| /* |
| * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/ioport.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/spi/spi.h> |
| #include <linux/workqueue.h> |
| #include <linux/errno.h> |
| #include <linux/delay.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/hardware.h> |
| #include <asm/delay.h> |
| #include <asm/dma.h> |
| |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/pxa-regs.h> |
| #include <asm/arch/pxa2xx_spi.h> |
| |
| MODULE_AUTHOR("Stephen Street"); |
| MODULE_DESCRIPTION("PXA2xx SSP SPI Contoller"); |
| MODULE_LICENSE("GPL"); |
| |
| #define MAX_BUSES 3 |
| |
| #define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) |
| #define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) |
| #define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0) |
| |
| #define DEFINE_SSP_REG(reg, off) \ |
| static inline u32 read_##reg(void *p) { return __raw_readl(p + (off)); } \ |
| static inline void write_##reg(u32 v, void *p) { __raw_writel(v, p + (off)); } |
| |
| DEFINE_SSP_REG(SSCR0, 0x00) |
| DEFINE_SSP_REG(SSCR1, 0x04) |
| DEFINE_SSP_REG(SSSR, 0x08) |
| DEFINE_SSP_REG(SSITR, 0x0c) |
| DEFINE_SSP_REG(SSDR, 0x10) |
| DEFINE_SSP_REG(SSTO, 0x28) |
| DEFINE_SSP_REG(SSPSP, 0x2c) |
| |
| #define START_STATE ((void*)0) |
| #define RUNNING_STATE ((void*)1) |
| #define DONE_STATE ((void*)2) |
| #define ERROR_STATE ((void*)-1) |
| |
| #define QUEUE_RUNNING 0 |
| #define QUEUE_STOPPED 1 |
| |
| struct driver_data { |
| /* Driver model hookup */ |
| struct platform_device *pdev; |
| |
| /* SPI framework hookup */ |
| enum pxa_ssp_type ssp_type; |
| struct spi_master *master; |
| |
| /* PXA hookup */ |
| struct pxa2xx_spi_master *master_info; |
| |
| /* DMA setup stuff */ |
| int rx_channel; |
| int tx_channel; |
| u32 *null_dma_buf; |
| |
| /* SSP register addresses */ |
| void *ioaddr; |
| u32 ssdr_physical; |
| |
| /* SSP masks*/ |
| u32 dma_cr1; |
| u32 int_cr1; |
| u32 clear_sr; |
| u32 mask_sr; |
| |
| /* Driver message queue */ |
| struct workqueue_struct *workqueue; |
| struct work_struct pump_messages; |
| spinlock_t lock; |
| struct list_head queue; |
| int busy; |
| int run; |
| |
| /* Message Transfer pump */ |
| struct tasklet_struct pump_transfers; |
| |
| /* Current message transfer state info */ |
| struct spi_message* cur_msg; |
| struct spi_transfer* cur_transfer; |
| struct chip_data *cur_chip; |
| size_t len; |
| void *tx; |
| void *tx_end; |
| void *rx; |
| void *rx_end; |
| int dma_mapped; |
| dma_addr_t rx_dma; |
| dma_addr_t tx_dma; |
| size_t rx_map_len; |
| size_t tx_map_len; |
| u8 n_bytes; |
| u32 dma_width; |
| int cs_change; |
| void (*write)(struct driver_data *drv_data); |
| void (*read)(struct driver_data *drv_data); |
| irqreturn_t (*transfer_handler)(struct driver_data *drv_data); |
| void (*cs_control)(u32 command); |
| }; |
| |
| struct chip_data { |
| u32 cr0; |
| u32 cr1; |
| u32 to; |
| u32 psp; |
| u32 timeout; |
| u8 n_bytes; |
| u32 dma_width; |
| u32 dma_burst_size; |
| u32 threshold; |
| u32 dma_threshold; |
| u8 enable_dma; |
| u8 bits_per_word; |
| u32 speed_hz; |
| void (*write)(struct driver_data *drv_data); |
| void (*read)(struct driver_data *drv_data); |
| void (*cs_control)(u32 command); |
| }; |
| |
| static void pump_messages(void *data); |
| |
| static int flush(struct driver_data *drv_data) |
| { |
| unsigned long limit = loops_per_jiffy << 1; |
| |
| void *reg = drv_data->ioaddr; |
| |
| do { |
| while (read_SSSR(reg) & SSSR_RNE) { |
| read_SSDR(reg); |
| } |
| } while ((read_SSSR(reg) & SSSR_BSY) && limit--); |
| write_SSSR(SSSR_ROR, reg); |
| |
| return limit; |
| } |
| |
| static void restore_state(struct driver_data *drv_data) |
| { |
| void *reg = drv_data->ioaddr; |
| |
| /* Clear status and disable clock */ |
| write_SSSR(drv_data->clear_sr, reg); |
| write_SSCR0(drv_data->cur_chip->cr0 & ~SSCR0_SSE, reg); |
| |
| /* Load the registers */ |
| write_SSCR1(drv_data->cur_chip->cr1, reg); |
| write_SSCR0(drv_data->cur_chip->cr0, reg); |
| if (drv_data->ssp_type != PXA25x_SSP) { |
| write_SSTO(0, reg); |
| write_SSPSP(drv_data->cur_chip->psp, reg); |
| } |
| } |
| |
| static void null_cs_control(u32 command) |
| { |
| } |
| |
| static void null_writer(struct driver_data *drv_data) |
| { |
| void *reg = drv_data->ioaddr; |
| u8 n_bytes = drv_data->n_bytes; |
| |
| while ((read_SSSR(reg) & SSSR_TNF) |
| && (drv_data->tx < drv_data->tx_end)) { |
| write_SSDR(0, reg); |
| drv_data->tx += n_bytes; |
| } |
| } |
| |
| static void null_reader(struct driver_data *drv_data) |
| { |
| void *reg = drv_data->ioaddr; |
| u8 n_bytes = drv_data->n_bytes; |
| |
| while ((read_SSSR(reg) & SSSR_RNE) |
| && (drv_data->rx < drv_data->rx_end)) { |
| read_SSDR(reg); |
| drv_data->rx += n_bytes; |
| } |
| } |
| |
| static void u8_writer(struct driver_data *drv_data) |
| { |
| void *reg = drv_data->ioaddr; |
| |
| while ((read_SSSR(reg) & SSSR_TNF) |
| && (drv_data->tx < drv_data->tx_end)) { |
| write_SSDR(*(u8 *)(drv_data->tx), reg); |
| ++drv_data->tx; |
| } |
| } |
| |
| static void u8_reader(struct driver_data *drv_data) |
| { |
