| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2018 Chen-Yu Tsai |
| * |
| * Chen-Yu Tsai <wens@csie.org> |
| * |
| * arch/arm/mach-sunxi/mc_smp.c |
| * |
| * Based on Allwinner code, arch/arm/mach-exynos/mcpm-exynos.c, and |
| * arch/arm/mach-hisi/platmcpm.c |
| * Cluster cache enable trampoline code adapted from MCPM framework |
| */ |
| |
| #include <linux/arm-cci.h> |
| #include <linux/cpu_pm.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/irqchip/arm-gic.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/smp.h> |
| |
| #include <asm/cacheflush.h> |
| #include <asm/cp15.h> |
| #include <asm/cputype.h> |
| #include <asm/idmap.h> |
| #include <asm/smp_plat.h> |
| #include <asm/suspend.h> |
| |
| #define SUNXI_CPUS_PER_CLUSTER 4 |
| #define SUNXI_NR_CLUSTERS 2 |
| |
| #define POLL_USEC 100 |
| #define TIMEOUT_USEC 100000 |
| |
| #define CPUCFG_CX_CTRL_REG0(c) (0x10 * (c)) |
| #define CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE(n) BIT(n) |
| #define CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE_ALL 0xf |
| #define CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A7 BIT(4) |
| #define CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A15 BIT(0) |
| #define CPUCFG_CX_CTRL_REG1(c) (0x10 * (c) + 0x4) |
| #define CPUCFG_CX_CTRL_REG1_ACINACTM BIT(0) |
| #define CPUCFG_CX_STATUS(c) (0x30 + 0x4 * (c)) |
| #define CPUCFG_CX_STATUS_STANDBYWFI(n) BIT(16 + (n)) |
| #define CPUCFG_CX_STATUS_STANDBYWFIL2 BIT(0) |
| #define CPUCFG_CX_RST_CTRL(c) (0x80 + 0x4 * (c)) |
| #define CPUCFG_CX_RST_CTRL_DBG_SOC_RST BIT(24) |
| #define CPUCFG_CX_RST_CTRL_ETM_RST(n) BIT(20 + (n)) |
| #define CPUCFG_CX_RST_CTRL_ETM_RST_ALL (0xf << 20) |
| #define CPUCFG_CX_RST_CTRL_DBG_RST(n) BIT(16 + (n)) |
| #define CPUCFG_CX_RST_CTRL_DBG_RST_ALL (0xf << 16) |
| #define CPUCFG_CX_RST_CTRL_H_RST BIT(12) |
| #define CPUCFG_CX_RST_CTRL_L2_RST BIT(8) |
| #define CPUCFG_CX_RST_CTRL_CX_RST(n) BIT(4 + (n)) |
| #define CPUCFG_CX_RST_CTRL_CORE_RST(n) BIT(n) |
| #define CPUCFG_CX_RST_CTRL_CORE_RST_ALL (0xf << 0) |
| |
| #define PRCM_CPU_PO_RST_CTRL(c) (0x4 + 0x4 * (c)) |
| #define PRCM_CPU_PO_RST_CTRL_CORE(n) BIT(n) |
| #define PRCM_CPU_PO_RST_CTRL_CORE_ALL 0xf |
| #define PRCM_PWROFF_GATING_REG(c) (0x100 + 0x4 * (c)) |
| /* The power off register for clusters are different from a80 and a83t */ |
| #define PRCM_PWROFF_GATING_REG_CLUSTER_SUN8I BIT(0) |
| #define PRCM_PWROFF_GATING_REG_CLUSTER_SUN9I BIT(4) |
| #define PRCM_PWROFF_GATING_REG_CORE(n) BIT(n) |
| #define PRCM_PWR_SWITCH_REG(c, cpu) (0x140 + 0x10 * (c) + 0x4 * (cpu)) |
| #define PRCM_CPU_SOFT_ENTRY_REG 0x164 |
| |
| /* R_CPUCFG registers, specific to sun8i-a83t */ |
| #define R_CPUCFG_CLUSTER_PO_RST_CTRL(c) (0x30 + (c) * 0x4) |
| #define R_CPUCFG_CLUSTER_PO_RST_CTRL_CORE(n) BIT(n) |
| #define R_CPUCFG_CPU_SOFT_ENTRY_REG 0x01a4 |
| |
| #define CPU0_SUPPORT_HOTPLUG_MAGIC0 0xFA50392F |
| #define CPU0_SUPPORT_HOTPLUG_MAGIC1 0x790DCA3A |
| |
| static void __iomem *cpucfg_base; |
| static void __iomem *prcm_base; |
| static void __iomem *sram_b_smp_base; |
| static void __iomem *r_cpucfg_base; |
| |
| extern void sunxi_mc_smp_secondary_startup(void); |
| extern void sunxi_mc_smp_resume(void); |
| static bool is_a83t; |
| |
| static bool sunxi_core_is_cortex_a15(unsigned int core, unsigned int cluster) |
| { |
| struct device_node *node; |
| int cpu = cluster * SUNXI_CPUS_PER_CLUSTER + core; |
| bool is_compatible; |
| |
| node = of_cpu_device_node_get(cpu); |
| |
| /* In case of_cpu_device_node_get fails */ |
