| // SPDX-License-Identifier: GPL-2.0-only | |
| /* Copyright (c) 2010,2015,2019 The Linux Foundation. All rights reserved. | |
| * Copyright (C) 2015 Linaro Ltd. | |
| */ | |
| #include <linux/arm-smccc.h> | |
| #include <linux/bitfield.h> | |
| #include <linux/bits.h> | |
| #include <linux/cleanup.h> | |
| #include <linux/clk.h> | |
| #include <linux/completion.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/err.h> | |
| #include <linux/export.h> | |
| #include <linux/firmware/qcom/qcom_scm.h> | |
| #include <linux/firmware/qcom/qcom_tzmem.h> | |
| #include <linux/init.h> | |
| #include <linux/interconnect.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kstrtox.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/of_reserved_mem.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/reset-controller.h> | |
| #include <linux/sizes.h> | |
| #include <linux/types.h> | |
| #include "qcom_scm.h" | |
| #include "qcom_tzmem.h" | |
| static u32 download_mode; | |
| struct qcom_scm { | |
| struct device *dev; | |
| struct clk *core_clk; | |
| struct clk *iface_clk; | |
| struct clk *bus_clk; | |
| struct icc_path *path; | |
| struct completion waitq_comp; | |
| struct reset_controller_dev reset; | |
| /* control access to the interconnect path */ | |
| struct mutex scm_bw_lock; | |
| int scm_vote_count; | |
| u64 dload_mode_addr; | |
| struct qcom_tzmem_pool *mempool; | |
| }; | |
| struct qcom_scm_current_perm_info { | |
| __le32 vmid; | |
| __le32 perm; | |
| __le64 ctx; | |
| __le32 ctx_size; | |
| __le32 unused; | |
| }; | |
| struct qcom_scm_mem_map_info { | |
| __le64 mem_addr; | |
| __le64 mem_size; | |
| }; | |
| /** | |
| * struct qcom_scm_qseecom_resp - QSEECOM SCM call response. | |
| * @result: Result or status of the SCM call. See &enum qcom_scm_qseecom_result. | |
| * @resp_type: Type of the response. See &enum qcom_scm_qseecom_resp_type. | |
| * @data: Response data. The type of this data is given in @resp_type. | |
| */ | |
| struct qcom_scm_qseecom_resp { | |
| u64 result; | |
| u64 resp_type; | |
| u64 data; | |
| }; | |
| enum qcom_scm_qseecom_result { | |
| QSEECOM_RESULT_SUCCESS = 0, | |
| QSEECOM_RESULT_INCOMPLETE = 1, | |
| QSEECOM_RESULT_BLOCKED_ON_LISTENER = 2, | |
| QSEECOM_RESULT_FAILURE = 0xFFFFFFFF, | |
| }; | |
| enum qcom_scm_qseecom_resp_type { | |
| QSEECOM_SCM_RES_APP_ID = 0xEE01, | |
| QSEECOM_SCM_RES_QSEOS_LISTENER_ID = 0xEE02, | |
| }; | |
| enum qcom_scm_qseecom_tz_owner { | |
| QSEECOM_TZ_OWNER_SIP = 2, | |
| QSEECOM_TZ_OWNER_TZ_APPS = 48, | |
| QSEECOM_TZ_OWNER_QSEE_OS = 50 | |
| }; | |
| enum qcom_scm_qseecom_tz_svc { | |
| QSEECOM_TZ_SVC_APP_ID_PLACEHOLDER = 0, | |
| QSEECOM_TZ_SVC_APP_MGR = 1, | |
| QSEECOM_TZ_SVC_INFO = 6, | |
| }; | |
| enum qcom_scm_qseecom_tz_cmd_app { | |
| QSEECOM_TZ_CMD_APP_SEND = 1, | |
| QSEECOM_TZ_CMD_APP_LOOKUP = 3, | |
| }; | |
| enum qcom_scm_qseecom_tz_cmd_info { | |
| QSEECOM_TZ_CMD_INFO_VERSION = 3, | |
| }; | |
| #define QSEECOM_MAX_APP_NAME_SIZE 64 | |
| /* Each bit configures cold/warm boot address for one of the 4 CPUs */ | |
| static const u8 qcom_scm_cpu_cold_bits[QCOM_SCM_BOOT_MAX_CPUS] = { | |
| 0, BIT(0), BIT(3), BIT(5) | |
| }; | |
| static const u8 qcom_scm_cpu_warm_bits[QCOM_SCM_BOOT_MAX_CPUS] = { | |
| BIT(2), BIT(1), BIT(4), BIT(6) | |
| }; | |
| #define QCOM_SMC_WAITQ_FLAG_WAKE_ONE BIT(0) | |
| #define QCOM_DLOAD_MASK GENMASK(5, 4) | |
| #define QCOM_DLOAD_NODUMP 0 | |
| #define QCOM_DLOAD_FULLDUMP 1 | |
| #define QCOM_DLOAD_MINIDUMP 2 | |
| #define QCOM_DLOAD_BOTHDUMP 3 | |
| static const char * const qcom_scm_convention_names[] = { | |
| [SMC_CONVENTION_UNKNOWN] = "unknown", | |
| [SMC_CONVENTION_ARM_32] = "smc arm 32", | |
| [SMC_CONVENTION_ARM_64] = "smc arm 64", | |
| [SMC_CONVENTION_LEGACY] = "smc legacy", | |
| }; | |
| static const char * const download_mode_name[] = { | |
| [QCOM_DLOAD_NODUMP] = "off", | |
| [QCOM_DLOAD_FULLDUMP] = "full", | |
| [QCOM_DLOAD_MINIDUMP] = "mini", | |
| [QCOM_DLOAD_BOTHDUMP] = "full,mini", | |
| }; | |
| static struct qcom_scm *__scm; | |
| static int qcom_scm_clk_enable(void) | |
| { | |
| int ret; | |
| ret = clk_prepare_enable(__scm->core_clk); | |
| if (ret) | |
| goto bail; | |
| ret = clk_prepare_enable(__scm->iface_clk); | |
| if (ret) | |
| goto disable_core; | |
| ret = clk_prepare_enable(__scm->bus_clk); | |
| if (ret) | |
| goto disable_iface; | |
| return 0; | |
| disable_iface: | |
| clk_disable_unprepare(__scm->iface_clk); | |
| disable_core: | |
| clk_disable_unprepare(__scm->core_clk); | |
| bail: | |
| return ret; | |
| } | |
| static void qcom_scm_clk_disable(void) | |
| { | |
| clk_disable_unprepare(__scm->core_clk); | |
| clk_disable_unprepare(__scm->iface_clk); | |
| clk_disable_unprepare(__scm->bus_clk); | |
| } | |
| static int qcom_scm_bw_enable(void) | |
| { | |
| int ret = 0; | |
| if (!__scm->path) | |
| return 0; | |
| mutex_lock(&__scm->scm_bw_lock); | |
| if (!__scm->scm_vote_count) { | |
| ret = icc_set_bw(__scm->path, 0, UINT_MAX); | |
| if (ret < 0) { | |
| dev_err(__scm->dev, "failed to set bandwidth request\n"); | |
| goto err_bw; | |
| } | |
| } | |
| __scm->scm_vote_count++; | |
| err_bw: | |
| mutex_unlock(&__scm->scm_bw_lock); | |
| return ret; | |
| } | |
| static void qcom_scm_bw_disable(void) | |
| { | |
| if (!__scm->path) | |
| return; | |
| mutex_lock(&__scm->scm_bw_lock); | |
| if (__scm->scm_vote_count-- == 1) | |
| icc_set_bw(__scm->path, 0, 0); | |
| mutex_unlock(&__scm->scm_bw_lock); | |
| } | |
| enum qcom_scm_convention qcom_scm_convention = SMC_CONVENTION_UNKNOWN; | |
| static DEFINE_SPINLOCK(scm_query_lock); | |
| struct qcom_tzmem_pool *qcom_scm_get_tzmem_pool(void) | |
| { | |
| return __scm->mempool; | |
| } | |
| static enum qcom_scm_convention __get_convention(void) | |
| { | |
| unsigned long flags; | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_INFO, | |
| .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL, | |
| .args[0] = SCM_SMC_FNID(QCOM_SCM_SVC_INFO, | |
| QCOM_SCM_INFO_IS_CALL_AVAIL) | | |
| (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT), | |
| .arginfo = QCOM_SCM_ARGS(1), | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| enum qcom_scm_convention probed_convention; | |
| int ret; | |
| bool forced = false; | |
| if (likely(qcom_scm_convention != SMC_CONVENTION_UNKNOWN)) | |
| return qcom_scm_convention; | |
| /* | |
| * Per the "SMC calling convention specification", the 64-bit calling | |
| * convention can only be used when the client is 64-bit, otherwise | |
| * system will encounter the undefined behaviour. | |
| */ | |
| #if IS_ENABLED(CONFIG_ARM64) | |
| /* | |
| * Device isn't required as there is only one argument - no device | |
| * needed to dma_map_single to secure world | |
| */ | |
| probed_convention = SMC_CONVENTION_ARM_64; | |
| ret = __scm_smc_call(NULL, &desc, probed_convention, &res, true); | |
| if (!ret && res.result[0] == 1) | |
| goto found; | |
| /* | |
| * Some SC7180 firmwares didn't implement the | |
| * QCOM_SCM_INFO_IS_CALL_AVAIL call, so we fallback to forcing ARM_64 | |
| * calling conventions on these firmwares. Luckily we don't make any | |
| * early calls into the firmware on these SoCs so the device pointer | |
| * will be valid here to check if the compatible matches. | |
| */ | |
| if (of_device_is_compatible(__scm ? __scm->dev->of_node : NULL, "qcom,scm-sc7180")) { | |
| forced = true; | |
| goto found; | |
| } | |
| #endif | |
| probed_convention = SMC_CONVENTION_ARM_32; | |
| ret = __scm_smc_call(NULL, &desc, probed_convention, &res, true); | |