| void *reg = drv_data->ioaddr; |
| |
| while ((read_SSSR(reg) & SSSR_RNE) |
| && (drv_data->rx < drv_data->rx_end)) { |
| *(u8 *)(drv_data->rx) = read_SSDR(reg); |
| ++drv_data->rx; |
| } |
| } |
| |
| static void u16_writer(struct driver_data *drv_data) |
| { |
| void *reg = drv_data->ioaddr; |
| |
| while ((read_SSSR(reg) & SSSR_TNF) |
| && (drv_data->tx < drv_data->tx_end)) { |
| write_SSDR(*(u16 *)(drv_data->tx), reg); |
| drv_data->tx += 2; |
| } |
| } |
| |
| static void u16_reader(struct driver_data *drv_data) |
| { |
| void *reg = drv_data->ioaddr; |
| |
| while ((read_SSSR(reg) & SSSR_RNE) |
| && (drv_data->rx < drv_data->rx_end)) { |
| *(u16 *)(drv_data->rx) = read_SSDR(reg); |
| drv_data->rx += 2; |
| } |
| } |
| static void u32_writer(struct driver_data *drv_data) |
| { |
| void *reg = drv_data->ioaddr; |
| |
| while ((read_SSSR(reg) & SSSR_TNF) |
| && (drv_data->tx < drv_data->tx_end)) { |
| write_SSDR(*(u32 *)(drv_data->tx), reg); |
| drv_data->tx += 4; |
| } |
| } |
| |
| static void u32_reader(struct driver_data *drv_data) |
| { |
| void *reg = drv_data->ioaddr; |
| |
| while ((read_SSSR(reg) & SSSR_RNE) |
| && (drv_data->rx < drv_data->rx_end)) { |
| *(u32 *)(drv_data->rx) = read_SSDR(reg); |
| drv_data->rx += 4; |
| } |
| } |
| |
| static void *next_transfer(struct driver_data *drv_data) |
| { |
| struct spi_message *msg = drv_data->cur_msg; |
| struct spi_transfer *trans = drv_data->cur_transfer; |
| |
| /* Move to next transfer */ |
| if (trans->transfer_list.next != &msg->transfers) { |
| drv_data->cur_transfer = |
| list_entry(trans->transfer_list.next, |
| struct spi_transfer, |
| transfer_list); |
| return RUNNING_STATE; |
| } else |
| return DONE_STATE; |
| } |
| |
| static int map_dma_buffers(struct driver_data *drv_data) |
| { |
| struct spi_message *msg = drv_data->cur_msg; |
| struct device *dev = &msg->spi->dev; |
| |
| if (!drv_data->cur_chip->enable_dma) |
| return 0; |
| |
| if (msg->is_dma_mapped) |
| return drv_data->rx_dma && drv_data->tx_dma; |
| |
| if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx)) |
| return 0; |
| |
| /* Modify setup if rx buffer is null */ |
| if (drv_data->rx == NULL) { |
| *drv_data->null_dma_buf = 0; |
| drv_data->rx = drv_data->null_dma_buf; |
| drv_data->rx_map_len = 4; |
| } else |
| drv_data->rx_map_len = drv_data->len; |
| |
| |
| /* Modify setup if tx buffer is null */ |
| if (drv_data->tx == NULL) { |
| *drv_data->null_dma_buf = 0; |
| drv_data->tx = drv_data->null_dma_buf; |
| drv_data->tx_map_len = 4; |
| } else |
| drv_data->tx_map_len = drv_data->len; |
| |
| /* Stream map the rx buffer */ |
| drv_data->rx_dma = dma_map_single(dev, drv_data->rx, |
| drv_data->rx_map_len, |
| DMA_FROM_DEVICE); |
| if (dma_mapping_error(drv_data->rx_dma)) |
| return 0; |
| |
| /* Stream map the tx buffer */ |
| drv_data->tx_dma = dma_map_single(dev, drv_data->tx, |
| drv_data->tx_map_len, |
| DMA_TO_DEVICE); |
| |
| if (dma_mapping_error(drv_data->tx_dma)) { |
| dma_unmap_single(dev, drv_data->rx_dma, |
| drv_data->rx_map_len, DMA_FROM_DEVICE); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static void unmap_dma_buffers(struct driver_data *drv_data) |
| { |
| struct device *dev; |
| |
| if (!drv_data->dma_mapped) |
| return; |
| |
| if (!drv_data->cur_msg->is_dma_mapped) { |
| dev = &drv_data->cur_msg->spi->dev; |
| dma_unmap_single(dev, drv_data->rx_dma, |
| drv_data->rx_map_len, DMA_FROM_DEVICE); |
| dma_unmap_single(dev, drv_data->tx_dma, |
| drv_data->tx_map_len, DMA_TO_DEVICE); |
| } |
| |
| drv_data->dma_mapped = 0; |
| } |
| |
| /* caller already set message->status; dma and pio irqs are blocked */ |
| static void giveback(struct spi_message *message, struct driver_data *drv_data) |
| { |
| struct spi_transfer* last_transfer; |
| |
| last_transfer = list_entry(message->transfers.prev, |
| struct spi_transfer, |
| transfer_list); |
| |
| if (!last_transfer->cs_change) |
| drv_data->cs_control(PXA2XX_CS_DEASSERT); |
| |
| message->state = NULL; |
| if (message->complete) |
| message->complete(message->context); |
| |
| drv_data->cur_msg = NULL; |
| drv_data->cur_transfer = NULL; |
| drv_data->cur_chip = NULL; |
| queue_work(drv_data->workqueue, &drv_data->pump_messages); |
| } |
| |
| static int wait_ssp_rx_stall(void *ioaddr) |
| { |
| unsigned long limit = loops_per_jiffy << 1; |
| |
| while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--) |
| cpu_relax(); |
| |
| return limit; |
| } |
| |
| static int wait_dma_channel_stop(int channel) |
| { |
| unsigned long limit = loops_per_jiffy << 1; |
| |
| while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--) |
| cpu_relax(); |
| |
| return limit; |
| } |
| |
| static void dma_handler(int channel, void *data, struct pt_regs *regs) |
| { |
| struct driver_data *drv_data = data; |
| struct spi_message *msg = drv_data->cur_msg; |
| void *reg = drv_data->ioaddr; |
| u32 irq_status = DCSR(channel) & DMA_INT_MASK; |
| u32 trailing_sssr = 0; |
| |
| if (irq_status & DCSR_BUSERR) { |
| |
| /* Disable interrupts, clear status and reset DMA */ |
| if (drv_data->ssp_type != PXA25x_SSP) |
