| /********************************************************************** |
| * Author: Cavium Networks |
| * |
| * Contact: support@caviumnetworks.com |
| * This file is part of the OCTEON SDK |
| * |
| * Copyright (c) 2003-2007 Cavium Networks |
| * |
| * This file is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, Version 2, as |
| * published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, but |
| * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or |
| * NONINFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this file; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * or visit http://www.gnu.org/licenses/. |
| * |
| * This file may also be available under a different license from Cavium. |
| * Contact Cavium Networks for more information |
| **********************************************************************/ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/delay.h> |
| #include <linux/mii.h> |
| |
| #include <net/dst.h> |
| |
| #include <asm/octeon/octeon.h> |
| |
| #include "ethernet-defines.h" |
| #include "ethernet-mem.h" |
| #include "ethernet-rx.h" |
| #include "ethernet-tx.h" |
| #include "ethernet-util.h" |
| #include "ethernet-proc.h" |
| #include "ethernet-common.h" |
| #include "octeon-ethernet.h" |
| |
| #include "cvmx-pip.h" |
| #include "cvmx-pko.h" |
| #include "cvmx-fau.h" |
| #include "cvmx-ipd.h" |
| #include "cvmx-helper.h" |
| |
| #include "cvmx-smix-defs.h" |
| |
| #if defined(CONFIG_CAVIUM_OCTEON_NUM_PACKET_BUFFERS) \ |
| && CONFIG_CAVIUM_OCTEON_NUM_PACKET_BUFFERS |
| int num_packet_buffers = CONFIG_CAVIUM_OCTEON_NUM_PACKET_BUFFERS; |
| #else |
| int num_packet_buffers = 1024; |
| #endif |
| module_param(num_packet_buffers, int, 0444); |
| MODULE_PARM_DESC(num_packet_buffers, "\n" |
| "\tNumber of packet buffers to allocate and store in the\n" |
| "\tFPA. By default, 1024 packet buffers are used unless\n" |
| "\tCONFIG_CAVIUM_OCTEON_NUM_PACKET_BUFFERS is defined."); |
| |
| int pow_receive_group = 15; |
| module_param(pow_receive_group, int, 0444); |
| MODULE_PARM_DESC(pow_receive_group, "\n" |
| "\tPOW group to receive packets from. All ethernet hardware\n" |
| "\twill be configured to send incomming packets to this POW\n" |
| "\tgroup. Also any other software can submit packets to this\n" |
| "\tgroup for the kernel to process."); |
| |
| int pow_send_group = -1; |
| module_param(pow_send_group, int, 0644); |
| MODULE_PARM_DESC(pow_send_group, "\n" |
| "\tPOW group to send packets to other software on. This\n" |
| "\tcontrols the creation of the virtual device pow0.\n" |
| "\talways_use_pow also depends on this value."); |
| |
| int always_use_pow; |
| module_param(always_use_pow, int, 0444); |
| MODULE_PARM_DESC(always_use_pow, "\n" |
| "\tWhen set, always send to the pow group. This will cause\n" |
| "\tpackets sent to real ethernet devices to be sent to the\n" |
| "\tPOW group instead of the hardware. Unless some other\n" |
| "\tapplication changes the config, packets will still be\n" |
| "\treceived from the low level hardware. Use this option\n" |
| "\tto allow a CVMX app to intercept all packets from the\n" |