| if (!ret && res.result[0] == 1) | |
| goto found; | |
| probed_convention = SMC_CONVENTION_LEGACY; | |
| found: | |
| spin_lock_irqsave(&scm_query_lock, flags); | |
| if (probed_convention != qcom_scm_convention) { | |
| qcom_scm_convention = probed_convention; | |
| pr_info("qcom_scm: convention: %s%s\n", | |
| qcom_scm_convention_names[qcom_scm_convention], | |
| forced ? " (forced)" : ""); | |
| } | |
| spin_unlock_irqrestore(&scm_query_lock, flags); | |
| return qcom_scm_convention; | |
| } | |
| /** | |
| * qcom_scm_call() - Invoke a syscall in the secure world | |
| * @dev: device | |
| * @desc: Descriptor structure containing arguments and return values | |
| * @res: Structure containing results from SMC/HVC call | |
| * | |
| * Sends a command to the SCM and waits for the command to finish processing. | |
| * This should *only* be called in pre-emptible context. | |
| */ | |
| static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc, | |
| struct qcom_scm_res *res) | |
| { | |
| might_sleep(); | |
| switch (__get_convention()) { | |
| case SMC_CONVENTION_ARM_32: | |
| case SMC_CONVENTION_ARM_64: | |
| return scm_smc_call(dev, desc, res, false); | |
| case SMC_CONVENTION_LEGACY: | |
| return scm_legacy_call(dev, desc, res); | |
| default: | |
| pr_err("Unknown current SCM calling convention.\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| /** | |
| * qcom_scm_call_atomic() - atomic variation of qcom_scm_call() | |
| * @dev: device | |
| * @desc: Descriptor structure containing arguments and return values | |
| * @res: Structure containing results from SMC/HVC call | |
| * | |
| * Sends a command to the SCM and waits for the command to finish processing. | |
| * This can be called in atomic context. | |
| */ | |
| static int qcom_scm_call_atomic(struct device *dev, | |
| const struct qcom_scm_desc *desc, | |
| struct qcom_scm_res *res) | |
| { | |
| switch (__get_convention()) { | |
| case SMC_CONVENTION_ARM_32: | |
| case SMC_CONVENTION_ARM_64: | |
| return scm_smc_call(dev, desc, res, true); | |
| case SMC_CONVENTION_LEGACY: | |
| return scm_legacy_call_atomic(dev, desc, res); | |
| default: | |
| pr_err("Unknown current SCM calling convention.\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| static bool __qcom_scm_is_call_available(struct device *dev, u32 svc_id, | |
| u32 cmd_id) | |
| { | |
| int ret; | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_INFO, | |
| .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| desc.arginfo = QCOM_SCM_ARGS(1); | |
| switch (__get_convention()) { | |
| case SMC_CONVENTION_ARM_32: | |
| case SMC_CONVENTION_ARM_64: | |
| desc.args[0] = SCM_SMC_FNID(svc_id, cmd_id) | | |
| (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT); | |
| break; | |
| case SMC_CONVENTION_LEGACY: | |
| desc.args[0] = SCM_LEGACY_FNID(svc_id, cmd_id); | |
| break; | |
| default: | |
| pr_err("Unknown SMC convention being used\n"); | |
| return false; | |
| } | |
| ret = qcom_scm_call(dev, &desc, &res); | |
| return ret ? false : !!res.result[0]; | |
| } | |
| static int qcom_scm_set_boot_addr(void *entry, const u8 *cpu_bits) | |
| { | |
| int cpu; | |
| unsigned int flags = 0; | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_BOOT, | |
| .cmd = QCOM_SCM_BOOT_SET_ADDR, | |
| .arginfo = QCOM_SCM_ARGS(2), | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| for_each_present_cpu(cpu) { | |
| if (cpu >= QCOM_SCM_BOOT_MAX_CPUS) | |
| return -EINVAL; | |
| flags |= cpu_bits[cpu]; | |
| } | |
| desc.args[0] = flags; | |
| desc.args[1] = virt_to_phys(entry); | |
| return qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL); | |
| } | |
| static int qcom_scm_set_boot_addr_mc(void *entry, unsigned int flags) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_BOOT, | |
| .cmd = QCOM_SCM_BOOT_SET_ADDR_MC, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| .arginfo = QCOM_SCM_ARGS(6), | |
| .args = { | |
| virt_to_phys(entry), | |
| /* Apply to all CPUs in all affinity levels */ | |
| ~0ULL, ~0ULL, ~0ULL, ~0ULL, | |
| flags, | |
| }, | |
| }; | |
| /* Need a device for DMA of the additional arguments */ | |
| if (!__scm || __get_convention() == SMC_CONVENTION_LEGACY) | |
| return -EOPNOTSUPP; | |
| return qcom_scm_call(__scm->dev, &desc, NULL); | |
| } | |
| /** | |
| * qcom_scm_set_warm_boot_addr() - Set the warm boot address for all cpus | |
| * @entry: Entry point function for the cpus | |
| * | |
| * Set the Linux entry point for the SCM to transfer control to when coming | |
| * out of a power down. CPU power down may be executed on cpuidle or hotplug. | |
| */ | |
| int qcom_scm_set_warm_boot_addr(void *entry) | |
| { | |
| if (qcom_scm_set_boot_addr_mc(entry, QCOM_SCM_BOOT_MC_FLAG_WARMBOOT)) | |
| /* Fallback to old SCM call */ | |
| return qcom_scm_set_boot_addr(entry, qcom_scm_cpu_warm_bits); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_set_warm_boot_addr); | |
| /** | |
| * qcom_scm_set_cold_boot_addr() - Set the cold boot address for all cpus | |
| * @entry: Entry point function for the cpus | |
| */ | |
| int qcom_scm_set_cold_boot_addr(void *entry) | |
| { | |
| if (qcom_scm_set_boot_addr_mc(entry, QCOM_SCM_BOOT_MC_FLAG_COLDBOOT)) | |
| /* Fallback to old SCM call */ | |
| return qcom_scm_set_boot_addr(entry, qcom_scm_cpu_cold_bits); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_set_cold_boot_addr); | |
| /** | |
| * qcom_scm_cpu_power_down() - Power down the cpu | |
| * @flags: Flags to flush cache | |
| * | |
| * This is an end point to power down cpu. If there was a pending interrupt, | |
| * the control would return from this function, otherwise, the cpu jumps to the | |
| * warm boot entry point set for this cpu upon reset. | |
| */ | |
| void qcom_scm_cpu_power_down(u32 flags) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_BOOT, | |
| .cmd = QCOM_SCM_BOOT_TERMINATE_PC, | |
| .args[0] = flags & QCOM_SCM_FLUSH_FLAG_MASK, | |
| .arginfo = QCOM_SCM_ARGS(1), | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_cpu_power_down); | |
| int qcom_scm_set_remote_state(u32 state, u32 id) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_BOOT, | |
| .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE, | |
| .arginfo = QCOM_SCM_ARGS(2), | |
| .args[0] = state, | |
| .args[1] = id, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| int ret; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| return ret ? : res.result[0]; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_set_remote_state); | |
| static int qcom_scm_disable_sdi(void) | |
| { | |
| int ret; | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_BOOT, | |
| .cmd = QCOM_SCM_BOOT_SDI_CONFIG, | |
| .args[0] = 1, /* Disable watchdog debug */ | |
| .args[1] = 0, /* Disable SDI */ | |
| .arginfo = QCOM_SCM_ARGS(2), | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| ret = qcom_scm_clk_enable(); | |
| if (ret) | |
| return ret; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| qcom_scm_clk_disable(); | |
| return ret ? : res.result[0]; | |
| } | |
| static int __qcom_scm_set_dload_mode(struct device *dev, bool enable) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_BOOT, | |
| .cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE, | |
| .arginfo = QCOM_SCM_ARGS(2), | |
| .args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0; | |
| return qcom_scm_call_atomic(__scm->dev, &desc, NULL); | |
| } | |
| static int qcom_scm_io_rmw(phys_addr_t addr, unsigned int mask, unsigned int val) | |
| { | |
| unsigned int old; | |
| unsigned int new; | |
| int ret; | |