| write_SSTO(0, reg); |
| write_SSSR(drv_data->clear_sr, reg); |
| write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); |
| DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; |
| DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; |
| |
| if (flush(drv_data) == 0) |
| dev_err(&drv_data->pdev->dev, |
| "dma_handler: flush fail\n"); |
| |
| unmap_dma_buffers(drv_data); |
| |
| if (channel == drv_data->tx_channel) |
| dev_err(&drv_data->pdev->dev, |
| "dma_handler: bad bus address on " |
| "tx channel %d, source %x target = %x\n", |
| channel, DSADR(channel), DTADR(channel)); |
| else |
| dev_err(&drv_data->pdev->dev, |
| "dma_handler: bad bus address on " |
| "rx channel %d, source %x target = %x\n", |
| channel, DSADR(channel), DTADR(channel)); |
| |
| msg->state = ERROR_STATE; |
| tasklet_schedule(&drv_data->pump_transfers); |
| } |
| |
| /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */ |
| if ((drv_data->ssp_type == PXA25x_SSP) |
| && (channel == drv_data->tx_channel) |
| && (irq_status & DCSR_ENDINTR)) { |
| |
| /* Wait for rx to stall */ |
| if (wait_ssp_rx_stall(drv_data->ioaddr) == 0) |
| dev_err(&drv_data->pdev->dev, |
| "dma_handler: ssp rx stall failed\n"); |
| |
| /* Clear and disable interrupts on SSP and DMA channels*/ |
| write_SSSR(drv_data->clear_sr, reg); |
| write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); |
| DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; |
| DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; |
| if (wait_dma_channel_stop(drv_data->rx_channel) == 0) |
| dev_err(&drv_data->pdev->dev, |
| "dma_handler: dma rx channel stop failed\n"); |
| |
| unmap_dma_buffers(drv_data); |
| |
| /* Read trailing bytes */ |
| /* Calculate number of trailing bytes, read them */ |
| trailing_sssr = read_SSSR(reg); |
| if ((trailing_sssr & 0xf008) != 0xf000) { |
| drv_data->rx = drv_data->rx_end - |
| (((trailing_sssr >> 12) & 0x0f) + 1); |
| drv_data->read(drv_data); |
| } |
| msg->actual_length += drv_data->len; |
| |
| /* Release chip select if requested, transfer delays are |
| * handled in pump_transfers */ |
| if (drv_data->cs_change) |
| drv_data->cs_control(PXA2XX_CS_DEASSERT); |
| |
| /* Move to next transfer */ |
| msg->state = next_transfer(drv_data); |
| |
| /* Schedule transfer tasklet */ |
| tasklet_schedule(&drv_data->pump_transfers); |
| } |
| } |
| |
| static irqreturn_t dma_transfer(struct driver_data *drv_data) |
| { |
| u32 irq_status; |
| u32 trailing_sssr = 0; |
| struct spi_message *msg = drv_data->cur_msg; |
| void *reg = drv_data->ioaddr; |
| |
| irq_status = read_SSSR(reg) & drv_data->mask_sr; |
| if (irq_status & SSSR_ROR) { |
| /* Clear and disable interrupts on SSP and DMA channels*/ |
| if (drv_data->ssp_type != PXA25x_SSP) |
| write_SSTO(0, reg); |
| write_SSSR(drv_data->clear_sr, reg); |
| write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); |
| DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; |
| DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; |
| unmap_dma_buffers(drv_data); |
| |
| if (flush(drv_data) == 0) |
| dev_err(&drv_data->pdev->dev, |
| "dma_transfer: flush fail\n"); |
| |
| dev_warn(&drv_data->pdev->dev, "dma_transfer: fifo overun\n"); |
| |
| drv_data->cur_msg->state = ERROR_STATE; |
| tasklet_schedule(&drv_data->pump_transfers); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Check for false positive timeout */ |
| if ((irq_status & SSSR_TINT) && DCSR(drv_data->tx_channel) & DCSR_RUN) { |
| write_SSSR(SSSR_TINT, reg); |
| return IRQ_HANDLED; |
| } |
| |
| if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) { |
| |
| /* Clear and disable interrupts on SSP and DMA channels*/ |
| if (drv_data->ssp_type != PXA25x_SSP) |
| write_SSTO(0, reg); |
| write_SSSR(drv_data->clear_sr, reg); |
| write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); |
| DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; |
| DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; |
| |
| if (wait_dma_channel_stop(drv_data->rx_channel) == 0) |
| dev_err(&drv_data->pdev->dev, |
| "dma_transfer: dma rx channel stop failed\n"); |
| |
| if (wait_ssp_rx_stall(drv_data->ioaddr) == 0) |
| dev_err(&drv_data->pdev->dev, |
| "dma_transfer: ssp rx stall failed\n"); |
| |
| unmap_dma_buffers(drv_data); |
| |
| /* Calculate number of trailing bytes, read them */ |
| trailing_sssr = read_SSSR(reg); |
| if ((trailing_sssr & 0xf008) != 0xf000) { |
| drv_data->rx = drv_data->rx_end - |
| (((trailing_sssr >> 12) & 0x0f) + 1); |
| drv_data->read(drv_data); |
| } |
| msg->actual_length += drv_data->len; |
| |
| /* Release chip select if requested, transfer delays are |
| * handled in pump_transfers */ |
| if (drv_data->cs_change) |
| drv_data->cs_control(PXA2XX_CS_DEASSERT); |
| |
| /* Move to next transfer */ |
| msg->state = next_transfer(drv_data); |
| |
| /* Schedule transfer tasklet */ |
| tasklet_schedule(&drv_data->pump_transfers); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Opps problem detected */ |
| return IRQ_NONE; |
| } |
| |
| static irqreturn_t interrupt_transfer(struct driver_data *drv_data) |
