| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| // |
| // Copyright (c) 2018 BayLibre, SAS. |
| // Author: Jerome Brunet <jbrunet@baylibre.com> |
| |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/regmap.h> |
| #include <linux/reset.h> |
| #include <sound/soc.h> |
| |
| #include "axg-tdm-formatter.h" |
| |
| struct axg_tdm_formatter { |
| struct list_head list; |
| struct axg_tdm_stream *stream; |
| const struct axg_tdm_formatter_driver *drv; |
| struct clk *pclk; |
| struct clk *sclk; |
| struct clk *lrclk; |
| struct clk *sclk_sel; |
| struct clk *lrclk_sel; |
| struct reset_control *reset; |
| bool enabled; |
| struct regmap *map; |
| }; |
| |
| int axg_tdm_formatter_set_channel_masks(struct regmap *map, |
| struct axg_tdm_stream *ts, |
| unsigned int offset) |
| { |
| unsigned int val, ch = ts->channels; |
| unsigned long mask; |
| int i, j; |
| |
| /* |
| * Distribute the channels of the stream over the available slots |
| * of each TDM lane |
| */ |
| for (i = 0; i < AXG_TDM_NUM_LANES; i++) { |
| val = 0; |
| mask = ts->mask[i]; |
| |
| for (j = find_first_bit(&mask, 32); |
| (j < 32) && ch; |
| j = find_next_bit(&mask, 32, j + 1)) { |
| val |= 1 << j; |
| ch -= 1; |
| } |
| |
| regmap_write(map, offset, val); |
| offset += regmap_get_reg_stride(map); |
| } |
| |
| /* |
| * If we still have channel left at the end of the process, it means |
| * the stream has more channels than we can accommodate and we should |
| * have caught this earlier. |
| */ |
| if (WARN_ON(ch != 0)) { |
| pr_err("channel mask error\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(axg_tdm_formatter_set_channel_masks); |
| |
| static int axg_tdm_formatter_enable(struct axg_tdm_formatter *formatter) |
| { |
| struct axg_tdm_stream *ts = formatter->stream; |
| bool invert; |
| int ret; |
| |
| /* Do nothing if the formatter is already enabled */ |
| if (formatter->enabled) |
| return 0; |
| |
| /* |
| * On the g12a (and possibly other SoCs), when a stream using |
| * multiple lanes is restarted, it will sometimes not start |
| * from the first lane, but randomly from another used one. |
| * The result is an unexpected and random channel shift. |
| * |
| * The hypothesis is that an HW counter is not properly reset |
| * and the formatter simply starts on the lane it stopped |
| * before. Unfortunately, there does not seems to be a way to |
| * reset this through the registers of the block. |
| * |
| * However, the g12a has indenpendent reset lines for each audio |
| * devices. Using this reset before each start solves the issue. |
| */ |
| ret = reset_control_reset(formatter->reset); |
| if (ret) |
| return ret; |
| |
| /* |
| * If sclk is inverted, it means the bit should latched on the |
| * rising edge which is what our HW expects. If not, we need to |
| * invert it before the formatter. |
| */ |
| invert = axg_tdm_sclk_invert(ts->iface->fmt); |
| ret = clk_set_phase(formatter->sclk, invert ? 0 : 180); |
| if (ret) |
| return ret; |
| |
| /* Setup the stream parameter in the formatter */ |
| ret = formatter->drv->ops->prepare(formatter->map, |
| formatter->drv->quirks, |
| formatter->stream); |
| if (ret) |
| return ret; |
| |
| /* Enable the signal clocks feeding the formatter */ |
| ret = clk_prepare_enable(formatter->sclk); |
| if (ret) |
| return ret; |
| |
| ret = clk_prepare_enable(formatter->lrclk); |
| if (ret) { |
| clk_disable_unprepare(formatter->sclk); |
| return ret; |
| } |
| |
| /* Finally, actually enable the formatter */ |
| formatter->drv->ops->enable(formatter->map); |
| formatter->enabled = true; |
| |
| return 0; |
| } |
| |