| if (!node) |
| node = of_get_cpu_node(cpu, NULL); |
| |
| if (!node) { |
| /* |
| * There's no point in returning an error, since we |
| * would be mid way in a core or cluster power sequence. |
| */ |
| pr_err("%s: Couldn't get CPU cluster %u core %u device node\n", |
| __func__, cluster, core); |
| |
| return false; |
| } |
| |
| is_compatible = of_device_is_compatible(node, "arm,cortex-a15"); |
| of_node_put(node); |
| return is_compatible; |
| } |
| |
| static int sunxi_cpu_power_switch_set(unsigned int cpu, unsigned int cluster, |
| bool enable) |
| { |
| u32 reg; |
| |
| /* control sequence from Allwinner A80 user manual v1.2 PRCM section */ |
| reg = readl(prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); |
| if (enable) { |
| if (reg == 0x00) { |
| pr_debug("power clamp for cluster %u cpu %u already open\n", |
| cluster, cpu); |
| return 0; |
| } |
| |
| writel(0xff, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); |
| udelay(10); |
| writel(0xfe, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); |
| udelay(10); |
| writel(0xf8, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); |
| udelay(10); |
| writel(0xf0, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); |
| udelay(10); |
| writel(0x00, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); |
| udelay(10); |
| } else { |
| writel(0xff, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu)); |
| udelay(10); |
| } |
| |
| return 0; |
| } |
| |
| static void sunxi_cpu0_hotplug_support_set(bool enable) |
| { |
| if (enable) { |
| writel(CPU0_SUPPORT_HOTPLUG_MAGIC0, sram_b_smp_base); |
| writel(CPU0_SUPPORT_HOTPLUG_MAGIC1, sram_b_smp_base + 0x4); |
| } else { |
| writel(0x0, sram_b_smp_base); |
| writel(0x0, sram_b_smp_base + 0x4); |
| } |
| } |
| |
| static int sunxi_cpu_powerup(unsigned int cpu, unsigned int cluster) |
| { |
| u32 reg; |
| |
| pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu); |
| if (cpu >= SUNXI_CPUS_PER_CLUSTER || cluster >= SUNXI_NR_CLUSTERS) |
| return -EINVAL; |
| |
| /* Set hotplug support magic flags for cpu0 */ |
| if (cluster == 0 && cpu == 0) |
| sunxi_cpu0_hotplug_support_set(true); |
| |
| /* assert processor power-on reset */ |
| reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster)); |
| reg &= ~PRCM_CPU_PO_RST_CTRL_CORE(cpu); |
| writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster)); |
| |
| if (is_a83t) { |
| /* assert cpu power-on reset */ |
| reg = readl(r_cpucfg_base + |
| R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster)); |
| reg &= ~(R_CPUCFG_CLUSTER_PO_RST_CTRL_CORE(cpu)); |
| writel(reg, r_cpucfg_base + |
| R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster)); |
| udelay(10); |
| } |
| |
| /* Cortex-A7: hold L1 reset disable signal low */ |
| if (!sunxi_core_is_cortex_a15(cpu, cluster)) { |
| reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster)); |
| reg &= ~CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE(cpu); |
| writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster)); |
| } |
| |
| /* assert processor related resets */ |
| reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); |
| reg &= ~CPUCFG_CX_RST_CTRL_DBG_RST(cpu); |
| |
| /* |
| * Allwinner code also asserts resets for NEON on A15. According |
| * to ARM manuals, asserting power-on reset is sufficient. |
| */ |
| if (!sunxi_core_is_cortex_a15(cpu, cluster)) |
| reg &= ~CPUCFG_CX_RST_CTRL_ETM_RST(cpu); |
| |
| writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); |
| |