| { |
| u32 irq_status; |
| struct spi_message *msg = drv_data->cur_msg; |
| void *reg = drv_data->ioaddr; |
| irqreturn_t handled = IRQ_NONE; |
| unsigned long limit = loops_per_jiffy << 1; |
| |
| while ((irq_status = (read_SSSR(reg) & drv_data->mask_sr))) { |
| |
| if (irq_status & SSSR_ROR) { |
| |
| /* Clear and disable interrupts */ |
| if (drv_data->ssp_type != PXA25x_SSP) |
| write_SSTO(0, reg); |
| write_SSSR(drv_data->clear_sr, reg); |
| write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg); |
| |
| if (flush(drv_data) == 0) |
| dev_err(&drv_data->pdev->dev, |
| "interrupt_transfer: flush fail\n"); |
| |
| dev_warn(&drv_data->pdev->dev, |
| "interrupt_transfer: fifo overun\n"); |
| |
| msg->state = ERROR_STATE; |
| tasklet_schedule(&drv_data->pump_transfers); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Look for false positive timeout */ |
| if ((irq_status & SSSR_TINT) |
| && (drv_data->rx < drv_data->rx_end)) |
| write_SSSR(SSSR_TINT, reg); |
| |
| /* Pump data */ |
| drv_data->read(drv_data); |
| drv_data->write(drv_data); |
| |
| if (drv_data->tx == drv_data->tx_end) { |
| /* Disable tx interrupt */ |
| write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg); |
| |
| /* PXA25x_SSP has no timeout, read trailing bytes */ |
| if (drv_data->ssp_type == PXA25x_SSP) { |
| while ((read_SSSR(reg) & SSSR_BSY) && limit--) |
| drv_data->read(drv_data); |
| |
| if (limit == 0) |
| dev_err(&drv_data->pdev->dev, |
| "interrupt_transfer: " |
| "trailing byte read failed\n"); |
| } |
| } |
| |
| if ((irq_status & SSSR_TINT) |
| || (drv_data->rx == drv_data->rx_end)) { |
| |
| /* Clear timeout */ |
| if (drv_data->ssp_type != PXA25x_SSP) |
| write_SSTO(0, reg); |
| write_SSSR(drv_data->clear_sr, reg); |
| write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg); |
| |
| /* Update total byte transfered */ |
| msg->actual_length += drv_data->len; |
| |
| /* Release chip select if requested, transfer delays are |
| * handled in pump_transfers */ |
| if (drv_data->cs_change) |
| drv_data->cs_control(PXA2XX_CS_DEASSERT); |
| |
| /* Move to next transfer */ |
| msg->state = next_transfer(drv_data); |
| |
| /* Schedule transfer tasklet */ |
| tasklet_schedule(&drv_data->pump_transfers); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* We did something */ |
| handled = IRQ_HANDLED; |
| } |
| |
| return handled; |
| } |
| |
| static irqreturn_t ssp_int(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct driver_data *drv_data = (struct driver_data *)dev_id; |
| |
| if (!drv_data->cur_msg) { |
| dev_err(&drv_data->pdev->dev, "bad message state " |
| "in interrupt handler\n"); |
| /* Never fail */ |
| return IRQ_HANDLED; |
| } |
| |
| return drv_data->transfer_handler(drv_data); |
| } |
| |
| static void pump_transfers(unsigned long data) |
| { |
| struct driver_data *drv_data = (struct driver_data *)data; |
| struct spi_message *message = NULL; |
| struct spi_transfer *transfer = NULL; |
| struct spi_transfer *previous = NULL; |
| struct chip_data *chip = NULL; |
| void *reg = drv_data->ioaddr; |
| u32 clk_div = 0; |
| u8 bits = 0; |
| u32 speed = 0; |
| u32 cr0; |
| |
| /* Get current state information */ |
| message = drv_data->cur_msg; |
| transfer = drv_data->cur_transfer; |
| chip = drv_data->cur_chip; |
| |
| /* Handle for abort */ |
| if (message->state == ERROR_STATE) { |
| message->status = -EIO; |
| giveback(message, drv_data); |
| return; |
| } |
| |
| /* Handle end of message */ |
| if (message->state == DONE_STATE) { |
| message->status = 0; |
| giveback(message, drv_data); |
| return; |
| } |
| |
| /* Delay if requested at end of transfer*/ |
| if (message->state == RUNNING_STATE) { |
| previous = list_entry(transfer->transfer_list.prev, |
| struct spi_transfer, |
| transfer_list); |
| if (previous->delay_usecs) |
| udelay(previous->delay_usecs); |
| } |
| |
| /* Setup the transfer state based on the type of transfer */ |
| if (flush(drv_data) == 0) { |
| dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); |
| message->status = -EIO; |
| giveback(message, drv_data); |
| return; |
| } |
| drv_data->n_bytes = chip->n_bytes; |
| drv_data->dma_width = chip->dma_width; |
| drv_data->cs_control = chip->cs_control; |
| drv_data->tx = (void *)transfer->tx_buf; |
| drv_data->tx_end = drv_data->tx + transfer->len; |
| drv_data->rx = transfer->rx_buf; |
| drv_data->rx_end = drv_data->rx + transfer->len; |
| drv_data->rx_dma = transfer->rx_dma; |
| drv_data->tx_dma = transfer->tx_dma; |
| drv_data->len = transfer->len; |
| drv_data->write = drv_data->tx ? chip->write : null_writer; |
| drv_data->read = drv_data->rx ? chip->read : null_reader; |
| drv_data->cs_change = transfer->cs_change; |
| |
| /* Change speed and bit per word on a per transfer */ |
| if (transfer->speed_hz || transfer->bits_per_word) { |
| |
| /* Disable clock */ |
| write_SSCR0(chip->cr0 & ~SSCR0_SSE, reg); |
| cr0 = chip->cr0; |
| bits = chip->bits_per_word; |
| speed = chip->speed_hz; |
| |
| if (transfer->speed_hz) |
| speed = transfer->speed_hz; |
| |