| static void axg_tdm_formatter_disable(struct axg_tdm_formatter *formatter) |
| { |
| /* Do nothing if the formatter is already disabled */ |
| if (!formatter->enabled) |
| return; |
| |
| formatter->drv->ops->disable(formatter->map); |
| clk_disable_unprepare(formatter->lrclk); |
| clk_disable_unprepare(formatter->sclk); |
| formatter->enabled = false; |
| } |
| |
| static int axg_tdm_formatter_attach(struct axg_tdm_formatter *formatter) |
| { |
| struct axg_tdm_stream *ts = formatter->stream; |
| int ret = 0; |
| |
| mutex_lock(&ts->lock); |
| |
| /* Catch up if the stream is already running when we attach */ |
| if (ts->ready) { |
| ret = axg_tdm_formatter_enable(formatter); |
| if (ret) { |
| pr_err("failed to enable formatter\n"); |
| goto out; |
| } |
| } |
| |
| list_add_tail(&formatter->list, &ts->formatter_list); |
| out: |
| mutex_unlock(&ts->lock); |
| return ret; |
| } |
| |
| static void axg_tdm_formatter_dettach(struct axg_tdm_formatter *formatter) |
| { |
| struct axg_tdm_stream *ts = formatter->stream; |
| |
| mutex_lock(&ts->lock); |
| list_del(&formatter->list); |
| mutex_unlock(&ts->lock); |
| |
| axg_tdm_formatter_disable(formatter); |
| } |
| |
| static int axg_tdm_formatter_power_up(struct axg_tdm_formatter *formatter, |
| struct snd_soc_dapm_widget *w) |
| { |
| struct axg_tdm_stream *ts = formatter->drv->ops->get_stream(w); |
| int ret; |
| |
| /* |
| * If we don't get a stream at this stage, it would mean that the |
| * widget is powering up but is not attached to any backend DAI. |
| * It should not happen, ever ! |
| */ |
| if (WARN_ON(!ts)) |
| return -ENODEV; |
| |
| /* Clock our device */ |
| ret = clk_prepare_enable(formatter->pclk); |
| if (ret) |
| return ret; |
| |
| /* Reparent the bit clock to the TDM interface */ |
| ret = clk_set_parent(formatter->sclk_sel, ts->iface->sclk); |
| if (ret) |
| goto disable_pclk; |
| |
| /* Reparent the sample clock to the TDM interface */ |
| ret = clk_set_parent(formatter->lrclk_sel, ts->iface->lrclk); |
| if (ret) |
| goto disable_pclk; |
| |
| formatter->stream = ts; |
| ret = axg_tdm_formatter_attach(formatter); |
| if (ret) |
| goto disable_pclk; |
| |
| return 0; |
| |
| disable_pclk: |
| clk_disable_unprepare(formatter->pclk); |
| return ret; |
| } |
| |
| static void axg_tdm_formatter_power_down(struct axg_tdm_formatter *formatter) |
| { |
| axg_tdm_formatter_dettach(formatter); |
| clk_disable_unprepare(formatter->pclk); |
| formatter->stream = NULL; |
| } |
| |
| int axg_tdm_formatter_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *control, |
| int event) |
| { |
| struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm); |
| struct axg_tdm_formatter *formatter = snd_soc_component_get_drvdata(c); |
| int ret = 0; |
| |
| switch (event) { |
| case SND_SOC_DAPM_PRE_PMU: |
| ret = axg_tdm_formatter_power_up(formatter, w); |
| break; |
| |
| case SND_SOC_DAPM_PRE_PMD: |
| axg_tdm_formatter_power_down(formatter); |
| break; |
| |
| default: |
| dev_err(c->dev, "Unexpected event %d\n", event); |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(axg_tdm_formatter_event); |
| |
| int axg_tdm_formatter_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const struct axg_tdm_formatter_driver *drv; |
| struct axg_tdm_formatter *formatter; |
| void __iomem *regs; |
| |
| drv = of_device_get_match_data(dev); |
| if (!drv) { |
| dev_err(dev, "failed to match device\n"); |
| return -ENODEV; |
| } |
| |
| formatter = devm_kzalloc(dev, sizeof(*formatter), GFP_KERNEL); |
| if (!formatter) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, formatter); |
| formatter->drv = drv; |
| |
| regs = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(regs)) |