| ret = qcom_scm_io_readl(addr, &old); | |
| if (ret) | |
| return ret; | |
| new = (old & ~mask) | (val & mask); | |
| return qcom_scm_io_writel(addr, new); | |
| } | |
| static void qcom_scm_set_download_mode(u32 dload_mode) | |
| { | |
| int ret = 0; | |
| if (__scm->dload_mode_addr) { | |
| ret = qcom_scm_io_rmw(__scm->dload_mode_addr, QCOM_DLOAD_MASK, | |
| FIELD_PREP(QCOM_DLOAD_MASK, dload_mode)); | |
| } else if (__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_BOOT, | |
| QCOM_SCM_BOOT_SET_DLOAD_MODE)) { | |
| ret = __qcom_scm_set_dload_mode(__scm->dev, !!dload_mode); | |
| } else { | |
| dev_err(__scm->dev, | |
| "No available mechanism for setting download mode\n"); | |
| } | |
| if (ret) | |
| dev_err(__scm->dev, "failed to set download mode: %d\n", ret); | |
| } | |
| /** | |
| * qcom_scm_pas_init_image() - Initialize peripheral authentication service | |
| * state machine for a given peripheral, using the | |
| * metadata | |
| * @peripheral: peripheral id | |
| * @metadata: pointer to memory containing ELF header, program header table | |
| * and optional blob of data used for authenticating the metadata | |
| * and the rest of the firmware | |
| * @size: size of the metadata | |
| * @ctx: optional metadata context | |
| * | |
| * Return: 0 on success. | |
| * | |
| * Upon successful return, the PAS metadata context (@ctx) will be used to | |
| * track the metadata allocation, this needs to be released by invoking | |
| * qcom_scm_pas_metadata_release() by the caller. | |
| */ | |
| int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size, | |
| struct qcom_scm_pas_metadata *ctx) | |
| { | |
| dma_addr_t mdata_phys; | |
| void *mdata_buf; | |
| int ret; | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_PIL, | |
| .cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE, | |
| .arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW), | |
| .args[0] = peripheral, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| /* | |
| * During the scm call memory protection will be enabled for the meta | |
| * data blob, so make sure it's physically contiguous, 4K aligned and | |
| * non-cachable to avoid XPU violations. | |
| * | |
| * For PIL calls the hypervisor creates SHM Bridges for the blob | |
| * buffers on behalf of Linux so we must not do it ourselves hence | |
| * not using the TZMem allocator here. | |
| * | |
| * If we pass a buffer that is already part of an SHM Bridge to this | |
| * call, it will fail. | |
| */ | |
| mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys, | |
| GFP_KERNEL); | |
| if (!mdata_buf) | |
| return -ENOMEM; | |
| memcpy(mdata_buf, metadata, size); | |
| ret = qcom_scm_clk_enable(); | |
| if (ret) | |
| goto out; | |
| ret = qcom_scm_bw_enable(); | |
| if (ret) | |
| goto disable_clk; | |
| desc.args[1] = mdata_phys; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| qcom_scm_bw_disable(); | |
| disable_clk: | |
| qcom_scm_clk_disable(); | |
| out: | |
| if (ret < 0 || !ctx) { | |
| dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys); | |
| } else if (ctx) { | |
| ctx->ptr = mdata_buf; | |
| ctx->phys = mdata_phys; | |
| ctx->size = size; | |
| } | |
| return ret ? : res.result[0]; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_pas_init_image); | |
| /** | |
| * qcom_scm_pas_metadata_release() - release metadata context | |
| * @ctx: metadata context | |
| */ | |
| void qcom_scm_pas_metadata_release(struct qcom_scm_pas_metadata *ctx) | |
| { | |
| if (!ctx->ptr) | |
| return; | |
| dma_free_coherent(__scm->dev, ctx->size, ctx->ptr, ctx->phys); | |
| ctx->ptr = NULL; | |
| ctx->phys = 0; | |
| ctx->size = 0; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_pas_metadata_release); | |
| /** | |
| * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral | |
| * for firmware loading | |
| * @peripheral: peripheral id | |
| * @addr: start address of memory area to prepare | |
| * @size: size of the memory area to prepare | |
| * | |
| * Returns 0 on success. | |
| */ | |
| int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size) | |
| { | |
| int ret; | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_PIL, | |
| .cmd = QCOM_SCM_PIL_PAS_MEM_SETUP, | |
| .arginfo = QCOM_SCM_ARGS(3), | |
| .args[0] = peripheral, | |
| .args[1] = addr, | |
| .args[2] = size, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| ret = qcom_scm_clk_enable(); | |
| if (ret) | |
| return ret; | |
| ret = qcom_scm_bw_enable(); | |
| if (ret) | |
| goto disable_clk; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| qcom_scm_bw_disable(); | |
| disable_clk: | |
| qcom_scm_clk_disable(); | |
| return ret ? : res.result[0]; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_pas_mem_setup); | |
| /** | |
| * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware | |
| * and reset the remote processor | |
| * @peripheral: peripheral id | |
| * | |
| * Return 0 on success. | |
| */ | |
| int qcom_scm_pas_auth_and_reset(u32 peripheral) | |
| { | |
| int ret; | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_PIL, | |
| .cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET, | |
| .arginfo = QCOM_SCM_ARGS(1), | |
| .args[0] = peripheral, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| ret = qcom_scm_clk_enable(); | |
| if (ret) | |
| return ret; | |
| ret = qcom_scm_bw_enable(); | |
| if (ret) | |
| goto disable_clk; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| qcom_scm_bw_disable(); | |
| disable_clk: | |
| qcom_scm_clk_disable(); | |
| return ret ? : res.result[0]; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_pas_auth_and_reset); | |
| /** | |
| * qcom_scm_pas_shutdown() - Shut down the remote processor | |
| * @peripheral: peripheral id | |
| * | |
| * Returns 0 on success. | |
| */ | |
| int qcom_scm_pas_shutdown(u32 peripheral) | |
| { | |
| int ret; | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_PIL, | |
| .cmd = QCOM_SCM_PIL_PAS_SHUTDOWN, | |
| .arginfo = QCOM_SCM_ARGS(1), | |
| .args[0] = peripheral, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| ret = qcom_scm_clk_enable(); | |
| if (ret) | |
| return ret; | |
| ret = qcom_scm_bw_enable(); | |
| if (ret) | |
| goto disable_clk; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| qcom_scm_bw_disable(); | |
| disable_clk: | |
| qcom_scm_clk_disable(); | |
| return ret ? : res.result[0]; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_pas_shutdown); | |
| /** | |
| * qcom_scm_pas_supported() - Check if the peripheral authentication service is | |
| * available for the given peripherial | |
| * @peripheral: peripheral id | |
| * | |
| * Returns true if PAS is supported for this peripheral, otherwise false. | |
| */ | |
| bool qcom_scm_pas_supported(u32 peripheral) | |
| { | |
| int ret; | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_PIL, | |
| .cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED, | |
| .arginfo = QCOM_SCM_ARGS(1), | |
| .args[0] = peripheral, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL, | |
| QCOM_SCM_PIL_PAS_IS_SUPPORTED)) | |
| return false; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| return ret ? false : !!res.result[0]; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_pas_supported); | |
| static int __qcom_scm_pas_mss_reset(struct device *dev, bool reset) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_PIL, | |
| .cmd = QCOM_SCM_PIL_PAS_MSS_RESET, | |
| .arginfo = QCOM_SCM_ARGS(2), | |
| .args[0] = reset, | |