| "\tlinux kernel. You must specify pow_send_group along with\n" |
| "\tthis option."); |
| |
| char pow_send_list[128] = ""; |
| module_param_string(pow_send_list, pow_send_list, sizeof(pow_send_list), 0444); |
| MODULE_PARM_DESC(pow_send_list, "\n" |
| "\tComma separated list of ethernet devices that should use the\n" |
| "\tPOW for transmit instead of the actual ethernet hardware. This\n" |
| "\tis a per port version of always_use_pow. always_use_pow takes\n" |
| "\tprecedence over this list. For example, setting this to\n" |
| "\t\"eth2,spi3,spi7\" would cause these three devices to transmit\n" |
| "\tusing the pow_send_group."); |
| |
| static int disable_core_queueing = 1; |
| module_param(disable_core_queueing, int, 0444); |
| MODULE_PARM_DESC(disable_core_queueing, "\n" |
| "\tWhen set the networking core's tx_queue_len is set to zero. This\n" |
| "\tallows packets to be sent without lock contention in the packet\n" |
| "\tscheduler resulting in some cases in improved throughput.\n"); |
| |
| /** |
| * Periodic timer to check auto negotiation |
| */ |
| static struct timer_list cvm_oct_poll_timer; |
| |
| /** |
| * Array of every ethernet device owned by this driver indexed by |
| * the ipd input port number. |
| */ |
| struct net_device *cvm_oct_device[TOTAL_NUMBER_OF_PORTS]; |
| |
| extern struct semaphore mdio_sem; |
| |
| /** |
| * Periodic timer tick for slow management operations |
| * |
| * @arg: Device to check |
| */ |
| static void cvm_do_timer(unsigned long arg) |
| { |
| static int port; |
| if (port < CVMX_PIP_NUM_INPUT_PORTS) { |
| if (cvm_oct_device[port]) { |
| int queues_per_port; |
| int qos; |
| struct octeon_ethernet *priv = |
| netdev_priv(cvm_oct_device[port]); |
| if (priv->poll) { |
| /* skip polling if we don't get the lock */ |
| if (!down_trylock(&mdio_sem)) { |
| priv->poll(cvm_oct_device[port]); |
| up(&mdio_sem); |
| } |
| } |
| |
| queues_per_port = cvmx_pko_get_num_queues(port); |
| /* Drain any pending packets in the free list */ |
| for (qos = 0; qos < queues_per_port; qos++) { |
| if (skb_queue_len(&priv->tx_free_list[qos])) { |
| spin_lock(&priv->tx_free_list[qos]. |
| lock); |
| while (skb_queue_len |
| (&priv->tx_free_list[qos]) > |
| cvmx_fau_fetch_and_add32(priv-> |
| fau + |
| qos * 4, |
| 0)) |
| dev_kfree_skb(__skb_dequeue |
| (&priv-> |
| tx_free_list |
| [qos])); |
| spin_unlock(&priv->tx_free_list[qos]. |
| lock); |
| } |
| } |
| cvm_oct_device[port]->get_stats(cvm_oct_device[port]); |
| } |
| port++; |
| /* Poll the next port in a 50th of a second. |
| This spreads the polling of ports out a little bit */ |
| mod_timer(&cvm_oct_poll_timer, jiffies + HZ / 50); |
| } else { |
| port = 0; |
| /* All ports have been polled. Start the next iteration through |
| the ports in one second */ |
| mod_timer(&cvm_oct_poll_timer, jiffies + HZ); |
| } |
| } |
| |
| /** |
| * Configure common hardware for all interfaces |
| */ |
| static __init void cvm_oct_configure_common_hw(void) |
| { |
| int r; |
| /* Setup the FPA */ |
| cvmx_fpa_enable(); |
| cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL, CVMX_FPA_PACKET_POOL_SIZE, |
| num_packet_buffers); |
