| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2015 Cavium, Inc. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/phy.h> |
| #include <linux/of.h> |
| #include <linux/of_mdio.h> |
| #include <linux/of_net.h> |
| |
| #include "nic_reg.h" |
| #include "nic.h" |
| #include "thunder_bgx.h" |
| |
| #define DRV_NAME "thunder_bgx" |
| #define DRV_VERSION "1.0" |
| |
| /* RX_DMAC_CTL configuration */ |
| enum MCAST_MODE { |
| MCAST_MODE_REJECT = 0x0, |
| MCAST_MODE_ACCEPT = 0x1, |
| MCAST_MODE_CAM_FILTER = 0x2, |
| RSVD = 0x3 |
| }; |
| |
| #define BCAST_ACCEPT BIT(0) |
| #define CAM_ACCEPT BIT(3) |
| #define MCAST_MODE_MASK 0x3 |
| #define BGX_MCAST_MODE(x) (x << 1) |
| |
| struct dmac_map { |
| u64 vf_map; |
| u64 dmac; |
| }; |
| |
| struct lmac { |
| struct bgx *bgx; |
| /* actual number of DMACs configured */ |
| u8 dmacs_cfg; |
| /* overal number of possible DMACs could be configured per LMAC */ |
| u8 dmacs_count; |
| struct dmac_map *dmacs; /* DMAC:VFs tracking filter array */ |
| u8 mac[ETH_ALEN]; |
| u8 lmac_type; |
| u8 lane_to_sds; |
| bool use_training; |
| bool autoneg; |
| bool link_up; |
| int lmacid; /* ID within BGX */ |
| int lmacid_bd; /* ID on board */ |
| struct net_device netdev; |
| struct phy_device *phydev; |
| unsigned int last_duplex; |
| unsigned int last_link; |
| unsigned int last_speed; |
| bool is_sgmii; |
| struct delayed_work dwork; |
| struct workqueue_struct *check_link; |
| }; |
| |
| struct bgx { |
| u8 bgx_id; |
| struct lmac lmac[MAX_LMAC_PER_BGX]; |
| u8 lmac_count; |
| u8 max_lmac; |
| u8 acpi_lmac_idx; |
| void __iomem *reg_base; |
| struct pci_dev *pdev; |
| bool is_dlm; |
| bool is_rgx; |
| }; |
| |
| static struct bgx *bgx_vnic[MAX_BGX_THUNDER]; |
| static int lmac_count; /* Total no of LMACs in system */ |
| |
| static int bgx_xaui_check_link(struct lmac *lmac); |
| |
| /* Supported devices */ |
| static const struct pci_device_id bgx_id_table[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_BGX) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_RGX) }, |
| { 0, } /* end of table */ |
| }; |
| |
| MODULE_AUTHOR("Cavium Inc"); |
| MODULE_DESCRIPTION("Cavium Thunder BGX/MAC Driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_DEVICE_TABLE(pci, bgx_id_table); |
| |
| /* The Cavium ThunderX network controller can *only* be found in SoCs |
| * containing the ThunderX ARM64 CPU implementation. All accesses to the device |
| * registers on this platform are implicitly strongly ordered with respect |
| * to memory accesses. So writeq_relaxed() and readq_relaxed() are safe to use |
| * with no memory barriers in this driver. The readq()/writeq() functions add |
| * explicit ordering operation which in this case are redundant, and only |
| * add overhead. |
| */ |
| |
| /* Register read/write APIs */ |
| static u64 bgx_reg_read(struct bgx *bgx, u8 lmac, u64 offset) |
| { |
| void __iomem *addr = bgx->reg_base + ((u32)lmac << 20) + offset; |
| |
| return readq_relaxed(addr); |
| } |
| |
| static void bgx_reg_write(struct bgx *bgx, u8 lmac, u64 offset, u64 val) |
| { |
| void __iomem *addr = bgx->reg_base + ((u32)lmac << 20) + offset; |
| |
| writeq_relaxed(val, addr); |
| } |
| |
| static void bgx_reg_modify(struct bgx *bgx, u8 lmac, u64 offset, u64 val) |
| { |
| void __iomem *addr = bgx->reg_base + ((u32)lmac << 20) + offset; |
| |
| writeq_relaxed(val | readq_relaxed(addr), addr); |
| } |
| |
| static int bgx_poll_reg(struct bgx *bgx, u8 lmac, u64 reg, u64 mask, bool zero) |
| { |
| int timeout = 100; |
| u64 reg_val; |
| |
| while (timeout) { |
| reg_val = bgx_reg_read(bgx, lmac, reg); |
| if (zero && !(reg_val & mask)) |
| return 0; |
| if (!zero && (reg_val & mask)) |
| return 0; |
| usleep_range(1000, 2000); |
| timeout--; |
| } |
| return 1; |
| } |
| |
| static int max_bgx_per_node; |
| static void set_max_bgx_per_node(struct pci_dev *pdev) |
| { |
| u16 sdevid; |
| |
| if (max_bgx_per_node) |
| return; |
| |
| pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &sdevid); |
| switch (sdevid) { |
| case PCI_SUBSYS_DEVID_81XX_BGX: |
| case PCI_SUBSYS_DEVID_81XX_RGX: |
| max_bgx_per_node = MAX_BGX_PER_CN81XX; |
| break; |
| case PCI_SUBSYS_DEVID_83XX_BGX: |
| max_bgx_per_node = MAX_BGX_PER_CN83XX; |
| break; |
| case PCI_SUBSYS_DEVID_88XX_BGX: |
| default: |
| max_bgx_per_node = MAX_BGX_PER_CN88XX; |
| break; |
| } |
| } |
| |
| static struct bgx *get_bgx(int node, int bgx_idx) |
| { |
| int idx = (node * max_bgx_per_node) + bgx_idx; |
| |
| return bgx_vnic[idx]; |
| } |
| |
| /* Return number of BGX present in HW */ |
| unsigned bgx_get_map(int node) |
| { |
| int i; |
| unsigned map = 0; |
| |
| for (i = 0; i < max_bgx_per_node; i++) { |
| if (bgx_vnic[(node * max_bgx_per_node) + i]) |
| map |= (1 << i); |
| } |
| |
| return map; |
| } |
| EXPORT_SYMBOL(bgx_get_map); |
| |
| /* Return number of LMAC configured for this BGX */ |
| int bgx_get_lmac_count(int node, int bgx_idx) |
| { |
| struct bgx *bgx; |
| |
| bgx = get_bgx(node, bgx_idx); |
| if (bgx) |
| return bgx->lmac_count; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(bgx_get_lmac_count); |
| |
| /* Returns the current link status of LMAC */ |
| void bgx_get_lmac_link_state(int node, int bgx_idx, int lmacid, void *status) |
| { |
| struct bgx_link_status *link = (struct bgx_link_status *)status; |
| struct bgx *bgx; |
| struct lmac *lmac; |
| |
| bgx = get_bgx(node, bgx_idx); |
| if (!bgx) |
| return; |
| |
| lmac = &bgx->lmac[lmacid]; |
| link->mac_type = lmac->lmac_type; |
| link->link_up = lmac->link_up; |
| link->duplex = lmac->last_duplex; |
| link->speed = lmac->last_speed; |
| } |
| EXPORT_SYMBOL(bgx_get_lmac_link_state); |
| |
| const u8 *bgx_get_lmac_mac(int node, int bgx_idx, int lmacid) |
| { |
| struct bgx *bgx = get_bgx(node, bgx_idx); |
| |
| if (bgx) |
| return bgx->lmac[lmacid].mac; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(bgx_get_lmac_mac); |
| |
| void bgx_set_lmac_mac(int node, int bgx_idx, int lmacid, const u8 *mac) |
| { |
| struct bgx *bgx = get_bgx(node, bgx_idx); |
| |
| if (!bgx) |
| return; |
| |
| ether_addr_copy(bgx->lmac[lmacid].mac, mac); |
| } |
| EXPORT_SYMBOL(bgx_set_lmac_mac); |
| |