| if (transfer->bits_per_word) |
| bits = transfer->bits_per_word; |
| |
| if (reg == SSP1_VIRT) |
| clk_div = SSP1_SerClkDiv(speed); |
| else if (reg == SSP2_VIRT) |
| clk_div = SSP2_SerClkDiv(speed); |
| else if (reg == SSP3_VIRT) |
| clk_div = SSP3_SerClkDiv(speed); |
| |
| if (bits <= 8) { |
| drv_data->n_bytes = 1; |
| drv_data->dma_width = DCMD_WIDTH1; |
| drv_data->read = drv_data->read != null_reader ? |
| u8_reader : null_reader; |
| drv_data->write = drv_data->write != null_writer ? |
| u8_writer : null_writer; |
| } else if (bits <= 16) { |
| drv_data->n_bytes = 2; |
| drv_data->dma_width = DCMD_WIDTH2; |
| drv_data->read = drv_data->read != null_reader ? |
| u16_reader : null_reader; |
| drv_data->write = drv_data->write != null_writer ? |
| u16_writer : null_writer; |
| } else if (bits <= 32) { |
| drv_data->n_bytes = 4; |
| drv_data->dma_width = DCMD_WIDTH4; |
| drv_data->read = drv_data->read != null_reader ? |
| u32_reader : null_reader; |
| drv_data->write = drv_data->write != null_writer ? |
| u32_writer : null_writer; |
| } |
| |
| cr0 = clk_div |
| | SSCR0_Motorola |
| | SSCR0_DataSize(bits & 0x0f) |
| | SSCR0_SSE |
| | (bits > 16 ? SSCR0_EDSS : 0); |
| |
| /* Start it back up */ |
| write_SSCR0(cr0, reg); |
| } |
| |
| message->state = RUNNING_STATE; |
| |
| /* Try to map dma buffer and do a dma transfer if successful */ |
| if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) { |
| |
| /* Ensure we have the correct interrupt handler */ |
| drv_data->transfer_handler = dma_transfer; |
| |
| /* Setup rx DMA Channel */ |
| DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; |
| DSADR(drv_data->rx_channel) = drv_data->ssdr_physical; |
| DTADR(drv_data->rx_channel) = drv_data->rx_dma; |
| if (drv_data->rx == drv_data->null_dma_buf) |
| /* No target address increment */ |
| DCMD(drv_data->rx_channel) = DCMD_FLOWSRC |
| | drv_data->dma_width |
| | chip->dma_burst_size |
| | drv_data->len; |
| else |
| DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR |
| | DCMD_FLOWSRC |
| | drv_data->dma_width |
| | chip->dma_burst_size |
| | drv_data->len; |
| |
| /* Setup tx DMA Channel */ |
| DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; |
| DSADR(drv_data->tx_channel) = drv_data->tx_dma; |
| DTADR(drv_data->tx_channel) = drv_data->ssdr_physical; |
| if (drv_data->tx == drv_data->null_dma_buf) |
| /* No source address increment */ |
| DCMD(drv_data->tx_channel) = DCMD_FLOWTRG |
| | drv_data->dma_width |
| | chip->dma_burst_size |
| | drv_data->len; |
| else |
| DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR |
| | DCMD_FLOWTRG |
| | drv_data->dma_width |
| | chip->dma_burst_size |
| | drv_data->len; |
| |
| /* Enable dma end irqs on SSP to detect end of transfer */ |
| if (drv_data->ssp_type == PXA25x_SSP) |
| DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN; |
| |
| /* Fix me, need to handle cs polarity */ |
| drv_data->cs_control(PXA2XX_CS_ASSERT); |
| |
| /* Go baby, go */ |
| write_SSSR(drv_data->clear_sr, reg); |
| DCSR(drv_data->rx_channel) |= DCSR_RUN; |
| DCSR(drv_data->tx_channel) |= DCSR_RUN; |
| if (drv_data->ssp_type != PXA25x_SSP) |
| write_SSTO(chip->timeout, reg); |
| write_SSCR1(chip->cr1 |
| | chip->dma_threshold |
| | drv_data->dma_cr1, |
| reg); |
| } else { |
| /* Ensure we have the correct interrupt handler */ |
| drv_data->transfer_handler = interrupt_transfer; |
| |
| /* Fix me, need to handle cs polarity */ |
| drv_data->cs_control(PXA2XX_CS_ASSERT); |
| |
| /* Go baby, go */ |
| write_SSSR(drv_data->clear_sr, reg); |
| if (drv_data->ssp_type != PXA25x_SSP) |
| write_SSTO(chip->timeout, reg); |
| write_SSCR1(chip->cr1 |
| | chip->threshold |
| | drv_data->int_cr1, |
| reg); |
| } |
| } |
| |
| static void pump_messages(void *data) |
| { |
| struct driver_data *drv_data = data; |
| unsigned long flags; |
| |
| /* Lock queue and check for queue work */ |
| spin_lock_irqsave(&drv_data->lock, flags); |
| if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { |
| drv_data->busy = 0; |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| return; |
| } |
| |
| /* Make sure we are not already running a message */ |
| if (drv_data->cur_msg) { |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| return; |
| } |
| |
| /* Extract head of queue */ |
| drv_data->cur_msg = list_entry(drv_data->queue.next, |
| struct spi_message, queue); |
| list_del_init(&drv_data->cur_msg->queue); |
| drv_data->busy = 1; |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| |
| /* Initial message state*/ |
| drv_data->cur_msg->state = START_STATE; |
| drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, |
| struct spi_transfer, |
| transfer_list); |
| |
| /* Setup the SSP using the per chip configuration */ |
| drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); |
| restore_state(drv_data); |
| |
| /* Mark as busy and launch transfers */ |
| tasklet_schedule(&drv_data->pump_transfers); |
| } |
| |
| static int transfer(struct spi_device *spi, struct spi_message *msg) |
| { |
| struct driver_data *drv_data = spi_master_get_devdata(spi->master); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&drv_data->lock, flags); |