| /* open power switch */ |
| sunxi_cpu_power_switch_set(cpu, cluster, true); |
| |
| /* Handle A83T bit swap */ |
| if (is_a83t) { |
| if (cpu == 0) |
| cpu = 4; |
| } |
| |
| /* clear processor power gate */ |
| reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster)); |
| reg &= ~PRCM_PWROFF_GATING_REG_CORE(cpu); |
| writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster)); |
| udelay(20); |
| |
| /* Handle A83T bit swap */ |
| if (is_a83t) { |
| if (cpu == 4) |
| cpu = 0; |
| } |
| |
| /* de-assert processor power-on reset */ |
| reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster)); |
| reg |= PRCM_CPU_PO_RST_CTRL_CORE(cpu); |
| writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster)); |
| |
| if (is_a83t) { |
| reg = readl(r_cpucfg_base + |
| R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster)); |
| reg |= R_CPUCFG_CLUSTER_PO_RST_CTRL_CORE(cpu); |
| writel(reg, r_cpucfg_base + |
| R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster)); |
| udelay(10); |
| } |
| |
| /* de-assert all processor resets */ |
| reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); |
| reg |= CPUCFG_CX_RST_CTRL_DBG_RST(cpu); |
| reg |= CPUCFG_CX_RST_CTRL_CORE_RST(cpu); |
| if (!sunxi_core_is_cortex_a15(cpu, cluster)) |
| reg |= CPUCFG_CX_RST_CTRL_ETM_RST(cpu); |
| else |
| reg |= CPUCFG_CX_RST_CTRL_CX_RST(cpu); /* NEON */ |
| writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); |
| |
| return 0; |
| } |
| |
| static int sunxi_cluster_powerup(unsigned int cluster) |
| { |
| u32 reg; |
| |
| pr_debug("%s: cluster %u\n", __func__, cluster); |
| if (cluster >= SUNXI_NR_CLUSTERS) |
| return -EINVAL; |
| |
| /* For A83T, assert cluster cores resets */ |
| if (is_a83t) { |
| reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); |
| reg &= ~CPUCFG_CX_RST_CTRL_CORE_RST_ALL; /* Core Reset */ |
| writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); |
| udelay(10); |
| } |
| |
| /* assert ACINACTM */ |
| reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster)); |
| reg |= CPUCFG_CX_CTRL_REG1_ACINACTM; |
| writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster)); |
| |
| /* assert cluster processor power-on resets */ |
| reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster)); |
| reg &= ~PRCM_CPU_PO_RST_CTRL_CORE_ALL; |
| writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster)); |
| |
| /* assert cluster cores resets */ |
| if (is_a83t) { |
| reg = readl(r_cpucfg_base + |
| R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster)); |
| reg &= ~CPUCFG_CX_RST_CTRL_CORE_RST_ALL; |
| writel(reg, r_cpucfg_base + |
| R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster)); |
| udelay(10); |
| } |
| |
| /* assert cluster resets */ |
| reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); |
| reg &= ~CPUCFG_CX_RST_CTRL_DBG_SOC_RST; |
| reg &= ~CPUCFG_CX_RST_CTRL_DBG_RST_ALL; |
| reg &= ~CPUCFG_CX_RST_CTRL_H_RST; |
| reg &= ~CPUCFG_CX_RST_CTRL_L2_RST; |
| |
| /* |
| * Allwinner code also asserts resets for NEON on A15. According |
| * to ARM manuals, asserting power-on reset is sufficient. |
| */ |
| if (!sunxi_core_is_cortex_a15(0, cluster)) |
| reg &= ~CPUCFG_CX_RST_CTRL_ETM_RST_ALL; |
| |
| writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); |
| |
| /* hold L1/L2 reset disable signals low */ |
| reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster)); |
| if (sunxi_core_is_cortex_a15(0, cluster)) { |
| /* Cortex-A15: hold L2RSTDISABLE low */ |
| reg &= ~CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A15; |
