| /* |
| * Machine check handler. |
| * |
| * K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs. |
| * Rest from unknown author(s). |
| * 2004 Andi Kleen. Rewrote most of it. |
| * Copyright 2008 Intel Corporation |
| * Author: Andi Kleen |
| */ |
| #include <linux/thread_info.h> |
| #include <linux/capability.h> |
| #include <linux/miscdevice.h> |
| #include <linux/interrupt.h> |
| #include <linux/ratelimit.h> |
| #include <linux/kallsyms.h> |
| #include <linux/rcupdate.h> |
| #include <linux/kobject.h> |
| #include <linux/uaccess.h> |
| #include <linux/kdebug.h> |
| #include <linux/kernel.h> |
| #include <linux/percpu.h> |
| #include <linux/string.h> |
| #include <linux/sysdev.h> |
| #include <linux/delay.h> |
| #include <linux/ctype.h> |
| #include <linux/sched.h> |
| #include <linux/sysfs.h> |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/kmod.h> |
| #include <linux/poll.h> |
| #include <linux/nmi.h> |
| #include <linux/cpu.h> |
| #include <linux/smp.h> |
| #include <linux/fs.h> |
| #include <linux/mm.h> |
| |
| #include <asm/processor.h> |
| #include <asm/hw_irq.h> |
| #include <asm/apic.h> |
| #include <asm/idle.h> |
| #include <asm/ipi.h> |
| #include <asm/mce.h> |
| #include <asm/msr.h> |
| |
| #include "mce-internal.h" |
| |
| /* Handle unconfigured int18 (should never happen) */ |
| static void unexpected_machine_check(struct pt_regs *regs, long error_code) |
| { |
| printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", |
| smp_processor_id()); |
| } |
| |
| /* Call the installed machine check handler for this CPU setup. */ |
| void (*machine_check_vector)(struct pt_regs *, long error_code) = |
| unexpected_machine_check; |
| |
| int mce_disabled __read_mostly; |
| |
| #ifdef CONFIG_X86_NEW_MCE |
| |
| #define MISC_MCELOG_MINOR 227 |
| |
| #define SPINUNIT 100 /* 100ns */ |
| |
| atomic_t mce_entry; |
| |
| DEFINE_PER_CPU(unsigned, mce_exception_count); |
| |
| /* |
| * Tolerant levels: |
| * 0: always panic on uncorrected errors, log corrected errors |
| * 1: panic or SIGBUS on uncorrected errors, log corrected errors |
| * 2: SIGBUS or log uncorrected errors (if possible), log corrected errors |
| * 3: never panic or SIGBUS, log all errors (for testing only) |
| */ |
| static int tolerant __read_mostly = 1; |
| static int banks __read_mostly; |
| static u64 *bank __read_mostly; |
| static int rip_msr __read_mostly; |
| static int mce_bootlog __read_mostly = -1; |
| static int monarch_timeout __read_mostly = -1; |
| static int mce_panic_timeout __read_mostly; |
| static int mce_dont_log_ce __read_mostly; |
| int mce_cmci_disabled __read_mostly; |
| int mce_ignore_ce __read_mostly; |
| int mce_ser __read_mostly; |
| |
| /* User mode helper program triggered by machine check event */ |
| static unsigned long mce_need_notify; |
| static char mce_helper[128]; |
| static char *mce_helper_argv[2] = { mce_helper, NULL }; |
| |
| static unsigned long dont_init_banks; |
| |
| static DECLARE_WAIT_QUEUE_HEAD(mce_wait); |
| static DEFINE_PER_CPU(struct mce, mces_seen); |
| static int cpu_missing; |
| |
| |
| /* MCA banks polled by the period polling timer for corrected events */ |
| DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = { |
| [0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL |
| }; |
| |
| static inline int skip_bank_init(int i) |
| { |
| return i < BITS_PER_LONG && test_bit(i, &dont_init_banks); |
| } |
| |
| static DEFINE_PER_CPU(struct work_struct, mce_work); |
| |
| /* Do initial initialization of a struct mce */ |
| void mce_setup(struct mce *m) |
| { |
| memset(m, 0, sizeof(struct mce)); |
| m->cpu = m->extcpu = smp_processor_id(); |
| rdtscll(m->tsc); |
| /* We hope get_seconds stays lockless */ |
| m->time = get_seconds(); |
| m->cpuvendor = boot_cpu_data.x86_vendor; |
| m->cpuid = cpuid_eax(1); |
| #ifdef CONFIG_SMP |
| m->socketid = cpu_data(m->extcpu).phys_proc_id; |
| #endif |
| m->apicid = cpu_data(m->extcpu).initial_apicid; |
| rdmsrl(MSR_IA32_MCG_CAP, m->mcgcap); |
| } |
| |
| DEFINE_PER_CPU(struct mce, injectm); |
| EXPORT_PER_CPU_SYMBOL_GPL(injectm); |
| |
| /* |
| * Lockless MCE logging infrastructure. |
| * This avoids deadlocks on printk locks without having to break locks. Also |
| * separate MCEs from kernel messages to avoid bogus bug reports. |
| */ |
| |
| static struct mce_log mcelog = { |
| .signature = MCE_LOG_SIGNATURE, |
| .len = MCE_LOG_LEN, |
| .recordlen = sizeof(struct mce), |
| }; |
| |
| void mce_log(struct mce *mce) |
| { |
| unsigned next, entry; |
| |
| mce->finished = 0; |
| wmb(); |
| for (;;) { |
| entry = rcu_dereference(mcelog.next); |
| for (;;) { |
| /* |
| * When the buffer fills up discard new entries. |
| * Assume that the earlier errors are the more |
| * interesting ones: |
| */ |
| if (entry >= MCE_LOG_LEN) { |
| set_bit(MCE_OVERFLOW, |
| (unsigned long *)&mcelog.flags); |
| return; |
| } |
| /* Old left over entry. Skip: */ |
| if (mcelog.entry[entry].finished) { |
| entry++; |
| continue; |
| } |
| break; |
| } |
| smp_rmb(); |
| next = entry + 1; |
| if (cmpxchg(&mcelog.next, entry, next) == entry) |
| break; |
| } |
| memcpy(mcelog.entry + entry, mce, sizeof(struct mce)); |
| wmb(); |
| mcelog.entry[entry].finished = 1; |
| wmb(); |
| |
| mce->finished = 1; |
| set_bit(0, &mce_need_notify); |
| } |
| |
| static void print_mce(struct mce *m) |
| { |
| printk(KERN_EMERG |
| "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n", |
| m->extcpu, m->mcgstatus, m->bank, m->status); |
| if (m->ip) { |
| printk(KERN_EMERG "RIP%s %02x:<%016Lx> ", |
| !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "", |
| m->cs, m->ip); |
| if (m->cs == __KERNEL_CS) |
| print_symbol("{%s}", m->ip); |
| printk("\n"); |
| } |
| printk(KERN_EMERG "TSC %llx ", m->tsc); |
| if (m->addr) |
| printk("ADDR %llx ", m->addr); |
| if (m->misc) |
| printk("MISC %llx ", m->misc); |
| printk("\n"); |
| printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n", |
| m->cpuvendor, m->cpuid, m->time, m->socketid, |
| m->apicid); |
| } |
| |
| static void print_mce_head(void) |
| { |
| printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n"); |
| } |
| |
| static void print_mce_tail(void) |
| { |
| printk(KERN_EMERG "This is not a software problem!\n" |
| KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n"); |
| } |
| |
| #define PANIC_TIMEOUT 5 /* 5 seconds */ |
| |
| static atomic_t mce_paniced; |
| |
| /* Panic in progress. Enable interrupts and wait for final IPI */ |
| static void wait_for_panic(void) |
| { |
| long timeout = PANIC_TIMEOUT*USEC_PER_SEC; |
| preempt_disable(); |
| local_irq_enable(); |
| while (timeout-- > 0) |
