| /* |
| * Battery power supply driver for X-Powers AXP20X and AXP22X PMICs |
| * |
| * Copyright 2016 Free Electrons NextThing Co. |
| * Quentin Schulz <quentin.schulz@free-electrons.com> |
| * |
| * This driver is based on a previous upstreaming attempt by: |
| * Bruno Prémont <bonbons@linux-vserver.org> |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file "COPYING" in the main directory of this |
| * archive for more details. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <linux/time.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/consumer.h> |
| #include <linux/mfd/axp20x.h> |
| |
| #define AXP20X_PWR_STATUS_BAT_CHARGING BIT(2) |
| |
| #define AXP20X_PWR_OP_BATT_PRESENT BIT(5) |
| #define AXP20X_PWR_OP_BATT_ACTIVATED BIT(3) |
| |
| #define AXP209_FG_PERCENT GENMASK(6, 0) |
| #define AXP22X_FG_VALID BIT(7) |
| |
| #define AXP20X_CHRG_CTRL1_ENABLE BIT(7) |
| #define AXP20X_CHRG_CTRL1_TGT_VOLT GENMASK(6, 5) |
| #define AXP20X_CHRG_CTRL1_TGT_4_1V (0 << 5) |
| #define AXP20X_CHRG_CTRL1_TGT_4_15V (1 << 5) |
| #define AXP20X_CHRG_CTRL1_TGT_4_2V (2 << 5) |
| #define AXP20X_CHRG_CTRL1_TGT_4_36V (3 << 5) |
| |
| #define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5) |
| #define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5) |
| |
| #define AXP813_CHRG_CTRL1_TGT_4_35V (3 << 5) |
| |
| #define AXP20X_CHRG_CTRL1_TGT_CURR GENMASK(3, 0) |
| |
| #define AXP20X_V_OFF_MASK GENMASK(2, 0) |
| |
| struct axp20x_batt_ps; |
| |
| struct axp_data { |
| int ccc_scale; |
| int ccc_offset; |
| bool has_fg_valid; |
| int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val); |
| int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val); |
| }; |
| |
| struct axp20x_batt_ps { |
| struct regmap *regmap; |
| struct power_supply *batt; |
| struct device *dev; |
| struct iio_channel *batt_chrg_i; |
| struct iio_channel *batt_dischrg_i; |
| struct iio_channel *batt_v; |
| /* Maximum constant charge current */ |
| unsigned int max_ccc; |
| const struct axp_data *data; |
| }; |
| |
| static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, |
| int *val) |
| { |
| int ret, reg; |
| |
| ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®); |
| if (ret) |
| return ret; |
| |
| switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) { |
| case AXP20X_CHRG_CTRL1_TGT_4_1V: |
| *val = 4100000; |
| break; |
| case AXP20X_CHRG_CTRL1_TGT_4_15V: |
| *val = 4150000; |
| break; |
| case AXP20X_CHRG_CTRL1_TGT_4_2V: |
| *val = 4200000; |
| break; |
| case AXP20X_CHRG_CTRL1_TGT_4_36V: |
| *val = 4360000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, |
| int *val) |
| { |
| int ret, reg; |
| |
| ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®); |
| if (ret) |
| return ret; |
| |
| switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) { |
| case AXP20X_CHRG_CTRL1_TGT_4_1V: |
| *val = 4100000; |
| break; |
| case AXP20X_CHRG_CTRL1_TGT_4_2V: |
| *val = 4200000; |
| break; |
| case AXP22X_CHRG_CTRL1_TGT_4_22V: |
| *val = 4220000; |
| break; |
| case AXP22X_CHRG_CTRL1_TGT_4_24V: |
| *val = 4240000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, |
| int *val) |
| { |
| int ret, reg; |
| |
| ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®); |
| if (ret) |
| return ret; |
| |
| switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) { |
| case AXP20X_CHRG_CTRL1_TGT_4_1V: |
| *val = 4100000; |
| break; |
| case AXP20X_CHRG_CTRL1_TGT_4_15V: |
| *val = 4150000; |
| break; |
| case AXP20X_CHRG_CTRL1_TGT_4_2V: |
| *val = 4200000; |
| break; |
| case AXP813_CHRG_CTRL1_TGT_4_35V: |
| *val = 4350000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp, |
| int *val) |
| { |
| int ret; |
| |
| ret = regmap_read(axp->regmap, AXP20X_CHRG_CTRL1, val); |
| if (ret) |
| return ret; |
| |
| *val &= AXP20X_CHRG_CTRL1_TGT_CURR; |
| |
| *val = *val * axp->data->ccc_scale + axp->data->ccc_offset; |
| |
| return 0; |
| } |
| |
| static int axp20x_battery_get_prop(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); |
| struct iio_channel *chan; |
| int ret = 0, reg, val1; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_PRESENT: |
| case POWER_SUPPLY_PROP_ONLINE: |
| ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE, |
| ®); |
| if (ret) |
| return ret; |
| |
