| /* |
| * pca9532.c - 16-bit Led dimmer |
| * |
| * Copyright (C) 2008 Riku Voipio |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/leds.h> |
| #include <linux/input.h> |
| #include <linux/mutex.h> |
| #include <linux/workqueue.h> |
| #include <linux/leds-pca9532.h> |
| |
| static const unsigned short normal_i2c[] = { /*0x60,*/ I2C_CLIENT_END}; |
| I2C_CLIENT_INSMOD_1(pca9532); |
| |
| #define PCA9532_REG_PSC(i) (0x2+(i)*2) |
| #define PCA9532_REG_PWM(i) (0x3+(i)*2) |
| #define PCA9532_REG_LS0 0x6 |
| #define LED_REG(led) ((led>>2)+PCA9532_REG_LS0) |
| #define LED_NUM(led) (led & 0x3) |
| |
| #define ldev_to_led(c) container_of(c, struct pca9532_led, ldev) |
| |
| struct pca9532_data { |
| struct i2c_client *client; |
| struct pca9532_led leds[16]; |
| struct mutex update_lock; |
| struct input_dev *idev; |
| struct work_struct work; |
| u8 pwm[2]; |
| u8 psc[2]; |
| }; |
| |
| static int pca9532_probe(struct i2c_client *client, |
| const struct i2c_device_id *id); |
| static int pca9532_remove(struct i2c_client *client); |
| |
| static const struct i2c_device_id pca9532_id[] = { |
| { "pca9532", 0 }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, pca9532_id); |
| |
| static struct i2c_driver pca9532_driver = { |
| .driver = { |
| .name = "pca9532", |
| }, |
| .probe = pca9532_probe, |
| .remove = pca9532_remove, |
| .id_table = pca9532_id, |
| }; |
| |
| /* We have two pwm/blinkers, but 16 possible leds to drive. Additionaly, |
| * the clever Thecus people are using one pwm to drive the beeper. So, |
| * as a compromise we average one pwm to the values requested by all |
| * leds that are not ON/OFF. |
| * */ |
| static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink, |
| enum led_brightness value) |
| { |
| int a = 0, b = 0, i = 0; |
| struct pca9532_data *data = i2c_get_clientdata(client); |
| for (i = 0; i < 16; i++) { |
| if (data->leds[i].type == PCA9532_TYPE_LED && |
| data->leds[i].state == PCA9532_PWM0+pwm) { |
| a++; |
| b += data->leds[i].ldev.brightness; |
| } |
| } |
| if (a == 0) { |
| dev_err(&client->dev, |
| "fear of division by zero %d/%d, wanted %d\n", |
| b, a, value); |
| return -EINVAL; |
| } |
| b = b/a; |
| if (b > 0xFF) |
| return -EINVAL; |
| data->pwm[pwm] = b; |
| data->psc[pwm] = blink; |
| return 0; |
| } |
| |
| static int pca9532_setpwm(struct i2c_client *client, int pwm) |
| { |
| struct pca9532_data *data = i2c_get_clientdata(client); |
| mutex_lock(&data->update_lock); |
| i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm), |
| data->pwm[pwm]); |
| i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm), |
| data->psc[pwm]); |
| mutex_unlock(&data->update_lock); |
| return 0; |
| } |
| |
| /* Set LED routing */ |
| static void pca9532_setled(struct pca9532_led *led) |
| { |
| struct i2c_client *client = led->client; |
| struct pca9532_data *data = i2c_get_clientdata(client); |
| char reg; |
| |
| mutex_lock(&data->update_lock); |
| reg = i2c_smbus_read_byte_data(client, LED_REG(led->id)); |
| /* zero led bits */ |
| reg = reg & ~(0x3<<LED_NUM(led->id)*2); |
| /* set the new value */ |
| reg = reg | (led->state << LED_NUM(led->id)*2); |
| i2c_smbus_write_byte_data(client, LED_REG(led->id), reg); |
| mutex_unlock(&data->update_lock); |
| } |
| |
| static void pca9532_set_brightness(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| int err = 0; |