| udelay(1); |
| if (panic_timeout == 0) |
| panic_timeout = mce_panic_timeout; |
| panic("Panicing machine check CPU died"); |
| } |
| |
| static void mce_panic(char *msg, struct mce *final, char *exp) |
| { |
| int i; |
| |
| /* |
| * Make sure only one CPU runs in machine check panic |
| */ |
| if (atomic_add_return(1, &mce_paniced) > 1) |
| wait_for_panic(); |
| barrier(); |
| |
| bust_spinlocks(1); |
| console_verbose(); |
| print_mce_head(); |
| /* First print corrected ones that are still unlogged */ |
| for (i = 0; i < MCE_LOG_LEN; i++) { |
| struct mce *m = &mcelog.entry[i]; |
| if (!(m->status & MCI_STATUS_VAL)) |
| continue; |
| if (!(m->status & MCI_STATUS_UC)) |
| print_mce(m); |
| } |
| /* Now print uncorrected but with the final one last */ |
| for (i = 0; i < MCE_LOG_LEN; i++) { |
| struct mce *m = &mcelog.entry[i]; |
| if (!(m->status & MCI_STATUS_VAL)) |
| continue; |
| if (!(m->status & MCI_STATUS_UC)) |
| continue; |
| if (!final || memcmp(m, final, sizeof(struct mce))) |
| print_mce(m); |
| } |
| if (final) |
| print_mce(final); |
| if (cpu_missing) |
| printk(KERN_EMERG "Some CPUs didn't answer in synchronization\n"); |
| print_mce_tail(); |
| if (exp) |
| printk(KERN_EMERG "Machine check: %s\n", exp); |
| if (panic_timeout == 0) |
| panic_timeout = mce_panic_timeout; |
| panic(msg); |
| } |
| |
| /* Support code for software error injection */ |
| |
| static int msr_to_offset(u32 msr) |
| { |
| unsigned bank = __get_cpu_var(injectm.bank); |
| if (msr == rip_msr) |
| return offsetof(struct mce, ip); |
| if (msr == MSR_IA32_MC0_STATUS + bank*4) |
| return offsetof(struct mce, status); |
| if (msr == MSR_IA32_MC0_ADDR + bank*4) |
| return offsetof(struct mce, addr); |
| if (msr == MSR_IA32_MC0_MISC + bank*4) |
| return offsetof(struct mce, misc); |
| if (msr == MSR_IA32_MCG_STATUS) |
| return offsetof(struct mce, mcgstatus); |
| return -1; |
| } |
| |
| /* MSR access wrappers used for error injection */ |
| static u64 mce_rdmsrl(u32 msr) |
| { |
| u64 v; |
| if (__get_cpu_var(injectm).finished) { |
| int offset = msr_to_offset(msr); |
| if (offset < 0) |
| return 0; |
| return *(u64 *)((char *)&__get_cpu_var(injectm) + offset); |
| } |
| rdmsrl(msr, v); |
| return v; |
| } |
| |
| static void mce_wrmsrl(u32 msr, u64 v) |
| { |
| if (__get_cpu_var(injectm).finished) { |
| int offset = msr_to_offset(msr); |
| if (offset >= 0) |
| *(u64 *)((char *)&__get_cpu_var(injectm) + offset) = v; |
| return; |
| } |
| wrmsrl(msr, v); |
| } |
| |
| /* |
| * Simple lockless ring to communicate PFNs from the exception handler with the |
| * process context work function. This is vastly simplified because there's |
| * only a single reader and a single writer. |
| */ |
| #define MCE_RING_SIZE 16 /* we use one entry less */ |
| |
| struct mce_ring { |
| unsigned short start; |
| unsigned short end; |
| unsigned long ring[MCE_RING_SIZE]; |
| }; |
| static DEFINE_PER_CPU(struct mce_ring, mce_ring); |
| |
| /* Runs with CPU affinity in workqueue */ |
| static int mce_ring_empty(void) |
| { |
| struct mce_ring *r = &__get_cpu_var(mce_ring); |
| |
| return r->start == r->end; |
| } |
| |
| static int mce_ring_get(unsigned long *pfn) |
| { |
| struct mce_ring *r; |
| int ret = 0; |
| |
| *pfn = 0; |
| get_cpu(); |
| r = &__get_cpu_var(mce_ring); |
| if (r->start == r->end) |
| goto out; |
| *pfn = r->ring[r->start]; |
| r->start = (r->start + 1) % MCE_RING_SIZE; |
| ret = 1; |
| out: |
| put_cpu(); |
| return ret; |
| } |
| |
| /* Always runs in MCE context with preempt off */ |
| static int mce_ring_add(unsigned long pfn) |
| { |
| struct mce_ring *r = &__get_cpu_var(mce_ring); |
| unsigned next; |
| |
| next = (r->end + 1) % MCE_RING_SIZE; |
| if (next == r->start) |
| return -1; |
| r->ring[r->end] = pfn; |
| wmb(); |
| r->end = next; |
| return 0; |
| } |
| |
| int mce_available(struct cpuinfo_x86 *c) |
| { |
| if (mce_disabled) |
| return 0; |
| return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA); |
| } |
| |
| static void mce_schedule_work(void) |
| { |
| if (!mce_ring_empty()) { |
| struct work_struct *work = &__get_cpu_var(mce_work); |
| if (!work_pending(work)) |
| schedule_work(work); |
| } |
| } |
| |
| /* |
| * Get the address of the instruction at the time of the machine check |
| * error. |
| */ |
| static inline void mce_get_rip(struct mce *m, struct pt_regs *regs) |
| { |
| |
| if (regs && (m->mcgstatus & (MCG_STATUS_RIPV|MCG_STATUS_EIPV))) { |
| m->ip = regs->ip; |
| m->cs = regs->cs; |
| } else { |
| m->ip = 0; |
| m->cs = 0; |
| } |
| if (rip_msr) |
| m->ip = mce_rdmsrl(rip_msr); |
| } |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| /* |
| * Called after interrupts have been reenabled again |
| * when a MCE happened during an interrupts off region |
| * in the kernel. |
| */ |
| asmlinkage void smp_mce_self_interrupt(struct pt_regs *regs) |
| { |
| ack_APIC_irq(); |
| exit_idle(); |
| irq_enter(); |
| mce_notify_irq(); |
| mce_schedule_work(); |
| irq_exit(); |
| } |
| #endif |
| |
| static void mce_report_event(struct pt_regs *regs) |
| { |
| if (regs->flags & (X86_VM_MASK|X86_EFLAGS_IF)) { |
| mce_notify_irq(); |
| /* |
| * Triggering the work queue here is just an insurance |
| * policy in case the syscall exit notify handler |
| * doesn't run soon enough or ends up running on the |
| * wrong CPU (can happen when audit sleeps) |
| */ |
| mce_schedule_work(); |
| return; |
| } |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| /* |
| * Without APIC do not notify. The event will be picked |
| * up eventually. |
| */ |
| if (!cpu_has_apic) |
| return; |
| |
| /* |
| * When interrupts are disabled we cannot use |
| * kernel services safely. Trigger an self interrupt |
| * through the APIC to instead do the notification |
| * after interrupts are reenabled again. |
| */ |
| apic->send_IPI_self(MCE_SELF_VECTOR); |
| |
| /* |
| * Wait for idle afterwards again so that we don't leave the |
| * APIC in a non idle state because the normal APIC writes |
| * cannot exclude us. |
| */ |
| apic_wait_icr_idle(); |
| #endif |
| } |
| |
| DEFINE_PER_CPU(unsigned, mce_poll_count); |
| |
| /* |
| * Poll for corrected events or events that happened before reset. |
| * Those are just logged through /dev/mcelog. |
| * |
| * This is executed in standard interrupt context. |
| * |
| * Note: spec recommends to panic for fatal unsignalled |
| * errors here. However this would be quite problematic -- |
| * we would need to reimplement the Monarch handling and |
| * it would mess up the exclusion between exception handler |
| * and poll hander -- * so we skip this for now. |
