| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2015 Broadcom Corporation |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/of_address.h> |
| #include <linux/of_pci.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_platform.h> |
| #include <linux/phy/phy.h> |
| |
| #include "../pci.h" |
| #include "pcie-iproc.h" |
| |
| static const struct of_device_id iproc_pcie_of_match_table[] = { |
| { |
| .compatible = "brcm,iproc-pcie", |
| .data = (int *)IPROC_PCIE_PAXB, |
| }, { |
| .compatible = "brcm,iproc-pcie-paxb-v2", |
| .data = (int *)IPROC_PCIE_PAXB_V2, |
| }, { |
| .compatible = "brcm,iproc-pcie-paxc", |
| .data = (int *)IPROC_PCIE_PAXC, |
| }, { |
| .compatible = "brcm,iproc-pcie-paxc-v2", |
| .data = (int *)IPROC_PCIE_PAXC_V2, |
| }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table); |
| |
| static int iproc_pltfm_pcie_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct iproc_pcie *pcie; |
| struct device_node *np = dev->of_node; |
| struct resource reg; |
| struct pci_host_bridge *bridge; |
| int ret; |
| |
| bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie)); |
| if (!bridge) |
| return -ENOMEM; |
| |
| pcie = pci_host_bridge_priv(bridge); |
| |
| pcie->dev = dev; |
| pcie->type = (enum iproc_pcie_type) of_device_get_match_data(dev); |
| |
| ret = of_address_to_resource(np, 0, ®); |
| if (ret < 0) { |
| dev_err(dev, "unable to obtain controller resources\n"); |
| return ret; |
| } |
| |
| pcie->base = devm_pci_remap_cfgspace(dev, reg.start, |
| resource_size(®)); |
| if (!pcie->base) { |
| dev_err(dev, "unable to map controller registers\n"); |
| return -ENOMEM; |
| } |
| pcie->base_addr = reg.start; |
| |
| if (of_property_read_bool(np, "brcm,pcie-ob")) { |
| u32 val; |
| |
| ret = of_property_read_u32(np, "brcm,pcie-ob-axi-offset", |
| &val); |
| if (ret) { |
| dev_err(dev, |
| "missing brcm,pcie-ob-axi-offset property\n"); |
| return ret; |
| } |
| pcie->ob.axi_offset = val; |
| pcie->need_ob_cfg = true; |
| } |
| |
| /* |
| * DT nodes are not used by all platforms that use the iProc PCIe |
| * core driver. For platforms that require explicit inbound mapping |
| * configuration, "dma-ranges" would have been present in DT |
| */ |
| pcie->need_ib_cfg = of_property_read_bool(np, "dma-ranges"); |
| |
| /* PHY use is optional */ |
| pcie->phy = devm_phy_optional_get(dev, "pcie-phy"); |
| if (IS_ERR(pcie->phy)) |
| return PTR_ERR(pcie->phy); |
| |
| /* PAXC doesn't support legacy IRQs, skip mapping */ |
| switch (pcie->type) { |
| case IPROC_PCIE_PAXC: |
| case IPROC_PCIE_PAXC_V2: |
| pcie->map_irq = NULL; |
| break; |
| default: |
| break; |
| } |
| |
| ret = iproc_pcie_setup(pcie, &bridge->windows); |
| if (ret) { |
| dev_err(dev, "PCIe controller setup failed\n"); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, pcie); |
| return 0; |
| } |
| |
| static int iproc_pltfm_pcie_remove(struct platform_device *pdev) |
| { |
| struct iproc_pcie *pcie = platform_get_drvdata(pdev); |
| |
| return iproc_pcie_remove(pcie); |
| } |
| |
| static void iproc_pltfm_pcie_shutdown(struct platform_device *pdev) |
| { |
| struct iproc_pcie *pcie = platform_get_drvdata(pdev); |
| |
| iproc_pcie_shutdown(pcie); |
| } |
| |
| static struct platform_driver iproc_pltfm_pcie_driver = { |
| .driver = { |
| .name = "iproc-pcie", |
| .of_match_table = of_match_ptr(iproc_pcie_of_match_table), |
| }, |
| .probe = iproc_pltfm_pcie_probe, |
| .remove = iproc_pltfm_pcie_remove, |
| .shutdown = iproc_pltfm_pcie_shutdown, |
| }; |
| module_platform_driver(iproc_pltfm_pcie_driver); |
| |
| MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>"); |
| MODULE_DESCRIPTION("Broadcom iPROC PCIe platform driver"); |
| MODULE_LICENSE("GPL v2"); |