| val->intval = !!(reg & AXP20X_PWR_OP_BATT_PRESENT); |
| break; |
| |
| case POWER_SUPPLY_PROP_STATUS: |
| ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS, |
| ®); |
| if (ret) |
| return ret; |
| |
| if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) { |
| val->intval = POWER_SUPPLY_STATUS_CHARGING; |
| return 0; |
| } |
| |
| ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i, |
| &val1); |
| if (ret) |
| return ret; |
| |
| if (val1) { |
| val->intval = POWER_SUPPLY_STATUS_DISCHARGING; |
| return 0; |
| } |
| |
| ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &val1); |
| if (ret) |
| return ret; |
| |
| /* |
| * Fuel Gauge data takes 7 bits but the stored value seems to be |
| * directly the raw percentage without any scaling to 7 bits. |
| */ |
| if ((val1 & AXP209_FG_PERCENT) == 100) |
| val->intval = POWER_SUPPLY_STATUS_FULL; |
| else |
| val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| break; |
| |
| case POWER_SUPPLY_PROP_HEALTH: |
| ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE, |
| &val1); |
| if (ret) |
| return ret; |
| |
| if (val1 & AXP20X_PWR_OP_BATT_ACTIVATED) { |
| val->intval = POWER_SUPPLY_HEALTH_DEAD; |
| return 0; |
| } |
| |
| val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| break; |
| |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| ret = axp20x_get_constant_charge_current(axp20x_batt, |
| &val->intval); |
| if (ret) |
| return ret; |
| break; |
| |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| val->intval = axp20x_batt->max_ccc; |
| break; |
| |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS, |
| ®); |
| if (ret) |
| return ret; |
| |
| if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) |
| chan = axp20x_batt->batt_chrg_i; |
| else |
| chan = axp20x_batt->batt_dischrg_i; |
| |
| ret = iio_read_channel_processed(chan, &val->intval); |
| if (ret) |
| return ret; |
| |
| /* IIO framework gives mA but Power Supply framework gives uA */ |
| val->intval *= 1000; |
| break; |
| |
| case POWER_SUPPLY_PROP_CAPACITY: |
| /* When no battery is present, return capacity is 100% */ |
| ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE, |
| ®); |
| if (ret) |
| return ret; |
| |
| if (!(reg & AXP20X_PWR_OP_BATT_PRESENT)) { |
| val->intval = 100; |
| return 0; |
| } |
| |
| ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, ®); |
| if (ret) |
| return ret; |
| |
| if (axp20x_batt->data->has_fg_valid && !(reg & AXP22X_FG_VALID)) |
| return -EINVAL; |
| |
| /* |
| * Fuel Gauge data takes 7 bits but the stored value seems to be |
| * directly the raw percentage without any scaling to 7 bits. |
| */ |
| val->intval = reg & AXP209_FG_PERCENT; |
| break; |
| |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: |
| return axp20x_batt->data->get_max_voltage(axp20x_batt, |
| &val->intval); |
| |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: |
| ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, ®); |
| if (ret) |
| return ret; |
| |
| val->intval = 2600000 + 100000 * (reg & AXP20X_V_OFF_MASK); |
| break; |
| |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| ret = iio_read_channel_processed(axp20x_batt->batt_v, |
| &val->intval); |
| if (ret) |
| return ret; |
| |
| /* IIO framework gives mV but Power Supply framework gives uV */ |
| val->intval *= 1000; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, |
| int val) |
| { |
| switch (val) { |
| case 4100000: |
| val = AXP20X_CHRG_CTRL1_TGT_4_1V; |
| break; |
| |
| case 4200000: |
| val = AXP20X_CHRG_CTRL1_TGT_4_2V; |
| break; |
| |
| default: |
| /* |
| * AXP20x max voltage can be set to 4.36V and AXP22X max voltage |
| * can be set to 4.22V and 4.24V, but these voltages are too |
| * high for Lithium based batteries (AXP PMICs are supposed to |
| * be used with these kinds of battery). |
| */ |
| return -EINVAL; |
| } |
| |
| return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, |
| AXP20X_CHRG_CTRL1_TGT_VOLT, val); |
| } |
| |
| static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, |
| int val) |
| { |
| switch (val) { |
| case 4100000: |
| val = AXP20X_CHRG_CTRL1_TGT_4_1V; |
| break; |
| |
| case 4150000: |
| val = AXP20X_CHRG_CTRL1_TGT_4_15V; |
| break; |
| |
| case 4200000: |
| val = AXP20X_CHRG_CTRL1_TGT_4_2V; |
| break; |
| |