| |
| if (drv_data->run == QUEUE_STOPPED) { |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| return -ESHUTDOWN; |
| } |
| |
| msg->actual_length = 0; |
| msg->status = -EINPROGRESS; |
| msg->state = START_STATE; |
| |
| list_add_tail(&msg->queue, &drv_data->queue); |
| |
| if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) |
| queue_work(drv_data->workqueue, &drv_data->pump_messages); |
| |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| |
| return 0; |
| } |
| |
| static int setup(struct spi_device *spi) |
| { |
| struct pxa2xx_spi_chip *chip_info = NULL; |
| struct chip_data *chip; |
| struct driver_data *drv_data = spi_master_get_devdata(spi->master); |
| unsigned int clk_div; |
| |
| if (!spi->bits_per_word) |
| spi->bits_per_word = 8; |
| |
| if (drv_data->ssp_type != PXA25x_SSP |
| && (spi->bits_per_word < 4 || spi->bits_per_word > 32)) |
| return -EINVAL; |
| else if (spi->bits_per_word < 4 || spi->bits_per_word > 16) |
| return -EINVAL; |
| |
| /* Only alloc (or use chip_info) on first setup */ |
| chip = spi_get_ctldata(spi); |
| if (chip == NULL) { |
| chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| chip->cs_control = null_cs_control; |
| chip->enable_dma = 0; |
| chip->timeout = 5; |
| chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1); |
| chip->dma_burst_size = drv_data->master_info->enable_dma ? |
| DCMD_BURST8 : 0; |
| |
| chip_info = spi->controller_data; |
| } |
| |
| /* chip_info isn't always needed */ |
| if (chip_info) { |
| if (chip_info->cs_control) |
| chip->cs_control = chip_info->cs_control; |
| |
| chip->timeout = (chip_info->timeout_microsecs * 10000) / 2712; |
| |
| chip->threshold = SSCR1_RxTresh(chip_info->rx_threshold) |
| | SSCR1_TxTresh(chip_info->tx_threshold); |
| |
| chip->enable_dma = chip_info->dma_burst_size != 0 |
| && drv_data->master_info->enable_dma; |
| chip->dma_threshold = 0; |
| |
| if (chip->enable_dma) { |
| if (chip_info->dma_burst_size <= 8) { |
| chip->dma_threshold = SSCR1_RxTresh(8) |
| | SSCR1_TxTresh(8); |
| chip->dma_burst_size = DCMD_BURST8; |
| } else if (chip_info->dma_burst_size <= 16) { |
| chip->dma_threshold = SSCR1_RxTresh(16) |
| | SSCR1_TxTresh(16); |
| chip->dma_burst_size = DCMD_BURST16; |
| } else { |
| chip->dma_threshold = SSCR1_RxTresh(32) |
| | SSCR1_TxTresh(32); |
| chip->dma_burst_size = DCMD_BURST32; |
| } |
| } |
| |
| |
| if (chip_info->enable_loopback) |
| chip->cr1 = SSCR1_LBM; |
| } |
| |
| if (drv_data->ioaddr == SSP1_VIRT) |
| clk_div = SSP1_SerClkDiv(spi->max_speed_hz); |
| else if (drv_data->ioaddr == SSP2_VIRT) |
| clk_div = SSP2_SerClkDiv(spi->max_speed_hz); |
| else if (drv_data->ioaddr == SSP3_VIRT) |
| clk_div = SSP3_SerClkDiv(spi->max_speed_hz); |
| else |
| return -ENODEV; |
| chip->speed_hz = spi->max_speed_hz; |
| |
| chip->cr0 = clk_div |
| | SSCR0_Motorola |
| | SSCR0_DataSize(spi->bits_per_word & 0x0f) |
| | SSCR0_SSE |
| | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0); |
| chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4) |
| | (((spi->mode & SPI_CPOL) != 0) << 3); |
| |
| /* NOTE: PXA25x_SSP _could_ use external clocking ... */ |
| if (drv_data->ssp_type != PXA25x_SSP) |
| dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n", |
| spi->bits_per_word, |
| (CLOCK_SPEED_HZ) |
| / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), |
| spi->mode & 0x3); |
| else |
| dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n", |
| spi->bits_per_word, |
| (CLOCK_SPEED_HZ/2) |
| / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), |
| spi->mode & 0x3); |
| |
| if (spi->bits_per_word <= 8) { |
| chip->n_bytes = 1; |
| chip->dma_width = DCMD_WIDTH1; |
| chip->read = u8_reader; |
| chip->write = u8_writer; |
| } else if (spi->bits_per_word <= 16) { |
| chip->n_bytes = 2; |
| chip->dma_width = DCMD_WIDTH2; |
| chip->read = u16_reader; |
| chip->write = u16_writer; |
| } else if (spi->bits_per_word <= 32) { |
| chip->cr0 |= SSCR0_EDSS; |
| chip->n_bytes = 4; |
| chip->dma_width = DCMD_WIDTH4; |
| chip->read = u32_reader; |
| chip->write = u32_writer; |
| } else { |
| dev_err(&spi->dev, "invalid wordsize\n"); |
| kfree(chip); |
| return -ENODEV; |
| } |
| chip->bits_per_word = spi->bits_per_word; |
| |
| spi_set_ctldata(spi, chip); |
| |
| return 0; |
| } |
| |
| static void cleanup(const struct spi_device *spi) |
| { |
| struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi); |
| |
| kfree(chip); |
| } |
| |
| static int init_queue(struct driver_data *drv_data) |
| { |
| INIT_LIST_HEAD(&drv_data->queue); |
| spin_lock_init(&drv_data->lock); |
| |
| drv_data->run = QUEUE_STOPPED; |
| drv_data->busy = 0; |
| |
| tasklet_init(&drv_data->pump_transfers, |
| pump_transfers, (unsigned long)drv_data); |
| |
| INIT_WORK(&drv_data->pump_messages, pump_messages, drv_data); |
| drv_data->workqueue = create_singlethread_workqueue( |
| drv_data->master->cdev.dev->bus_id); |
| if (drv_data->workqueue == NULL) |
| return -EBUSY; |
| |
| return 0; |
| } |
| |