| .args[1] = 0, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| int ret; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| return ret ? : res.result[0]; | |
| } | |
| static int qcom_scm_pas_reset_assert(struct reset_controller_dev *rcdev, | |
| unsigned long idx) | |
| { | |
| if (idx != 0) | |
| return -EINVAL; | |
| return __qcom_scm_pas_mss_reset(__scm->dev, 1); | |
| } | |
| static int qcom_scm_pas_reset_deassert(struct reset_controller_dev *rcdev, | |
| unsigned long idx) | |
| { | |
| if (idx != 0) | |
| return -EINVAL; | |
| return __qcom_scm_pas_mss_reset(__scm->dev, 0); | |
| } | |
| static const struct reset_control_ops qcom_scm_pas_reset_ops = { | |
| .assert = qcom_scm_pas_reset_assert, | |
| .deassert = qcom_scm_pas_reset_deassert, | |
| }; | |
| int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_IO, | |
| .cmd = QCOM_SCM_IO_READ, | |
| .arginfo = QCOM_SCM_ARGS(1), | |
| .args[0] = addr, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| int ret; | |
| ret = qcom_scm_call_atomic(__scm->dev, &desc, &res); | |
| if (ret >= 0) | |
| *val = res.result[0]; | |
| return ret < 0 ? ret : 0; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_io_readl); | |
| int qcom_scm_io_writel(phys_addr_t addr, unsigned int val) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_IO, | |
| .cmd = QCOM_SCM_IO_WRITE, | |
| .arginfo = QCOM_SCM_ARGS(2), | |
| .args[0] = addr, | |
| .args[1] = val, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| return qcom_scm_call_atomic(__scm->dev, &desc, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_io_writel); | |
| /** | |
| * qcom_scm_restore_sec_cfg_available() - Check if secure environment | |
| * supports restore security config interface. | |
| * | |
| * Return true if restore-cfg interface is supported, false if not. | |
| */ | |
| bool qcom_scm_restore_sec_cfg_available(void) | |
| { | |
| return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_MP, | |
| QCOM_SCM_MP_RESTORE_SEC_CFG); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_restore_sec_cfg_available); | |
| int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_MP, | |
| .cmd = QCOM_SCM_MP_RESTORE_SEC_CFG, | |
| .arginfo = QCOM_SCM_ARGS(2), | |
| .args[0] = device_id, | |
| .args[1] = spare, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| int ret; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| return ret ? : res.result[0]; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_restore_sec_cfg); | |
| int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_MP, | |
| .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE, | |
| .arginfo = QCOM_SCM_ARGS(1), | |
| .args[0] = spare, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| int ret; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| if (size) | |
| *size = res.result[0]; | |
| return ret ? : res.result[1]; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_iommu_secure_ptbl_size); | |
| int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_MP, | |
| .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT, | |
| .arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL, | |
| QCOM_SCM_VAL), | |
| .args[0] = addr, | |
| .args[1] = size, | |
| .args[2] = spare, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| int ret; | |
| ret = qcom_scm_call(__scm->dev, &desc, NULL); | |
| /* the pg table has been initialized already, ignore the error */ | |
| if (ret == -EPERM) | |
| ret = 0; | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_iommu_secure_ptbl_init); | |
| int qcom_scm_iommu_set_cp_pool_size(u32 spare, u32 size) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_MP, | |
| .cmd = QCOM_SCM_MP_IOMMU_SET_CP_POOL_SIZE, | |
| .arginfo = QCOM_SCM_ARGS(2), | |
| .args[0] = size, | |
| .args[1] = spare, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| return qcom_scm_call(__scm->dev, &desc, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_iommu_set_cp_pool_size); | |
| int qcom_scm_mem_protect_video_var(u32 cp_start, u32 cp_size, | |
| u32 cp_nonpixel_start, | |
| u32 cp_nonpixel_size) | |
| { | |
| int ret; | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_MP, | |
| .cmd = QCOM_SCM_MP_VIDEO_VAR, | |
| .arginfo = QCOM_SCM_ARGS(4, QCOM_SCM_VAL, QCOM_SCM_VAL, | |
| QCOM_SCM_VAL, QCOM_SCM_VAL), | |
| .args[0] = cp_start, | |
| .args[1] = cp_size, | |
| .args[2] = cp_nonpixel_start, | |
| .args[3] = cp_nonpixel_size, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| return ret ? : res.result[0]; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_mem_protect_video_var); | |
| static int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region, | |
| size_t mem_sz, phys_addr_t src, size_t src_sz, | |
| phys_addr_t dest, size_t dest_sz) | |
| { | |
| int ret; | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_MP, | |
| .cmd = QCOM_SCM_MP_ASSIGN, | |
| .arginfo = QCOM_SCM_ARGS(7, QCOM_SCM_RO, QCOM_SCM_VAL, | |
| QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_RO, | |
| QCOM_SCM_VAL, QCOM_SCM_VAL), | |
| .args[0] = mem_region, | |
| .args[1] = mem_sz, | |
| .args[2] = src, | |
| .args[3] = src_sz, | |
| .args[4] = dest, | |
| .args[5] = dest_sz, | |
| .args[6] = 0, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| ret = qcom_scm_call(dev, &desc, &res); | |
| return ret ? : res.result[0]; | |
| } | |
| /** | |
| * qcom_scm_assign_mem() - Make a secure call to reassign memory ownership | |
| * @mem_addr: mem region whose ownership need to be reassigned | |
| * @mem_sz: size of the region. | |
| * @srcvm: vmid for current set of owners, each set bit in | |
| * flag indicate a unique owner | |
| * @newvm: array having new owners and corresponding permission | |
| * flags | |
| * @dest_cnt: number of owners in next set. | |
| * | |
| * Return negative errno on failure or 0 on success with @srcvm updated. | |
| */ | |
| int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz, | |
| u64 *srcvm, | |
| const struct qcom_scm_vmperm *newvm, | |
| unsigned int dest_cnt) | |
| { | |
| struct qcom_scm_current_perm_info *destvm; | |
| struct qcom_scm_mem_map_info *mem_to_map; | |
| phys_addr_t mem_to_map_phys; | |
| phys_addr_t dest_phys; | |
| phys_addr_t ptr_phys; | |
| size_t mem_to_map_sz; | |
| size_t dest_sz; | |
| size_t src_sz; | |
| size_t ptr_sz; | |
| int next_vm; | |
| __le32 *src; | |
| int ret, i, b; | |
| u64 srcvm_bits = *srcvm; | |
| src_sz = hweight64(srcvm_bits) * sizeof(*src); | |
| mem_to_map_sz = sizeof(*mem_to_map); | |
| dest_sz = dest_cnt * sizeof(*destvm); | |
| ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) + | |
| ALIGN(dest_sz, SZ_64); | |
| void *ptr __free(qcom_tzmem) = qcom_tzmem_alloc(__scm->mempool, | |
| ptr_sz, GFP_KERNEL); | |
| if (!ptr) | |
| return -ENOMEM; | |
| ptr_phys = qcom_tzmem_to_phys(ptr); | |
| /* Fill source vmid detail */ | |
| src = ptr; | |
| i = 0; | |
| for (b = 0; b < BITS_PER_TYPE(u64); b++) { | |
| if (srcvm_bits & BIT(b)) | |
| src[i++] = cpu_to_le32(b); | |
| } | |
| /* Fill details of mem buff to map */ | |
| mem_to_map = ptr + ALIGN(src_sz, SZ_64); | |
| mem_to_map_phys = ptr_phys + ALIGN(src_sz, SZ_64); | |
| mem_to_map->mem_addr = cpu_to_le64(mem_addr); | |
| mem_to_map->mem_size = cpu_to_le64(mem_sz); | |
| next_vm = 0; | |
| /* Fill details of next vmid detail */ | |
| destvm = ptr + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64); | |
| dest_phys = ptr_phys + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64); | |
| for (i = 0; i < dest_cnt; i++, destvm++, newvm++) { | |
| destvm->vmid = cpu_to_le32(newvm->vmid); | |
| destvm->perm = cpu_to_le32(newvm->perm); | |
