.h" |
| |
| /* Device ID */ |
| #define INTEL_CP_DEVICE_7560_ID 0x7560 |
| #define INTEL_CP_DEVICE_7360_ID 0x7360 |
| |
| /* Define for BAR area usage */ |
| #define IPC_DOORBELL_BAR0 0 |
| #define IPC_SCRATCHPAD_BAR2 2 |
| |
| /* Defines for DOORBELL registers information */ |
| #define IPC_DOORBELL_CH_OFFSET BIT(5) |
| #define IPC_WRITE_PTR_REG_0 BIT(4) |
| #define IPC_CAPTURE_PTR_REG_0 BIT(3) |
| |
| /* Number of MSI used for IPC */ |
| #define IPC_MSI_VECTORS 1 |
| |
| /* Total number of Maximum IPC IRQ vectors used for IPC */ |
| #define IPC_IRQ_VECTORS IPC_MSI_VECTORS |
| |
| /** |
| * enum ipc_pcie_sleep_state - Enum type to different sleep state transitions |
| * @IPC_PCIE_D0L12: Put the sleep state in D0L12 |
| * @IPC_PCIE_D3L2: Put the sleep state in D3L2 |
| */ |
| enum ipc_pcie_sleep_state { |
| IPC_PCIE_D0L12, |
| IPC_PCIE_D3L2, |
| }; |
| |
| /** |
| * struct iosm_pcie - IPC_PCIE struct. |
| * @pci: Address of the device description |
| * @dev: Pointer to generic device structure |
| * @ipc_regs: Remapped CP doorbell address of the irq register |
| * set, to fire the doorbell irq. |
| * @scratchpad: Remapped CP scratchpad address, to send the |
| * configuration. tuple and the IPC descriptors |
| * to CP in the ROM phase. The config tuple |
| * information are saved on the MSI scratchpad. |
| * @imem: Pointer to imem data struct |
| * @ipc_regs_bar_nr: BAR number to be used for IPC doorbell |
| * @scratchpad_bar_nr: BAR number to be used for Scratchpad |
| * @nvec: number of requested irq vectors |
| * @doorbell_reg_offset: doorbell_reg_offset |
| * @doorbell_write: doorbell write register |
| * @doorbell_capture: doorbell capture resgister |
| * @suspend: S2IDLE sleep/active |
| * @d3l2_support: Read WWAN RTD3 BIOS setting for D3L2 support |
| */ |
| struct iosm_pcie { |
| struct pci_dev *pci; |
| struct device *dev; |
| void __iomem *ipc_regs; |
| void __iomem *scratchpad; |
| struct iosm_imem *imem; |
| int ipc_regs_bar_nr; |
| int scratchpad_bar_nr; |
| int nvec; |
| u32 doorbell_reg_offset; |
| u32 doorbell_write; |
| u32 doorbell_capture; |
| unsigned long suspend; |
| enum ipc_pcie_sleep_state d3l2_support; |
| }; |
| |
| /** |
| * struct ipc_skb_cb - Struct definition of the socket buffer which is mapped to |
| * the cb field of sbk |
| * @mapping: Store physical or IOVA mapped address of skb virtual add. |
| * @direction: DMA direction |
| * @len: Length of the DMA mapped region |
| * @op_type: Expected values are defined about enum ipc_ul_usr_op. |
| */ |
| struct ipc_skb_cb { |
| dma_addr_t mapping; |
| int direction; |
| int len; |
| u8 op_type; |
| }; |
| |
| /** |
| * enum ipc_ul_usr_op - Control operation to execute the right action on |
| * the user interface. |
| * @UL_USR_OP_BLOCKED: The uplink app was blocked until CP confirms that the |
| * uplink buffer was consumed triggered by the IRQ. |
| * @UL_MUX_OP_ADB: In MUX mode the UL ADB shall be addedd to the free list. |
| * @UL_DEFAULT: SKB in non muxing mode |
| */ |
| enum ipc_ul_usr_op { |
| UL_USR_OP_BLOCKED, |
| UL_MUX_OP_ADB, |
| UL_DEFAULT, |
| }; |
| |
| /** |
| * ipc_pcie_addr_map - Maps the kernel's virtual address to either IOVA |
| * address space or Physical address space, the mapping is |
| * stored in the skb's cb. |
| * @ipc_pcie: Pointer to struct iosm_pcie |
| * @data: Skb mem containing data |