| * These cases should not happen anyways, or only when the CPU |
| * is already totally * confused. In this case it's likely it will |
| * not fully execute the machine check handler either. |
| */ |
| void machine_check_poll(enum mcp_flags flags, mce_banks_t *b) |
| { |
| struct mce m; |
| int i; |
| |
| __get_cpu_var(mce_poll_count)++; |
| |
| mce_setup(&m); |
| |
| m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS); |
| for (i = 0; i < banks; i++) { |
| if (!bank[i] || !test_bit(i, *b)) |
| continue; |
| |
| m.misc = 0; |
| m.addr = 0; |
| m.bank = i; |
| m.tsc = 0; |
| |
| barrier(); |
| m.status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4); |
| if (!(m.status & MCI_STATUS_VAL)) |
| continue; |
| |
| /* |
| * Uncorrected or signalled events are handled by the exception |
| * handler when it is enabled, so don't process those here. |
| * |
| * TBD do the same check for MCI_STATUS_EN here? |
| */ |
| if (!(flags & MCP_UC) && |
| (m.status & (mce_ser ? MCI_STATUS_S : MCI_STATUS_UC))) |
| continue; |
| |
| if (m.status & MCI_STATUS_MISCV) |
| m.misc = mce_rdmsrl(MSR_IA32_MC0_MISC + i*4); |
| if (m.status & MCI_STATUS_ADDRV) |
| m.addr = mce_rdmsrl(MSR_IA32_MC0_ADDR + i*4); |
| |
| if (!(flags & MCP_TIMESTAMP)) |
| m.tsc = 0; |
| /* |
| * Don't get the IP here because it's unlikely to |
| * have anything to do with the actual error location. |
| */ |
| if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) { |
| mce_log(&m); |
| add_taint(TAINT_MACHINE_CHECK); |
| } |
| |
| /* |
| * Clear state for this bank. |
| */ |
| mce_wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); |
| } |
| |
| /* |
| * Don't clear MCG_STATUS here because it's only defined for |
| * exceptions. |
| */ |
| |
| sync_core(); |
| } |
| EXPORT_SYMBOL_GPL(machine_check_poll); |
| |
| /* |
| * Do a quick check if any of the events requires a panic. |
| * This decides if we keep the events around or clear them. |
| */ |
| static int mce_no_way_out(struct mce *m, char **msg) |
| { |
| int i; |
| |
| for (i = 0; i < banks; i++) { |
| m->status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4); |
| if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY) |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* |
| * Variable to establish order between CPUs while scanning. |
| * Each CPU spins initially until executing is equal its number. |
| */ |
| static atomic_t mce_executing; |
| |
| /* |
| * Defines order of CPUs on entry. First CPU becomes Monarch. |
| */ |
| static atomic_t mce_callin; |
| |
| /* |
| * Check if a timeout waiting for other CPUs happened. |
| */ |
| static int mce_timed_out(u64 *t) |
| { |
| /* |
| * The others already did panic for some reason. |
| * Bail out like in a timeout. |
| * rmb() to tell the compiler that system_state |
| * might have been modified by someone else. |
| */ |
| rmb(); |
| if (atomic_read(&mce_paniced)) |
| wait_for_panic(); |
| if (!monarch_timeout) |
| goto out; |
| if ((s64)*t < SPINUNIT) { |
| /* CHECKME: Make panic default for 1 too? */ |
| if (tolerant < 1) |
| mce_panic("Timeout synchronizing machine check over CPUs", |
| NULL, NULL); |
| cpu_missing = 1; |
| return 1; |
| } |
| *t -= SPINUNIT; |
| out: |
| touch_nmi_watchdog(); |
| return 0; |
| } |
| |
| /* |
| * The Monarch's reign. The Monarch is the CPU who entered |
| * the machine check handler first. It waits for the others to |
| * raise the exception too and then grades them. When any |
| * error is fatal panic. Only then let the others continue. |
| * |
| * The other CPUs entering the MCE handler will be controlled by the |
| * Monarch. They are called Subjects. |
| * |
| * This way we prevent any potential data corruption in a unrecoverable case |
| * and also makes sure always all CPU's errors are examined. |
| * |
| * Also this detects the case of an machine check event coming from outer |
| * space (not detected by any CPUs) In this case some external agent wants |
| * us to shut down, so panic too. |
| * |
| * The other CPUs might still decide to panic if the handler happens |
| * in a unrecoverable place, but in this case the system is in a semi-stable |
| * state and won't corrupt anything by itself. It's ok to let the others |
| * continue for a bit first. |
| * |
| * All the spin loops have timeouts; when a timeout happens a CPU |
| * typically elects itself to be Monarch. |
| */ |
| static void mce_reign(void) |
| { |
| int cpu; |
| struct mce *m = NULL; |
| int global_worst = 0; |
| char *msg = NULL; |
| char *nmsg = NULL; |
| |
| /* |
| * This CPU is the Monarch and the other CPUs have run |
| * through their handlers. |
| * Grade the severity of the errors of all the CPUs. |
| */ |
| for_each_possible_cpu(cpu) { |
| int severity = mce_severity(&per_cpu(mces_seen, cpu), tolerant, |
| &nmsg); |
| if (severity > global_worst) { |
| msg = nmsg; |
| global_worst = severity; |
| m = &per_cpu(mces_seen, cpu); |
| } |
| } |
| |
| /* |
| * Cannot recover? Panic here then. |
| * This dumps all the mces in the log buffer and stops the |
| * other CPUs. |
| */ |
| if (m && global_worst >= MCE_PANIC_SEVERITY && tolerant < 3) |
| mce_panic("Fatal Machine check", m, msg); |
| |
| /* |
| * For UC somewhere we let the CPU who detects it handle it. |
| * Also must let continue the others, otherwise the handling |
| * CPU could deadlock on a lock. |
| */ |
| |
| /* |
| * No machine check event found. Must be some external |
| * source or one CPU is hung. Panic. |
| */ |
| if (!m && tolerant < 3) |
| mce_panic("Machine check from unknown source", NULL, NULL); |
| |
| /* |
| * Now clear all the mces_seen so that they don't reappear on |
| * the next mce. |
| */ |
| for_each_possible_cpu(cpu) |
| memset(&per_cpu(mces_seen, cpu), 0, sizeof(struct mce)); |
| } |
| |
| static atomic_t global_nwo; |
| |
| /* |
| * Start of Monarch synchronization. This waits until all CPUs have |
| * entered the exception handler and then determines if any of them |
| * saw a fatal event that requires panic. Then it executes them |
| * in the entry order. |
| * TBD double check parallel CPU hotunplug |
| */ |
| static int mce_start(int *no_way_out) |
| { |
| int order; |
| int cpus = num_online_cpus(); |
| u64 timeout = (u64)monarch_timeout * NSEC_PER_USEC; |
| |
| if (!timeout) |
| return -1; |
| |
| atomic_add(*no_way_out, &global_nwo); |
| /* |
| * global_nwo should be updated before mce_callin |
| */ |
| smp_wmb(); |
| order = atomic_add_return(1, &mce_callin); |
| |
| /* |
| * Wait for everyone. |
| */ |
| while (atomic_read(&mce_callin) != cpus) { |
| if (mce_timed_out(&timeout)) { |
| atomic_set(&global_nwo, 0); |