| destvm->ctx = 0; | |
| destvm->ctx_size = 0; | |
| next_vm |= BIT(newvm->vmid); | |
| } | |
| ret = __qcom_scm_assign_mem(__scm->dev, mem_to_map_phys, mem_to_map_sz, | |
| ptr_phys, src_sz, dest_phys, dest_sz); | |
| if (ret) { | |
| dev_err(__scm->dev, | |
| "Assign memory protection call failed %d\n", ret); | |
| return -EINVAL; | |
| } | |
| *srcvm = next_vm; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_assign_mem); | |
| /** | |
| * qcom_scm_ocmem_lock_available() - is OCMEM lock/unlock interface available | |
| */ | |
| bool qcom_scm_ocmem_lock_available(void) | |
| { | |
| return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_OCMEM, | |
| QCOM_SCM_OCMEM_LOCK_CMD); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_ocmem_lock_available); | |
| /** | |
| * qcom_scm_ocmem_lock() - call OCMEM lock interface to assign an OCMEM | |
| * region to the specified initiator | |
| * | |
| * @id: tz initiator id | |
| * @offset: OCMEM offset | |
| * @size: OCMEM size | |
| * @mode: access mode (WIDE/NARROW) | |
| */ | |
| int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset, u32 size, | |
| u32 mode) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_OCMEM, | |
| .cmd = QCOM_SCM_OCMEM_LOCK_CMD, | |
| .args[0] = id, | |
| .args[1] = offset, | |
| .args[2] = size, | |
| .args[3] = mode, | |
| .arginfo = QCOM_SCM_ARGS(4), | |
| }; | |
| return qcom_scm_call(__scm->dev, &desc, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_ocmem_lock); | |
| /** | |
| * qcom_scm_ocmem_unlock() - call OCMEM unlock interface to release an OCMEM | |
| * region from the specified initiator | |
| * | |
| * @id: tz initiator id | |
| * @offset: OCMEM offset | |
| * @size: OCMEM size | |
| */ | |
| int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, u32 offset, u32 size) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_OCMEM, | |
| .cmd = QCOM_SCM_OCMEM_UNLOCK_CMD, | |
| .args[0] = id, | |
| .args[1] = offset, | |
| .args[2] = size, | |
| .arginfo = QCOM_SCM_ARGS(3), | |
| }; | |
| return qcom_scm_call(__scm->dev, &desc, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_ocmem_unlock); | |
| /** | |
| * qcom_scm_ice_available() - Is the ICE key programming interface available? | |
| * | |
| * Return: true iff the SCM calls wrapped by qcom_scm_ice_invalidate_key() and | |
| * qcom_scm_ice_set_key() are available. | |
| */ | |
| bool qcom_scm_ice_available(void) | |
| { | |
| return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_ES, | |
| QCOM_SCM_ES_INVALIDATE_ICE_KEY) && | |
| __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_ES, | |
| QCOM_SCM_ES_CONFIG_SET_ICE_KEY); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_ice_available); | |
| /** | |
| * qcom_scm_ice_invalidate_key() - Invalidate an inline encryption key | |
| * @index: the keyslot to invalidate | |
| * | |
| * The UFSHCI and eMMC standards define a standard way to do this, but it | |
| * doesn't work on these SoCs; only this SCM call does. | |
| * | |
| * It is assumed that the SoC has only one ICE instance being used, as this SCM | |
| * call doesn't specify which ICE instance the keyslot belongs to. | |
| * | |
| * Return: 0 on success; -errno on failure. | |
| */ | |
| int qcom_scm_ice_invalidate_key(u32 index) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_ES, | |
| .cmd = QCOM_SCM_ES_INVALIDATE_ICE_KEY, | |
| .arginfo = QCOM_SCM_ARGS(1), | |
| .args[0] = index, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| return qcom_scm_call(__scm->dev, &desc, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_ice_invalidate_key); | |
| /** | |
| * qcom_scm_ice_set_key() - Set an inline encryption key | |
| * @index: the keyslot into which to set the key | |
| * @key: the key to program | |
| * @key_size: the size of the key in bytes | |
| * @cipher: the encryption algorithm the key is for | |
| * @data_unit_size: the encryption data unit size, i.e. the size of each | |
| * individual plaintext and ciphertext. Given in 512-byte | |
| * units, e.g. 1 = 512 bytes, 8 = 4096 bytes, etc. | |
| * | |
| * Program a key into a keyslot of Qualcomm ICE (Inline Crypto Engine), where it | |
| * can then be used to encrypt/decrypt UFS or eMMC I/O requests inline. | |
| * | |
| * The UFSHCI and eMMC standards define a standard way to do this, but it | |
| * doesn't work on these SoCs; only this SCM call does. | |
| * | |
| * It is assumed that the SoC has only one ICE instance being used, as this SCM | |
| * call doesn't specify which ICE instance the keyslot belongs to. | |
| * | |
| * Return: 0 on success; -errno on failure. | |
| */ | |
| int qcom_scm_ice_set_key(u32 index, const u8 *key, u32 key_size, | |
| enum qcom_scm_ice_cipher cipher, u32 data_unit_size) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_ES, | |
| .cmd = QCOM_SCM_ES_CONFIG_SET_ICE_KEY, | |
| .arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_VAL, QCOM_SCM_RW, | |
| QCOM_SCM_VAL, QCOM_SCM_VAL, | |
| QCOM_SCM_VAL), | |
| .args[0] = index, | |
| .args[2] = key_size, | |
| .args[3] = cipher, | |
| .args[4] = data_unit_size, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| int ret; | |
| void *keybuf __free(qcom_tzmem) = qcom_tzmem_alloc(__scm->mempool, | |
| key_size, | |
| GFP_KERNEL); | |
| if (!keybuf) | |
| return -ENOMEM; | |
| memcpy(keybuf, key, key_size); | |
| desc.args[1] = qcom_tzmem_to_phys(keybuf); | |
| ret = qcom_scm_call(__scm->dev, &desc, NULL); | |
| memzero_explicit(keybuf, key_size); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_ice_set_key); | |
| /** | |
| * qcom_scm_hdcp_available() - Check if secure environment supports HDCP. | |
| * | |
| * Return true if HDCP is supported, false if not. | |
| */ | |
| bool qcom_scm_hdcp_available(void) | |
| { | |
| bool avail; | |
| int ret = qcom_scm_clk_enable(); | |
| if (ret) | |
| return ret; | |
| avail = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP, | |
| QCOM_SCM_HDCP_INVOKE); | |
| qcom_scm_clk_disable(); | |
| return avail; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_hdcp_available); | |
| /** | |
| * qcom_scm_hdcp_req() - Send HDCP request. | |
| * @req: HDCP request array | |
| * @req_cnt: HDCP request array count | |
| * @resp: response buffer passed to SCM | |
| * | |
| * Write HDCP register(s) through SCM. | |
| */ | |
| int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp) | |
| { | |
| int ret; | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_HDCP, | |
| .cmd = QCOM_SCM_HDCP_INVOKE, | |
| .arginfo = QCOM_SCM_ARGS(10), | |
| .args = { | |
| req[0].addr, | |
| req[0].val, | |
| req[1].addr, | |
| req[1].val, | |
| req[2].addr, | |
| req[2].val, | |
| req[3].addr, | |
| req[3].val, | |
| req[4].addr, | |
| req[4].val | |
| }, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| struct qcom_scm_res res; | |
| if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT) | |
| return -ERANGE; | |
| ret = qcom_scm_clk_enable(); | |
| if (ret) | |
| return ret; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| *resp = res.result[0]; | |
| qcom_scm_clk_disable(); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_hdcp_req); | |
| int qcom_scm_iommu_set_pt_format(u32 sec_id, u32 ctx_num, u32 pt_fmt) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_SMMU_PROGRAM, | |
| .cmd = QCOM_SCM_SMMU_PT_FORMAT, | |
| .arginfo = QCOM_SCM_ARGS(3), | |
| .args[0] = sec_id, | |
| .args[1] = ctx_num, | |
| .args[2] = pt_fmt, /* 0: LPAE AArch32 - 1: AArch64 */ | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| return qcom_scm_call(__scm->dev, &desc, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_iommu_set_pt_format); | |