| static void bgx_flush_dmac_cam_filter(struct bgx *bgx, int lmacid) |
| { |
| struct lmac *lmac = NULL; |
| u8 idx = 0; |
| |
| lmac = &bgx->lmac[lmacid]; |
| /* reset CAM filters */ |
| for (idx = 0; idx < lmac->dmacs_count; idx++) |
| bgx_reg_write(bgx, 0, BGX_CMR_RX_DMACX_CAM + |
| ((lmacid * lmac->dmacs_count) + idx) * |
| sizeof(u64), 0); |
| } |
| |
| static void bgx_lmac_remove_filters(struct lmac *lmac, u8 vf_id) |
| { |
| int i = 0; |
| |
| if (!lmac) |
| return; |
| |
| /* We've got reset filters request from some of attached VF, while the |
| * others might want to keep their configuration. So in this case lets |
| * iterate over all of configured filters and decrease number of |
| * referencies. if some addresses get zero refs remove them from list |
| */ |
| for (i = lmac->dmacs_cfg - 1; i >= 0; i--) { |
| lmac->dmacs[i].vf_map &= ~BIT_ULL(vf_id); |
| if (!lmac->dmacs[i].vf_map) { |
| lmac->dmacs_cfg--; |
| lmac->dmacs[i].dmac = 0; |
| lmac->dmacs[i].vf_map = 0; |
| } |
| } |
| } |
| |
| static int bgx_lmac_save_filter(struct lmac *lmac, u64 dmac, u8 vf_id) |
| { |
| u8 i = 0; |
| |
| if (!lmac) |
| return -1; |
| |
| /* At the same time we could have several VFs 'attached' to some |
| * particular LMAC, and each VF is represented as network interface |
| * for kernel. So from user perspective it should be possible to |
| * manipulate with its' (VF) receive modes. However from PF |
| * driver perspective we need to keep track of filter configurations |
| * for different VFs to prevent filter values dupes |
| */ |
| for (i = 0; i < lmac->dmacs_cfg; i++) { |
| if (lmac->dmacs[i].dmac == dmac) { |
| lmac->dmacs[i].vf_map |= BIT_ULL(vf_id); |
| return -1; |
| } |
| } |
| |
| if (!(lmac->dmacs_cfg < lmac->dmacs_count)) |
| return -1; |
| |
| /* keep it for further tracking */ |
| lmac->dmacs[lmac->dmacs_cfg].dmac = dmac; |
| lmac->dmacs[lmac->dmacs_cfg].vf_map = BIT_ULL(vf_id); |
| lmac->dmacs_cfg++; |
| return 0; |
| } |
| |
| static int bgx_set_dmac_cam_filter_mac(struct bgx *bgx, int lmacid, |
| u64 cam_dmac, u8 idx) |
| { |
| struct lmac *lmac = NULL; |
| u64 cfg = 0; |
| |
| /* skip zero addresses as meaningless */ |
| if (!cam_dmac || !bgx) |
| return -1; |
| |
| lmac = &bgx->lmac[lmacid]; |
| |
| /* configure DCAM filtering for designated LMAC */ |
| cfg = RX_DMACX_CAM_LMACID(lmacid & LMAC_ID_MASK) | |
| RX_DMACX_CAM_EN | cam_dmac; |
| bgx_reg_write(bgx, 0, BGX_CMR_RX_DMACX_CAM + |
| ((lmacid * lmac->dmacs_count) + idx) * sizeof(u64), cfg); |
| return 0; |
| } |
| |
| void bgx_set_dmac_cam_filter(int node, int bgx_idx, int lmacid, |
| u64 cam_dmac, u8 vf_id) |
| { |
| struct bgx *bgx = get_bgx(node, bgx_idx); |
| struct lmac *lmac = NULL; |
| |
| if (!bgx) |
| return; |
| |
| lmac = &bgx->lmac[lmacid]; |
| |
| if (!cam_dmac) |
| cam_dmac = ether_addr_to_u64(lmac->mac); |
| |
| /* since we might have several VFs attached to particular LMAC |
| * and kernel could call mcast config for each of them with the |
| * same MAC, check if requested MAC is already in filtering list and |
| * updare/prepare list of MACs to be applied later to HW filters |
| */ |
| bgx_lmac_save_filter(lmac, cam_dmac, vf_id); |
| } |
| EXPORT_SYMBOL(bgx_set_dmac_cam_filter); |
| |
| void bgx_set_xcast_mode(int node, int bgx_idx, int lmacid, u8 mode) |
| { |
| struct bgx *bgx = get_bgx(node, bgx_idx); |
| struct lmac *lmac = NULL; |
| u64 cfg = 0; |
| u8 i = 0; |
| |
| if (!bgx) |
| return; |
| |
| lmac = &bgx->lmac[lmacid]; |
| |
| cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_RX_DMAC_CTL); |
| if (mode & BGX_XCAST_BCAST_ACCEPT) |
| cfg |= BCAST_ACCEPT; |
| else |
| cfg &= ~BCAST_ACCEPT; |
| |
| /* disable all MCASTs and DMAC filtering */ |
| cfg &= ~(CAM_ACCEPT | BGX_MCAST_MODE(MCAST_MODE_MASK)); |
| |
| /* check requested bits and set filtergin mode appropriately */ |
| if (mode & (BGX_XCAST_MCAST_ACCEPT)) { |
| cfg |= (BGX_MCAST_MODE(MCAST_MODE_ACCEPT)); |
| } else if (mode & BGX_XCAST_MCAST_FILTER) { |
| cfg |= (BGX_MCAST_MODE(MCAST_MODE_CAM_FILTER) | CAM_ACCEPT); |
| for (i = 0; i < lmac->dmacs_cfg; i++) |
| bgx_set_dmac_cam_filter_mac(bgx, lmacid, |
| lmac->dmacs[i].dmac, i); |
| } |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_RX_DMAC_CTL, cfg); |
| } |
| EXPORT_SYMBOL(bgx_set_xcast_mode); |
| |
| void bgx_reset_xcast_mode(int node, int bgx_idx, int lmacid, u8 vf_id) |
| { |
| struct bgx *bgx = get_bgx(node, bgx_idx); |
| |
| if (!bgx) |
| return; |
| |
| bgx_lmac_remove_filters(&bgx->lmac[lmacid], vf_id); |
| bgx_flush_dmac_cam_filter(bgx, lmacid); |
| bgx_set_xcast_mode(node, bgx_idx, lmacid, |
| (BGX_XCAST_BCAST_ACCEPT | BGX_XCAST_MCAST_ACCEPT)); |
| } |
| EXPORT_SYMBOL(bgx_reset_xcast_mode); |
| |
| void bgx_lmac_rx_tx_enable(int node, int bgx_idx, int lmacid, bool enable) |
| { |
| struct bgx *bgx = get_bgx(node, bgx_idx); |
| struct lmac *lmac; |
| u64 cfg; |
| |
| if (!bgx) |
| return; |
| lmac = &bgx->lmac[lmacid]; |
| |
| cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); |
| if (enable) { |
| cfg |= CMR_PKT_RX_EN | CMR_PKT_TX_EN; |
| |
| /* enable TX FIFO Underflow interrupt */ |
| bgx_reg_modify(bgx, lmacid, BGX_GMP_GMI_TXX_INT_ENA_W1S, |
| GMI_TXX_INT_UNDFLW); |
| } else { |
| cfg &= ~(CMR_PKT_RX_EN | CMR_PKT_TX_EN); |
| |
| /* Disable TX FIFO Underflow interrupt */ |
| bgx_reg_modify(bgx, lmacid, BGX_GMP_GMI_TXX_INT_ENA_W1C, |
| GMI_TXX_INT_UNDFLW); |
| } |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); |
| |
| if (bgx->is_rgx) |
| xcv_setup_link(enable ? lmac->link_up : 0, lmac->last_speed); |
| } |
| EXPORT_SYMBOL(bgx_lmac_rx_tx_enable); |
| |
| /* Enables or disables timestamp insertion by BGX for Rx packets */ |
| void bgx_config_timestamping(int node, int bgx_idx, int lmacid, bool enable) |
| { |
| struct bgx *bgx = get_bgx(node, bgx_idx); |
| struct lmac *lmac; |
| u64 csr_offset, cfg; |
| |
| if (!bgx) |
| return; |
| |
| lmac = &bgx->lmac[lmacid]; |
| |
| if (lmac->lmac_type == BGX_MODE_SGMII || |
| lmac->lmac_type == BGX_MODE_QSGMII || |
| lmac->lmac_type == BGX_MODE_RGMII) |
| csr_offset = BGX_GMP_GMI_RXX_FRM_CTL; |
| else |
| csr_offset = BGX_SMUX_RX_FRM_CTL; |
| |
| cfg = bgx_reg_read(bgx, lmacid, csr_offset); |
| |
| if (enable) |