| * @size: Data size |
| * @mapping: Dma mapping address |
| * @direction: Data direction |
| * |
| * Returns: 0 on success and failure value on error |
| */ |
| int ipc_pcie_addr_map(struct iosm_pcie *ipc_pcie, unsigned char *data, |
| size_t size, dma_addr_t *mapping, int direction); |
| |
| /** |
| * ipc_pcie_addr_unmap - Unmaps the skb memory region from IOVA address space |
| * @ipc_pcie: Pointer to struct iosm_pcie |
| * @size: Data size |
| * @mapping: Dma mapping address |
| * @direction: Data direction |
| */ |
| void ipc_pcie_addr_unmap(struct iosm_pcie *ipc_pcie, size_t size, |
| dma_addr_t mapping, int direction); |
| |
| /** |
| * ipc_pcie_alloc_skb - Allocate an uplink SKB for the given size. |
| * @ipc_pcie: Pointer to struct iosm_pcie |
| * @size: Size of the SKB required. |
| * @flags: Allocation flags |
| * @mapping: Copies either mapped IOVA add. or converted Phy address |
| * @direction: DMA data direction |
| * @headroom: Header data offset |
| * |
| * Returns: Pointer to ipc_skb on Success, NULL on failure. |
| */ |
| struct sk_buff *ipc_pcie_alloc_skb(struct iosm_pcie *ipc_pcie, size_t size, |
| gfp_t flags, dma_addr_t *mapping, |
| int direction, size_t headroom); |
| |
| /** |
| * ipc_pcie_alloc_local_skb - Allocate a local SKB for the given size. |
| * @ipc_pcie: Pointer to struct iosm_pcie |
| * @flags: Allocation flags |
| * @size: Size of the SKB required. |
| * |
| * Returns: Pointer to ipc_skb on Success, NULL on failure. |
| */ |
| struct sk_buff *ipc_pcie_alloc_local_skb(struct iosm_pcie *ipc_pcie, |
| gfp_t flags, size_t size); |
| |
| /** |
| * ipc_pcie_kfree_skb - Free skb allocated by ipc_pcie_alloc_*_skb(). |
| * @ipc_pcie: Pointer to struct iosm_pcie |
| * @skb: Pointer to the skb |
| */ |
| void ipc_pcie_kfree_skb(struct iosm_pcie *ipc_pcie, struct sk_buff *skb); |
| |
| /** |
| * ipc_pcie_check_data_link_active - Check Data Link Layer Active |
| * @ipc_pcie: Pointer to struct iosm_pcie |
| * |
| * Returns: true if active, otherwise false |
| */ |
| bool ipc_pcie_check_data_link_active(struct iosm_pcie *ipc_pcie); |
| |
| /** |
| * ipc_pcie_suspend - Callback invoked by pm_runtime_suspend. It decrements |
| * the device's usage count then, carry out a suspend, |
| * either synchronous or asynchronous. |
| * @ipc_pcie: Pointer to struct iosm_pcie |
| * |
| * Returns: 0 on success and failure value on error |
| */ |
| int ipc_pcie_suspend(struct iosm_pcie *ipc_pcie); |
| |
| /** |
| * ipc_pcie_resume - Callback invoked by pm_runtime_resume. It increments |
| * the device's usage count then, carry out a resume, |
| * either synchronous or asynchronous. |
| * @ipc_pcie: Pointer to struct iosm_pcie |
| * |
| * Returns: 0 on success and failure value on error |
| */ |
| int ipc_pcie_resume(struct iosm_pcie *ipc_pcie); |
| |
| /** |
| * ipc_pcie_check_aspm_enabled - Check if ASPM L1 is already enabled |
| * @ipc_pcie: Pointer to struct iosm_pcie |
| * @parent: True if checking ASPM L1 for parent else false |
| * |
| * Returns: true if ASPM is already enabled else false |
| */ |
| bool ipc_pcie_check_aspm_enabled(struct iosm_pcie *ipc_pcie, |
| bool parent); |
| /** |
| * ipc_pcie_config_aspm - Configure ASPM L1 |
| * @ipc_pcie: Pointer to struct iosm_pcie |
| */ |
| void ipc_pcie_config_aspm(struct iosm_pcie *ipc_pcie); |
| |
| #endif |