| cvm_oct_mem_fill_fpa(CVMX_FPA_WQE_POOL, CVMX_FPA_WQE_POOL_SIZE, |
| num_packet_buffers); |
| if (CVMX_FPA_OUTPUT_BUFFER_POOL != CVMX_FPA_PACKET_POOL) |
| cvm_oct_mem_fill_fpa(CVMX_FPA_OUTPUT_BUFFER_POOL, |
| CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE, 128); |
| |
| if (USE_RED) |
| cvmx_helper_setup_red(num_packet_buffers / 4, |
| num_packet_buffers / 8); |
| |
| /* Enable the MII interface */ |
| if (!octeon_is_simulation()) |
| cvmx_write_csr(CVMX_SMIX_EN(0), 1); |
| |
| /* Register an IRQ hander for to receive POW interrupts */ |
| r = request_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group, |
| cvm_oct_do_interrupt, IRQF_SHARED, "Ethernet", |
| cvm_oct_device); |
| |
| #if defined(CONFIG_SMP) && 0 |
| if (USE_MULTICORE_RECEIVE) { |
| irq_set_affinity(OCTEON_IRQ_WORKQ0 + pow_receive_group, |
| cpu_online_mask); |
| } |
| #endif |
| } |
| |
| /** |
| * Free a work queue entry received in a intercept callback. |
| * |
| * @work_queue_entry: |
| * Work queue entry to free |
| * Returns Zero on success, Negative on failure. |
| */ |
| int cvm_oct_free_work(void *work_queue_entry) |
| { |
| cvmx_wqe_t *work = work_queue_entry; |
| |
| int segments = work->word2.s.bufs; |
| union cvmx_buf_ptr segment_ptr = work->packet_ptr; |
| |
| while (segments--) { |
| union cvmx_buf_ptr next_ptr = *(union cvmx_buf_ptr *) |
| cvmx_phys_to_ptr(segment_ptr.s.addr - 8); |
| if (unlikely(!segment_ptr.s.i)) |
| cvmx_fpa_free(cvm_oct_get_buffer_ptr(segment_ptr), |
| segment_ptr.s.pool, |
| DONT_WRITEBACK(CVMX_FPA_PACKET_POOL_SIZE / |
| 128)); |
| segment_ptr = next_ptr; |
| } |
| cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, DONT_WRITEBACK(1)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(cvm_oct_free_work); |
| |
| /** |
| * Module/ driver initialization. Creates the linux network |
| * devices. |
| * |
| * Returns Zero on success |
| */ |
| static int __init cvm_oct_init_module(void) |
| { |
| int num_interfaces; |
| int interface; |
| int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE; |
| int qos; |
| |
| pr_notice("cavium-ethernet %s\n", OCTEON_ETHERNET_VERSION); |
| |
| cvm_oct_proc_initialize(); |
| cvm_oct_rx_initialize(); |
| cvm_oct_configure_common_hw(); |
| |
| cvmx_helper_initialize_packet_io_global(); |
| |
| /* Change the input group for all ports before input is enabled */ |
| num_interfaces = cvmx_helper_get_number_of_interfaces(); |
| for (interface = 0; interface < num_interfaces; interface++) { |
| int num_ports = cvmx_helper_ports_on_interface(interface); |
| int port; |
| |
| for (port = cvmx_helper_get_ipd_port(interface, 0); |
| port < cvmx_helper_get_ipd_port(interface, num_ports); |
| port++) { |
| union cvmx_pip_prt_tagx pip_prt_tagx; |
| pip_prt_tagx.u64 = |
| cvmx_read_csr(CVMX_PIP_PRT_TAGX(port)); |
| pip_prt_tagx.s.grp = pow_receive_group; |
| cvmx_write_csr(CVMX_PIP_PRT_TAGX(port), |
| pip_prt_tagx.u64); |
| } |
| } |
| |
| cvmx_helper_ipd_and_packet_input_enable(); |
| |
| memset(cvm_oct_device, 0, sizeof(cvm_oct_device)); |
| |
| /* |
| * Initialize the FAU used for counting packet buffers that |
| * need to be freed. |
| */ |