| cfg |= BGX_PKT_RX_PTP_EN; |
| else |
| cfg &= ~BGX_PKT_RX_PTP_EN; |
| bgx_reg_write(bgx, lmacid, csr_offset, cfg); |
| } |
| EXPORT_SYMBOL(bgx_config_timestamping); |
| |
| void bgx_lmac_get_pfc(int node, int bgx_idx, int lmacid, void *pause) |
| { |
| struct pfc *pfc = (struct pfc *)pause; |
| struct bgx *bgx = get_bgx(node, bgx_idx); |
| struct lmac *lmac; |
| u64 cfg; |
| |
| if (!bgx) |
| return; |
| lmac = &bgx->lmac[lmacid]; |
| if (lmac->is_sgmii) |
| return; |
| |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_CBFC_CTL); |
| pfc->fc_rx = cfg & RX_EN; |
| pfc->fc_tx = cfg & TX_EN; |
| pfc->autoneg = 0; |
| } |
| EXPORT_SYMBOL(bgx_lmac_get_pfc); |
| |
| void bgx_lmac_set_pfc(int node, int bgx_idx, int lmacid, void *pause) |
| { |
| struct pfc *pfc = (struct pfc *)pause; |
| struct bgx *bgx = get_bgx(node, bgx_idx); |
| struct lmac *lmac; |
| u64 cfg; |
| |
| if (!bgx) |
| return; |
| lmac = &bgx->lmac[lmacid]; |
| if (lmac->is_sgmii) |
| return; |
| |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_CBFC_CTL); |
| cfg &= ~(RX_EN | TX_EN); |
| cfg |= (pfc->fc_rx ? RX_EN : 0x00); |
| cfg |= (pfc->fc_tx ? TX_EN : 0x00); |
| bgx_reg_write(bgx, lmacid, BGX_SMUX_CBFC_CTL, cfg); |
| } |
| EXPORT_SYMBOL(bgx_lmac_set_pfc); |
| |
| static void bgx_sgmii_change_link_state(struct lmac *lmac) |
| { |
| struct bgx *bgx = lmac->bgx; |
| u64 cmr_cfg; |
| u64 port_cfg = 0; |
| u64 misc_ctl = 0; |
| bool tx_en, rx_en; |
| |
| cmr_cfg = bgx_reg_read(bgx, lmac->lmacid, BGX_CMRX_CFG); |
| tx_en = cmr_cfg & CMR_PKT_TX_EN; |
| rx_en = cmr_cfg & CMR_PKT_RX_EN; |
| cmr_cfg &= ~(CMR_PKT_RX_EN | CMR_PKT_TX_EN); |
| bgx_reg_write(bgx, lmac->lmacid, BGX_CMRX_CFG, cmr_cfg); |
| |
| /* Wait for BGX RX to be idle */ |
| if (bgx_poll_reg(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG, |
| GMI_PORT_CFG_RX_IDLE, false)) { |
| dev_err(&bgx->pdev->dev, "BGX%d LMAC%d GMI RX not idle\n", |
| bgx->bgx_id, lmac->lmacid); |
| return; |
| } |
| |
| /* Wait for BGX TX to be idle */ |
| if (bgx_poll_reg(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG, |
| GMI_PORT_CFG_TX_IDLE, false)) { |
| dev_err(&bgx->pdev->dev, "BGX%d LMAC%d GMI TX not idle\n", |
| bgx->bgx_id, lmac->lmacid); |
| return; |
| } |
| |
| port_cfg = bgx_reg_read(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG); |
| misc_ctl = bgx_reg_read(bgx, lmac->lmacid, BGX_GMP_PCS_MISCX_CTL); |
| |
| if (lmac->link_up) { |
| misc_ctl &= ~PCS_MISC_CTL_GMX_ENO; |
| port_cfg &= ~GMI_PORT_CFG_DUPLEX; |
| port_cfg |= (lmac->last_duplex << 2); |
| } else { |
| misc_ctl |= PCS_MISC_CTL_GMX_ENO; |
| } |
| |
| switch (lmac->last_speed) { |
| case 10: |
| port_cfg &= ~GMI_PORT_CFG_SPEED; /* speed 0 */ |
| port_cfg |= GMI_PORT_CFG_SPEED_MSB; /* speed_msb 1 */ |
| port_cfg &= ~GMI_PORT_CFG_SLOT_TIME; /* slottime 0 */ |
| misc_ctl &= ~PCS_MISC_CTL_SAMP_PT_MASK; |
| misc_ctl |= 50; /* samp_pt */ |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_SLOT, 64); |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_BURST, 0); |
| break; |
| case 100: |
| port_cfg &= ~GMI_PORT_CFG_SPEED; /* speed 0 */ |
| port_cfg &= ~GMI_PORT_CFG_SPEED_MSB; /* speed_msb 0 */ |
| port_cfg &= ~GMI_PORT_CFG_SLOT_TIME; /* slottime 0 */ |
| misc_ctl &= ~PCS_MISC_CTL_SAMP_PT_MASK; |
| misc_ctl |= 5; /* samp_pt */ |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_SLOT, 64); |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_BURST, 0); |
| break; |
| case 1000: |
| port_cfg |= GMI_PORT_CFG_SPEED; /* speed 1 */ |
| port_cfg &= ~GMI_PORT_CFG_SPEED_MSB; /* speed_msb 0 */ |
| port_cfg |= GMI_PORT_CFG_SLOT_TIME; /* slottime 1 */ |
| misc_ctl &= ~PCS_MISC_CTL_SAMP_PT_MASK; |
| misc_ctl |= 1; /* samp_pt */ |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_SLOT, 512); |
| if (lmac->last_duplex) |
| bgx_reg_write(bgx, lmac->lmacid, |
| BGX_GMP_GMI_TXX_BURST, 0); |
| else |
| bgx_reg_write(bgx, lmac->lmacid, |
| BGX_GMP_GMI_TXX_BURST, 8192); |
| break; |
| default: |
| break; |
| } |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_PCS_MISCX_CTL, misc_ctl); |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG, port_cfg); |
| |
| /* Restore CMR config settings */ |
| cmr_cfg |= (rx_en ? CMR_PKT_RX_EN : 0) | (tx_en ? CMR_PKT_TX_EN : 0); |
| bgx_reg_write(bgx, lmac->lmacid, BGX_CMRX_CFG, cmr_cfg); |
| |
| if (bgx->is_rgx && (cmr_cfg & (CMR_PKT_RX_EN | CMR_PKT_TX_EN))) |
| xcv_setup_link(lmac->link_up, lmac->last_speed); |
| } |
| |
| static void bgx_lmac_handler(struct net_device *netdev) |
| { |
| struct lmac *lmac = container_of(netdev, struct lmac, netdev); |
| struct phy_device *phydev; |
| int link_changed = 0; |
| |
| phydev = lmac->phydev; |
| |
| if (!phydev->link && lmac->last_link) |
| link_changed = -1; |
| |
| if (phydev->link && |
| (lmac->last_duplex != phydev->duplex || |
| lmac->last_link != phydev->link || |
| lmac->last_speed != phydev->speed)) { |
| link_changed = 1; |
| } |
| |
| lmac->last_link = phydev->link; |
| lmac->last_speed = phydev->speed; |
| lmac->last_duplex = phydev->duplex; |
| |
| if (!link_changed) |
| return; |
| |
| if (link_changed > 0) |
| lmac->link_up = true; |
| else |
| lmac->link_up = false; |
| |
| if (lmac->is_sgmii) |
| bgx_sgmii_change_link_state(lmac); |
| else |
| bgx_xaui_check_link(lmac); |
| } |
| |
| u64 bgx_get_rx_stats(int node, int bgx_idx, int lmac, int idx) |
| { |
| struct bgx *bgx; |
| |
| bgx = get_bgx(node, bgx_idx); |
| if (!bgx) |
| return 0; |
| |
| if (idx > 8) |
| lmac = 0; |
| return bgx_reg_read(bgx, lmac, BGX_CMRX_RX_STAT0 + (idx * 8)); |
| } |
| EXPORT_SYMBOL(bgx_get_rx_stats); |
| |
| u64 bgx_get_tx_stats(int node, int bgx_idx, int lmac, int idx) |
| { |
| struct bgx *bgx; |
| |
| bgx = get_bgx(node, bgx_idx); |
| if (!bgx) |
| return 0; |
| |
| return bgx_reg_read(bgx, lmac, BGX_CMRX_TX_STAT0 + (idx * 8)); |
| } |
| EXPORT_SYMBOL(bgx_get_tx_stats); |
| |
| /* Configure BGX LMAC in internal loopback mode */ |
| void bgx_lmac_internal_loopback(int node, int bgx_idx, |
| int lmac_idx, bool enable) |
| { |
| struct bgx *bgx; |
| struct lmac *lmac; |
| u64 cfg; |
| |
| bgx = get_bgx(node, bgx_idx); |
| if (!bgx) |
| return; |
| |
| lmac = &bgx->lmac[lmac_idx]; |