| } else { |
| /* Cortex-A7: hold L1RSTDISABLE and L2RSTDISABLE low */ |
| reg &= ~CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE_ALL; |
| reg &= ~CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A7; |
| } |
| writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster)); |
| |
| /* clear cluster power gate */ |
| reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster)); |
| if (is_a83t) |
| reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER_SUN8I; |
| else |
| reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER_SUN9I; |
| writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster)); |
| udelay(20); |
| |
| /* de-assert cluster resets */ |
| reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); |
| reg |= CPUCFG_CX_RST_CTRL_DBG_SOC_RST; |
| reg |= CPUCFG_CX_RST_CTRL_H_RST; |
| reg |= CPUCFG_CX_RST_CTRL_L2_RST; |
| writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); |
| |
| /* de-assert ACINACTM */ |
| reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster)); |
| reg &= ~CPUCFG_CX_CTRL_REG1_ACINACTM; |
| writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster)); |
| |
| return 0; |
| } |
| |
| /* |
| * This bit is shared between the initial nocache_trampoline call to |
| * enable CCI-400 and proper cluster cache disable before power down. |
| */ |
| static void sunxi_cluster_cache_disable_without_axi(void) |
| { |
| if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { |
| /* |
| * On the Cortex-A15 we need to disable |
| * L2 prefetching before flushing the cache. |
| */ |
| asm volatile( |
| "mcr p15, 1, %0, c15, c0, 3\n" |
| "isb\n" |
| "dsb" |
| : : "r" (0x400)); |
| } |
| |
| /* Flush all cache levels for this cluster. */ |
| v7_exit_coherency_flush(all); |
| |
| /* |
| * Disable cluster-level coherency by masking |
| * incoming snoops and DVM messages: |
| */ |
| cci_disable_port_by_cpu(read_cpuid_mpidr()); |
| } |
| |
| static int sunxi_mc_smp_cpu_table[SUNXI_NR_CLUSTERS][SUNXI_CPUS_PER_CLUSTER]; |
| int sunxi_mc_smp_first_comer; |
| |
| static DEFINE_SPINLOCK(boot_lock); |
| |
| static bool sunxi_mc_smp_cluster_is_down(unsigned int cluster) |
| { |
| int i; |
| |
| for (i = 0; i < SUNXI_CPUS_PER_CLUSTER; i++) |
| if (sunxi_mc_smp_cpu_table[cluster][i]) |
| return false; |
| return true; |
| } |
| |
| static void sunxi_mc_smp_secondary_init(unsigned int cpu) |
| { |
| /* Clear hotplug support magic flags for cpu0 */ |
| if (cpu == 0) |
| sunxi_cpu0_hotplug_support_set(false); |
| } |
| |
| static int sunxi_mc_smp_boot_secondary(unsigned int l_cpu, struct task_struct *idle) |
| { |
| unsigned int mpidr, cpu, cluster; |
| |
| mpidr = cpu_logical_map(l_cpu); |
| cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); |
| cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); |
| |
| if (!cpucfg_base) |
| return -ENODEV; |
| if (cluster >= SUNXI_NR_CLUSTERS || cpu >= SUNXI_CPUS_PER_CLUSTER) |
| return -EINVAL; |
| |
| spin_lock_irq(&boot_lock); |
| |
| if (sunxi_mc_smp_cpu_table[cluster][cpu]) |
| goto out; |
| |
| if (sunxi_mc_smp_cluster_is_down(cluster)) { |
| sunxi_mc_smp_first_comer = true; |
| sunxi_cluster_powerup(cluster); |
| } else { |
| sunxi_mc_smp_first_comer = false; |
| } |
| |
| /* This is read by incoming CPUs with their cache and MMU disabled */ |
| sync_cache_w(&sunxi_mc_smp_first_comer); |
| sunxi_cpu_powerup(cpu, cluster); |
| |
| out: |
| sunxi_mc_smp_cpu_table[cluster][cpu]++; |