| cvmx_fau_atomic_write32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0); |
| |
| if ((pow_send_group != -1)) { |
| struct net_device *dev; |
| pr_info("\tConfiguring device for POW only access\n"); |
| dev = alloc_etherdev(sizeof(struct octeon_ethernet)); |
| if (dev) { |
| /* Initialize the device private structure. */ |
| struct octeon_ethernet *priv = netdev_priv(dev); |
| memset(priv, 0, sizeof(struct octeon_ethernet)); |
| |
| dev->init = cvm_oct_common_init; |
| priv->imode = CVMX_HELPER_INTERFACE_MODE_DISABLED; |
| priv->port = CVMX_PIP_NUM_INPUT_PORTS; |
| priv->queue = -1; |
| strcpy(dev->name, "pow%d"); |
| for (qos = 0; qos < 16; qos++) |
| skb_queue_head_init(&priv->tx_free_list[qos]); |
| |
| if (register_netdev(dev) < 0) { |
| pr_err("Failed to register ethernet " |
| "device for POW\n"); |
| kfree(dev); |
| } else { |
| cvm_oct_device[CVMX_PIP_NUM_INPUT_PORTS] = dev; |
| pr_info("%s: POW send group %d, receive " |
| "group %d\n", |
| dev->name, pow_send_group, |
| pow_receive_group); |
| } |
| } else { |
| pr_err("Failed to allocate ethernet device " |
| "for POW\n"); |
| } |
| } |
| |
| num_interfaces = cvmx_helper_get_number_of_interfaces(); |
| for (interface = 0; interface < num_interfaces; interface++) { |
| cvmx_helper_interface_mode_t imode = |
| cvmx_helper_interface_get_mode(interface); |
| int num_ports = cvmx_helper_ports_on_interface(interface); |
| int port; |
| |
| for (port = cvmx_helper_get_ipd_port(interface, 0); |
| port < cvmx_helper_get_ipd_port(interface, num_ports); |
| port++) { |
| struct octeon_ethernet *priv; |
| struct net_device *dev = |
| alloc_etherdev(sizeof(struct octeon_ethernet)); |
| if (!dev) { |
| pr_err("Failed to allocate ethernet device " |
| "for port %d\n", port); |
| continue; |
| } |
| if (disable_core_queueing) |
| dev->tx_queue_len = 0; |
| |
| /* Initialize the device private structure. */ |
| priv = netdev_priv(dev); |
| memset(priv, 0, sizeof(struct octeon_ethernet)); |
| |
| priv->imode = imode; |
| priv->port = port; |
| priv->queue = cvmx_pko_get_base_queue(priv->port); |
| priv->fau = fau - cvmx_pko_get_num_queues(port) * 4; |
| for (qos = 0; qos < 16; qos++) |
| skb_queue_head_init(&priv->tx_free_list[qos]); |
| for (qos = 0; qos < cvmx_pko_get_num_queues(port); |
| qos++) |
| cvmx_fau_atomic_write32(priv->fau + qos * 4, 0); |
| |
| switch (priv->imode) { |
| |
| /* These types don't support ports to IPD/PKO */ |
| case CVMX_HELPER_INTERFACE_MODE_DISABLED: |
| case CVMX_HELPER_INTERFACE_MODE_PCIE: |
| case CVMX_HELPER_INTERFACE_MODE_PICMG: |
| break; |
| |
| case CVMX_HELPER_INTERFACE_MODE_NPI: |
| dev->init = cvm_oct_common_init; |
| dev->uninit = cvm_oct_common_uninit; |
| strcpy(dev->name, "npi%d"); |
| break; |
| |
| case CVMX_HELPER_INTERFACE_MODE_XAUI: |
| dev->init = cvm_oct_xaui_init; |
| dev->uninit = cvm_oct_xaui_uninit; |
| strcpy(dev->name, "xaui%d"); |
| break; |
| |
| case CVMX_HELPER_INTERFACE_MODE_LOOP: |
| dev->init = cvm_oct_common_init; |
| dev->uninit = cvm_oct_common_uninit; |
| strcpy(dev->name, "loop%d"); |
| break; |
| |
| case CVMX_HELPER_INTERFACE_MODE_SGMII: |
| dev->init = cvm_oct_sgmii_init; |
| dev->uninit = cvm_oct_sgmii_uninit; |