| if (lmac->is_sgmii) { |
| cfg = bgx_reg_read(bgx, lmac_idx, BGX_GMP_PCS_MRX_CTL); |
| if (enable) |
| cfg |= PCS_MRX_CTL_LOOPBACK1; |
| else |
| cfg &= ~PCS_MRX_CTL_LOOPBACK1; |
| bgx_reg_write(bgx, lmac_idx, BGX_GMP_PCS_MRX_CTL, cfg); |
| } else { |
| cfg = bgx_reg_read(bgx, lmac_idx, BGX_SPUX_CONTROL1); |
| if (enable) |
| cfg |= SPU_CTL_LOOPBACK; |
| else |
| cfg &= ~SPU_CTL_LOOPBACK; |
| bgx_reg_write(bgx, lmac_idx, BGX_SPUX_CONTROL1, cfg); |
| } |
| } |
| EXPORT_SYMBOL(bgx_lmac_internal_loopback); |
| |
| static int bgx_lmac_sgmii_init(struct bgx *bgx, struct lmac *lmac) |
| { |
| int lmacid = lmac->lmacid; |
| u64 cfg; |
| |
| bgx_reg_modify(bgx, lmacid, BGX_GMP_GMI_TXX_THRESH, 0x30); |
| /* max packet size */ |
| bgx_reg_modify(bgx, lmacid, BGX_GMP_GMI_RXX_JABBER, MAX_FRAME_SIZE); |
| |
| /* Disable frame alignment if using preamble */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_GMP_GMI_TXX_APPEND); |
| if (cfg & 1) |
| bgx_reg_write(bgx, lmacid, BGX_GMP_GMI_TXX_SGMII_CTL, 0); |
| |
| /* Enable lmac */ |
| bgx_reg_modify(bgx, lmacid, BGX_CMRX_CFG, CMR_EN); |
| |
| /* PCS reset */ |
| bgx_reg_modify(bgx, lmacid, BGX_GMP_PCS_MRX_CTL, PCS_MRX_CTL_RESET); |
| if (bgx_poll_reg(bgx, lmacid, BGX_GMP_PCS_MRX_CTL, |
| PCS_MRX_CTL_RESET, true)) { |
| dev_err(&bgx->pdev->dev, "BGX PCS reset not completed\n"); |
| return -1; |
| } |
| |
| /* power down, reset autoneg, autoneg enable */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_GMP_PCS_MRX_CTL); |
| cfg &= ~PCS_MRX_CTL_PWR_DN; |
| cfg |= PCS_MRX_CTL_RST_AN; |
| if (lmac->phydev) { |
| cfg |= PCS_MRX_CTL_AN_EN; |
| } else { |
| /* In scenarios where PHY driver is not present or it's a |
| * non-standard PHY, FW sets AN_EN to inform Linux driver |
| * to do auto-neg and link polling or not. |
| */ |
| if (cfg & PCS_MRX_CTL_AN_EN) |
| lmac->autoneg = true; |
| } |
| bgx_reg_write(bgx, lmacid, BGX_GMP_PCS_MRX_CTL, cfg); |
| |
| if (lmac->lmac_type == BGX_MODE_QSGMII) { |
| /* Disable disparity check for QSGMII */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_GMP_PCS_MISCX_CTL); |
| cfg &= ~PCS_MISC_CTL_DISP_EN; |
| bgx_reg_write(bgx, lmacid, BGX_GMP_PCS_MISCX_CTL, cfg); |
| return 0; |
| } |
| |
| if ((lmac->lmac_type == BGX_MODE_SGMII) && lmac->phydev) { |
| if (bgx_poll_reg(bgx, lmacid, BGX_GMP_PCS_MRX_STATUS, |
| PCS_MRX_STATUS_AN_CPT, false)) { |
| dev_err(&bgx->pdev->dev, "BGX AN_CPT not completed\n"); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int bgx_lmac_xaui_init(struct bgx *bgx, struct lmac *lmac) |
| { |
| u64 cfg; |
| int lmacid = lmac->lmacid; |
| |
| /* Reset SPU */ |
| bgx_reg_modify(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_RESET); |
| if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_RESET, true)) { |
| dev_err(&bgx->pdev->dev, "BGX SPU reset not completed\n"); |
| return -1; |
| } |
| |
| /* Disable LMAC */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); |
| cfg &= ~CMR_EN; |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); |
| |
| bgx_reg_modify(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_LOW_POWER); |
| /* Set interleaved running disparity for RXAUI */ |
| if (lmac->lmac_type == BGX_MODE_RXAUI) |
| bgx_reg_modify(bgx, lmacid, BGX_SPUX_MISC_CONTROL, |
| SPU_MISC_CTL_INTLV_RDISP); |
| |
| /* Clear receive packet disable */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_MISC_CONTROL); |
| cfg &= ~SPU_MISC_CTL_RX_DIS; |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_MISC_CONTROL, cfg); |
| |
| /* clear all interrupts */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_RX_INT); |
| bgx_reg_write(bgx, lmacid, BGX_SMUX_RX_INT, cfg); |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_TX_INT); |
| bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_INT, cfg); |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_INT, cfg); |
| |
| if (lmac->use_training) { |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LP_CUP, 0x00); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LD_CUP, 0x00); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LD_REP, 0x00); |
| /* training enable */ |
| bgx_reg_modify(bgx, lmacid, |
| BGX_SPUX_BR_PMD_CRTL, SPU_PMD_CRTL_TRAIN_EN); |
| } |
| |
| /* Append FCS to each packet */ |
| bgx_reg_modify(bgx, lmacid, BGX_SMUX_TX_APPEND, SMU_TX_APPEND_FCS_D); |
| |
| /* Disable forward error correction */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_FEC_CONTROL); |
| cfg &= ~SPU_FEC_CTL_FEC_EN; |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_FEC_CONTROL, cfg); |
| |
| /* Disable autoneg */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_AN_CONTROL); |
| cfg = cfg & ~(SPU_AN_CTL_AN_EN | SPU_AN_CTL_XNP_EN); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_AN_CONTROL, cfg); |
| |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_AN_ADV); |
| if (lmac->lmac_type == BGX_MODE_10G_KR) |
| cfg |= (1 << 23); |
| else if (lmac->lmac_type == BGX_MODE_40G_KR) |
| cfg |= (1 << 24); |
| else |
| cfg &= ~((1 << 23) | (1 << 24)); |
| cfg = cfg & (~((1ULL << 25) | (1ULL << 22) | (1ULL << 12))); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_AN_ADV, cfg); |
| |
| cfg = bgx_reg_read(bgx, 0, BGX_SPU_DBG_CONTROL); |
| cfg &= ~SPU_DBG_CTL_AN_ARB_LINK_CHK_EN; |
| bgx_reg_write(bgx, 0, BGX_SPU_DBG_CONTROL, cfg); |
| |
| /* Enable lmac */ |
| bgx_reg_modify(bgx, lmacid, BGX_CMRX_CFG, CMR_EN); |
| |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_CONTROL1); |
| cfg &= ~SPU_CTL_LOW_POWER; |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_CONTROL1, cfg); |
| |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_TX_CTL); |
| cfg &= ~SMU_TX_CTL_UNI_EN; |
| cfg |= SMU_TX_CTL_DIC_EN; |
| bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_CTL, cfg); |
| |
| /* Enable receive and transmission of pause frames */ |
| bgx_reg_write(bgx, lmacid, BGX_SMUX_CBFC_CTL, ((0xffffULL << 32) | |
| BCK_EN | DRP_EN | TX_EN | RX_EN)); |
| /* Configure pause time and interval */ |
| bgx_reg_write(bgx, lmacid, |
| BGX_SMUX_TX_PAUSE_PKT_TIME, DEFAULT_PAUSE_TIME); |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_TX_PAUSE_PKT_INTERVAL); |
| cfg &= ~0xFFFFull; |
| bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_PAUSE_PKT_INTERVAL, |