| static int start_queue(struct driver_data *drv_data) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&drv_data->lock, flags); |
| |
| if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| return -EBUSY; |
| } |
| |
| drv_data->run = QUEUE_RUNNING; |
| drv_data->cur_msg = NULL; |
| drv_data->cur_transfer = NULL; |
| drv_data->cur_chip = NULL; |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| |
| queue_work(drv_data->workqueue, &drv_data->pump_messages); |
| |
| return 0; |
| } |
| |
| static int stop_queue(struct driver_data *drv_data) |
| { |
| unsigned long flags; |
| unsigned limit = 500; |
| int status = 0; |
| |
| spin_lock_irqsave(&drv_data->lock, flags); |
| |
| /* This is a bit lame, but is optimized for the common execution path. |
| * A wait_queue on the drv_data->busy could be used, but then the common |
| * execution path (pump_messages) would be required to call wake_up or |
| * friends on every SPI message. Do this instead */ |
| drv_data->run = QUEUE_STOPPED; |
| while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| msleep(10); |
| spin_lock_irqsave(&drv_data->lock, flags); |
| } |
| |
| if (!list_empty(&drv_data->queue) || drv_data->busy) |
| status = -EBUSY; |
| |
| spin_unlock_irqrestore(&drv_data->lock, flags); |
| |
| return status; |
| } |
| |
| static int destroy_queue(struct driver_data *drv_data) |
| { |
| int status; |
| |
| status = stop_queue(drv_data); |
| if (status != 0) |
| return status; |
| |
| destroy_workqueue(drv_data->workqueue); |
| |
| return 0; |
| } |
| |
| static int pxa2xx_spi_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct pxa2xx_spi_master *platform_info; |
| struct spi_master *master; |
| struct driver_data *drv_data = 0; |
| struct resource *memory_resource; |
| int irq; |
| int status = 0; |
| |
| platform_info = dev->platform_data; |
| |
| if (platform_info->ssp_type == SSP_UNDEFINED) { |
| dev_err(&pdev->dev, "undefined SSP\n"); |
| return -ENODEV; |
| } |
| |
| /* Allocate master with space for drv_data and null dma buffer */ |
| master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); |
| if (!master) { |
| dev_err(&pdev->dev, "can not alloc spi_master\n"); |
| return -ENOMEM; |
| } |
| drv_data = spi_master_get_devdata(master); |
| drv_data->master = master; |
| drv_data->master_info = platform_info; |
| drv_data->pdev = pdev; |
| |
| master->bus_num = pdev->id; |
| master->num_chipselect = platform_info->num_chipselect; |
| master->cleanup = cleanup; |
| master->setup = setup; |
| master->transfer = transfer; |
| |
| drv_data->ssp_type = platform_info->ssp_type; |
| drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data + |
| sizeof(struct driver_data)), 8); |
| |
| /* Setup register addresses */ |
| memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!memory_resource) { |
| dev_err(&pdev->dev, "memory resources not defined\n"); |
| status = -ENODEV; |
| goto out_error_master_alloc; |
| } |
| |
| drv_data->ioaddr = (void *)io_p2v(memory_resource->start); |
| drv_data->ssdr_physical = memory_resource->start + 0x00000010; |
| if (platform_info->ssp_type == PXA25x_SSP) { |
| drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE; |
| drv_data->dma_cr1 = 0; |
| drv_data->clear_sr = SSSR_ROR; |
| drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR; |
| } else { |
| drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE; |
| drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE; |
| drv_data->clear_sr = SSSR_ROR | SSSR_TINT; |
| drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR; |
| } |
| |
| /* Attach to IRQ */ |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "irq resource not defined\n"); |
| status = -ENODEV; |
| goto out_error_master_alloc; |
| } |
| |
| status = request_irq(irq, ssp_int, SA_INTERRUPT, dev->bus_id, drv_data); |
| if (status < 0) { |
| dev_err(&pdev->dev, "can not get IRQ\n"); |
| goto out_error_master_alloc; |
| } |
| |
| /* Setup DMA if requested */ |
| drv_data->tx_channel = -1; |
| drv_data->rx_channel = -1; |
| if (platform_info->enable_dma) { |
| |
| /* Get two DMA channels (rx and tx) */ |
| drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx", |
| DMA_PRIO_HIGH, |
| dma_handler, |
| drv_data); |
| if (drv_data->rx_channel < 0) { |
| dev_err(dev, "problem (%d) requesting rx channel\n", |
| drv_data->rx_channel); |
| status = -ENODEV; |
| goto out_error_irq_alloc; |
| } |
| drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx", |
| DMA_PRIO_MEDIUM, |
| dma_handler, |
| drv_data); |
| if (drv_data->tx_channel < 0) { |
| dev_err(dev, "problem (%d) requesting tx channel\n", |
| drv_data->tx_channel); |
| status = -ENODEV; |
| goto out_error_dma_alloc; |
| } |
| |
| if (drv_data->ioaddr == SSP1_VIRT) { |
| DRCMRRXSSDR = DRCMR_MAPVLD |
| | drv_data->rx_channel; |
| DRCMRTXSSDR = DRCMR_MAPVLD |
| | drv_data->tx_channel; |
| } else if (drv_data->ioaddr == SSP2_VIRT) { |
| DRCMRRXSS2DR = DRCMR_MAPVLD |
| | drv_data->rx_channel; |
| DRCMRTXSS2DR = DRCMR_MAPVLD |
| | drv_data->tx_channel; |
| } else if (drv_data->ioaddr == SSP3_VIRT) { |
| DRCMRRXSS3DR = DRCMR_MAPVLD |
| | drv_data->rx_channel; |