| return -1; |
| } |
| ndelay(SPINUNIT); |
| } |
| |
| /* |
| * mce_callin should be read before global_nwo |
| */ |
| smp_rmb(); |
| |
| if (order == 1) { |
| /* |
| * Monarch: Starts executing now, the others wait. |
| */ |
| atomic_set(&mce_executing, 1); |
| } else { |
| /* |
| * Subject: Now start the scanning loop one by one in |
| * the original callin order. |
| * This way when there are any shared banks it will be |
| * only seen by one CPU before cleared, avoiding duplicates. |
| */ |
| while (atomic_read(&mce_executing) < order) { |
| if (mce_timed_out(&timeout)) { |
| atomic_set(&global_nwo, 0); |
| return -1; |
| } |
| ndelay(SPINUNIT); |
| } |
| } |
| |
| /* |
| * Cache the global no_way_out state. |
| */ |
| *no_way_out = atomic_read(&global_nwo); |
| |
| return order; |
| } |
| |
| /* |
| * Synchronize between CPUs after main scanning loop. |
| * This invokes the bulk of the Monarch processing. |
| */ |
| static int mce_end(int order) |
| { |
| int ret = -1; |
| u64 timeout = (u64)monarch_timeout * NSEC_PER_USEC; |
| |
| if (!timeout) |
| goto reset; |
| if (order < 0) |
| goto reset; |
| |
| /* |
| * Allow others to run. |
| */ |
| atomic_inc(&mce_executing); |
| |
| if (order == 1) { |
| /* CHECKME: Can this race with a parallel hotplug? */ |
| int cpus = num_online_cpus(); |
| |
| /* |
| * Monarch: Wait for everyone to go through their scanning |
| * loops. |
| */ |
| while (atomic_read(&mce_executing) <= cpus) { |
| if (mce_timed_out(&timeout)) |
| goto reset; |
| ndelay(SPINUNIT); |
| } |
| |
| mce_reign(); |
| barrier(); |
| ret = 0; |
| } else { |
| /* |
| * Subject: Wait for Monarch to finish. |
| */ |
| while (atomic_read(&mce_executing) != 0) { |
| if (mce_timed_out(&timeout)) |
| goto reset; |
| ndelay(SPINUNIT); |
| } |
| |
| /* |
| * Don't reset anything. That's done by the Monarch. |
| */ |
| return 0; |
| } |
| |
| /* |
| * Reset all global state. |
| */ |
| reset: |
| atomic_set(&global_nwo, 0); |
| atomic_set(&mce_callin, 0); |
| barrier(); |
| |
| /* |
| * Let others run again. |
| */ |
| atomic_set(&mce_executing, 0); |
| return ret; |
| } |
| |
| /* |
| * Check if the address reported by the CPU is in a format we can parse. |
| * It would be possible to add code for most other cases, but all would |
| * be somewhat complicated (e.g. segment offset would require an instruction |
| * parser). So only support physical addresses upto page granuality for now. |
| */ |
| static int mce_usable_address(struct mce *m) |
| { |
| if (!(m->status & MCI_STATUS_MISCV) || !(m->status & MCI_STATUS_ADDRV)) |
| return 0; |
| if ((m->misc & 0x3f) > PAGE_SHIFT) |
| return 0; |
| if (((m->misc >> 6) & 7) != MCM_ADDR_PHYS) |
| return 0; |
| return 1; |
| } |
| |
| static void mce_clear_state(unsigned long *toclear) |
| { |
| int i; |
| |
| for (i = 0; i < banks; i++) { |
| if (test_bit(i, toclear)) |
| mce_wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); |
| } |
| } |
| |
| /* |
| * The actual machine check handler. This only handles real |
| * exceptions when something got corrupted coming in through int 18. |
| * |
| * This is executed in NMI context not subject to normal locking rules. This |
| * implies that most kernel services cannot be safely used. Don't even |
| * think about putting a printk in there! |
| * |
| * On Intel systems this is entered on all CPUs in parallel through |
| * MCE broadcast. However some CPUs might be broken beyond repair, |
| * so be always careful when synchronizing with others. |
| */ |
| void do_machine_check(struct pt_regs *regs, long error_code) |
| { |
| struct mce m, *final; |
| int i; |
| int worst = 0; |
| int severity; |
| /* |
| * Establish sequential order between the CPUs entering the machine |
| * check handler. |
| */ |
| int order; |
| /* |
| * If no_way_out gets set, there is no safe way to recover from this |
| * MCE. If tolerant is cranked up, we'll try anyway. |
| */ |
| int no_way_out = 0; |
| /* |
| * If kill_it gets set, there might be a way to recover from this |
| * error. |
| */ |
| int kill_it = 0; |
| DECLARE_BITMAP(toclear, MAX_NR_BANKS); |
| char *msg = "Unknown"; |
| |
| atomic_inc(&mce_entry); |
| |
| __get_cpu_var(mce_exception_count)++; |
| |
| if (notify_die(DIE_NMI, "machine check", regs, error_code, |
| 18, SIGKILL) == NOTIFY_STOP) |
| goto out; |
| if (!banks) |
| goto out; |
| |
| mce_setup(&m); |
| |
| m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS); |
| no_way_out = mce_no_way_out(&m, &msg); |
| |
| final = &__get_cpu_var(mces_seen); |
| *final = m; |
| |
| barrier(); |
| |
| /* |
| * When no restart IP must always kill or panic. |
| */ |
| if (!(m.mcgstatus & MCG_STATUS_RIPV)) |
| kill_it = 1; |
| |
| /* |
| * Go through all the banks in exclusion of the other CPUs. |
| * This way we don't report duplicated events on shared banks |
| * because the first one to see it will clear it. |
| */ |
| order = mce_start(&no_way_out); |
| for (i = 0; i < banks; i++) { |
| __clear_bit(i, toclear); |
| if (!bank[i]) |
| continue; |
| |
| m.misc = 0; |
| m.addr = 0; |
| m.bank = i; |
| |
| m.status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4); |
| if ((m.status & MCI_STATUS_VAL) == 0) |
| continue; |
| |
| /* |
| * Non uncorrected or non signaled errors are handled by |
| * machine_check_poll. Leave them alone, unless this panics. |
| */ |
| if (!(m.status & (mce_ser ? MCI_STATUS_S : MCI_STATUS_UC)) && |
| !no_way_out) |
| continue; |
| |
| /* |
| * Set taint even when machine check was not enabled. |
| */ |
| add_taint(TAINT_MACHINE_CHECK); |
| |
| severity = mce_severity(&m, tolerant, NULL); |
| |
| /* |
| * When machine check was for corrected handler don't touch, |
| * unless we're panicing. |
| */ |
| if (severity == MCE_KEEP_SEVERITY && !no_way_out) |
| continue; |
| __set_bit(i, toclear); |
| if (severity == MCE_NO_SEVERITY) { |
| /* |
| * Machine check event was not enabled. Clear, but |
| * ignore. |
| */ |
| continue; |
| } |
| |
| /* |
| * Kill on action required. |
| */ |
| if (severity == MCE_AR_SEVERITY) |
| kill_it = 1; |
| |
| if (m.status & MCI_STATUS_MISCV) |
| m.misc = mce_rdmsrl(MSR_IA32_MC0_MISC + i*4); |
| if (m.status & MCI_STATUS_ADDRV) |
| m.addr = mce_rdmsrl(MSR_IA32_MC0_ADDR + i*4); |
| |
| /* |
| * Action optional error. Queue address for later processing. |
| * When the ring overflows we just ignore the AO error. |
| * RED-PEN add some logging mechanism when |
| * usable_address or mce_add_ring fails. |
| * RED-PEN don't ignore overflow for tolerant == 0 |
| */ |
| if (severity == MCE_AO_SEVERITY && mce_usable_address(&m)) |
| mce_ring_add(m.addr >> PAGE_SHIFT); |
| |