| cfg | (DEFAULT_PAUSE_TIME - 0x1000)); |
| bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_PAUSE_ZERO, 0x01); |
| |
| /* take lmac_count into account */ |
| bgx_reg_modify(bgx, lmacid, BGX_SMUX_TX_THRESH, (0x100 - 1)); |
| /* max packet size */ |
| bgx_reg_modify(bgx, lmacid, BGX_SMUX_RX_JABBER, MAX_FRAME_SIZE); |
| |
| return 0; |
| } |
| |
| static int bgx_xaui_check_link(struct lmac *lmac) |
| { |
| struct bgx *bgx = lmac->bgx; |
| int lmacid = lmac->lmacid; |
| int lmac_type = lmac->lmac_type; |
| u64 cfg; |
| |
| if (lmac->use_training) { |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT); |
| if (!(cfg & (1ull << 13))) { |
| cfg = (1ull << 13) | (1ull << 14); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_INT, cfg); |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_BR_PMD_CRTL); |
| cfg |= (1ull << 0); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_CRTL, cfg); |
| return -1; |
| } |
| } |
| |
| /* wait for PCS to come out of reset */ |
| if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_RESET, true)) { |
| dev_err(&bgx->pdev->dev, "BGX SPU reset not completed\n"); |
| return -1; |
| } |
| |
| if ((lmac_type == BGX_MODE_10G_KR) || (lmac_type == BGX_MODE_XFI) || |
| (lmac_type == BGX_MODE_40G_KR) || (lmac_type == BGX_MODE_XLAUI)) { |
| if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_BR_STATUS1, |
| SPU_BR_STATUS_BLK_LOCK, false)) { |
| dev_err(&bgx->pdev->dev, |
| "SPU_BR_STATUS_BLK_LOCK not completed\n"); |
| return -1; |
| } |
| } else { |
| if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_BX_STATUS, |
| SPU_BX_STATUS_RX_ALIGN, false)) { |
| dev_err(&bgx->pdev->dev, |
| "SPU_BX_STATUS_RX_ALIGN not completed\n"); |
| return -1; |
| } |
| } |
| |
| /* Clear rcvflt bit (latching high) and read it back */ |
| if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) |
| bgx_reg_modify(bgx, lmacid, |
| BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT); |
| if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) { |
| dev_err(&bgx->pdev->dev, "Receive fault, retry training\n"); |
| if (lmac->use_training) { |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT); |
| if (!(cfg & (1ull << 13))) { |
| cfg = (1ull << 13) | (1ull << 14); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_INT, cfg); |
| cfg = bgx_reg_read(bgx, lmacid, |
| BGX_SPUX_BR_PMD_CRTL); |
| cfg |= (1ull << 0); |
| bgx_reg_write(bgx, lmacid, |
| BGX_SPUX_BR_PMD_CRTL, cfg); |
| return -1; |
| } |
| } |
| return -1; |
| } |
| |
| /* Wait for BGX RX to be idle */ |
| if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_CTL, SMU_CTL_RX_IDLE, false)) { |
| dev_err(&bgx->pdev->dev, "SMU RX not idle\n"); |
| return -1; |
| } |
| |
| /* Wait for BGX TX to be idle */ |
| if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_CTL, SMU_CTL_TX_IDLE, false)) { |
| dev_err(&bgx->pdev->dev, "SMU TX not idle\n"); |
| return -1; |
| } |
| |
| /* Check for MAC RX faults */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_RX_CTL); |
| /* 0 - Link is okay, 1 - Local fault, 2 - Remote fault */ |
| cfg &= SMU_RX_CTL_STATUS; |
| if (!cfg) |
| return 0; |
| |
| /* Rx local/remote fault seen. |
| * Do lmac reinit to see if condition recovers |
| */ |
| bgx_lmac_xaui_init(bgx, lmac); |
| |
| return -1; |
| } |
| |
| static void bgx_poll_for_sgmii_link(struct lmac *lmac) |
| { |
| u64 pcs_link, an_result; |
| u8 speed; |
| |
| pcs_link = bgx_reg_read(lmac->bgx, lmac->lmacid, |
| BGX_GMP_PCS_MRX_STATUS); |
| |
| /*Link state bit is sticky, read it again*/ |
| if (!(pcs_link & PCS_MRX_STATUS_LINK)) |
| pcs_link = bgx_reg_read(lmac->bgx, lmac->lmacid, |
| BGX_GMP_PCS_MRX_STATUS); |
| |
| if (bgx_poll_reg(lmac->bgx, lmac->lmacid, BGX_GMP_PCS_MRX_STATUS, |
| PCS_MRX_STATUS_AN_CPT, false)) { |
| lmac->link_up = false; |
| lmac->last_speed = SPEED_UNKNOWN; |
| lmac->last_duplex = DUPLEX_UNKNOWN; |
| goto next_poll; |
| } |
| |
| lmac->link_up = ((pcs_link & PCS_MRX_STATUS_LINK) != 0) ? true : false; |
| an_result = bgx_reg_read(lmac->bgx, lmac->lmacid, |
| BGX_GMP_PCS_ANX_AN_RESULTS); |
| |
| speed = (an_result >> 3) & 0x3; |
| lmac->last_duplex = (an_result >> 1) & 0x1; |
| switch (speed) { |
| case 0: |
| lmac->last_speed = SPEED_10; |
| break; |
| case 1: |
| lmac->last_speed = SPEED_100; |
| break; |
| case 2: |
| lmac->last_speed = SPEED_1000; |
| break; |
| default: |
| lmac->link_up = false; |
| lmac->last_speed = SPEED_UNKNOWN; |
| lmac->last_duplex = DUPLEX_UNKNOWN; |
| break; |
| } |
| |
| next_poll: |
| |
| if (lmac->last_link != lmac->link_up) { |
| if (lmac->link_up) |
| bgx_sgmii_change_link_state(lmac); |
| lmac->last_link = lmac->link_up; |
| } |
| |
| queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 3); |
| } |
| |
| static void bgx_poll_for_link(struct work_struct *work) |
| { |
| struct lmac *lmac; |
| u64 spu_link, smu_link; |
| |
| lmac = container_of(work, struct lmac, dwork.work); |
| if (lmac->is_sgmii) { |
| bgx_poll_for_sgmii_link(lmac); |
| return; |
| } |
| |
| /* Receive link is latching low. Force it high and verify it */ |
| bgx_reg_modify(lmac->bgx, lmac->lmacid, |
| BGX_SPUX_STATUS1, SPU_STATUS1_RCV_LNK); |
| bgx_poll_reg(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1, |
| SPU_STATUS1_RCV_LNK, false); |
| |
| spu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1); |
| smu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SMUX_RX_CTL); |
| |
| if ((spu_link & SPU_STATUS1_RCV_LNK) && |
| !(smu_link & SMU_RX_CTL_STATUS)) { |
| lmac->link_up = true; |
| if (lmac->lmac_type == BGX_MODE_XLAUI) |
| lmac->last_speed = SPEED_40000; |
| else |
| lmac->last_speed = SPEED_10000; |
| lmac->last_duplex = DUPLEX_FULL; |
| } else { |
| lmac->link_up = false; |
| lmac->last_speed = SPEED_UNKNOWN; |
| lmac->last_duplex = DUPLEX_UNKNOWN; |
| } |
| |
| if (lmac->last_link != lmac->link_up) { |
| if (lmac->link_up) { |
| if (bgx_xaui_check_link(lmac)) { |
| /* Errors, clear link_up state */ |
| lmac->link_up = false; |
| lmac->last_speed = SPEED_UNKNOWN; |
| lmac->last_duplex = DUPLEX_UNKNOWN; |
| } |
| } |
| lmac->last_link = lmac->link_up; |
| } |
| |
| queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 2); |