| DRCMRTXSS3DR = DRCMR_MAPVLD |
| | drv_data->tx_channel; |
| } else { |
| dev_err(dev, "bad SSP type\n"); |
| goto out_error_dma_alloc; |
| } |
| } |
| |
| /* Enable SOC clock */ |
| pxa_set_cken(platform_info->clock_enable, 1); |
| |
| /* Load default SSP configuration */ |
| write_SSCR0(0, drv_data->ioaddr); |
| write_SSCR1(SSCR1_RxTresh(4) | SSCR1_TxTresh(12), drv_data->ioaddr); |
| write_SSCR0(SSCR0_SerClkDiv(2) |
| | SSCR0_Motorola |
| | SSCR0_DataSize(8), |
| drv_data->ioaddr); |
| if (drv_data->ssp_type != PXA25x_SSP) |
| write_SSTO(0, drv_data->ioaddr); |
| write_SSPSP(0, drv_data->ioaddr); |
| |
| /* Initial and start queue */ |
| status = init_queue(drv_data); |
| if (status != 0) { |
| dev_err(&pdev->dev, "problem initializing queue\n"); |
| goto out_error_clock_enabled; |
| } |
| status = start_queue(drv_data); |
| if (status != 0) { |
| dev_err(&pdev->dev, "problem starting queue\n"); |
| goto out_error_clock_enabled; |
| } |
| |
| /* Register with the SPI framework */ |
| platform_set_drvdata(pdev, drv_data); |
| status = spi_register_master(master); |
| if (status != 0) { |
| dev_err(&pdev->dev, "problem registering spi master\n"); |
| goto out_error_queue_alloc; |
| } |
| |
| return status; |
| |
| out_error_queue_alloc: |
| destroy_queue(drv_data); |
| |
| out_error_clock_enabled: |
| pxa_set_cken(platform_info->clock_enable, 0); |
| |
| out_error_dma_alloc: |
| if (drv_data->tx_channel != -1) |
| pxa_free_dma(drv_data->tx_channel); |
| if (drv_data->rx_channel != -1) |
| pxa_free_dma(drv_data->rx_channel); |
| |
| out_error_irq_alloc: |
| free_irq(irq, drv_data); |
| |
| out_error_master_alloc: |
| spi_master_put(master); |
| return status; |
| } |
| |
| static int pxa2xx_spi_remove(struct platform_device *pdev) |
| { |
| struct driver_data *drv_data = platform_get_drvdata(pdev); |
| int irq; |
| int status = 0; |
| |
| if (!drv_data) |
| return 0; |
| |
| /* Remove the queue */ |
| status = destroy_queue(drv_data); |
| if (status != 0) |
| return status; |
| |
| /* Disable the SSP at the peripheral and SOC level */ |
| write_SSCR0(0, drv_data->ioaddr); |
| pxa_set_cken(drv_data->master_info->clock_enable, 0); |
| |
| /* Release DMA */ |
| if (drv_data->master_info->enable_dma) { |
| if (drv_data->ioaddr == SSP1_VIRT) { |
| DRCMRRXSSDR = 0; |
| DRCMRTXSSDR = 0; |
| } else if (drv_data->ioaddr == SSP2_VIRT) { |
| DRCMRRXSS2DR = 0; |
| DRCMRTXSS2DR = 0; |
| } else if (drv_data->ioaddr == SSP3_VIRT) { |
| DRCMRRXSS3DR = 0; |
| DRCMRTXSS3DR = 0; |
| } |
| pxa_free_dma(drv_data->tx_channel); |
| pxa_free_dma(drv_data->rx_channel); |
| } |
| |
| /* Release IRQ */ |
| irq = platform_get_irq(pdev, 0); |
| if (irq >= 0) |
| free_irq(irq, drv_data); |
| |
| /* Disconnect from the SPI framework */ |
| spi_unregister_master(drv_data->master); |
| |
| /* Prevent double remove */ |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| static void pxa2xx_spi_shutdown(struct platform_device *pdev) |
| { |
| int status = 0; |
| |
| if ((status = pxa2xx_spi_remove(pdev)) != 0) |
| dev_err(&pdev->dev, "shutdown failed with %d\n", status); |
| } |
| |
| #ifdef CONFIG_PM |
| static int suspend_devices(struct device *dev, void *pm_message) |
| { |
| pm_message_t *state = pm_message; |
| |
| if (dev->power.power_state.event != state->event) { |
| dev_warn(dev, "pm state does not match request\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| struct driver_data *drv_data = platform_get_drvdata(pdev); |
| int status = 0; |
| |
| /* Check all childern for current power state */ |
| if (device_for_each_child(&pdev->dev, &state, suspend_devices) != 0) { |
| dev_warn(&pdev->dev, "suspend aborted\n"); |
| return -1; |
| } |
| |
| status = stop_queue(drv_data); |
| if (status != 0) |
| return status; |
| write_SSCR0(0, drv_data->ioaddr); |
| pxa_set_cken(drv_data->master_info->clock_enable, 0); |
| |
| return 0; |
| } |
| |
| static int pxa2xx_spi_resume(struct platform_device *pdev) |
| { |
| struct driver_data *drv_data = platform_get_drvdata(pdev); |
| int status = 0; |
| |
| /* Enable the SSP clock */ |
| pxa_set_cken(drv_data->master_info->clock_enable, 1); |
| |
| /* Start the queue running */ |
| status = start_queue(drv_data); |
| if (status != 0) { |
| dev_err(&pdev->dev, "problem starting queue (%d)\n", status); |
| return status; |
| } |
| |
| return 0; |
| } |
| #else |
| #define pxa2xx_spi_suspend NULL |
| #define pxa2xx_spi_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| static struct platform_driver driver = { |
| .driver = { |
| .name = "pxa2xx-spi", |
| .bus = &platform_bus_type, |
| .owner = THIS_MODULE, |
| }, |
| .probe = pxa2xx_spi_probe, |
| .remove = __devexit_p(pxa2xx_spi_remove), |
| .shutdown = pxa2xx_spi_shutdown, |
| .suspend = pxa2xx_spi_suspend, |
| .resume = pxa2xx_spi_resume, |
| }; |
| |
| static int __init pxa2xx_spi_init(void) |
| { |
| platform_driver_register(&driver); |
| |
| return 0; |
| } |
| module_init(pxa2xx_spi_init); |
| |
| static void __exit pxa2xx_spi_exit(void) |
| { |
| platform_driver_unregister(&driver); |
| } |
| module_exit(pxa2xx_spi_exit); |