blob: 16d953bda22cf13b50f2d43c42a8187d7d4e6e81 [file] [log] [blame]
/*
* arch/ppc/platforms/4xx/luan.c
*
* Luan board specific routines
*
* Matt Porter <mporter@kernel.crashing.org>
*
* Copyright 2004-2005 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/ocp.h>
#include <asm/pci-bridge.h>
#include <asm/time.h>
#include <asm/todc.h>
#include <asm/bootinfo.h>
#include <asm/ppc4xx_pic.h>
#include <asm/ppcboot.h>
#include <syslib/ibm44x_common.h>
#include <syslib/ibm440gx_common.h>
#include <syslib/ibm440sp_common.h>
bd_t __res;
static struct ibm44x_clocks clocks __initdata;
static void __init
luan_calibrate_decr(void)
{
unsigned int freq;
if (mfspr(SPRN_CCR1) & CCR1_TCS)
freq = LUAN_TMR_CLK;
else
freq = clocks.cpu;
ibm44x_calibrate_decr(freq);
}
static int
luan_show_cpuinfo(struct seq_file *m)
{
seq_printf(m, "vendor\t\t: IBM\n");
seq_printf(m, "machine\t\t: PPC440SP EVB (Luan)\n");
return 0;
}
static inline int
luan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
/* PCIX0 in adapter mode, no host interrupt routing */
/* PCIX1 */
if (hose->index == 0) {
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{ 49, 49, 49, 49 }, /* IDSEL 1 - PCIX1 Slot 0 */
{ 49, 49, 49, 49 }, /* IDSEL 2 - PCIX1 Slot 1 */
{ 49, 49, 49, 49 }, /* IDSEL 3 - PCIX1 Slot 2 */
{ 49, 49, 49, 49 }, /* IDSEL 4 - PCIX1 Slot 3 */
};
const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
/* PCIX2 */
} else if (hose->index == 1) {
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{ 50, 50, 50, 50 }, /* IDSEL 1 - PCIX2 Slot 0 */
{ 50, 50, 50, 50 }, /* IDSEL 2 - PCIX2 Slot 1 */
{ 50, 50, 50, 50 }, /* IDSEL 3 - PCIX2 Slot 2 */
{ 50, 50, 50, 50 }, /* IDSEL 4 - PCIX2 Slot 3 */
};
const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
return -1;
}
static void __init luan_set_emacdata(void)
{
struct ocp_def *def;
struct ocp_func_emac_data *emacdata;
/* Set phy_map, phy_mode, and mac_addr for the EMAC */
def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
emacdata = def->additions;
emacdata->phy_map = 0x00000001; /* Skip 0x00 */
emacdata->phy_mode = PHY_MODE_GMII;
memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
}
#define PCIX_READW(offset) \
(readw((void *)((u32)pcix_reg_base+offset)))
#define PCIX_WRITEW(value, offset) \
(writew(value, (void *)((u32)pcix_reg_base+offset)))
#define PCIX_WRITEL(value, offset) \
(writel(value, (void *)((u32)pcix_reg_base+offset)))
static void __init
luan_setup_pcix(void)
{
int i;
void *pcix_reg_base;
for (i=0;i<3;i++) {
pcix_reg_base = ioremap64(PCIX0_REG_BASE + i*PCIX_REG_OFFSET, PCIX_REG_SIZE);
/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
/* Disable all windows */
PCIX_WRITEL(0, PCIX0_POM0SA);
PCIX_WRITEL(0, PCIX0_POM1SA);
PCIX_WRITEL(0, PCIX0_POM2SA);
PCIX_WRITEL(0, PCIX0_PIM0SA);
PCIX_WRITEL(0, PCIX0_PIM0SAH);
PCIX_WRITEL(0, PCIX0_PIM1SA);
PCIX_WRITEL(0, PCIX0_PIM2SA);
PCIX_WRITEL(0, PCIX0_PIM2SAH);
/*
* Setup 512MB PLB->PCI outbound mem window
* (a_n000_0000->0_n000_0000)
* */
PCIX_WRITEL(0x0000000a, PCIX0_POM0LAH);
PCIX_WRITEL(0x80000000 | i*LUAN_PCIX_MEM_SIZE, PCIX0_POM0LAL);
PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
PCIX_WRITEL(0x80000000 | i*LUAN_PCIX_MEM_SIZE, PCIX0_POM0PCIAL);
PCIX_WRITEL(0xe0000001, PCIX0_POM0SA);
/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH);
iounmap(pcix_reg_base);
}
eieio();
}
static void __init
luan_setup_hose(struct pci_controller *hose,
int lower_mem,
int upper_mem,
int cfga,
int cfgd,
u64 pcix_io_base)
{
char name[20];
sprintf(name, "PCIX%d host bridge", hose->index);
hose->pci_mem_offset = LUAN_PCIX_MEM_OFFSET;