| } |
| |
| static int phy_interface_mode(u8 lmac_type) |
| { |
| if (lmac_type == BGX_MODE_QSGMII) |
| return PHY_INTERFACE_MODE_QSGMII; |
| if (lmac_type == BGX_MODE_RGMII) |
| return PHY_INTERFACE_MODE_RGMII_RXID; |
| |
| return PHY_INTERFACE_MODE_SGMII; |
| } |
| |
| static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid) |
| { |
| struct lmac *lmac; |
| u64 cfg; |
| |
| lmac = &bgx->lmac[lmacid]; |
| lmac->bgx = bgx; |
| |
| if ((lmac->lmac_type == BGX_MODE_SGMII) || |
| (lmac->lmac_type == BGX_MODE_QSGMII) || |
| (lmac->lmac_type == BGX_MODE_RGMII)) { |
| lmac->is_sgmii = true; |
| if (bgx_lmac_sgmii_init(bgx, lmac)) |
| return -1; |
| } else { |
| lmac->is_sgmii = false; |
| if (bgx_lmac_xaui_init(bgx, lmac)) |
| return -1; |
| } |
| |
| if (lmac->is_sgmii) { |
| cfg = bgx_reg_read(bgx, lmacid, BGX_GMP_GMI_TXX_APPEND); |
| cfg |= ((1ull << 2) | (1ull << 1)); /* FCS and PAD */ |
| bgx_reg_modify(bgx, lmacid, BGX_GMP_GMI_TXX_APPEND, cfg); |
| bgx_reg_write(bgx, lmacid, BGX_GMP_GMI_TXX_MIN_PKT, 60 - 1); |
| } else { |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_TX_APPEND); |
| cfg |= ((1ull << 2) | (1ull << 1)); /* FCS and PAD */ |
| bgx_reg_modify(bgx, lmacid, BGX_SMUX_TX_APPEND, cfg); |
| bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_MIN_PKT, 60 + 4); |
| } |
| |
| /* actual number of filters available to exact LMAC */ |
| lmac->dmacs_count = (RX_DMAC_COUNT / bgx->lmac_count); |
| lmac->dmacs = kcalloc(lmac->dmacs_count, sizeof(*lmac->dmacs), |
| GFP_KERNEL); |
| if (!lmac->dmacs) |
| return -ENOMEM; |
| |
| /* Enable lmac */ |
| bgx_reg_modify(bgx, lmacid, BGX_CMRX_CFG, CMR_EN); |
| |
| /* Restore default cfg, incase low level firmware changed it */ |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_RX_DMAC_CTL, 0x03); |
| |
| if ((lmac->lmac_type != BGX_MODE_XFI) && |
| (lmac->lmac_type != BGX_MODE_XLAUI) && |
| (lmac->lmac_type != BGX_MODE_40G_KR) && |
| (lmac->lmac_type != BGX_MODE_10G_KR)) { |
| if (!lmac->phydev) { |
| if (lmac->autoneg) { |
| bgx_reg_write(bgx, lmacid, |
| BGX_GMP_PCS_LINKX_TIMER, |
| PCS_LINKX_TIMER_COUNT); |
| goto poll; |
| } else { |
| /* Default to below link speed and duplex */ |
| lmac->link_up = true; |
| lmac->last_speed = SPEED_1000; |
| lmac->last_duplex = DUPLEX_FULL; |
| bgx_sgmii_change_link_state(lmac); |
| return 0; |
| } |
| } |
| lmac->phydev->dev_flags = 0; |
| |
| if (phy_connect_direct(&lmac->netdev, lmac->phydev, |
| bgx_lmac_handler, |
| phy_interface_mode(lmac->lmac_type))) |
| return -ENODEV; |
| |
| phy_start(lmac->phydev); |
| return 0; |
| } |
| |
| poll: |
| lmac->check_link = alloc_workqueue("check_link", WQ_UNBOUND | |
| WQ_MEM_RECLAIM, 1); |
| if (!lmac->check_link) |
| return -ENOMEM; |
| INIT_DELAYED_WORK(&lmac->dwork, bgx_poll_for_link); |
| queue_delayed_work(lmac->check_link, &lmac->dwork, 0); |
| |
| return 0; |
| } |
| |
| static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid) |
| { |
| struct lmac *lmac; |
| u64 cfg; |
| |
| lmac = &bgx->lmac[lmacid]; |
| if (lmac->check_link) { |
| /* Destroy work queue */ |
| cancel_delayed_work_sync(&lmac->dwork); |
| destroy_workqueue(lmac->check_link); |
| } |
| |
| /* Disable packet reception */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); |
| cfg &= ~CMR_PKT_RX_EN; |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); |
| |
| /* Give chance for Rx/Tx FIFO to get drained */ |
| bgx_poll_reg(bgx, lmacid, BGX_CMRX_RX_FIFO_LEN, (u64)0x1FFF, true); |
| bgx_poll_reg(bgx, lmacid, BGX_CMRX_TX_FIFO_LEN, (u64)0x3FFF, true); |
| |
| /* Disable packet transmission */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); |
| cfg &= ~CMR_PKT_TX_EN; |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); |
| |
| /* Disable serdes lanes */ |
| if (!lmac->is_sgmii) |
| bgx_reg_modify(bgx, lmacid, |
| BGX_SPUX_CONTROL1, SPU_CTL_LOW_POWER); |
| else |
| bgx_reg_modify(bgx, lmacid, |
| BGX_GMP_PCS_MRX_CTL, PCS_MRX_CTL_PWR_DN); |
| |
| /* Disable LMAC */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); |
| cfg &= ~CMR_EN; |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); |
| |
| bgx_flush_dmac_cam_filter(bgx, lmacid); |
| kfree(lmac->dmacs); |
| |
| if ((lmac->lmac_type != BGX_MODE_XFI) && |
| (lmac->lmac_type != BGX_MODE_XLAUI) && |
| (lmac->lmac_type != BGX_MODE_40G_KR) && |
| (lmac->lmac_type != BGX_MODE_10G_KR) && lmac->phydev) |
| phy_disconnect(lmac->phydev); |
| |
| lmac->phydev = NULL; |
| } |
| |
| static void bgx_init_hw(struct bgx *bgx) |
| { |
| int i; |
| struct lmac *lmac; |
| |
| bgx_reg_modify(bgx, 0, BGX_CMR_GLOBAL_CFG, CMR_GLOBAL_CFG_FCS_STRIP); |
| if (bgx_reg_read(bgx, 0, BGX_CMR_BIST_STATUS)) |
| dev_err(&bgx->pdev->dev, "BGX%d BIST failed\n", bgx->bgx_id); |
| |
| /* Set lmac type and lane2serdes mapping */ |
| for (i = 0; i < bgx->lmac_count; i++) { |
| lmac = &bgx->lmac[i]; |
| bgx_reg_write(bgx, i, BGX_CMRX_CFG, |
| (lmac->lmac_type << 8) | lmac->lane_to_sds); |
| bgx->lmac[i].lmacid_bd = lmac_count; |
| lmac_count++; |
| } |
| |
| bgx_reg_write(bgx, 0, BGX_CMR_TX_LMACS, bgx->lmac_count); |
| bgx_reg_write(bgx, 0, BGX_CMR_RX_LMACS, bgx->lmac_count); |
| |
| /* Set the backpressure AND mask */ |
| for (i = 0; i < bgx->lmac_count; i++) |
| bgx_reg_modify(bgx, 0, BGX_CMR_CHAN_MSK_AND, |
| ((1ULL << MAX_BGX_CHANS_PER_LMAC) - 1) << |
| (i * MAX_BGX_CHANS_PER_LMAC)); |
| |
| /* Disable all MAC filtering */ |
| for (i = 0; i < RX_DMAC_COUNT; i++) |
| bgx_reg_write(bgx, 0, BGX_CMR_RX_DMACX_CAM + (i * 8), 0x00); |
| |
| /* Disable MAC steering (NCSI traffic) */ |
| for (i = 0; i < RX_TRAFFIC_STEER_RULE_COUNT; i++) |
| bgx_reg_write(bgx, 0, BGX_CMR_RX_STEERING + (i * 8), 0x00); |
| } |
| |
| static u8 bgx_get_lane2sds_cfg(struct bgx *bgx, struct lmac *lmac) |
| { |
| return (u8)(bgx_reg_read(bgx, lmac->lmacid, BGX_CMRX_CFG) & 0xFF); |
| } |
| |
| static void bgx_print_qlm_mode(struct bgx *bgx, u8 lmacid) |
| { |
| struct device *dev = &bgx->pdev->dev; |
| struct lmac *lmac; |
| char str[27]; |
| |
| if (!bgx->is_dlm && lmacid) |
| return; |
| |
| lmac = &bgx->lmac[lmacid]; |
| if (!bgx->is_dlm) |
| sprintf(str, "BGX%d QLM mode", bgx->bgx_id); |
| else |