| spin_unlock_irq(&boot_lock); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| static void sunxi_cluster_cache_disable(void) |
| { |
| unsigned int cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1); |
| u32 reg; |
| |
| pr_debug("%s: cluster %u\n", __func__, cluster); |
| |
| sunxi_cluster_cache_disable_without_axi(); |
| |
| /* last man standing, assert ACINACTM */ |
| reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster)); |
| reg |= CPUCFG_CX_CTRL_REG1_ACINACTM; |
| writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster)); |
| } |
| |
| static void sunxi_mc_smp_cpu_die(unsigned int l_cpu) |
| { |
| unsigned int mpidr, cpu, cluster; |
| bool last_man; |
| |
| mpidr = cpu_logical_map(l_cpu); |
| cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); |
| cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); |
| pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu); |
| |
| spin_lock(&boot_lock); |
| sunxi_mc_smp_cpu_table[cluster][cpu]--; |
| if (sunxi_mc_smp_cpu_table[cluster][cpu] == 1) { |
| /* A power_up request went ahead of us. */ |
| pr_debug("%s: aborting due to a power up request\n", |
| __func__); |
| spin_unlock(&boot_lock); |
| return; |
| } else if (sunxi_mc_smp_cpu_table[cluster][cpu] > 1) { |
| pr_err("Cluster %d CPU%d boots multiple times\n", |
| cluster, cpu); |
| BUG(); |
| } |
| |
| last_man = sunxi_mc_smp_cluster_is_down(cluster); |
| spin_unlock(&boot_lock); |
| |
| gic_cpu_if_down(0); |
| if (last_man) |
| sunxi_cluster_cache_disable(); |
| else |
| v7_exit_coherency_flush(louis); |
| |
| for (;;) |
| wfi(); |
| } |
| |
| static int sunxi_cpu_powerdown(unsigned int cpu, unsigned int cluster) |
| { |
| u32 reg; |
| int gating_bit = cpu; |
| |
| pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu); |
| if (cpu >= SUNXI_CPUS_PER_CLUSTER || cluster >= SUNXI_NR_CLUSTERS) |
| return -EINVAL; |
| |
| if (is_a83t && cpu == 0) |
| gating_bit = 4; |
| |
| /* gate processor power */ |
| reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster)); |
| reg |= PRCM_PWROFF_GATING_REG_CORE(gating_bit); |
| writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster)); |
| udelay(20); |
| |
| /* close power switch */ |
| sunxi_cpu_power_switch_set(cpu, cluster, false); |
| |
| return 0; |
| } |
| |
| static int sunxi_cluster_powerdown(unsigned int cluster) |
| { |
| u32 reg; |
| |
| pr_debug("%s: cluster %u\n", __func__, cluster); |
| if (cluster >= SUNXI_NR_CLUSTERS) |
| return -EINVAL; |
| |
| /* assert cluster resets or system will hang */ |
| pr_debug("%s: assert cluster reset\n", __func__); |
| reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); |
| reg &= ~CPUCFG_CX_RST_CTRL_DBG_SOC_RST; |
| reg &= ~CPUCFG_CX_RST_CTRL_H_RST; |
| reg &= ~CPUCFG_CX_RST_CTRL_L2_RST; |
| writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster)); |
| |
| /* gate cluster power */ |
| pr_debug("%s: gate cluster power\n", __func__); |
| reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster)); |
| if (is_a83t) |
| reg |= PRCM_PWROFF_GATING_REG_CLUSTER_SUN8I; |
| else |
| reg |= PRCM_PWROFF_GATING_REG_CLUSTER_SUN9I; |
| writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster)); |
| udelay(20); |
| |
| return 0; |
| } |
| |
| static int sunxi_mc_smp_cpu_kill(unsigned int l_cpu) |
| { |
| unsigned int mpidr, cpu, cluster; |
| unsigned int tries, count; |
| int ret = 0; |
| u32 reg; |
| |
| mpidr = cpu_logical_map(l_cpu); |
| cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); |
| cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); |
| |