pci_init_resource(&hose->io_resource,
LUAN_PCIX_LOWER_IO,
LUAN_PCIX_UPPER_IO,
IORESOURCE_IO,
name);
pci_init_resource(&hose->mem_resources[0],
lower_mem,
upper_mem,
IORESOURCE_MEM,
name);
hose->io_space.start = LUAN_PCIX_LOWER_IO;
hose->io_space.end = LUAN_PCIX_UPPER_IO;
hose->mem_space.start = lower_mem;
hose->mem_space.end = upper_mem;
hose->io_base_virt = ioremap64(pcix_io_base, PCIX_IO_SIZE);
isa_io_base = (unsigned long) hose->io_base_virt;
setup_indirect_pci(hose, cfga, cfgd);
hose->set_cfg_type = 1;
}
static void __init
luan_setup_hoses(void)
{
struct pci_controller *hose1, *hose2;
/* Configure windows on the PCI-X host bridge */
luan_setup_pcix();
/* Allocate hoses for PCIX1 and PCIX2 */
hose1 = pcibios_alloc_controller();
hose2 = pcibios_alloc_controller();
if (!hose1 || !hose2)
return;
/* Setup PCIX1 */
hose1->first_busno = 0;
hose1->last_busno = 0xff;
luan_setup_hose(hose1,
LUAN_PCIX1_LOWER_MEM,
LUAN_PCIX1_UPPER_MEM,
PCIX1_CFGA,
PCIX1_CFGD,
PCIX1_IO_BASE);
hose1->last_busno = pciauto_bus_scan(hose1, hose1->first_busno);
/* Setup PCIX2 */
hose2->first_busno = hose1->last_busno + 1;
hose2->last_busno = 0xff;
luan_setup_hose(hose2,
LUAN_PCIX2_LOWER_MEM,
LUAN_PCIX2_UPPER_MEM,
PCIX2_CFGA,
PCIX2_CFGD,
PCIX2_IO_BASE);
hose2->last_busno = pciauto_bus_scan(hose2, hose2->first_busno);
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_map_irq = luan_map_irq;
}
TODC_ALLOC();
static void __init
luan_early_serial_map(void)
{
struct uart_port port;
/* Setup ioremapped serial port access */
memset(&port, 0, sizeof(port));
port.membase = ioremap64(PPC440SP_UART0_ADDR, 8);
port.irq = UART0_INT;
port.uartclk = clocks.uart0;
port.regshift = 0;
port.iotype = SERIAL_IO_MEM;
port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
port.line = 0;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 0 failed\n");
}
port.membase = ioremap64(PPC440SP_UART1_ADDR, 8);
port.irq = UART1_INT;
port.uartclk = clocks.uart1;
port.line = 1;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 1 failed\n");
}
port.membase = ioremap64(PPC440SP_UART2_ADDR, 8);
port.irq = UART2_INT;
port.uartclk = BASE_BAUD;
port.line = 2;
if (early_serial_setup(&port) != 0) {
printk("Early serial init of port 2 failed\n");
}
}
static void __init
luan_setup_arch(void)
{
luan_set_emacdata();
#if !defined(CONFIG_BDI_SWITCH)
/*
* The Abatron BDI JTAG debugger does not tolerate others
* mucking with the debug registers.
*/
mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
#endif
/*
* Determine various clocks.
* To be completely correct we should get SysClk
* from FPGA, because it can be changed by on-board switches
* --ebs
*/
/* 440GX and 440SP clocking is the same -mdp */
ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
ocp_sys_info.opb_bus_freq = clocks.opb;
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000/HZ;
/* Setup PCIXn host bridges */
luan_setup_hoses();
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
luan_early_serial_map();
/* Identify the system */
printk("Luan port (MontaVista Software, Inc. <source@mvista.com>)\n");
}
void __init platform_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7)
{
parse_bootinfo(find_bootinfo());
/*
* If we were passed in a board information, copy it into the
* residual data area.
*/
if (r3)
__res = *(bd_t *)(r3 + KERNELBASE);
ibm44x_platform_init();
ppc_md.setup_arch = luan_setup_arch;
ppc_md.show_cpuinfo = luan_show_cpuinfo;
ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
ppc_md.calibrate_decr = luan_calibrate_decr;
#ifdef CONFIG_KGDB
ppc_md.early_serial_map = luan_early_serial_map;
#endif
}