| default: |
| /* |
| * AXP20x max voltage can be set to 4.36V and AXP22X max voltage |
| * can be set to 4.22V and 4.24V, but these voltages are too |
| * high for Lithium based batteries (AXP PMICs are supposed to |
| * be used with these kinds of battery). |
| */ |
| return -EINVAL; |
| } |
| |
| return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, |
| AXP20X_CHRG_CTRL1_TGT_VOLT, val); |
| } |
| |
| static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, |
| int charge_current) |
| { |
| if (charge_current > axp_batt->max_ccc) |
| return -EINVAL; |
| |
| charge_current = (charge_current - axp_batt->data->ccc_offset) / |
| axp_batt->data->ccc_scale; |
| |
| if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0) |
| return -EINVAL; |
| |
| return regmap_update_bits(axp_batt->regmap, AXP20X_CHRG_CTRL1, |
| AXP20X_CHRG_CTRL1_TGT_CURR, charge_current); |
| } |
| |
| static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp, |
| int charge_current) |
| { |
| bool lower_max = false; |
| |
| charge_current = (charge_current - axp->data->ccc_offset) / |
| axp->data->ccc_scale; |
| |
| if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0) |
| return -EINVAL; |
| |
| charge_current = charge_current * axp->data->ccc_scale + |
| axp->data->ccc_offset; |
| |
| if (charge_current > axp->max_ccc) |
| dev_warn(axp->dev, |
| "Setting max constant charge current higher than previously defined. Note that increasing the constant charge current may damage your battery.\n"); |
| else |
| lower_max = true; |
| |
| axp->max_ccc = charge_current; |
| |
| if (lower_max) { |
| int current_cc; |
| |
| axp20x_get_constant_charge_current(axp, ¤t_cc); |
| if (current_cc > charge_current) |
| axp20x_set_constant_charge_current(axp, charge_current); |
| } |
| |
| return 0; |
| } |
| static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt, |
| int min_voltage) |
| { |
| int val1 = (min_voltage - 2600000) / 100000; |
| |
| if (val1 < 0 || val1 > AXP20X_V_OFF_MASK) |
| return -EINVAL; |
| |
| return regmap_update_bits(axp_batt->regmap, AXP20X_V_OFF, |
| AXP20X_V_OFF_MASK, val1); |
| } |
| |
| static int axp20x_battery_set_prop(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: |
| return axp20x_set_voltage_min_design(axp20x_batt, val->intval); |
| |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: |
| return axp20x_batt->data->set_max_voltage(axp20x_batt, val->intval); |
| |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| return axp20x_set_constant_charge_current(axp20x_batt, |
| val->intval); |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| return axp20x_set_max_constant_charge_current(axp20x_batt, |
| val->intval); |
| case POWER_SUPPLY_PROP_STATUS: |
| switch (val->intval) { |
| case POWER_SUPPLY_STATUS_CHARGING: |
| return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, |
| AXP20X_CHRG_CTRL1_ENABLE, AXP20X_CHRG_CTRL1_ENABLE); |
| |
| case POWER_SUPPLY_STATUS_DISCHARGING: |
| case POWER_SUPPLY_STATUS_NOT_CHARGING: |
| return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, |
| AXP20X_CHRG_CTRL1_ENABLE, 0); |
| } |
| fallthrough; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static enum power_supply_property axp20x_battery_props[] = { |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, |
| POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, |
| POWER_SUPPLY_PROP_CAPACITY, |
| }; |
| |
| static int axp20x_battery_prop_writeable(struct power_supply *psy, |
| enum power_supply_property psp) |
| { |
| return psp == POWER_SUPPLY_PROP_STATUS || |
| psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN || |
| psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN || |
| psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT || |
| psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX; |
| } |
| |
| static const struct power_supply_desc axp20x_batt_ps_desc = { |
| .name = "axp20x-battery", |
| .type = POWER_SUPPLY_TYPE_BATTERY, |
| .properties = axp20x_battery_props, |
| .num_properties = ARRAY_SIZE(axp20x_battery_props), |
| .property_is_writeable = axp20x_battery_prop_writeable, |
| .get_property = axp20x_battery_get_prop, |
| .set_property = axp20x_battery_set_prop, |
| }; |
| |
| static const struct axp_data axp209_data = { |
| .ccc_scale = 100000, |