| mce_get_rip(&m, regs); |
| mce_log(&m); |
| |
| if (severity > worst) { |
| *final = m; |
| worst = severity; |
| } |
| } |
| |
| if (!no_way_out) |
| mce_clear_state(toclear); |
| |
| /* |
| * Do most of the synchronization with other CPUs. |
| * When there's any problem use only local no_way_out state. |
| */ |
| if (mce_end(order) < 0) |
| no_way_out = worst >= MCE_PANIC_SEVERITY; |
| |
| /* |
| * If we have decided that we just CAN'T continue, and the user |
| * has not set tolerant to an insane level, give up and die. |
| * |
| * This is mainly used in the case when the system doesn't |
| * support MCE broadcasting or it has been disabled. |
| */ |
| if (no_way_out && tolerant < 3) |
| mce_panic("Fatal machine check on current CPU", final, msg); |
| |
| /* |
| * If the error seems to be unrecoverable, something should be |
| * done. Try to kill as little as possible. If we can kill just |
| * one task, do that. If the user has set the tolerance very |
| * high, don't try to do anything at all. |
| */ |
| |
| if (kill_it && tolerant < 3) |
| force_sig(SIGBUS, current); |
| |
| /* notify userspace ASAP */ |
| set_thread_flag(TIF_MCE_NOTIFY); |
| |
| if (worst > 0) |
| mce_report_event(regs); |
| mce_wrmsrl(MSR_IA32_MCG_STATUS, 0); |
| out: |
| atomic_dec(&mce_entry); |
| sync_core(); |
| } |
| EXPORT_SYMBOL_GPL(do_machine_check); |
| |
| /* dummy to break dependency. actual code is in mm/memory-failure.c */ |
| void __attribute__((weak)) memory_failure(unsigned long pfn, int vector) |
| { |
| printk(KERN_ERR "Action optional memory failure at %lx ignored\n", pfn); |
| } |
| |
| /* |
| * Called after mce notification in process context. This code |
| * is allowed to sleep. Call the high level VM handler to process |
| * any corrupted pages. |
| * Assume that the work queue code only calls this one at a time |
| * per CPU. |
| * Note we don't disable preemption, so this code might run on the wrong |
| * CPU. In this case the event is picked up by the scheduled work queue. |
| * This is merely a fast path to expedite processing in some common |
| * cases. |
| */ |
| void mce_notify_process(void) |
| { |
| unsigned long pfn; |
| mce_notify_irq(); |
| while (mce_ring_get(&pfn)) |
| memory_failure(pfn, MCE_VECTOR); |
| } |
| |
| static void mce_process_work(struct work_struct *dummy) |
| { |
| mce_notify_process(); |
| } |
| |
| #ifdef CONFIG_X86_MCE_INTEL |
| /*** |
| * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog |
| * @cpu: The CPU on which the event occurred. |
| * @status: Event status information |
| * |
| * This function should be called by the thermal interrupt after the |
| * event has been processed and the decision was made to log the event |
| * further. |
| * |
| * The status parameter will be saved to the 'status' field of 'struct mce' |
| * and historically has been the register value of the |
| * MSR_IA32_THERMAL_STATUS (Intel) msr. |
| */ |
| void mce_log_therm_throt_event(__u64 status) |
| { |
| struct mce m; |
| |
| mce_setup(&m); |
| m.bank = MCE_THERMAL_BANK; |
| m.status = status; |
| mce_log(&m); |
| } |
| #endif /* CONFIG_X86_MCE_INTEL */ |
| |
| /* |
| * Periodic polling timer for "silent" machine check errors. If the |
| * poller finds an MCE, poll 2x faster. When the poller finds no more |
| * errors, poll 2x slower (up to check_interval seconds). |
| */ |
| static int check_interval = 5 * 60; /* 5 minutes */ |
| |
| static DEFINE_PER_CPU(int, next_interval); /* in jiffies */ |
| static DEFINE_PER_CPU(struct timer_list, mce_timer); |
| |
| static void mcheck_timer(unsigned long data) |
| { |
| struct timer_list *t = &per_cpu(mce_timer, data); |
| int *n; |
| |
| WARN_ON(smp_processor_id() != data); |
| |
| if (mce_available(¤t_cpu_data)) { |
| machine_check_poll(MCP_TIMESTAMP, |
| &__get_cpu_var(mce_poll_banks)); |
| } |
| |
| /* |
| * Alert userspace if needed. If we logged an MCE, reduce the |
| * polling interval, otherwise increase the polling interval. |
| */ |
| n = &__get_cpu_var(next_interval); |
| if (mce_notify_irq()) |
| *n = max(*n/2, HZ/100); |
| else |
| *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ)); |
| |
| t->expires = jiffies + *n; |
| add_timer(t); |
| } |
| |
| static void mce_do_trigger(struct work_struct *work) |
| { |
| call_usermodehelper(mce_helper, mce_helper_argv, NULL, UMH_NO_WAIT); |
| } |
| |
| static DECLARE_WORK(mce_trigger_work, mce_do_trigger); |
| |
| /* |
| * Notify the user(s) about new machine check events. |
| * Can be called from interrupt context, but not from machine check/NMI |
| * context. |
| */ |
| int mce_notify_irq(void) |
| { |
| /* Not more than two messages every minute */ |
| static DEFINE_RATELIMIT_STATE(ratelimit, 60*HZ, 2); |
| |
| clear_thread_flag(TIF_MCE_NOTIFY); |
| |
| if (test_and_clear_bit(0, &mce_need_notify)) { |
| wake_up_interruptible(&mce_wait); |
| |
| /* |
| * There is no risk of missing notifications because |
| * work_pending is always cleared before the function is |
| * executed. |
| */ |
| if (mce_helper[0] && !work_pending(&mce_trigger_work)) |
| schedule_work(&mce_trigger_work); |
| |
| if (__ratelimit(&ratelimit)) |
| printk(KERN_INFO "Machine check events logged\n"); |
| |
| return 1; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mce_notify_irq); |
| |
| /* |
| * Initialize Machine Checks for a CPU. |
| */ |
| static int mce_cap_init(void) |
| { |
| unsigned b; |
| u64 cap; |
| |
| rdmsrl(MSR_IA32_MCG_CAP, cap); |
| |
| b = cap & MCG_BANKCNT_MASK; |
| printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b); |
| |
| if (b > MAX_NR_BANKS) { |
| printk(KERN_WARNING |
| "MCE: Using only %u machine check banks out of %u\n", |
| MAX_NR_BANKS, b); |
| b = MAX_NR_BANKS; |
| } |
| |
| /* Don't support asymmetric configurations today */ |
| WARN_ON(banks != 0 && b != banks); |
| banks = b; |
| if (!bank) { |
| bank = kmalloc(banks * sizeof(u64), GFP_KERNEL); |
| if (!bank) |
| return -ENOMEM; |
| memset(bank, 0xff, banks * sizeof(u64)); |
| } |
| |
| /* Use accurate RIP reporting if available. */ |
| if ((cap & MCG_EXT_P) && MCG_EXT_CNT(cap) >= 9) |
| rip_msr = MSR_IA32_MCG_EIP; |
| |
| if (cap & MCG_SER_P) |
| mce_ser = 1; |
| |
| return 0; |
| } |
| |
| static void mce_init(void) |
| { |
| mce_banks_t all_banks; |
| u64 cap; |
| int i; |
| |
| /* |
| * Log the machine checks left over from the previous reset. |
| */ |
| bitmap_fill(all_banks, MAX_NR_BANKS); |
| machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks); |
| |
| set_in_cr4(X86_CR4_MCE); |
| |
| rdmsrl(MSR_IA32_MCG_CAP, cap); |
| if (cap & MCG_CTL_P) |
| wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); |