| int qcom_scm_qsmmu500_wait_safe_toggle(bool en) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_SMMU_PROGRAM, | |
| .cmd = QCOM_SCM_SMMU_CONFIG_ERRATA1, | |
| .arginfo = QCOM_SCM_ARGS(2), | |
| .args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL, | |
| .args[1] = en, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| return qcom_scm_call_atomic(__scm->dev, &desc, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_qsmmu500_wait_safe_toggle); | |
| bool qcom_scm_lmh_dcvsh_available(void) | |
| { | |
| return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_LMH, QCOM_SCM_LMH_LIMIT_DCVSH); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_lmh_dcvsh_available); | |
| int qcom_scm_shm_bridge_enable(void) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_MP, | |
| .cmd = QCOM_SCM_MP_SHM_BRIDGE_ENABLE, | |
| .owner = ARM_SMCCC_OWNER_SIP | |
| }; | |
| struct qcom_scm_res res; | |
| if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_MP, | |
| QCOM_SCM_MP_SHM_BRIDGE_ENABLE)) | |
| return -EOPNOTSUPP; | |
| return qcom_scm_call(__scm->dev, &desc, &res) ?: res.result[0]; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_shm_bridge_enable); | |
| int qcom_scm_shm_bridge_create(struct device *dev, u64 pfn_and_ns_perm_flags, | |
| u64 ipfn_and_s_perm_flags, u64 size_and_flags, | |
| u64 ns_vmids, u64 *handle) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_MP, | |
| .cmd = QCOM_SCM_MP_SHM_BRIDGE_CREATE, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| .args[0] = pfn_and_ns_perm_flags, | |
| .args[1] = ipfn_and_s_perm_flags, | |
| .args[2] = size_and_flags, | |
| .args[3] = ns_vmids, | |
| .arginfo = QCOM_SCM_ARGS(4, QCOM_SCM_VAL, QCOM_SCM_VAL, | |
| QCOM_SCM_VAL, QCOM_SCM_VAL), | |
| }; | |
| struct qcom_scm_res res; | |
| int ret; | |
| ret = qcom_scm_call(__scm->dev, &desc, &res); | |
| if (handle && !ret) | |
| *handle = res.result[1]; | |
| return ret ?: res.result[0]; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_shm_bridge_create); | |
| int qcom_scm_shm_bridge_delete(struct device *dev, u64 handle) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_MP, | |
| .cmd = QCOM_SCM_MP_SHM_BRIDGE_DELETE, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| .args[0] = handle, | |
| .arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL), | |
| }; | |
| return qcom_scm_call(__scm->dev, &desc, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_shm_bridge_delete); | |
| int qcom_scm_lmh_profile_change(u32 profile_id) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_LMH, | |
| .cmd = QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE, | |
| .arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL), | |
| .args[0] = profile_id, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| return qcom_scm_call(__scm->dev, &desc, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_lmh_profile_change); | |
| int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val, | |
| u64 limit_node, u32 node_id, u64 version) | |
| { | |
| int ret, payload_size = 5 * sizeof(u32); | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_LMH, | |
| .cmd = QCOM_SCM_LMH_LIMIT_DCVSH, | |
| .arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_VAL, | |
| QCOM_SCM_VAL, QCOM_SCM_VAL), | |
| .args[1] = payload_size, | |
| .args[2] = limit_node, | |
| .args[3] = node_id, | |
| .args[4] = version, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| u32 *payload_buf __free(qcom_tzmem) = qcom_tzmem_alloc(__scm->mempool, | |
| payload_size, | |
| GFP_KERNEL); | |
| if (!payload_buf) | |
| return -ENOMEM; | |
| payload_buf[0] = payload_fn; | |
| payload_buf[1] = 0; | |
| payload_buf[2] = payload_reg; | |
| payload_buf[3] = 1; | |
| payload_buf[4] = payload_val; | |
| desc.args[0] = qcom_tzmem_to_phys(payload_buf); | |
| ret = qcom_scm_call(__scm->dev, &desc, NULL); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_lmh_dcvsh); | |
| int qcom_scm_gpu_init_regs(u32 gpu_req) | |
| { | |
| struct qcom_scm_desc desc = { | |
| .svc = QCOM_SCM_SVC_GPU, | |
| .cmd = QCOM_SCM_SVC_GPU_INIT_REGS, | |
| .arginfo = QCOM_SCM_ARGS(1), | |
| .args[0] = gpu_req, | |
| .owner = ARM_SMCCC_OWNER_SIP, | |
| }; | |
| return qcom_scm_call(__scm->dev, &desc, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_gpu_init_regs); | |
| static int qcom_scm_find_dload_address(struct device *dev, u64 *addr) | |
| { | |
| struct device_node *tcsr; | |
| struct device_node *np = dev->of_node; | |
| struct resource res; | |
| u32 offset; | |
| int ret; | |
| tcsr = of_parse_phandle(np, "qcom,dload-mode", 0); | |
| if (!tcsr) | |
| return 0; | |
| ret = of_address_to_resource(tcsr, 0, &res); | |
| of_node_put(tcsr); | |
| if (ret) | |
| return ret; | |
| ret = of_property_read_u32_index(np, "qcom,dload-mode", 1, &offset); | |
| if (ret < 0) | |
| return ret; | |
| *addr = res.start + offset; | |
| return 0; | |
| } | |
| #ifdef CONFIG_QCOM_QSEECOM | |
| /* Lock for QSEECOM SCM call executions */ | |
| static DEFINE_MUTEX(qcom_scm_qseecom_call_lock); | |
| static int __qcom_scm_qseecom_call(const struct qcom_scm_desc *desc, | |
| struct qcom_scm_qseecom_resp *res) | |
| { | |
| struct qcom_scm_res scm_res = {}; | |
| int status; | |
| /* | |
| * QSEECOM SCM calls should not be executed concurrently. Therefore, we | |
| * require the respective call lock to be held. | |
| */ | |
| lockdep_assert_held(&qcom_scm_qseecom_call_lock); | |
| status = qcom_scm_call(__scm->dev, desc, &scm_res); | |
| res->result = scm_res.result[0]; | |
| res->resp_type = scm_res.result[1]; | |
| res->data = scm_res.result[2]; | |
| if (status) | |
| return status; | |
| return 0; | |
| } | |
| /** | |
| * qcom_scm_qseecom_call() - Perform a QSEECOM SCM call. | |
| * @desc: SCM call descriptor. | |
| * @res: SCM call response (output). | |
| * | |
| * Performs the QSEECOM SCM call described by @desc, returning the response in | |
| * @rsp. | |
| * | |
| * Return: Zero on success, nonzero on failure. | |
| */ | |
| static int qcom_scm_qseecom_call(const struct qcom_scm_desc *desc, | |
| struct qcom_scm_qseecom_resp *res) | |
| { | |
| int status; | |
| /* | |
| * Note: Multiple QSEECOM SCM calls should not be executed same time, | |
| * so lock things here. This needs to be extended to callback/listener | |
| * handling when support for that is implemented. | |
| */ | |
| mutex_lock(&qcom_scm_qseecom_call_lock); | |
| status = __qcom_scm_qseecom_call(desc, res); | |
| mutex_unlock(&qcom_scm_qseecom_call_lock); | |
| dev_dbg(__scm->dev, "%s: owner=%x, svc=%x, cmd=%x, result=%lld, type=%llx, data=%llx\n", | |
| __func__, desc->owner, desc->svc, desc->cmd, res->result, | |
| res->resp_type, res->data); | |
| if (status) { | |
| dev_err(__scm->dev, "qseecom: scm call failed with error %d\n", status); | |
| return status; | |
| } | |
| /* | |
| * TODO: Handle incomplete and blocked calls: | |
| * | |
| * Incomplete and blocked calls are not supported yet. Some devices | |
| * and/or commands require those, some don't. Let's warn about them | |
| * prominently in case someone attempts to try these commands with a | |
| * device/command combination that isn't supported yet. | |
| */ | |
| WARN_ON(res->result == QSEECOM_RESULT_INCOMPLETE); | |
| WARN_ON(res->result == QSEECOM_RESULT_BLOCKED_ON_LISTENER); | |
| return 0; | |
| } | |
| /** | |
| * qcom_scm_qseecom_get_version() - Query the QSEECOM version. | |
| * @version: Pointer where the QSEECOM version will be stored. | |
| * | |