| return PTR_ERR(regs); |
| |
| formatter->map = devm_regmap_init_mmio(dev, regs, drv->regmap_cfg); |
| if (IS_ERR(formatter->map)) { |
| dev_err(dev, "failed to init regmap: %ld\n", |
| PTR_ERR(formatter->map)); |
| return PTR_ERR(formatter->map); |
| } |
| |
| /* Peripharal clock */ |
| formatter->pclk = devm_clk_get(dev, "pclk"); |
| if (IS_ERR(formatter->pclk)) |
| return dev_err_probe(dev, PTR_ERR(formatter->pclk), "failed to get pclk\n"); |
| |
| /* Formatter bit clock */ |
| formatter->sclk = devm_clk_get(dev, "sclk"); |
| if (IS_ERR(formatter->sclk)) |
| return dev_err_probe(dev, PTR_ERR(formatter->sclk), "failed to get sclk\n"); |
| |
| /* Formatter sample clock */ |
| formatter->lrclk = devm_clk_get(dev, "lrclk"); |
| if (IS_ERR(formatter->lrclk)) |
| return dev_err_probe(dev, PTR_ERR(formatter->lrclk), "failed to get lrclk\n"); |
| |
| /* Formatter bit clock input multiplexer */ |
| formatter->sclk_sel = devm_clk_get(dev, "sclk_sel"); |
| if (IS_ERR(formatter->sclk_sel)) |
| return dev_err_probe(dev, PTR_ERR(formatter->sclk_sel), "failed to get sclk_sel\n"); |
| |
| /* Formatter sample clock input multiplexer */ |
| formatter->lrclk_sel = devm_clk_get(dev, "lrclk_sel"); |
| if (IS_ERR(formatter->lrclk_sel)) |
| return dev_err_probe(dev, PTR_ERR(formatter->lrclk_sel), |
| "failed to get lrclk_sel\n"); |
| |
| /* Formatter dedicated reset line */ |
| formatter->reset = devm_reset_control_get_optional_exclusive(dev, NULL); |
| if (IS_ERR(formatter->reset)) |
| return dev_err_probe(dev, PTR_ERR(formatter->reset), "failed to get reset\n"); |
| |
| return devm_snd_soc_register_component(dev, drv->component_drv, |
| NULL, 0); |
| } |
| EXPORT_SYMBOL_GPL(axg_tdm_formatter_probe); |
| |
| int axg_tdm_stream_start(struct axg_tdm_stream *ts) |
| { |
| struct axg_tdm_formatter *formatter; |
| int ret = 0; |
| |
| mutex_lock(&ts->lock); |
| ts->ready = true; |
| |
| /* Start all the formatters attached to the stream */ |
| list_for_each_entry(formatter, &ts->formatter_list, list) { |
| ret = axg_tdm_formatter_enable(formatter); |
| if (ret) { |
| pr_err("failed to start tdm stream\n"); |
| goto out; |
| } |
| } |
| |
| out: |
| mutex_unlock(&ts->lock); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(axg_tdm_stream_start); |
| |
| void axg_tdm_stream_stop(struct axg_tdm_stream *ts) |
| { |
| struct axg_tdm_formatter *formatter; |
| |
| mutex_lock(&ts->lock); |
| ts->ready = false; |
| |
| /* Stop all the formatters attached to the stream */ |
| list_for_each_entry(formatter, &ts->formatter_list, list) { |
| axg_tdm_formatter_disable(formatter); |
| } |
| |
| mutex_unlock(&ts->lock); |
| } |
| EXPORT_SYMBOL_GPL(axg_tdm_stream_stop); |
| |
| struct axg_tdm_stream *axg_tdm_stream_alloc(struct axg_tdm_iface *iface) |
| { |
| struct axg_tdm_stream *ts; |
| |
| ts = kzalloc(sizeof(*ts), GFP_KERNEL); |
| if (ts) { |
| INIT_LIST_HEAD(&ts->formatter_list); |
| mutex_init(&ts->lock); |
| ts->iface = iface; |
| } |
| |
| return ts; |
| } |
| EXPORT_SYMBOL_GPL(axg_tdm_stream_alloc); |
| |
| void axg_tdm_stream_free(struct axg_tdm_stream *ts) |
| { |
| /* |
| * If the list is not empty, it would mean that one of the formatter |
| * widget is still powered and attached to the interface while we |
| * are removing the TDM DAI. It should not be possible |
| */ |
| WARN_ON(!list_empty(&ts->formatter_list)); |
| mutex_destroy(&ts->lock); |
| kfree(ts); |
| } |
| EXPORT_SYMBOL_GPL(axg_tdm_stream_free); |
| |
| MODULE_DESCRIPTION("Amlogic AXG TDM formatter driver"); |
| MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); |
| MODULE_LICENSE("GPL v2"); |