| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * linux/arch/arm/plat-omap/ocpi.c |
| * |
| * Minimal OCP bus support for omap16xx |
| * |
| * Copyright (C) 2003 - 2005 Nokia Corporation |
| * Copyright (C) 2012 Texas Instruments, Inc. |
| * Written by Tony Lindgren <tony@atomide.com> |
| * |
| * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| |
| #include <mach/hardware.h> |
| |
| #include "common.h" |
| |
| #define OCPI_BASE 0xfffec320 |
| #define OCPI_FAULT (OCPI_BASE + 0x00) |
| #define OCPI_CMD_FAULT (OCPI_BASE + 0x04) |
| #define OCPI_SINT0 (OCPI_BASE + 0x08) |
| #define OCPI_TABORT (OCPI_BASE + 0x0c) |
| #define OCPI_SINT1 (OCPI_BASE + 0x10) |
| #define OCPI_PROT (OCPI_BASE + 0x14) |
| #define OCPI_SEC (OCPI_BASE + 0x18) |
| |
| /* USB OHCI OCPI access error registers */ |
| #define HOSTUEADDR 0xfffba0e0 |
| #define HOSTUESTATUS 0xfffba0e4 |
| |
| static struct clk *ocpi_ck; |
| |
| /* |
| * Enables device access to OMAP buses via the OCPI bridge |
| */ |
| int ocpi_enable(void) |
| { |
| unsigned int val; |
| |
| if (!cpu_is_omap16xx()) |
| return -ENODEV; |
| |
| /* Enable access for OHCI in OCPI */ |
| val = omap_readl(OCPI_PROT); |
| val &= ~0xff; |
| /* val &= (1 << 0); Allow access only to EMIFS */ |
| omap_writel(val, OCPI_PROT); |
| |
| val = omap_readl(OCPI_SEC); |
| val &= ~0xff; |
| omap_writel(val, OCPI_SEC); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ocpi_enable); |
| |
| static int __init omap_ocpi_init(void) |
| { |
| if (!cpu_is_omap16xx()) |
| return -ENODEV; |
| |
| ocpi_ck = clk_get(NULL, "l3_ocpi_ck"); |
| if (IS_ERR(ocpi_ck)) |
| return PTR_ERR(ocpi_ck); |
| |
| clk_enable(ocpi_ck); |
| ocpi_enable(); |
| pr_info("OMAP OCPI interconnect driver loaded\n"); |
| |
| return 0; |
| } |
| |
| static void __exit omap_ocpi_exit(void) |
| { |
| /* REVISIT: Disable OCPI */ |
| |
| if (!cpu_is_omap16xx()) |
| return; |
| |
| clk_disable(ocpi_ck); |
| clk_put(ocpi_ck); |
| } |
| |
| MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); |
| MODULE_DESCRIPTION("OMAP OCPI bus controller module"); |
| MODULE_LICENSE("GPL"); |
| module_init(omap_ocpi_init); |
| module_exit(omap_ocpi_exit); |