| * Performs the QSEECOM SCM querying the QSEECOM version currently running in | |
| * the TrustZone. | |
| * | |
| * Return: Zero on success, nonzero on failure. | |
| */ | |
| static int qcom_scm_qseecom_get_version(u32 *version) | |
| { | |
| struct qcom_scm_desc desc = {}; | |
| struct qcom_scm_qseecom_resp res = {}; | |
| u32 feature = 10; | |
| int ret; | |
| desc.owner = QSEECOM_TZ_OWNER_SIP; | |
| desc.svc = QSEECOM_TZ_SVC_INFO; | |
| desc.cmd = QSEECOM_TZ_CMD_INFO_VERSION; | |
| desc.arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL); | |
| desc.args[0] = feature; | |
| ret = qcom_scm_qseecom_call(&desc, &res); | |
| if (ret) | |
| return ret; | |
| *version = res.result; | |
| return 0; | |
| } | |
| /** | |
| * qcom_scm_qseecom_app_get_id() - Query the app ID for a given QSEE app name. | |
| * @app_name: The name of the app. | |
| * @app_id: The returned app ID. | |
| * | |
| * Query and return the application ID of the SEE app identified by the given | |
| * name. This returned ID is the unique identifier of the app required for | |
| * subsequent communication. | |
| * | |
| * Return: Zero on success, nonzero on failure, -ENOENT if the app has not been | |
| * loaded or could not be found. | |
| */ | |
| int qcom_scm_qseecom_app_get_id(const char *app_name, u32 *app_id) | |
| { | |
| unsigned long name_buf_size = QSEECOM_MAX_APP_NAME_SIZE; | |
| unsigned long app_name_len = strlen(app_name); | |
| struct qcom_scm_desc desc = {}; | |
| struct qcom_scm_qseecom_resp res = {}; | |
| int status; | |
| if (app_name_len >= name_buf_size) | |
| return -EINVAL; | |
| char *name_buf __free(qcom_tzmem) = qcom_tzmem_alloc(__scm->mempool, | |
| name_buf_size, | |
| GFP_KERNEL); | |
| if (!name_buf) | |
| return -ENOMEM; | |
| memcpy(name_buf, app_name, app_name_len); | |
| desc.owner = QSEECOM_TZ_OWNER_QSEE_OS; | |
| desc.svc = QSEECOM_TZ_SVC_APP_MGR; | |
| desc.cmd = QSEECOM_TZ_CMD_APP_LOOKUP; | |
| desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_RW, QCOM_SCM_VAL); | |
| desc.args[0] = qcom_tzmem_to_phys(name_buf); | |
| desc.args[1] = app_name_len; | |
| status = qcom_scm_qseecom_call(&desc, &res); | |
| if (status) | |
| return status; | |
| if (res.result == QSEECOM_RESULT_FAILURE) | |
| return -ENOENT; | |
| if (res.result != QSEECOM_RESULT_SUCCESS) | |
| return -EINVAL; | |
| if (res.resp_type != QSEECOM_SCM_RES_APP_ID) | |
| return -EINVAL; | |
| *app_id = res.data; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_get_id); | |
| /** | |
| * qcom_scm_qseecom_app_send() - Send to and receive data from a given QSEE app. | |
| * @app_id: The ID of the target app. | |
| * @req: Request buffer sent to the app (must be TZ memory) | |
| * @req_size: Size of the request buffer. | |
| * @rsp: Response buffer, written to by the app (must be TZ memory) | |
| * @rsp_size: Size of the response buffer. | |
| * | |
| * Sends a request to the QSEE app associated with the given ID and read back | |
| * its response. The caller must provide two DMA memory regions, one for the | |
| * request and one for the response, and fill out the @req region with the | |
| * respective (app-specific) request data. The QSEE app reads this and returns | |
| * its response in the @rsp region. | |
| * | |
| * Return: Zero on success, nonzero on failure. | |
| */ | |
| int qcom_scm_qseecom_app_send(u32 app_id, void *req, size_t req_size, | |
| void *rsp, size_t rsp_size) | |
| { | |
| struct qcom_scm_qseecom_resp res = {}; | |
| struct qcom_scm_desc desc = {}; | |
| phys_addr_t req_phys; | |
| phys_addr_t rsp_phys; | |
| int status; | |
| req_phys = qcom_tzmem_to_phys(req); | |
| rsp_phys = qcom_tzmem_to_phys(rsp); | |
| desc.owner = QSEECOM_TZ_OWNER_TZ_APPS; | |
| desc.svc = QSEECOM_TZ_SVC_APP_ID_PLACEHOLDER; | |
| desc.cmd = QSEECOM_TZ_CMD_APP_SEND; | |
| desc.arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_VAL, | |
| QCOM_SCM_RW, QCOM_SCM_VAL, | |
| QCOM_SCM_RW, QCOM_SCM_VAL); | |
| desc.args[0] = app_id; | |
| desc.args[1] = req_phys; | |
| desc.args[2] = req_size; | |
| desc.args[3] = rsp_phys; | |
| desc.args[4] = rsp_size; | |
| status = qcom_scm_qseecom_call(&desc, &res); | |
| if (status) | |
| return status; | |
| if (res.result != QSEECOM_RESULT_SUCCESS) | |
| return -EIO; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send); | |
| /* | |
| * We do not yet support re-entrant calls via the qseecom interface. To prevent | |
| + any potential issues with this, only allow validated machines for now. | |
| */ | |
| static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = { | |
| { .compatible = "lenovo,flex-5g" }, | |
| { .compatible = "lenovo,thinkpad-t14s" }, | |
| { .compatible = "lenovo,thinkpad-x13s", }, | |
| { .compatible = "microsoft,romulus13", }, | |
| { .compatible = "microsoft,romulus15", }, | |
| { .compatible = "qcom,sc8180x-primus" }, | |
| { .compatible = "qcom,x1e80100-crd" }, | |
| { .compatible = "qcom,x1e80100-qcp" }, | |
| { } | |
| }; | |
| static bool qcom_scm_qseecom_machine_is_allowed(void) | |
| { | |
| struct device_node *np; | |
| bool match; | |
| np = of_find_node_by_path("/"); | |
| if (!np) | |
| return false; | |
| match = of_match_node(qcom_scm_qseecom_allowlist, np); | |
| of_node_put(np); | |
| return match; | |
| } | |
| static void qcom_scm_qseecom_free(void *data) | |
| { | |
| struct platform_device *qseecom_dev = data; | |
| platform_device_del(qseecom_dev); | |
| platform_device_put(qseecom_dev); | |
| } | |
| static int qcom_scm_qseecom_init(struct qcom_scm *scm) | |
| { | |
| struct platform_device *qseecom_dev; | |
| u32 version; | |
| int ret; | |
| /* | |
| * Note: We do two steps of validation here: First, we try to query the | |
| * QSEECOM version as a check to see if the interface exists on this | |
| * device. Second, we check against known good devices due to current | |
| * driver limitations (see comment in qcom_scm_qseecom_allowlist). | |
| * | |
| * Note that we deliberately do the machine check after the version | |
| * check so that we can log potentially supported devices. This should | |
| * be safe as downstream sources indicate that the version query is | |
| * neither blocking nor reentrant. | |
| */ | |
| ret = qcom_scm_qseecom_get_version(&version); | |
| if (ret) | |
| return 0; | |
| dev_info(scm->dev, "qseecom: found qseecom with version 0x%x\n", version); | |
| if (!qcom_scm_qseecom_machine_is_allowed()) { | |
| dev_info(scm->dev, "qseecom: untested machine, skipping\n"); | |
| return 0; | |
| } | |
| /* | |
| * Set up QSEECOM interface device. All application clients will be | |
| * set up and managed by the corresponding driver for it. | |
| */ | |
| qseecom_dev = platform_device_alloc("qcom_qseecom", -1); | |
| if (!qseecom_dev) | |
| return -ENOMEM; | |
| qseecom_dev->dev.parent = scm->dev; | |
| ret = platform_device_add(qseecom_dev); | |
| if (ret) { | |
| platform_device_put(qseecom_dev); | |
| return ret; | |
| } | |
| return devm_add_action_or_reset(scm->dev, qcom_scm_qseecom_free, qseecom_dev); | |
| } | |
| #else /* CONFIG_QCOM_QSEECOM */ | |
| static int qcom_scm_qseecom_init(struct qcom_scm *scm) | |
| { | |
| return 0; | |
| } | |
| #endif /* CONFIG_QCOM_QSEECOM */ | |
| /** | |
| * qcom_scm_is_available() - Checks if SCM is available | |
| */ | |
| bool qcom_scm_is_available(void) | |
| { | |
| return !!READ_ONCE(__scm); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_scm_is_available); | |
| static int qcom_scm_assert_valid_wq_ctx(u32 wq_ctx) | |
| { | |
| /* FW currently only supports a single wq_ctx (zero). | |