| struct pca9532_led *led = ldev_to_led(led_cdev); |
| |
| if (value == LED_OFF) |
| led->state = PCA9532_OFF; |
| else if (value == LED_FULL) |
| led->state = PCA9532_ON; |
| else { |
| led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */ |
| err = pca9532_calcpwm(led->client, 0, 0, value); |
| if (err) |
| return; /* XXX: led api doesn't allow error code? */ |
| } |
| schedule_work(&led->work); |
| } |
| |
| static int pca9532_set_blink(struct led_classdev *led_cdev, |
| unsigned long *delay_on, unsigned long *delay_off) |
| { |
| struct pca9532_led *led = ldev_to_led(led_cdev); |
| struct i2c_client *client = led->client; |
| int psc; |
| int err = 0; |
| |
| if (*delay_on == 0 && *delay_off == 0) { |
| /* led subsystem ask us for a blink rate */ |
| *delay_on = 1000; |
| *delay_off = 1000; |
| } |
| if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6) |
| return -EINVAL; |
| |
| /* Thecus specific: only use PSC/PWM 0 */ |
| psc = (*delay_on * 152-1)/1000; |
| err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness); |
| if (err) |
| return err; |
| schedule_work(&led->work); |
| return 0; |
| } |
| |
| static int pca9532_event(struct input_dev *dev, unsigned int type, |
| unsigned int code, int value) |
| { |
| struct pca9532_data *data = input_get_drvdata(dev); |
| |
| if (type != EV_SND && (code != SND_BELL || code != SND_TONE)) |
| return -1; |
| |
| /* XXX: allow different kind of beeps with psc/pwm modifications */ |
| if (value > 1 && value < 32767) |
| data->pwm[1] = 127; |
| else |
| data->pwm[1] = 0; |
| |
| schedule_work(&data->work); |
| |
| return 0; |
| } |
| |
| static void pca9532_input_work(struct work_struct *work) |
| { |
| struct pca9532_data *data; |
| data = container_of(work, struct pca9532_data, work); |
| mutex_lock(&data->update_lock); |
| i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1), |
| data->pwm[1]); |
| mutex_unlock(&data->update_lock); |
| } |
| |
| static void pca9532_led_work(struct work_struct *work) |
| { |
| struct pca9532_led *led; |
| led = container_of(work, struct pca9532_led, work); |
| if (led->state == PCA9532_PWM0) |
| pca9532_setpwm(led->client, 0); |
| pca9532_setled(led); |
| } |
| |
| static int pca9532_configure(struct i2c_client *client, |
| struct pca9532_data *data, struct pca9532_platform_data *pdata) |
| { |
| int i, err = 0; |
| |
| for (i = 0; i < 2; i++) { |
| data->pwm[i] = pdata->pwm[i]; |
| data->psc[i] = pdata->psc[i]; |
| i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(i), |
| data->pwm[i]); |
| i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(i), |
| data->psc[i]); |
| } |
| |
| for (i = 0; i < 16; i++) { |
| struct pca9532_led *led = &data->leds[i]; |
| struct pca9532_led *pled = &pdata->leds[i]; |
| led->client = client; |
| led->id = i; |
| led->type = pled->type; |
| switch (led->type) { |
| case PCA9532_TYPE_NONE: |
| break; |
| case PCA9532_TYPE_LED: |
| led->state = pled->state; |
| led->name = pled->name; |
| led->ldev.name = led->name; |
| led->ldev.brightness = LED_OFF; |
| led->ldev.brightness_set = pca9532_set_brightness; |
| led->ldev.blink_set = pca9532_set_blink; |
| INIT_WORK(&led->work, pca9532_led_work); |
| err = led_classdev_register(&client->dev, &led->ldev); |
| if (err < 0) { |