| |
| for (i = 0; i < banks; i++) { |
| if (skip_bank_init(i)) |
| continue; |
| wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); |
| wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); |
| } |
| } |
| |
| /* Add per CPU specific workarounds here */ |
| static void mce_cpu_quirks(struct cpuinfo_x86 *c) |
| { |
| /* This should be disabled by the BIOS, but isn't always */ |
| if (c->x86_vendor == X86_VENDOR_AMD) { |
| if (c->x86 == 15 && banks > 4) { |
| /* |
| * disable GART TBL walk error reporting, which |
| * trips off incorrectly with the IOMMU & 3ware |
| * & Cerberus: |
| */ |
| clear_bit(10, (unsigned long *)&bank[4]); |
| } |
| if (c->x86 <= 17 && mce_bootlog < 0) { |
| /* |
| * Lots of broken BIOS around that don't clear them |
| * by default and leave crap in there. Don't log: |
| */ |
| mce_bootlog = 0; |
| } |
| /* |
| * Various K7s with broken bank 0 around. Always disable |
| * by default. |
| */ |
| if (c->x86 == 6 && banks > 0) |
| bank[0] = 0; |
| } |
| |
| if (c->x86_vendor == X86_VENDOR_INTEL) { |
| /* |
| * SDM documents that on family 6 bank 0 should not be written |
| * because it aliases to another special BIOS controlled |
| * register. |
| * But it's not aliased anymore on model 0x1a+ |
| * Don't ignore bank 0 completely because there could be a |
| * valid event later, merely don't write CTL0. |
| */ |
| |
| if (c->x86 == 6 && c->x86_model < 0x1A) |
| __set_bit(0, &dont_init_banks); |
| |
| /* |
| * All newer Intel systems support MCE broadcasting. Enable |
| * synchronization with a one second timeout. |
| */ |
| if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) && |
| monarch_timeout < 0) |
| monarch_timeout = USEC_PER_SEC; |
| } |
| if (monarch_timeout < 0) |
| monarch_timeout = 0; |
| if (mce_bootlog != 0) |
| mce_panic_timeout = 30; |
| } |
| |
| static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c) |
| { |
| if (c->x86 != 5) |
| return; |
| switch (c->x86_vendor) { |
| case X86_VENDOR_INTEL: |
| intel_p5_mcheck_init(c); |
| break; |
| case X86_VENDOR_CENTAUR: |
| winchip_mcheck_init(c); |
| break; |
| } |
| } |
| |
| static void mce_cpu_features(struct cpuinfo_x86 *c) |
| { |
| switch (c->x86_vendor) { |
| case X86_VENDOR_INTEL: |
| mce_intel_feature_init(c); |
| break; |
| case X86_VENDOR_AMD: |
| mce_amd_feature_init(c); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void mce_init_timer(void) |
| { |
| struct timer_list *t = &__get_cpu_var(mce_timer); |
| int *n = &__get_cpu_var(next_interval); |
| |
| if (mce_ignore_ce) |
| return; |
| |
| *n = check_interval * HZ; |
| if (!*n) |
| return; |
| setup_timer(t, mcheck_timer, smp_processor_id()); |
| t->expires = round_jiffies(jiffies + *n); |
| add_timer(t); |
| } |
| |
| /* |
| * Called for each booted CPU to set up machine checks. |
| * Must be called with preempt off: |
| */ |
| void __cpuinit mcheck_init(struct cpuinfo_x86 *c) |
| { |
| if (mce_disabled) |
| return; |
| |
| mce_ancient_init(c); |
| |
| if (!mce_available(c)) |
| return; |
| |
| if (mce_cap_init() < 0) { |
| mce_disabled = 1; |
| return; |
| } |
| mce_cpu_quirks(c); |
| |
| machine_check_vector = do_machine_check; |
| |
| mce_init(); |
| mce_cpu_features(c); |
| mce_init_timer(); |
| INIT_WORK(&__get_cpu_var(mce_work), mce_process_work); |
| } |
| |
| /* |
| * Character device to read and clear the MCE log. |
| */ |
| |
| static DEFINE_SPINLOCK(mce_state_lock); |
| static int open_count; /* #times opened */ |
| static int open_exclu; /* already open exclusive? */ |
| |
| static int mce_open(struct inode *inode, struct file *file) |
| { |
| spin_lock(&mce_state_lock); |
| |
| if (open_exclu || (open_count && (file->f_flags & O_EXCL))) { |
| spin_unlock(&mce_state_lock); |
| |
| return -EBUSY; |
| } |
| |
| if (file->f_flags & O_EXCL) |
| open_exclu = 1; |
| open_count++; |
| |
| spin_unlock(&mce_state_lock); |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static int mce_release(struct inode *inode, struct file *file) |
| { |
| spin_lock(&mce_state_lock); |
| |
| open_count--; |
| open_exclu = 0; |
| |
| spin_unlock(&mce_state_lock); |
| |
| return 0; |
| } |
| |
| static void collect_tscs(void *data) |
| { |
| unsigned long *cpu_tsc = (unsigned long *)data; |
| |
| rdtscll(cpu_tsc[smp_processor_id()]); |
| } |
| |
| static DEFINE_MUTEX(mce_read_mutex); |
| |
| static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize, |
| loff_t *off) |
| { |
| char __user *buf = ubuf; |
| unsigned long *cpu_tsc; |
| unsigned prev, next; |
| int i, err; |
| |
| cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL); |
| if (!cpu_tsc) |
| return -ENOMEM; |
| |
| mutex_lock(&mce_read_mutex); |
| next = rcu_dereference(mcelog.next); |
| |
| /* Only supports full reads right now */ |
| if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) { |
| mutex_unlock(&mce_read_mutex); |
| kfree(cpu_tsc); |
| |
| return -EINVAL; |
| } |
| |
| err = 0; |
| prev = 0; |
| do { |
| for (i = prev; i < next; i++) { |
| unsigned long start = jiffies; |
| |
| while (!mcelog.entry[i].finished) { |
| if (time_after_eq(jiffies, start + 2)) { |
| memset(mcelog.entry + i, 0, |
| sizeof(struct mce)); |
| goto timeout; |
| } |
| cpu_relax(); |
| } |
| smp_rmb(); |
| err |= copy_to_user(buf, mcelog.entry + i, |
| sizeof(struct mce)); |
| buf += sizeof(struct mce); |
| timeout: |
| ; |
| } |
| |
| memset(mcelog.entry + prev, 0, |
| (next - prev) * sizeof(struct mce)); |
| prev = next; |
| next = cmpxchg(&mcelog.next, prev, 0); |
| } while (next != prev); |
| |
| synchronize_sched(); |
| |
| /* |
| * Collect entries that were still getting written before the |
| * synchronize. |
| */ |
| on_each_cpu(collect_tscs, cpu_tsc, 1); |
| |
| for (i = next; i < MCE_LOG_LEN; i++) { |
| if (mcelog.entry[i].finished && |
| mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) { |
| err |= copy_to_user(buf, mcelog.entry+i, |
| sizeof(struct mce)); |
| smp_rmb(); |
| buf += sizeof(struct mce); |
| memset(&mcelog.entry[i], 0, sizeof(struct mce)); |
| } |
| } |
| mutex_unlock(&mce_read_mutex); |
| kfree(cpu_tsc); |
| |
| return err ? -EFAULT : buf - ubuf; |
| } |
| |
| static unsigned int mce_poll(struct file *file, poll_table *wait) |
| { |
| poll_wait(file, &mce_wait, wait); |
| if (rcu_dereference(mcelog.next)) |
| return POLLIN | POLLRDNORM; |
| return 0; |
| } |
| |
| static long mce_ioctl(struct file *f, unsigned int cmd, unsigned long arg) |
| { |
| int __user *p = (int __user *)arg; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| switch (cmd) { |
| case MCE_GET_RECORD_LEN: |
| return put_user(sizeof(struct mce), p); |
| case MCE_GET_LOG_LEN: |