| * TODO: Update this logic to include dynamic allocation and lookup of | |
| * completion structs when FW supports more wq_ctx values. | |
| */ | |
| if (wq_ctx != 0) { | |
| dev_err(__scm->dev, "Firmware unexpectedly passed non-zero wq_ctx\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| int qcom_scm_wait_for_wq_completion(u32 wq_ctx) | |
| { | |
| int ret; | |
| ret = qcom_scm_assert_valid_wq_ctx(wq_ctx); | |
| if (ret) | |
| return ret; | |
| wait_for_completion(&__scm->waitq_comp); | |
| return 0; | |
| } | |
| static int qcom_scm_waitq_wakeup(unsigned int wq_ctx) | |
| { | |
| int ret; | |
| ret = qcom_scm_assert_valid_wq_ctx(wq_ctx); | |
| if (ret) | |
| return ret; | |
| complete(&__scm->waitq_comp); | |
| return 0; | |
| } | |
| static irqreturn_t qcom_scm_irq_handler(int irq, void *data) | |
| { | |
| int ret; | |
| struct qcom_scm *scm = data; | |
| u32 wq_ctx, flags, more_pending = 0; | |
| do { | |
| ret = scm_get_wq_ctx(&wq_ctx, &flags, &more_pending); | |
| if (ret) { | |
| dev_err(scm->dev, "GET_WQ_CTX SMC call failed: %d\n", ret); | |
| goto out; | |
| } | |
| if (flags != QCOM_SMC_WAITQ_FLAG_WAKE_ONE) { | |
| dev_err(scm->dev, "Invalid flags received for wq_ctx: %u\n", flags); | |
| goto out; | |
| } | |
| ret = qcom_scm_waitq_wakeup(wq_ctx); | |
| if (ret) | |
| goto out; | |
| } while (more_pending); | |
| out: | |
| return IRQ_HANDLED; | |
| } | |
| static int get_download_mode(char *buffer, const struct kernel_param *kp) | |
| { | |
| if (download_mode >= ARRAY_SIZE(download_mode_name)) | |
| return sysfs_emit(buffer, "unknown mode\n"); | |
| return sysfs_emit(buffer, "%s\n", download_mode_name[download_mode]); | |
| } | |
| static int set_download_mode(const char *val, const struct kernel_param *kp) | |
| { | |
| bool tmp; | |
| int ret; | |
| ret = sysfs_match_string(download_mode_name, val); | |
| if (ret < 0) { | |
| ret = kstrtobool(val, &tmp); | |
| if (ret < 0) { | |
| pr_err("qcom_scm: err: %d\n", ret); | |
| return ret; | |
| } | |
| ret = tmp ? 1 : 0; | |
| } | |
| download_mode = ret; | |
| if (__scm) | |
| qcom_scm_set_download_mode(download_mode); | |
| return 0; | |
| } | |
| static const struct kernel_param_ops download_mode_param_ops = { | |
| .get = get_download_mode, | |
| .set = set_download_mode, | |
| }; | |
| module_param_cb(download_mode, &download_mode_param_ops, NULL, 0644); | |
| MODULE_PARM_DESC(download_mode, "download mode: off/0/N for no dump mode, full/on/1/Y for full dump mode, mini for minidump mode and full,mini for both full and minidump mode together are acceptable values"); | |
| static int qcom_scm_probe(struct platform_device *pdev) | |
| { | |
| struct qcom_tzmem_pool_config pool_config; | |
| struct qcom_scm *scm; | |
| int irq, ret; | |
| scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL); | |
| if (!scm) | |
| return -ENOMEM; | |
| scm->dev = &pdev->dev; | |
| ret = qcom_scm_find_dload_address(&pdev->dev, &scm->dload_mode_addr); | |
| if (ret < 0) | |
| return ret; | |
| init_completion(&scm->waitq_comp); | |
| mutex_init(&scm->scm_bw_lock); | |
| scm->path = devm_of_icc_get(&pdev->dev, NULL); | |
| if (IS_ERR(scm->path)) | |
| return dev_err_probe(&pdev->dev, PTR_ERR(scm->path), | |
| "failed to acquire interconnect path\n"); | |
| scm->core_clk = devm_clk_get_optional(&pdev->dev, "core"); | |
| if (IS_ERR(scm->core_clk)) | |
| return PTR_ERR(scm->core_clk); | |
| scm->iface_clk = devm_clk_get_optional(&pdev->dev, "iface"); | |
| if (IS_ERR(scm->iface_clk)) | |
| return PTR_ERR(scm->iface_clk); | |
| scm->bus_clk = devm_clk_get_optional(&pdev->dev, "bus"); | |
| if (IS_ERR(scm->bus_clk)) | |
| return PTR_ERR(scm->bus_clk); | |
| scm->reset.ops = &qcom_scm_pas_reset_ops; | |
| scm->reset.nr_resets = 1; | |
| scm->reset.of_node = pdev->dev.of_node; | |
| ret = devm_reset_controller_register(&pdev->dev, &scm->reset); | |
| if (ret) | |
| return ret; | |
| /* vote for max clk rate for highest performance */ | |
| ret = clk_set_rate(scm->core_clk, INT_MAX); | |
| if (ret) | |
| return ret; | |
| /* Let all above stores be available after this */ | |
| smp_store_release(&__scm, scm); | |
| irq = platform_get_irq_optional(pdev, 0); | |
| if (irq < 0) { | |
| if (irq != -ENXIO) | |
| return irq; | |
| } else { | |
| ret = devm_request_threaded_irq(__scm->dev, irq, NULL, qcom_scm_irq_handler, | |
| IRQF_ONESHOT, "qcom-scm", __scm); | |
| if (ret < 0) | |
| return dev_err_probe(scm->dev, ret, "Failed to request qcom-scm irq\n"); | |
| } | |
| __get_convention(); | |
| /* | |
| * If "download mode" is requested, from this point on warmboot | |
| * will cause the boot stages to enter download mode, unless | |
| * disabled below by a clean shutdown/reboot. | |
| */ | |
| qcom_scm_set_download_mode(download_mode); | |
| /* | |
| * Disable SDI if indicated by DT that it is enabled by default. | |
| */ | |
| if (of_property_read_bool(pdev->dev.of_node, "qcom,sdi-enabled") || !download_mode) | |
| qcom_scm_disable_sdi(); | |
| ret = of_reserved_mem_device_init(__scm->dev); | |
| if (ret && ret != -ENODEV) | |
| return dev_err_probe(__scm->dev, ret, | |
| "Failed to setup the reserved memory region for TZ mem\n"); | |
| ret = qcom_tzmem_enable(__scm->dev); | |
| if (ret) | |
| return dev_err_probe(__scm->dev, ret, | |
| "Failed to enable the TrustZone memory allocator\n"); | |
| memset(&pool_config, 0, sizeof(pool_config)); | |
| pool_config.initial_size = 0; | |
| pool_config.policy = QCOM_TZMEM_POLICY_ON_DEMAND; | |
| pool_config.max_size = SZ_256K; | |
| __scm->mempool = devm_qcom_tzmem_pool_new(__scm->dev, &pool_config); | |
| if (IS_ERR(__scm->mempool)) | |
| return dev_err_probe(__scm->dev, PTR_ERR(__scm->mempool), | |
| "Failed to create the SCM memory pool\n"); | |
| /* | |
| * Initialize the QSEECOM interface. | |
| * | |
| * Note: QSEECOM is fairly self-contained and this only adds the | |
| * interface device (the driver of which does most of the heavy | |
| * lifting). So any errors returned here should be either -ENOMEM or | |
| * -EINVAL (with the latter only in case there's a bug in our code). | |
| * This means that there is no need to bring down the whole SCM driver. | |
| * Just log the error instead and let SCM live. | |
| */ | |
| ret = qcom_scm_qseecom_init(scm); | |
| WARN(ret < 0, "failed to initialize qseecom: %d\n", ret); | |
| return 0; | |
| } | |
| static void qcom_scm_shutdown(struct platform_device *pdev) | |
| { | |
| /* Clean shutdown, disable download mode to allow normal restart */ | |
| qcom_scm_set_download_mode(QCOM_DLOAD_NODUMP); | |
| } | |
| static const struct of_device_id qcom_scm_dt_match[] = { | |
| { .compatible = "qcom,scm" }, | |
| /* Legacy entries kept for backwards compatibility */ | |
| { .compatible = "qcom,scm-apq8064" }, | |
| { .compatible = "qcom,scm-apq8084" }, | |
| { .compatible = "qcom,scm-ipq4019" }, | |
| { .compatible = "qcom,scm-msm8953" }, | |
| { .compatible = "qcom,scm-msm8974" }, | |
| { .compatible = "qcom,scm-msm8996" }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, qcom_scm_dt_match); | |
| static struct platform_driver qcom_scm_driver = { | |
| .driver = { | |
| .name = "qcom_scm", | |
| .of_match_table = qcom_scm_dt_match, | |
| .suppress_bind_attrs = true, | |
| }, | |
| .probe = qcom_scm_probe, | |
| .shutdown = qcom_scm_shutdown, | |
| }; | |
| static int __init qcom_scm_init(void) | |
| { | |
| return platform_driver_register(&qcom_scm_driver); | |
| } | |
| subsys_initcall(qcom_scm_init); | |
| MODULE_DESCRIPTION("Qualcomm Technologies, Inc. SCM driver"); | |
| MODULE_LICENSE("GPL v2"); |