| /* This should never happen */ |
| if (WARN_ON(cluster >= SUNXI_NR_CLUSTERS || |
| cpu >= SUNXI_CPUS_PER_CLUSTER)) |
| return 0; |
| |
| /* wait for CPU core to die and enter WFI */ |
| count = TIMEOUT_USEC / POLL_USEC; |
| spin_lock_irq(&boot_lock); |
| for (tries = 0; tries < count; tries++) { |
| spin_unlock_irq(&boot_lock); |
| usleep_range(POLL_USEC / 2, POLL_USEC); |
| spin_lock_irq(&boot_lock); |
| |
| /* |
| * If the user turns off a bunch of cores at the same |
| * time, the kernel might call cpu_kill before some of |
| * them are ready. This is because boot_lock serializes |
| * both cpu_die and cpu_kill callbacks. Either one could |
| * run first. We should wait for cpu_die to complete. |
| */ |
| if (sunxi_mc_smp_cpu_table[cluster][cpu]) |
| continue; |
| |
| reg = readl(cpucfg_base + CPUCFG_CX_STATUS(cluster)); |
| if (reg & CPUCFG_CX_STATUS_STANDBYWFI(cpu)) |
| break; |
| } |
| |
| if (tries >= count) { |
| ret = ETIMEDOUT; |
| goto out; |
| } |
| |
| /* power down CPU core */ |
| sunxi_cpu_powerdown(cpu, cluster); |
| |
| if (!sunxi_mc_smp_cluster_is_down(cluster)) |
| goto out; |
| |
| /* wait for cluster L2 WFI */ |
| ret = readl_poll_timeout(cpucfg_base + CPUCFG_CX_STATUS(cluster), reg, |
| reg & CPUCFG_CX_STATUS_STANDBYWFIL2, |
| POLL_USEC, TIMEOUT_USEC); |
| if (ret) { |
| /* |
| * Ignore timeout on the cluster. Leaving the cluster on |
| * will not affect system execution, just use a bit more |
| * power. But returning an error here will only confuse |
| * the user as the CPU has already been shutdown. |
| */ |
| ret = 0; |
| goto out; |
| } |
| |
| /* Power down cluster */ |
| sunxi_cluster_powerdown(cluster); |
| |
| out: |
| spin_unlock_irq(&boot_lock); |
| pr_debug("%s: cluster %u cpu %u powerdown: %d\n", |
| __func__, cluster, cpu, ret); |
| return !ret; |
| } |
| |
| static bool sunxi_mc_smp_cpu_can_disable(unsigned int cpu) |
| { |
| /* CPU0 hotplug not handled for sun8i-a83t */ |
| if (is_a83t) |
| if (cpu == 0) |
| return false; |
| return true; |
| } |
| #endif |
| |
| static const struct smp_operations sunxi_mc_smp_smp_ops __initconst = { |
| .smp_secondary_init = sunxi_mc_smp_secondary_init, |
| .smp_boot_secondary = sunxi_mc_smp_boot_secondary, |
| #ifdef CONFIG_HOTPLUG_CPU |
| .cpu_die = sunxi_mc_smp_cpu_die, |
| .cpu_kill = sunxi_mc_smp_cpu_kill, |
| .cpu_can_disable = sunxi_mc_smp_cpu_can_disable, |
| #endif |
| }; |
| |
| static bool __init sunxi_mc_smp_cpu_table_init(void) |
| { |
| unsigned int mpidr, cpu, cluster; |
| |
| mpidr = read_cpuid_mpidr(); |
| cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); |
| cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); |
| |
| if (cluster >= SUNXI_NR_CLUSTERS || cpu >= SUNXI_CPUS_PER_CLUSTER) { |
| pr_err("%s: boot CPU is out of bounds!\n", __func__); |
| return false; |
| } |
| sunxi_mc_smp_cpu_table[cluster][cpu] = 1; |
| return true; |
| } |
| |
| /* |
| * Adapted from arch/arm/common/mc_smp_entry.c |
| * |
| * We need the trampoline code to enable CCI-400 on the first cluster |
| */ |
| typedef typeof(cpu_reset) phys_reset_t; |
| |
| static int __init nocache_trampoline(unsigned long __unused) |
| { |
| phys_reset_t phys_reset; |
| |
| setup_mm_for_reboot(); |
| sunxi_cluster_cache_disable_without_axi(); |
| |
| phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset); |
| phys_reset(__pa_symbol(sunxi_mc_smp_resume), false); |
| BUG(); |
| } |
| |
| static int __init sunxi_mc_smp_loopback(void) |
| { |
| int ret; |
| |
| /* |
| * We're going to soft-restart the current CPU through the |