| return put_user(MCE_LOG_LEN, p); |
| case MCE_GETCLEAR_FLAGS: { |
| unsigned flags; |
| |
| do { |
| flags = mcelog.flags; |
| } while (cmpxchg(&mcelog.flags, flags, 0) != flags); |
| |
| return put_user(flags, p); |
| } |
| default: |
| return -ENOTTY; |
| } |
| } |
| |
| /* Modified in mce-inject.c, so not static or const */ |
| struct file_operations mce_chrdev_ops = { |
| .open = mce_open, |
| .release = mce_release, |
| .read = mce_read, |
| .poll = mce_poll, |
| .unlocked_ioctl = mce_ioctl, |
| }; |
| EXPORT_SYMBOL_GPL(mce_chrdev_ops); |
| |
| static struct miscdevice mce_log_device = { |
| MISC_MCELOG_MINOR, |
| "mcelog", |
| &mce_chrdev_ops, |
| }; |
| |
| /* |
| * mce=off Disables machine check |
| * mce=no_cmci Disables CMCI |
| * mce=dont_log_ce Clears corrected events silently, no log created for CEs. |
| * mce=ignore_ce Disables polling and CMCI, corrected events are not cleared. |
| * mce=TOLERANCELEVEL[,monarchtimeout] (number, see above) |
| * monarchtimeout is how long to wait for other CPUs on machine |
| * check, or 0 to not wait |
| * mce=bootlog Log MCEs from before booting. Disabled by default on AMD. |
| * mce=nobootlog Don't log MCEs from before booting. |
| */ |
| static int __init mcheck_enable(char *str) |
| { |
| if (*str == 0) |
| enable_p5_mce(); |
| if (*str == '=') |
| str++; |
| if (!strcmp(str, "off")) |
| mce_disabled = 1; |
| else if (!strcmp(str, "no_cmci")) |
| mce_cmci_disabled = 1; |
| else if (!strcmp(str, "dont_log_ce")) |
| mce_dont_log_ce = 1; |
| else if (!strcmp(str, "ignore_ce")) |
| mce_ignore_ce = 1; |
| else if (!strcmp(str, "bootlog") || !strcmp(str, "nobootlog")) |
| mce_bootlog = (str[0] == 'b'); |
| else if (isdigit(str[0])) { |
| get_option(&str, &tolerant); |
| if (*str == ',') { |
| ++str; |
| get_option(&str, &monarch_timeout); |
| } |
| } else { |
| printk(KERN_INFO "mce argument %s ignored. Please use /sys\n", |
| str); |
| return 0; |
| } |
| return 1; |
| } |
| __setup("mce", mcheck_enable); |
| |
| /* |
| * Sysfs support |
| */ |
| |
| /* |
| * Disable machine checks on suspend and shutdown. We can't really handle |
| * them later. |
| */ |
| static int mce_disable(void) |
| { |
| int i; |
| |
| for (i = 0; i < banks; i++) { |
| if (!skip_bank_init(i)) |
| wrmsrl(MSR_IA32_MC0_CTL + i*4, 0); |
| } |
| return 0; |
| } |
| |
| static int mce_suspend(struct sys_device *dev, pm_message_t state) |
| { |
| return mce_disable(); |
| } |
| |
| static int mce_shutdown(struct sys_device *dev) |
| { |
| return mce_disable(); |
| } |
| |
| /* |
| * On resume clear all MCE state. Don't want to see leftovers from the BIOS. |
| * Only one CPU is active at this time, the others get re-added later using |
| * CPU hotplug: |
| */ |
| static int mce_resume(struct sys_device *dev) |
| { |
| mce_init(); |
| mce_cpu_features(¤t_cpu_data); |
| |
| return 0; |
| } |
| |
| static void mce_cpu_restart(void *data) |
| { |
| del_timer_sync(&__get_cpu_var(mce_timer)); |
| if (!mce_available(¤t_cpu_data)) |
| return; |
| mce_init(); |
| mce_init_timer(); |
| } |
| |
| /* Reinit MCEs after user configuration changes */ |
| static void mce_restart(void) |
| { |
| on_each_cpu(mce_cpu_restart, NULL, 1); |
| } |
| |
| /* Toggle features for corrected errors */ |
| static void mce_disable_ce(void *all) |
| { |
| if (!mce_available(¤t_cpu_data)) |
| return; |
| if (all) |
| del_timer_sync(&__get_cpu_var(mce_timer)); |
| cmci_clear(); |
| } |
| |
| static void mce_enable_ce(void *all) |
| { |
| if (!mce_available(¤t_cpu_data)) |
| return; |
| cmci_reenable(); |
| cmci_recheck(); |
| if (all) |
| mce_init_timer(); |
| } |
| |
| static struct sysdev_class mce_sysclass = { |
| .suspend = mce_suspend, |
| .shutdown = mce_shutdown, |
| .resume = mce_resume, |
| .name = "machinecheck", |
| }; |
| |
| DEFINE_PER_CPU(struct sys_device, mce_dev); |
| |
| __cpuinitdata |
| void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu); |
| |
| static struct sysdev_attribute *bank_attrs; |
| |
| static ssize_t show_bank(struct sys_device *s, struct sysdev_attribute *attr, |
| char *buf) |
| { |
| u64 b = bank[attr - bank_attrs]; |
| |
| return sprintf(buf, "%llx\n", b); |
| } |
| |
| static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr, |
| const char *buf, size_t size) |
| { |
| u64 new; |
| |
| if (strict_strtoull(buf, 0, &new) < 0) |
| return -EINVAL; |
| |
| bank[attr - bank_attrs] = new; |
| mce_restart(); |
| |
| return size; |
| } |
| |
| static ssize_t |
| show_trigger(struct sys_device *s, struct sysdev_attribute *attr, char *buf) |
| { |
| strcpy(buf, mce_helper); |
| strcat(buf, "\n"); |
| return strlen(mce_helper) + 1; |
| } |
| |
| static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr, |
| const char *buf, size_t siz) |
| { |
| char *p; |
| int len; |
| |
| strncpy(mce_helper, buf, sizeof(mce_helper)); |
| mce_helper[sizeof(mce_helper)-1] = 0; |
| len = strlen(mce_helper); |
| p = strchr(mce_helper, '\n'); |
| |
| if (*p) |
| *p = 0; |
| |
| return len; |
| } |
| |
| static ssize_t set_ignore_ce(struct sys_device *s, |
| struct sysdev_attribute *attr, |
| const char *buf, size_t size) |
| { |
| u64 new; |
| |
| if (strict_strtoull(buf, 0, &new) < 0) |
| return -EINVAL; |
| |
| if (mce_ignore_ce ^ !!new) { |
| if (new) { |
| /* disable ce features */ |
| on_each_cpu(mce_disable_ce, (void *)1, 1); |
| mce_ignore_ce = 1; |
| } else { |
| /* enable ce features */ |
| mce_ignore_ce = 0; |
| on_each_cpu(mce_enable_ce, (void *)1, 1); |
| } |
| } |
| return size; |
| } |
| |
| static ssize_t set_cmci_disabled(struct sys_device *s, |
| struct sysdev_attribute *attr, |
| const char *buf, size_t size) |
| { |
| u64 new; |
| |
| if (strict_strtoull(buf, 0, &new) < 0) |
| return -EINVAL; |
| |
| if (mce_cmci_disabled ^ !!new) { |
| if (new) { |
| /* disable cmci */ |
| on_each_cpu(mce_disable_ce, NULL, 1); |
| mce_cmci_disabled = 1; |
| } else { |
| /* enable cmci */ |
| mce_cmci_disabled = 0; |
| on_each_cpu(mce_enable_ce, NULL, 1); |
| } |
| } |
| return size; |
| } |
| |
| static ssize_t store_int_with_restart(struct sys_device *s, |
| struct sysdev_attribute *attr, |
| const char *buf, size_t size) |
| { |
| ssize_t ret = sysdev_store_int(s, attr, buf, size); |
| mce_restart(); |
| return ret; |
| } |
| |
| static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger); |
| static SYSDEV_INT_ATTR(tolerant, 0644, tolerant); |
| static SYSDEV_INT_ATTR(monarch_timeout, 0644, monarch_timeout); |
| static SYSDEV_INT_ATTR(dont_log_ce, 0644, mce_dont_log_ce); |
| |
| static struct sysdev_ext_attribute attr_check_interval = { |
| _SYSDEV_ATTR(check_interval, 0644, sysdev_show_int, |