| sprintf(str, "BGX%d LMAC%d mode", bgx->bgx_id, lmacid); |
| |
| switch (lmac->lmac_type) { |
| case BGX_MODE_SGMII: |
| dev_info(dev, "%s: SGMII\n", (char *)str); |
| break; |
| case BGX_MODE_XAUI: |
| dev_info(dev, "%s: XAUI\n", (char *)str); |
| break; |
| case BGX_MODE_RXAUI: |
| dev_info(dev, "%s: RXAUI\n", (char *)str); |
| break; |
| case BGX_MODE_XFI: |
| if (!lmac->use_training) |
| dev_info(dev, "%s: XFI\n", (char *)str); |
| else |
| dev_info(dev, "%s: 10G_KR\n", (char *)str); |
| break; |
| case BGX_MODE_XLAUI: |
| if (!lmac->use_training) |
| dev_info(dev, "%s: XLAUI\n", (char *)str); |
| else |
| dev_info(dev, "%s: 40G_KR4\n", (char *)str); |
| break; |
| case BGX_MODE_QSGMII: |
| dev_info(dev, "%s: QSGMII\n", (char *)str); |
| break; |
| case BGX_MODE_RGMII: |
| dev_info(dev, "%s: RGMII\n", (char *)str); |
| break; |
| case BGX_MODE_INVALID: |
| /* Nothing to do */ |
| break; |
| } |
| } |
| |
| static void lmac_set_lane2sds(struct bgx *bgx, struct lmac *lmac) |
| { |
| switch (lmac->lmac_type) { |
| case BGX_MODE_SGMII: |
| case BGX_MODE_XFI: |
| lmac->lane_to_sds = lmac->lmacid; |
| break; |
| case BGX_MODE_XAUI: |
| case BGX_MODE_XLAUI: |
| case BGX_MODE_RGMII: |
| lmac->lane_to_sds = 0xE4; |
| break; |
| case BGX_MODE_RXAUI: |
| lmac->lane_to_sds = (lmac->lmacid) ? 0xE : 0x4; |
| break; |
| case BGX_MODE_QSGMII: |
| /* There is no way to determine if DLM0/2 is QSGMII or |
| * DLM1/3 is configured to QSGMII as bootloader will |
| * configure all LMACs, so take whatever is configured |
| * by low level firmware. |
| */ |
| lmac->lane_to_sds = bgx_get_lane2sds_cfg(bgx, lmac); |
| break; |
| default: |
| lmac->lane_to_sds = 0; |
| break; |
| } |
| } |
| |
| static void lmac_set_training(struct bgx *bgx, struct lmac *lmac, int lmacid) |
| { |
| if ((lmac->lmac_type != BGX_MODE_10G_KR) && |
| (lmac->lmac_type != BGX_MODE_40G_KR)) { |
| lmac->use_training = false; |
| return; |
| } |
| |
| lmac->use_training = bgx_reg_read(bgx, lmacid, BGX_SPUX_BR_PMD_CRTL) & |
| SPU_PMD_CRTL_TRAIN_EN; |
| } |
| |
| static void bgx_set_lmac_config(struct bgx *bgx, u8 idx) |
| { |
| struct lmac *lmac; |
| u64 cmr_cfg; |
| u8 lmac_type; |
| u8 lane_to_sds; |
| |
| lmac = &bgx->lmac[idx]; |
| |
| if (!bgx->is_dlm || bgx->is_rgx) { |
| /* Read LMAC0 type to figure out QLM mode |
| * This is configured by low level firmware |
| */ |
| cmr_cfg = bgx_reg_read(bgx, 0, BGX_CMRX_CFG); |
| lmac->lmac_type = (cmr_cfg >> 8) & 0x07; |
| if (bgx->is_rgx) |
| lmac->lmac_type = BGX_MODE_RGMII; |
| lmac_set_training(bgx, lmac, 0); |
| lmac_set_lane2sds(bgx, lmac); |
| return; |
| } |
| |
| /* For DLMs or SLMs on 80/81/83xx so many lane configurations |
| * are possible and vary across boards. Also Kernel doesn't have |
| * any way to identify board type/info and since firmware does, |
| * just take lmac type and serdes lane config as is. |
| */ |
| cmr_cfg = bgx_reg_read(bgx, idx, BGX_CMRX_CFG); |
| lmac_type = (u8)((cmr_cfg >> 8) & 0x07); |
| lane_to_sds = (u8)(cmr_cfg & 0xFF); |
| /* Check if config is reset value */ |
| if ((lmac_type == 0) && (lane_to_sds == 0xE4)) |
| lmac->lmac_type = BGX_MODE_INVALID; |
| else |
| lmac->lmac_type = lmac_type; |
| lmac->lane_to_sds = lane_to_sds; |
| lmac_set_training(bgx, lmac, lmac->lmacid); |
| } |
| |
| static void bgx_get_qlm_mode(struct bgx *bgx) |
| { |
| struct lmac *lmac; |
| u8 idx; |
| |
| /* Init all LMAC's type to invalid */ |
| for (idx = 0; idx < bgx->max_lmac; idx++) { |
| lmac = &bgx->lmac[idx]; |
| lmac->lmacid = idx; |
| lmac->lmac_type = BGX_MODE_INVALID; |
| lmac->use_training = false; |
| } |
| |
| /* It is assumed that low level firmware sets this value */ |
| bgx->lmac_count = bgx_reg_read(bgx, 0, BGX_CMR_RX_LMACS) & 0x7; |
| if (bgx->lmac_count > bgx->max_lmac) |
| bgx->lmac_count = bgx->max_lmac; |
| |
| for (idx = 0; idx < bgx->lmac_count; idx++) { |
| bgx_set_lmac_config(bgx, idx); |
| bgx_print_qlm_mode(bgx, idx); |
| } |
| } |
| |
| #ifdef CONFIG_ACPI |
| |
| static int acpi_get_mac_address(struct device *dev, struct acpi_device *adev, |
| u8 *dst) |
| { |
| u8 mac[ETH_ALEN]; |
| int ret; |
| |
| ret = fwnode_get_mac_address(acpi_fwnode_handle(adev), mac); |
| if (ret) { |
| dev_err(dev, "MAC address invalid: %pM\n", mac); |
| return -EINVAL; |
| } |
| |
| dev_info(dev, "MAC address set to: %pM\n", mac); |
| |
| ether_addr_copy(dst, mac); |
| return 0; |
| } |
| |
| /* Currently only sets the MAC address. */ |
| static acpi_status bgx_acpi_register_phy(acpi_handle handle, |
| u32 lvl, void *context, void **rv) |
| { |
| struct bgx *bgx = context; |
| struct device *dev = &bgx->pdev->dev; |
| struct acpi_device *adev; |
| |
| if (acpi_bus_get_device(handle, &adev)) |
| goto out; |
| |
| acpi_get_mac_address(dev, adev, bgx->lmac[bgx->acpi_lmac_idx].mac); |
| |
| SET_NETDEV_DEV(&bgx->lmac[bgx->acpi_lmac_idx].netdev, dev); |
| |
| bgx->lmac[bgx->acpi_lmac_idx].lmacid = bgx->acpi_lmac_idx; |
| bgx->acpi_lmac_idx++; /* move to next LMAC */ |
| out: |
| return AE_OK; |
| } |
| |
| static acpi_status bgx_acpi_match_id(acpi_handle handle, u32 lvl, |
| void *context, void **ret_val) |
| { |
| struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL }; |
| struct bgx *bgx = context; |
| char bgx_sel[5]; |
| |
| snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id); |
| if (ACPI_FAILURE(acpi_get_name(handle, ACPI_SINGLE_NAME, &string))) { |
| pr_warn("Invalid link device\n"); |
| return AE_OK; |
| } |
| |
| if (strncmp(string.pointer, bgx_sel, 4)) |
| return AE_OK; |
| |
| acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, |
| bgx_acpi_register_phy, NULL, bgx, NULL); |
| |
| kfree(string.pointer); |
| return AE_CTRL_TERMINATE; |
| } |
| |
| static int bgx_init_acpi_phy(struct bgx *bgx) |
| { |
| acpi_get_devices(NULL, bgx_acpi_match_id, bgx, (void **)NULL); |
| return 0; |
| } |
| |
| #else |
| |
| static int bgx_init_acpi_phy(struct bgx *bgx) |
| { |
| return -ENODEV; |
| } |
| |
| #endif /* CONFIG_ACPI */ |
| |
| #if IS_ENABLED(CONFIG_OF_MDIO) |
| |
| static int bgx_init_of_phy(struct bgx *bgx) |
| { |
| struct fwnode_handle *fwn; |
| struct device_node *node = NULL; |
| u8 lmac = 0; |
| |
| device_for_each_child_node(&bgx->pdev->dev, fwn) { |