| * low-level MCPM code by leveraging the suspend/resume |
| * infrastructure. Let's play it safe by using cpu_pm_enter() |
| * in case the CPU init code path resets the VFP or similar. |
| */ |
| sunxi_mc_smp_first_comer = true; |
| local_irq_disable(); |
| local_fiq_disable(); |
| ret = cpu_pm_enter(); |
| if (!ret) { |
| ret = cpu_suspend(0, nocache_trampoline); |
| cpu_pm_exit(); |
| } |
| local_fiq_enable(); |
| local_irq_enable(); |
| sunxi_mc_smp_first_comer = false; |
| |
| return ret; |
| } |
| |
| /* |
| * This holds any device nodes that we requested resources for, |
| * so that we may easily release resources in the error path. |
| */ |
| struct sunxi_mc_smp_nodes { |
| struct device_node *prcm_node; |
| struct device_node *cpucfg_node; |
| struct device_node *sram_node; |
| struct device_node *r_cpucfg_node; |
| }; |
| |
| /* This structure holds SoC-specific bits tied to an enable-method string. */ |
| struct sunxi_mc_smp_data { |
| const char *enable_method; |
| int (*get_smp_nodes)(struct sunxi_mc_smp_nodes *nodes); |
| bool is_a83t; |
| }; |
| |
| static void __init sunxi_mc_smp_put_nodes(struct sunxi_mc_smp_nodes *nodes) |
| { |
| of_node_put(nodes->prcm_node); |
| of_node_put(nodes->cpucfg_node); |
| of_node_put(nodes->sram_node); |
| of_node_put(nodes->r_cpucfg_node); |
| memset(nodes, 0, sizeof(*nodes)); |
| } |
| |
| static int __init sun9i_a80_get_smp_nodes(struct sunxi_mc_smp_nodes *nodes) |
| { |
| nodes->prcm_node = of_find_compatible_node(NULL, NULL, |
| "allwinner,sun9i-a80-prcm"); |
| if (!nodes->prcm_node) { |
| pr_err("%s: PRCM not available\n", __func__); |
| return -ENODEV; |
| } |
| |
| nodes->cpucfg_node = of_find_compatible_node(NULL, NULL, |
| "allwinner,sun9i-a80-cpucfg"); |
| if (!nodes->cpucfg_node) { |
| pr_err("%s: CPUCFG not available\n", __func__); |
| return -ENODEV; |
| } |
| |
| nodes->sram_node = of_find_compatible_node(NULL, NULL, |
| "allwinner,sun9i-a80-smp-sram"); |
| if (!nodes->sram_node) { |
| pr_err("%s: Secure SRAM not available\n", __func__); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int __init sun8i_a83t_get_smp_nodes(struct sunxi_mc_smp_nodes *nodes) |
| { |
| nodes->prcm_node = of_find_compatible_node(NULL, NULL, |
| "allwinner,sun8i-a83t-r-ccu"); |
| if (!nodes->prcm_node) { |
| pr_err("%s: PRCM not available\n", __func__); |
| return -ENODEV; |
| } |
| |
| nodes->cpucfg_node = of_find_compatible_node(NULL, NULL, |
| "allwinner,sun8i-a83t-cpucfg"); |
| if (!nodes->cpucfg_node) { |
| pr_err("%s: CPUCFG not available\n", __func__); |
| return -ENODEV; |
| } |
| |
| nodes->r_cpucfg_node = of_find_compatible_node(NULL, NULL, |
| "allwinner,sun8i-a83t-r-cpucfg"); |
| if (!nodes->r_cpucfg_node) { |
| pr_err("%s: RCPUCFG not available\n", __func__); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static const struct sunxi_mc_smp_data sunxi_mc_smp_data[] __initconst = { |
| { |
| .enable_method = "allwinner,sun9i-a80-smp", |
| .get_smp_nodes = sun9i_a80_get_smp_nodes, |
| }, |
| { |
| .enable_method = "allwinner,sun8i-a83t-smp", |
| .get_smp_nodes = sun8i_a83t_get_smp_nodes, |
| .is_a83t = true, |
| }, |
| }; |
| |
| static int __init sunxi_mc_smp_init(void) |
| { |
| struct sunxi_mc_smp_nodes nodes = { 0 }; |
| struct device_node *node; |
| struct resource res; |
| void __iomem *addr; |
| int i, ret; |
| |
| /* |
| * Don't bother checking the "cpus" node, as an enable-method |
| * property in that node is undocumented. |
| */ |
| node = of_cpu_device_node_get(0); |
