| /* |
| * Copyright (c) 2017 Oracle and/or its affiliates. All rights reserved. |
| */ |
| |
| /* |
| * This file is included up to twice from vdso2c.c. It generates code for |
| * 32-bit and 64-bit vDSOs. We will eventually need both for 64-bit builds, |
| * since 32-bit vDSOs will then be built for 32-bit userspace. |
| */ |
| |
| static void BITSFUNC(go)(void *raw_addr, size_t raw_len, |
| void *stripped_addr, size_t stripped_len, |
| FILE *outfile, const char *name) |
| { |
| int found_load = 0; |
| unsigned long load_size = -1; /* Work around bogus warning */ |
| unsigned long mapping_size; |
| int i; |
| unsigned long j; |
| ELF(Shdr) *symtab_hdr = NULL, *strtab_hdr; |
| ELF(Ehdr) *hdr = (ELF(Ehdr) *)raw_addr; |
| ELF(Dyn) *dyn = 0, *dyn_end = 0; |
| INT_BITS syms[NSYMS] = {}; |
| |
| ELF(Phdr) *pt = (ELF(Phdr) *)(raw_addr + GET_BE(&hdr->e_phoff)); |
| |
| /* Walk the segment table. */ |
| for (i = 0; i < GET_BE(&hdr->e_phnum); i++) { |
| if (GET_BE(&pt[i].p_type) == PT_LOAD) { |
| if (found_load) |
| fail("multiple PT_LOAD segs\n"); |
| |
| if (GET_BE(&pt[i].p_offset) != 0 || |
| GET_BE(&pt[i].p_vaddr) != 0) |
| fail("PT_LOAD in wrong place\n"); |
| |
| if (GET_BE(&pt[i].p_memsz) != GET_BE(&pt[i].p_filesz)) |
| fail("cannot handle memsz != filesz\n"); |
| |
| load_size = GET_BE(&pt[i].p_memsz); |
| found_load = 1; |
| } else if (GET_BE(&pt[i].p_type) == PT_DYNAMIC) { |
| dyn = raw_addr + GET_BE(&pt[i].p_offset); |
| dyn_end = raw_addr + GET_BE(&pt[i].p_offset) + |
| GET_BE(&pt[i].p_memsz); |
| } |
| } |
| if (!found_load) |
| fail("no PT_LOAD seg\n"); |
| |
| if (stripped_len < load_size) |
| fail("stripped input is too short\n"); |
| |
| /* Walk the dynamic table */ |
| for (i = 0; dyn + i < dyn_end && |
| GET_BE(&dyn[i].d_tag) != DT_NULL; i++) { |
| typeof(dyn[i].d_tag) tag = GET_BE(&dyn[i].d_tag); |
| typeof(dyn[i].d_un.d_val) val = GET_BE(&dyn[i].d_un.d_val); |
| |
| if ((tag == DT_RELSZ || tag == DT_RELASZ) && (val != 0)) |
| fail("vdso image contains dynamic relocations\n"); |
| } |
| |
| /* Walk the section table */ |
| for (i = 0; i < GET_BE(&hdr->e_shnum); i++) { |
| ELF(Shdr) *sh = raw_addr + GET_BE(&hdr->e_shoff) + |
| GET_BE(&hdr->e_shentsize) * i; |
| if (GET_BE(&sh->sh_type) == SHT_SYMTAB) |
| symtab_hdr = sh; |
| } |
| |
| if (!symtab_hdr) |
| fail("no symbol table\n"); |
| |
| strtab_hdr = raw_addr + GET_BE(&hdr->e_shoff) + |
| GET_BE(&hdr->e_shentsize) * GET_BE(&symtab_hdr->sh_link); |
| |
| /* Walk the symbol table */ |
| for (i = 0; |
| i < GET_BE(&symtab_hdr->sh_size) / GET_BE(&symtab_hdr->sh_entsize); |
| i++) { |
| int k; |
| |
| ELF(Sym) *sym = raw_addr + GET_BE(&symtab_hdr->sh_offset) + |
| GET_BE(&symtab_hdr->sh_entsize) * i; |
| const char *name = raw_addr + GET_BE(&strtab_hdr->sh_offset) + |
| GET_BE(&sym->st_name); |
| |
| for (k = 0; k < NSYMS; k++) { |
| if (!strcmp(name, required_syms[k].name)) { |
| if (syms[k]) { |
| fail("duplicate symbol %s\n", |
| required_syms[k].name); |
| } |
| |
| /* |
| * Careful: we use negative addresses, but |
| * st_value is unsigned, so we rely |
| * on syms[k] being a signed type of the |
| * correct width. |
| */ |
| syms[k] = GET_BE(&sym->st_value); |
| } |
| } |
| } |
| |
| /* Validate mapping addresses. */ |
| if (syms[sym_vvar_start] % 8192) |
| fail("vvar_begin must be a multiple of 8192\n"); |
| |
| if (!name) { |
| fwrite(stripped_addr, stripped_len, 1, outfile); |
| return; |
| } |
| |
| mapping_size = (stripped_len + 8191) / 8192 * 8192; |
| |
| fprintf(outfile, "/* AUTOMATICALLY GENERATED -- DO NOT EDIT */\n\n"); |
| fprintf(outfile, "#include <linux/cache.h>\n"); |
| fprintf(outfile, "#include <asm/vdso.h>\n"); |
| fprintf(outfile, "\n"); |
| fprintf(outfile, |
| "static unsigned char raw_data[%lu] __ro_after_init __aligned(8192)= {", |
| mapping_size); |
| for (j = 0; j < stripped_len; j++) { |
| if (j % 10 == 0) |
| fprintf(outfile, "\n\t"); |
| fprintf(outfile, "0x%02X, ", |
| (int)((unsigned char *)stripped_addr)[j]); |
| } |
| fprintf(outfile, "\n};\n\n"); |
| |
| fprintf(outfile, "const struct vdso_image %s_builtin = {\n", name); |
| fprintf(outfile, "\t.data = raw_data,\n"); |
| fprintf(outfile, "\t.size = %lu,\n", mapping_size); |
| for (i = 0; i < NSYMS; i++) { |
| if (required_syms[i].export && syms[i]) |
| fprintf(outfile, "\t.sym_%s = %" PRIi64 ",\n", |
| required_syms[i].name, (int64_t)syms[i]); |
| } |
| fprintf(outfile, "};\n"); |
| } |