| struct phy_device *pd; |
| struct device_node *phy_np; |
| |
| /* Should always be an OF node. But if it is not, we |
| * cannot handle it, so exit the loop. |
| */ |
| node = to_of_node(fwn); |
| if (!node) |
| break; |
| |
| of_get_mac_address(node, bgx->lmac[lmac].mac); |
| |
| SET_NETDEV_DEV(&bgx->lmac[lmac].netdev, &bgx->pdev->dev); |
| bgx->lmac[lmac].lmacid = lmac; |
| |
| phy_np = of_parse_phandle(node, "phy-handle", 0); |
| /* If there is no phy or defective firmware presents |
| * this cortina phy, for which there is no driver |
| * support, ignore it. |
| */ |
| if (phy_np && |
| !of_device_is_compatible(phy_np, "cortina,cs4223-slice")) { |
| /* Wait until the phy drivers are available */ |
| pd = of_phy_find_device(phy_np); |
| if (!pd) |
| goto defer; |
| bgx->lmac[lmac].phydev = pd; |
| } |
| |
| lmac++; |
| if (lmac == bgx->max_lmac) { |
| of_node_put(node); |
| break; |
| } |
| } |
| return 0; |
| |
| defer: |
| /* We are bailing out, try not to leak device reference counts |
| * for phy devices we may have already found. |
| */ |
| while (lmac) { |
| if (bgx->lmac[lmac].phydev) { |
| put_device(&bgx->lmac[lmac].phydev->mdio.dev); |
| bgx->lmac[lmac].phydev = NULL; |
| } |
| lmac--; |
| } |
| of_node_put(node); |
| return -EPROBE_DEFER; |
| } |
| |
| #else |
| |
| static int bgx_init_of_phy(struct bgx *bgx) |
| { |
| return -ENODEV; |
| } |
| |
| #endif /* CONFIG_OF_MDIO */ |
| |
| static int bgx_init_phy(struct bgx *bgx) |
| { |
| if (!acpi_disabled) |
| return bgx_init_acpi_phy(bgx); |
| |
| return bgx_init_of_phy(bgx); |
| } |
| |
| static irqreturn_t bgx_intr_handler(int irq, void *data) |
| { |
| struct bgx *bgx = (struct bgx *)data; |
| u64 status, val; |
| int lmac; |
| |
| for (lmac = 0; lmac < bgx->lmac_count; lmac++) { |
| status = bgx_reg_read(bgx, lmac, BGX_GMP_GMI_TXX_INT); |
| if (status & GMI_TXX_INT_UNDFLW) { |
| pci_err(bgx->pdev, "BGX%d lmac%d UNDFLW\n", |
| bgx->bgx_id, lmac); |
| val = bgx_reg_read(bgx, lmac, BGX_CMRX_CFG); |
| val &= ~CMR_EN; |
| bgx_reg_write(bgx, lmac, BGX_CMRX_CFG, val); |
| val |= CMR_EN; |
| bgx_reg_write(bgx, lmac, BGX_CMRX_CFG, val); |
| } |
| /* clear interrupts */ |
| bgx_reg_write(bgx, lmac, BGX_GMP_GMI_TXX_INT, status); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void bgx_register_intr(struct pci_dev *pdev) |
| { |
| struct bgx *bgx = pci_get_drvdata(pdev); |
| int ret; |
| |
| ret = pci_alloc_irq_vectors(pdev, BGX_LMAC_VEC_OFFSET, |
| BGX_LMAC_VEC_OFFSET, PCI_IRQ_ALL_TYPES); |
| if (ret < 0) { |
| pci_err(pdev, "Req for #%d msix vectors failed\n", |
| BGX_LMAC_VEC_OFFSET); |
| return; |
| } |
| ret = pci_request_irq(pdev, GMPX_GMI_TX_INT, bgx_intr_handler, NULL, |
| bgx, "BGX%d", bgx->bgx_id); |
| if (ret) |
| pci_free_irq(pdev, GMPX_GMI_TX_INT, bgx); |
| } |
| |
| static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| int err; |
| struct device *dev = &pdev->dev; |
| struct bgx *bgx = NULL; |
| u8 lmac; |
| u16 sdevid; |
| |
| bgx = devm_kzalloc(dev, sizeof(*bgx), GFP_KERNEL); |
| if (!bgx) |
| return -ENOMEM; |
| bgx->pdev = pdev; |
| |
| pci_set_drvdata(pdev, bgx); |
| |
| err = pcim_enable_device(pdev); |
| if (err) { |
| pci_set_drvdata(pdev, NULL); |
| return dev_err_probe(dev, err, "Failed to enable PCI device\n"); |
| } |
| |
| err = pci_request_regions(pdev, DRV_NAME); |
| if (err) { |
| dev_err(dev, "PCI request regions failed 0x%x\n", err); |
| goto err_disable_device; |
| } |
| |
| /* MAP configuration registers */ |
| bgx->reg_base = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM, 0); |
| if (!bgx->reg_base) { |
| dev_err(dev, "BGX: Cannot map CSR memory space, aborting\n"); |
| err = -ENOMEM; |
| goto err_release_regions; |
| } |
| |
| set_max_bgx_per_node(pdev); |
| |
| pci_read_config_word(pdev, PCI_DEVICE_ID, &sdevid); |
| if (sdevid != PCI_DEVICE_ID_THUNDER_RGX) { |
| bgx->bgx_id = (pci_resource_start(pdev, |
| PCI_CFG_REG_BAR_NUM) >> 24) & BGX_ID_MASK; |
| bgx->bgx_id += nic_get_node_id(pdev) * max_bgx_per_node; |
| bgx->max_lmac = MAX_LMAC_PER_BGX; |
| bgx_vnic[bgx->bgx_id] = bgx; |
| } else { |
| bgx->is_rgx = true; |
| bgx->max_lmac = 1; |
| bgx->bgx_id = MAX_BGX_PER_CN81XX - 1; |
| bgx_vnic[bgx->bgx_id] = bgx; |
| xcv_init_hw(); |
| } |
| |
| /* On 81xx all are DLMs and on 83xx there are 3 BGX QLMs and one |
| * BGX i.e BGX2 can be split across 2 DLMs. |
| */ |
| pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &sdevid); |
| if ((sdevid == PCI_SUBSYS_DEVID_81XX_BGX) || |
| ((sdevid == PCI_SUBSYS_DEVID_83XX_BGX) && (bgx->bgx_id == 2))) |
| bgx->is_dlm = true; |
| |
| bgx_get_qlm_mode(bgx); |
| |
| err = bgx_init_phy(bgx); |
| if (err) |
| goto err_enable; |
| |
| bgx_init_hw(bgx); |
| |
| bgx_register_intr(pdev); |
| |
| /* Enable all LMACs */ |
| for (lmac = 0; lmac < bgx->lmac_count; lmac++) { |
| err = bgx_lmac_enable(bgx, lmac); |
| if (err) { |
| dev_err(dev, "BGX%d failed to enable lmac%d\n", |
| bgx->bgx_id, lmac); |
| while (lmac) |
| bgx_lmac_disable(bgx, --lmac); |
| goto err_enable; |
| } |
| } |
| |
| return 0; |
| |
| err_enable: |
| bgx_vnic[bgx->bgx_id] = NULL; |
| pci_free_irq(pdev, GMPX_GMI_TX_INT, bgx); |
| err_release_regions: |
| pci_release_regions(pdev); |
| err_disable_device: |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| return err; |
| } |
| |
| static void bgx_remove(struct pci_dev *pdev) |
| { |
| struct bgx *bgx = pci_get_drvdata(pdev); |
| u8 lmac; |
| |
| /* Disable all LMACs */ |
| for (lmac = 0; lmac < bgx->lmac_count; lmac++) |
| bgx_lmac_disable(bgx, lmac); |
| |
| pci_free_irq(pdev, GMPX_GMI_TX_INT, bgx); |
| |
| bgx_vnic[bgx->bgx_id] = NULL; |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| } |
| |
| static struct pci_driver bgx_driver = { |
| .name = DRV_NAME, |
| .id_table = bgx_id_table, |
| .probe = bgx_probe, |
| .remove = bgx_remove, |
| }; |
| |
| static int __init bgx_init_module(void) |
| { |
| pr_info("%s, ver %s\n", DRV_NAME, DRV_VERSION); |
| |
| return pci_register_driver(&bgx_driver); |
| } |
| |
| static void __exit bgx_cleanup_module(void) |
| { |
| pci_unregister_driver(&bgx_driver); |
| } |
| |
| module_init(bgx_init_module); |
| module_exit(bgx_cleanup_module); |