| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * camss-csiphy-2ph-1-0.c |
| * |
| * Qualcomm MSM Camera Subsystem - CSIPHY Module 2phase v1.0 |
| * |
| * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved. |
| * Copyright (C) 2016-2018 Linaro Ltd. |
| */ |
| |
| #include "camss-csiphy.h" |
| |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| |
| #define CAMSS_CSI_PHY_LNn_CFG2(n) (0x004 + 0x40 * (n)) |
| #define CAMSS_CSI_PHY_LNn_CFG3(n) (0x008 + 0x40 * (n)) |
| #define CAMSS_CSI_PHY_GLBL_RESET 0x140 |
| #define CAMSS_CSI_PHY_GLBL_PWR_CFG 0x144 |
| #define CAMSS_CSI_PHY_GLBL_IRQ_CMD 0x164 |
| #define CAMSS_CSI_PHY_HW_VERSION 0x188 |
| #define CAMSS_CSI_PHY_INTERRUPT_STATUSn(n) (0x18c + 0x4 * (n)) |
| #define CAMSS_CSI_PHY_INTERRUPT_MASKn(n) (0x1ac + 0x4 * (n)) |
| #define CAMSS_CSI_PHY_INTERRUPT_CLEARn(n) (0x1cc + 0x4 * (n)) |
| #define CAMSS_CSI_PHY_GLBL_T_INIT_CFG0 0x1ec |
| #define CAMSS_CSI_PHY_T_WAKEUP_CFG0 0x1f4 |
| |
| static void csiphy_hw_version_read(struct csiphy_device *csiphy, |
| struct device *dev) |
| { |
| u8 hw_version = readl_relaxed(csiphy->base + |
| CAMSS_CSI_PHY_HW_VERSION); |
| |
| dev_dbg(dev, "CSIPHY HW Version = 0x%02x\n", hw_version); |
| } |
| |
| /* |
| * csiphy_reset - Perform software reset on CSIPHY module |
| * @csiphy: CSIPHY device |
| */ |
| static void csiphy_reset(struct csiphy_device *csiphy) |
| { |
| writel_relaxed(0x1, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET); |
| usleep_range(5000, 8000); |
| writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET); |
| } |
| |
| /* |
| * csiphy_settle_cnt_calc - Calculate settle count value |
| * |
| * Helper function to calculate settle count value. This is |
| * based on the CSI2 T_hs_settle parameter which in turn |
| * is calculated based on the CSI2 transmitter link frequency. |
| * |
| * Return settle count value or 0 if the CSI2 link frequency |
| * is not available |
| */ |
| static u8 csiphy_settle_cnt_calc(s64 link_freq, u32 timer_clk_rate) |
| { |
| u32 ui; /* ps */ |
| u32 timer_period; /* ps */ |
| u32 t_hs_prepare_max; /* ps */ |
| u32 t_hs_prepare_zero_min; /* ps */ |
| u32 t_hs_settle; /* ps */ |
| u8 settle_cnt; |
| |
| if (link_freq <= 0) |
| return 0; |
| |
| ui = div_u64(1000000000000LL, link_freq); |
| ui /= 2; |
| t_hs_prepare_max = 85000 + 6 * ui; |
| t_hs_prepare_zero_min = 145000 + 10 * ui; |
| t_hs_settle = (t_hs_prepare_max + t_hs_prepare_zero_min) / 2; |
| |
| timer_period = div_u64(1000000000000LL, timer_clk_rate); |
| settle_cnt = t_hs_settle / timer_period - 1; |
| |
| return settle_cnt; |
| } |
| |
| static void csiphy_lanes_enable(struct csiphy_device *csiphy, |
| struct csiphy_config *cfg, |
| s64 link_freq, u8 lane_mask) |
| { |
| struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg; |
| u8 settle_cnt; |
| u8 val, l = 0; |
| int i = 0; |
| |
| settle_cnt = csiphy_settle_cnt_calc(link_freq, csiphy->timer_clk_rate); |
| |
| writel_relaxed(0x1, csiphy->base + |
| CAMSS_CSI_PHY_GLBL_T_INIT_CFG0); |
| writel_relaxed(0x1, csiphy->base + |
| CAMSS_CSI_PHY_T_WAKEUP_CFG0); |
| |
| val = 0x1; |
| val |= lane_mask << 1; |
| writel_relaxed(val, csiphy->base + CAMSS_CSI_PHY_GLBL_PWR_CFG); |
| |
| val = cfg->combo_mode << 4; |
| writel_relaxed(val, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET); |
| |
| for (i = 0; i <= c->num_data; i++) { |
| if (i == c->num_data) |
| l = c->clk.pos; |
| else |
| l = c->data[i].pos; |
| |
| writel_relaxed(0x10, csiphy->base + |
| CAMSS_CSI_PHY_LNn_CFG2(l)); |
| writel_relaxed(settle_cnt, csiphy->base + |
| CAMSS_CSI_PHY_LNn_CFG3(l)); |
| writel_relaxed(0x3f, csiphy->base + |
| CAMSS_CSI_PHY_INTERRUPT_MASKn(l)); |
| writel_relaxed(0x3f, csiphy->base + |
| CAMSS_CSI_PHY_INTERRUPT_CLEARn(l)); |
| } |
| } |
| |
| static void csiphy_lanes_disable(struct csiphy_device *csiphy, |
| struct csiphy_config *cfg) |
| { |
| struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg; |
| u8 l = 0; |
| int i = 0; |
| |
| for (i = 0; i <= c->num_data; i++) { |
| if (i == c->num_data) |
| l = c->clk.pos; |
| else |
| l = c->data[i].pos; |
| |
| writel_relaxed(0x0, csiphy->base + |
| CAMSS_CSI_PHY_LNn_CFG2(l)); |
| } |
| |
| writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_PWR_CFG); |
| } |
| |
| /* |
| * csiphy_isr - CSIPHY module interrupt handler |
| * @irq: Interrupt line |
| * @dev: CSIPHY device |
| * |
| * Return IRQ_HANDLED on success |
| */ |
| static irqreturn_t csiphy_isr(int irq, void *dev) |
| { |
| struct csiphy_device *csiphy = dev; |
| u8 i; |
| |
| for (i = 0; i < 8; i++) { |
| u8 val = readl_relaxed(csiphy->base + |
| CAMSS_CSI_PHY_INTERRUPT_STATUSn(i)); |
| writel_relaxed(val, csiphy->base + |
| CAMSS_CSI_PHY_INTERRUPT_CLEARn(i)); |
| writel_relaxed(0x1, csiphy->base + CAMSS_CSI_PHY_GLBL_IRQ_CMD); |
| writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_IRQ_CMD); |
| writel_relaxed(0x0, csiphy->base + |
| CAMSS_CSI_PHY_INTERRUPT_CLEARn(i)); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| const struct csiphy_hw_ops csiphy_ops_2ph_1_0 = { |
| .hw_version_read = csiphy_hw_version_read, |
| .reset = csiphy_reset, |
| .lanes_enable = csiphy_lanes_enable, |
| .lanes_disable = csiphy_lanes_disable, |
| .isr = csiphy_isr, |
| }; |