| strcpy(dev->name, "eth%d"); |
| break; |
| |
| case CVMX_HELPER_INTERFACE_MODE_SPI: |
| dev->init = cvm_oct_spi_init; |
| dev->uninit = cvm_oct_spi_uninit; |
| strcpy(dev->name, "spi%d"); |
| break; |
| |
| case CVMX_HELPER_INTERFACE_MODE_RGMII: |
| case CVMX_HELPER_INTERFACE_MODE_GMII: |
| dev->init = cvm_oct_rgmii_init; |
| dev->uninit = cvm_oct_rgmii_uninit; |
| strcpy(dev->name, "eth%d"); |
| break; |
| } |
| |
| if (!dev->init) { |
| kfree(dev); |
| } else if (register_netdev(dev) < 0) { |
| pr_err("Failed to register ethernet device " |
| "for interface %d, port %d\n", |
| interface, priv->port); |
| kfree(dev); |
| } else { |
| cvm_oct_device[priv->port] = dev; |
| fau -= |
| cvmx_pko_get_num_queues(priv->port) * |
| sizeof(uint32_t); |
| } |
| } |
| } |
| |
| if (INTERRUPT_LIMIT) { |
| /* |
| * Set the POW timer rate to give an interrupt at most |
| * INTERRUPT_LIMIT times per second. |
| */ |
| cvmx_write_csr(CVMX_POW_WQ_INT_PC, |
| octeon_bootinfo->eclock_hz / (INTERRUPT_LIMIT * |
| 16 * 256) << 8); |
| |
| /* |
| * Enable POW timer interrupt. It will count when |
| * there are packets available. |
| */ |
| cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), |
| 0x1ful << 24); |
| } else { |
| /* Enable POW interrupt when our port has at least one packet */ |
| cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), 0x1001); |
| } |
| |
| /* Enable the poll timer for checking RGMII status */ |
| init_timer(&cvm_oct_poll_timer); |
| cvm_oct_poll_timer.data = 0; |
| cvm_oct_poll_timer.function = cvm_do_timer; |
| mod_timer(&cvm_oct_poll_timer, jiffies + HZ); |
| |
| return 0; |
| } |
| |
| /** |
| * Module / driver shutdown |
| * |
| * Returns Zero on success |
| */ |
| static void __exit cvm_oct_cleanup_module(void) |
| { |
| int port; |
| |
| /* Disable POW interrupt */ |
| cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), 0); |
| |
| cvmx_ipd_disable(); |
| |
| /* Free the interrupt handler */ |
| free_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group, cvm_oct_device); |
| |
| del_timer(&cvm_oct_poll_timer); |
| cvm_oct_rx_shutdown(); |
| cvmx_pko_disable(); |
| |
| /* Free the ethernet devices */ |
| for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) { |
| if (cvm_oct_device[port]) { |
| cvm_oct_tx_shutdown(cvm_oct_device[port]); |
| unregister_netdev(cvm_oct_device[port]); |
| kfree(cvm_oct_device[port]); |
| cvm_oct_device[port] = NULL; |
| } |
| } |
| |
| cvmx_pko_shutdown(); |
| cvm_oct_proc_shutdown(); |
| |
| cvmx_ipd_free_ptr(); |
| |
| /* Free the HW pools */ |
| cvm_oct_mem_empty_fpa(CVMX_FPA_PACKET_POOL, CVMX_FPA_PACKET_POOL_SIZE, |
| num_packet_buffers); |
| cvm_oct_mem_empty_fpa(CVMX_FPA_WQE_POOL, CVMX_FPA_WQE_POOL_SIZE, |
| num_packet_buffers); |
| if (CVMX_FPA_OUTPUT_BUFFER_POOL != CVMX_FPA_PACKET_POOL) |
| cvm_oct_mem_empty_fpa(CVMX_FPA_OUTPUT_BUFFER_POOL, |
| CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE, 128); |
| } |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>"); |
| MODULE_DESCRIPTION("Cavium Networks Octeon ethernet driver."); |
| module_init(cvm_oct_init_module); |
| module_exit(cvm_oct_cleanup_module); |