| dev_err(&client->dev, |
| "couldn't register LED %s\n", |
| led->name); |
| goto exit; |
| } |
| pca9532_setled(led); |
| break; |
| case PCA9532_TYPE_N2100_BEEP: |
| BUG_ON(data->idev); |
| led->state = PCA9532_PWM1; |
| pca9532_setled(led); |
| data->idev = input_allocate_device(); |
| if (data->idev == NULL) { |
| err = -ENOMEM; |
| goto exit; |
| } |
| data->idev->name = pled->name; |
| data->idev->phys = "i2c/pca9532"; |
| data->idev->id.bustype = BUS_HOST; |
| data->idev->id.vendor = 0x001f; |
| data->idev->id.product = 0x0001; |
| data->idev->id.version = 0x0100; |
| data->idev->evbit[0] = BIT_MASK(EV_SND); |
| data->idev->sndbit[0] = BIT_MASK(SND_BELL) | |
| BIT_MASK(SND_TONE); |
| data->idev->event = pca9532_event; |
| input_set_drvdata(data->idev, data); |
| INIT_WORK(&data->work, pca9532_input_work); |
| err = input_register_device(data->idev); |
| if (err) { |
| input_free_device(data->idev); |
| cancel_work_sync(&data->work); |
| data->idev = NULL; |
| goto exit; |
| } |
| break; |
| } |
| } |
| return 0; |
| |
| exit: |
| if (i > 0) |
| for (i = i - 1; i >= 0; i--) |
| switch (data->leds[i].type) { |
| case PCA9532_TYPE_NONE: |
| break; |
| case PCA9532_TYPE_LED: |
| led_classdev_unregister(&data->leds[i].ldev); |
| cancel_work_sync(&data->leds[i].work); |
| break; |
| case PCA9532_TYPE_N2100_BEEP: |
| if (data->idev != NULL) { |
| input_unregister_device(data->idev); |
| input_free_device(data->idev); |
| cancel_work_sync(&data->work); |
| data->idev = NULL; |
| } |
| break; |
| } |
| |
| return err; |
| } |
| |
| static int pca9532_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct pca9532_data *data = i2c_get_clientdata(client); |
| struct pca9532_platform_data *pca9532_pdata = client->dev.platform_data; |
| int err; |
| |
| if (!pca9532_pdata) |
| return -EIO; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -EIO; |
| |
| data = kzalloc(sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| dev_info(&client->dev, "setting platform data\n"); |
| i2c_set_clientdata(client, data); |
| data->client = client; |
| mutex_init(&data->update_lock); |
| |
| err = pca9532_configure(client, data, pca9532_pdata); |
| if (err) { |
| kfree(data); |
| i2c_set_clientdata(client, NULL); |
| } |
| |
| return err; |
| } |
| |
| static int pca9532_remove(struct i2c_client *client) |
| { |
| struct pca9532_data *data = i2c_get_clientdata(client); |
| int i; |
| for (i = 0; i < 16; i++) |
| switch (data->leds[i].type) { |
| case PCA9532_TYPE_NONE: |
| break; |
| case PCA9532_TYPE_LED: |
| led_classdev_unregister(&data->leds[i].ldev); |
| cancel_work_sync(&data->leds[i].work); |
| break; |
| case PCA9532_TYPE_N2100_BEEP: |
| if (data->idev != NULL) { |
| input_unregister_device(data->idev); |
| input_free_device(data->idev); |
| cancel_work_sync(&data->work); |
| data->idev = NULL; |
| } |
| break; |
| } |
| |
| kfree(data); |
| i2c_set_clientdata(client, NULL); |
| return 0; |
| } |
| |
| static int __init pca9532_init(void) |
| { |
| return i2c_add_driver(&pca9532_driver); |
| } |
| |
| static void __exit pca9532_exit(void) |
| { |
| i2c_del_driver(&pca9532_driver); |
| } |
| |
| MODULE_AUTHOR("Riku Voipio"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("PCA 9532 LED dimmer"); |
| |
| module_init(pca9532_init); |
| module_exit(pca9532_exit); |
| |