| if (!node) |
| return -ENODEV; |
| |
| /* |
| * We can't actually use the enable-method magic in the kernel. |
| * Our loopback / trampoline code uses the CPU suspend framework, |
| * which requires the identity mapping be available. It would not |
| * yet be available if we used the .init_cpus or .prepare_cpus |
| * callbacks in smp_operations, which we would use if we were to |
| * use CPU_METHOD_OF_DECLARE |
| */ |
| for (i = 0; i < ARRAY_SIZE(sunxi_mc_smp_data); i++) { |
| ret = of_property_match_string(node, "enable-method", |
| sunxi_mc_smp_data[i].enable_method); |
| if (!ret) |
| break; |
| } |
| |
| is_a83t = sunxi_mc_smp_data[i].is_a83t; |
| |
| of_node_put(node); |
| if (ret) |
| return -ENODEV; |
| |
| if (!sunxi_mc_smp_cpu_table_init()) |
| return -EINVAL; |
| |
| if (!cci_probed()) { |
| pr_err("%s: CCI-400 not available\n", __func__); |
| return -ENODEV; |
| } |
| |
| /* Get needed device tree nodes */ |
| ret = sunxi_mc_smp_data[i].get_smp_nodes(&nodes); |
| if (ret) |
| goto err_put_nodes; |
| |
| /* |
| * Unfortunately we can not request the I/O region for the PRCM. |
| * It is shared with the PRCM clock. |
| */ |
| prcm_base = of_iomap(nodes.prcm_node, 0); |
| if (!prcm_base) { |
| pr_err("%s: failed to map PRCM registers\n", __func__); |
| ret = -ENOMEM; |
| goto err_put_nodes; |
| } |
| |
| cpucfg_base = of_io_request_and_map(nodes.cpucfg_node, 0, |
| "sunxi-mc-smp"); |
| if (IS_ERR(cpucfg_base)) { |
| ret = PTR_ERR(cpucfg_base); |
| pr_err("%s: failed to map CPUCFG registers: %d\n", |
| __func__, ret); |
| goto err_unmap_prcm; |
| } |
| |
| if (is_a83t) { |
| r_cpucfg_base = of_io_request_and_map(nodes.r_cpucfg_node, |
| 0, "sunxi-mc-smp"); |
| if (IS_ERR(r_cpucfg_base)) { |
| ret = PTR_ERR(r_cpucfg_base); |
| pr_err("%s: failed to map R-CPUCFG registers\n", |
| __func__); |
| goto err_unmap_release_cpucfg; |
| } |
| } else { |
| sram_b_smp_base = of_io_request_and_map(nodes.sram_node, 0, |
| "sunxi-mc-smp"); |
| if (IS_ERR(sram_b_smp_base)) { |
| ret = PTR_ERR(sram_b_smp_base); |
| pr_err("%s: failed to map secure SRAM\n", __func__); |
| goto err_unmap_release_cpucfg; |
| } |
| } |
| |
| /* Configure CCI-400 for boot cluster */ |
| ret = sunxi_mc_smp_loopback(); |
| if (ret) { |
| pr_err("%s: failed to configure boot cluster: %d\n", |
| __func__, ret); |
| goto err_unmap_release_sram_rcpucfg; |
| } |
| |
| /* We don't need the device nodes anymore */ |
| sunxi_mc_smp_put_nodes(&nodes); |
| |
| /* Set the hardware entry point address */ |
| if (is_a83t) |
| addr = r_cpucfg_base + R_CPUCFG_CPU_SOFT_ENTRY_REG; |
| else |
| addr = prcm_base + PRCM_CPU_SOFT_ENTRY_REG; |
| writel(__pa_symbol(sunxi_mc_smp_secondary_startup), addr); |
| |
| /* Actually enable multi cluster SMP */ |
| smp_set_ops(&sunxi_mc_smp_smp_ops); |
| |
| pr_info("sunxi multi cluster SMP support installed\n"); |
| |
| return 0; |
| |
| err_unmap_release_sram_rcpucfg: |
| if (is_a83t) { |
| iounmap(r_cpucfg_base); |
| of_address_to_resource(nodes.r_cpucfg_node, 0, &res); |
| } else { |
| iounmap(sram_b_smp_base); |
| of_address_to_resource(nodes.sram_node, 0, &res); |
| } |
| release_mem_region(res.start, resource_size(&res)); |
| err_unmap_release_cpucfg: |
| iounmap(cpucfg_base); |
| of_address_to_resource(nodes.cpucfg_node, 0, &res); |
| release_mem_region(res.start, resource_size(&res)); |
| err_unmap_prcm: |
| iounmap(prcm_base); |
| err_put_nodes: |
| sunxi_mc_smp_put_nodes(&nodes); |
| return ret; |
| } |
| |
| early_initcall(sunxi_mc_smp_init); |