| .ccc_offset = 300000, |
| .get_max_voltage = axp20x_battery_get_max_voltage, |
| .set_max_voltage = axp20x_battery_set_max_voltage, |
| }; |
| |
| static const struct axp_data axp221_data = { |
| .ccc_scale = 150000, |
| .ccc_offset = 300000, |
| .has_fg_valid = true, |
| .get_max_voltage = axp22x_battery_get_max_voltage, |
| .set_max_voltage = axp22x_battery_set_max_voltage, |
| }; |
| |
| static const struct axp_data axp813_data = { |
| .ccc_scale = 200000, |
| .ccc_offset = 200000, |
| .has_fg_valid = true, |
| .get_max_voltage = axp813_battery_get_max_voltage, |
| .set_max_voltage = axp20x_battery_set_max_voltage, |
| }; |
| |
| static const struct of_device_id axp20x_battery_ps_id[] = { |
| { |
| .compatible = "x-powers,axp209-battery-power-supply", |
| .data = (void *)&axp209_data, |
| }, { |
| .compatible = "x-powers,axp221-battery-power-supply", |
| .data = (void *)&axp221_data, |
| }, { |
| .compatible = "x-powers,axp813-battery-power-supply", |
| .data = (void *)&axp813_data, |
| }, { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id); |
| |
| static int axp20x_power_probe(struct platform_device *pdev) |
| { |
| struct axp20x_batt_ps *axp20x_batt; |
| struct power_supply_config psy_cfg = {}; |
| struct power_supply_battery_info *info; |
| struct device *dev = &pdev->dev; |
| |
| if (!of_device_is_available(pdev->dev.of_node)) |
| return -ENODEV; |
| |
| axp20x_batt = devm_kzalloc(&pdev->dev, sizeof(*axp20x_batt), |
| GFP_KERNEL); |
| if (!axp20x_batt) |
| return -ENOMEM; |
| |
| axp20x_batt->dev = &pdev->dev; |
| |
| axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); |
| if (IS_ERR(axp20x_batt->batt_v)) { |
| if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV) |
| return -EPROBE_DEFER; |
| return PTR_ERR(axp20x_batt->batt_v); |
| } |
| |
| axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, |
| "batt_chrg_i"); |
| if (IS_ERR(axp20x_batt->batt_chrg_i)) { |
| if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV) |
| return -EPROBE_DEFER; |
| return PTR_ERR(axp20x_batt->batt_chrg_i); |
| } |
| |
| axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev, |
| "batt_dischrg_i"); |
| if (IS_ERR(axp20x_batt->batt_dischrg_i)) { |
| if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV) |
| return -EPROBE_DEFER; |
| return PTR_ERR(axp20x_batt->batt_dischrg_i); |
| } |
| |
| axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| platform_set_drvdata(pdev, axp20x_batt); |
| |
| psy_cfg.drv_data = axp20x_batt; |
| psy_cfg.of_node = pdev->dev.of_node; |
| |
| axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev); |
| |
| axp20x_batt->batt = devm_power_supply_register(&pdev->dev, |
| &axp20x_batt_ps_desc, |
| &psy_cfg); |
| if (IS_ERR(axp20x_batt->batt)) { |
| dev_err(&pdev->dev, "failed to register power supply: %ld\n", |
| PTR_ERR(axp20x_batt->batt)); |
| return PTR_ERR(axp20x_batt->batt); |
| } |
| |
| if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) { |
| int vmin = info->voltage_min_design_uv; |
| int ccc = info->constant_charge_current_max_ua; |
| |
| if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt, |
| vmin)) |
| dev_err(&pdev->dev, |
| "couldn't set voltage_min_design\n"); |
| |
| /* Set max to unverified value to be able to set CCC */ |
| axp20x_batt->max_ccc = ccc; |
| |
| if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt, |
| ccc)) { |
| dev_err(&pdev->dev, |
| "couldn't set constant charge current from DT: fallback to minimum value\n"); |
| ccc = 300000; |
| axp20x_batt->max_ccc = ccc; |
| axp20x_set_constant_charge_current(axp20x_batt, ccc); |
| } |
| } |
| |
| /* |
| * Update max CCC to a valid value if battery info is present or set it |
| * to current register value by default. |
| */ |
| axp20x_get_constant_charge_current(axp20x_batt, |
| &axp20x_batt->max_ccc); |
| |
| return 0; |
| } |
| |
| static struct platform_driver axp20x_batt_driver = { |
| .probe = axp20x_power_probe, |
| .driver = { |
| .name = "axp20x-battery-power-supply", |
| .of_match_table = axp20x_battery_ps_id, |
| }, |
| }; |
| |
| module_platform_driver(axp20x_batt_driver); |
| |
| MODULE_DESCRIPTION("Battery power supply driver for AXP20X and AXP22X PMICs"); |
| MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>"); |
| MODULE_LICENSE("GPL"); |