| /* |
| * |
| * BRIEF MODULE DESCRIPTION |
| * IT8172 system controller specific pci support. |
| * |
| * Copyright 2000 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. |
| * ppopov@mvista.com or source@mvista.com |
| * |
| * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| |
| #include <asm/it8172/it8172.h> |
| #include <asm/it8172/it8172_pci.h> |
| |
| #define PCI_ACCESS_READ 0 |
| #define PCI_ACCESS_WRITE 1 |
| |
| #undef DEBUG |
| #ifdef DEBUG |
| #define DBG(x...) printk(x) |
| #else |
| #define DBG(x...) |
| #endif |
| |
| static struct resource pci_mem_resource_1; |
| |
| static struct resource pci_io_resource = { |
| "io pci IO space", |
| 0x14018000, |
| 0x17FFFFFF, |
| IORESOURCE_IO |
| }; |
| |
| static struct resource pci_mem_resource_0 = { |
| "ext pci memory space 0/1", |
| 0x10101000, |
| 0x13FFFFFF, |
| IORESOURCE_MEM, |
| &pci_mem_resource_0, |
| NULL, |
| &pci_mem_resource_1 |
| }; |
| |
| static struct resource pci_mem_resource_1 = { |
| "ext pci memory space 2/3", |
| 0x1A000000, |
| 0x1FBFFFFF, |
| IORESOURCE_MEM, |
| &pci_mem_resource_0, |
| NULL, |
| NULL |
| }; |
| |
| extern struct pci_ops it8172_pci_ops; |
| |
| struct pci_controller it8172_controller = { |
| .pci_ops = &it8172_pci_ops, |
| .io_resource = &pci_io_resource, |
| .mem_resource = &pci_mem_resource_0, |
| }; |
| |
| static int it8172_pcibios_config_access(unsigned char access_type, |
| struct pci_bus *bus, |
| unsigned int devfn, int where, |
| u32 * data) |
| { |
| /* |
| * config cycles are on 4 byte boundary only |
| */ |
| |
| /* Setup address */ |
| IT_WRITE(IT_CONFADDR, (bus->number << IT_BUSNUM_SHF) | |
| (devfn << IT_FUNCNUM_SHF) | (where & ~0x3)); |
| |
| if (access_type == PCI_ACCESS_WRITE) { |
| IT_WRITE(IT_CONFDATA, *data); |
| } else { |
| IT_READ(IT_CONFDATA, *data); |
| } |
| |
| /* |
| * Revisit: check for master or target abort. |
| */ |
| return 0; |
| } |
| |
| |
| /* |
| * We can't address 8 and 16 bit words directly. Instead we have to |
| * read/write a 32bit word and mask/modify the data we actually want. |
| */ |
| static write_config(struct pci_bus *bus, unsigned int devfn, int where, |
| int size, u32 val) |
| { |
| u32 data = 0; |
| |
| switch (size) { |
| case 1: |
| if (it8172_pcibios_config_access |
| (PCI_ACCESS_READ, dev, where, &data)) |
| return -1; |
| |
| *val = (data >> ((where & 3) << 3)) & 0xff; |
| |
| return PCIBIOS_SUCCESSFUL; |
| |
| case 2: |
| |
| if (where & 1) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| if (it8172_pcibios_config_access |
| (PCI_ACCESS_READ, dev, where, &data)) |
| return -1; |
| |
| *val = (data >> ((where & 3) << 3)) & 0xffff; |
| DBG("cfg read word: bus %d dev_fn %x where %x: val %x\n", |
| dev->bus->number, dev->devfn, where, *val); |
| |
| return PCIBIOS_SUCCESSFUL; |
| |
| case 4: |
| |
| if (where & 3) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| if (it8172_pcibios_config_access |
| (PCI_ACCESS_READ, dev, where, &data)) |
| return -1; |
| |
| *val = data; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| } |
| |
| |
| static write_config(struct pci_bus *bus, unsigned int devfn, int where, |
| int size, u32 val) |
| { |
| u32 data = 0; |
| |
| switch (size) { |
| case 1: |
| if (it8172_pcibios_config_access |
| (PCI_ACCESS_READ, dev, where, &data)) |
| return -1; |
| |
| data = (data & ~(0xff << ((where & 3) << 3))) | |
| (val << ((where & 3) << 3)); |
| |
| if (it8172_pcibios_config_access |
| (PCI_ACCESS_WRITE, dev, where, &data)) |
| return -1; |
| |
| return PCIBIOS_SUCCESSFUL; |
| |
| case 2: |
| if (where & 1) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| if (it8172_pcibios_config_access |
| (PCI_ACCESS_READ, dev, where, &data)) |
| eturn - 1; |
| |
| data = (data & ~(0xffff << ((where & 3) << 3))) | |
| (val << ((where & 3) << 3)); |
| |
| if (it8172_pcibios_config_access |
| (PCI_ACCESS_WRITE, dev, where, &data)) |
| return -1; |
| |
| return PCIBIOS_SUCCESSFUL; |
| |
| case 4: |
| if (where & 3) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| if (it8172_pcibios_config_access |
| (PCI_ACCESS_WRITE, dev, where, &val)) |
| return -1; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| } |
| |
| struct pci_ops it8172_pci_ops = { |
| .read = read_config, |
| .write = write_config, |
| }; |