| store_int_with_restart), |
| &check_interval |
| }; |
| |
| static struct sysdev_ext_attribute attr_ignore_ce = { |
| _SYSDEV_ATTR(ignore_ce, 0644, sysdev_show_int, set_ignore_ce), |
| &mce_ignore_ce |
| }; |
| |
| static struct sysdev_ext_attribute attr_cmci_disabled = { |
| _SYSDEV_ATTR(cmci_disabled, 0644, sysdev_show_int, set_cmci_disabled), |
| &mce_cmci_disabled |
| }; |
| |
| static struct sysdev_attribute *mce_attrs[] = { |
| &attr_tolerant.attr, |
| &attr_check_interval.attr, |
| &attr_trigger, |
| &attr_monarch_timeout.attr, |
| &attr_dont_log_ce.attr, |
| &attr_ignore_ce.attr, |
| &attr_cmci_disabled.attr, |
| NULL |
| }; |
| |
| static cpumask_var_t mce_dev_initialized; |
| |
| /* Per cpu sysdev init. All of the cpus still share the same ctrl bank: */ |
| static __cpuinit int mce_create_device(unsigned int cpu) |
| { |
| int err; |
| int i, j; |
| |
| if (!mce_available(&boot_cpu_data)) |
| return -EIO; |
| |
| memset(&per_cpu(mce_dev, cpu).kobj, 0, sizeof(struct kobject)); |
| per_cpu(mce_dev, cpu).id = cpu; |
| per_cpu(mce_dev, cpu).cls = &mce_sysclass; |
| |
| err = sysdev_register(&per_cpu(mce_dev, cpu)); |
| if (err) |
| return err; |
| |
| for (i = 0; mce_attrs[i]; i++) { |
| err = sysdev_create_file(&per_cpu(mce_dev, cpu), mce_attrs[i]); |
| if (err) |
| goto error; |
| } |
| for (j = 0; j < banks; j++) { |
| err = sysdev_create_file(&per_cpu(mce_dev, cpu), |
| &bank_attrs[j]); |
| if (err) |
| goto error2; |
| } |
| cpumask_set_cpu(cpu, mce_dev_initialized); |
| |
| return 0; |
| error2: |
| while (--j >= 0) |
| sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[j]); |
| error: |
| while (--i >= 0) |
| sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]); |
| |
| sysdev_unregister(&per_cpu(mce_dev, cpu)); |
| |
| return err; |
| } |
| |
| static __cpuinit void mce_remove_device(unsigned int cpu) |
| { |
| int i; |
| |
| if (!cpumask_test_cpu(cpu, mce_dev_initialized)) |
| return; |
| |
| for (i = 0; mce_attrs[i]; i++) |
| sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]); |
| |
| for (i = 0; i < banks; i++) |
| sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[i]); |
| |
| sysdev_unregister(&per_cpu(mce_dev, cpu)); |
| cpumask_clear_cpu(cpu, mce_dev_initialized); |
| } |
| |
| /* Make sure there are no machine checks on offlined CPUs. */ |
| static void mce_disable_cpu(void *h) |
| { |
| unsigned long action = *(unsigned long *)h; |
| int i; |
| |
| if (!mce_available(¤t_cpu_data)) |
| return; |
| if (!(action & CPU_TASKS_FROZEN)) |
| cmci_clear(); |
| for (i = 0; i < banks; i++) { |
| if (!skip_bank_init(i)) |
| wrmsrl(MSR_IA32_MC0_CTL + i*4, 0); |
| } |
| } |
| |
| static void mce_reenable_cpu(void *h) |
| { |
| unsigned long action = *(unsigned long *)h; |
| int i; |
| |
| if (!mce_available(¤t_cpu_data)) |
| return; |
| |
| if (!(action & CPU_TASKS_FROZEN)) |
| cmci_reenable(); |
| for (i = 0; i < banks; i++) { |
| if (!skip_bank_init(i)) |
| wrmsrl(MSR_IA32_MC0_CTL + i*4, bank[i]); |
| } |
| } |
| |
| /* Get notified when a cpu comes on/off. Be hotplug friendly. */ |
| static int __cpuinit |
| mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) |
| { |
| unsigned int cpu = (unsigned long)hcpu; |
| struct timer_list *t = &per_cpu(mce_timer, cpu); |
| |
| switch (action) { |
| case CPU_ONLINE: |
| case CPU_ONLINE_FROZEN: |
| mce_create_device(cpu); |
| if (threshold_cpu_callback) |
| threshold_cpu_callback(action, cpu); |
| break; |
| case CPU_DEAD: |
| case CPU_DEAD_FROZEN: |
| if (threshold_cpu_callback) |
| threshold_cpu_callback(action, cpu); |
| mce_remove_device(cpu); |
| break; |
| case CPU_DOWN_PREPARE: |
| case CPU_DOWN_PREPARE_FROZEN: |
| del_timer_sync(t); |
| smp_call_function_single(cpu, mce_disable_cpu, &action, 1); |
| break; |
| case CPU_DOWN_FAILED: |
| case CPU_DOWN_FAILED_FROZEN: |
| t->expires = round_jiffies(jiffies + |
| __get_cpu_var(next_interval)); |
| add_timer_on(t, cpu); |
| smp_call_function_single(cpu, mce_reenable_cpu, &action, 1); |
| break; |
| case CPU_POST_DEAD: |
| /* intentionally ignoring frozen here */ |
| cmci_rediscover(cpu); |
| break; |
| } |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block mce_cpu_notifier __cpuinitdata = { |
| .notifier_call = mce_cpu_callback, |
| }; |
| |
| static __init int mce_init_banks(void) |
| { |
| int i; |
| |
| bank_attrs = kzalloc(sizeof(struct sysdev_attribute) * banks, |
| GFP_KERNEL); |
| if (!bank_attrs) |
| return -ENOMEM; |
| |
| for (i = 0; i < banks; i++) { |
| struct sysdev_attribute *a = &bank_attrs[i]; |
| |
| a->attr.name = kasprintf(GFP_KERNEL, "bank%d", i); |
| if (!a->attr.name) |
| goto nomem; |
| |
| a->attr.mode = 0644; |
| a->show = show_bank; |
| a->store = set_bank; |
| } |
| return 0; |
| |
| nomem: |
| while (--i >= 0) |
| kfree(bank_attrs[i].attr.name); |
| kfree(bank_attrs); |
| bank_attrs = NULL; |
| |
| return -ENOMEM; |
| } |
| |
| static __init int mce_init_device(void) |
| { |
| int err; |
| int i = 0; |
| |
| if (!mce_available(&boot_cpu_data)) |
| return -EIO; |
| |
| zalloc_cpumask_var(&mce_dev_initialized, GFP_KERNEL); |
| |
| err = mce_init_banks(); |
| if (err) |
| return err; |
| |
| err = sysdev_class_register(&mce_sysclass); |
| if (err) |
| return err; |
| |
| for_each_online_cpu(i) { |
| err = mce_create_device(i); |
| if (err) |
| return err; |
| } |
| |
| register_hotcpu_notifier(&mce_cpu_notifier); |
| misc_register(&mce_log_device); |
| |
| return err; |
| } |
| |
| device_initcall(mce_init_device); |
| |
| #else /* CONFIG_X86_OLD_MCE: */ |
| |
| int nr_mce_banks; |
| EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */ |
| |
| /* This has to be run for each processor */ |
| void mcheck_init(struct cpuinfo_x86 *c) |
| { |
| if (mce_disabled) |
| return; |
| |
| switch (c->x86_vendor) { |
| case X86_VENDOR_AMD: |
| amd_mcheck_init(c); |
| break; |
| |
| case X86_VENDOR_INTEL: |
| if (c->x86 == 5) |
| intel_p5_mcheck_init(c); |
| if (c->x86 == 6) |
| intel_p6_mcheck_init(c); |
| if (c->x86 == 15) |
| intel_p4_mcheck_init(c); |
| break; |
| |
| case X86_VENDOR_CENTAUR: |
| if (c->x86 == 5) |
| winchip_mcheck_init(c); |
| break; |
| |
| default: |
| break; |
| } |
| printk(KERN_INFO "mce: CPU supports %d MCE banks\n", nr_mce_banks); |
| } |
| |
| static int __init mcheck_enable(char *str) |
| { |
| mce_p5_enabled = 1; |
| return 1; |
| } |
| __setup("mce", mcheck_enable); |
| |
| #endif /* CONFIG_X86_OLD_MCE */ |
| |
| /* |
| * Old style boot options parsing. Only for compatibility. |
| */ |
| static int __init mcheck_disable(char *str) |
| { |
| mce_disabled = 1; |
| return 1; |
| } |
| __setup("nomce", mcheck_disable); |