| /* | |
| * Copyright 2012-2023 Advanced Micro Devices, Inc. | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice shall be included in | |
| * all copies or substantial portions of the Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR | |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, | |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
| * OTHER DEALINGS IN THE SOFTWARE. | |
| * | |
| * Authors: AMD | |
| * | |
| */ | |
| #ifndef DC_INTERFACE_H_ | |
| #define DC_INTERFACE_H_ | |
| #include "dc_types.h" | |
| #include "dc_state.h" | |
| #include "dc_plane.h" | |
| #include "grph_object_defs.h" | |
| #include "logger_types.h" | |
| #include "hdcp_msg_types.h" | |
| #include "gpio_types.h" | |
| #include "link_service_types.h" | |
| #include "grph_object_ctrl_defs.h" | |
| #include <inc/hw/opp.h> | |
| #include "hwss/hw_sequencer.h" | |
| #include "inc/compressor.h" | |
| #include "inc/hw/dmcu.h" | |
| #include "dml/display_mode_lib.h" | |
| #include "dml2/dml2_wrapper.h" | |
| #include "dmub/inc/dmub_cmd.h" | |
| #include "spl/dc_spl_types.h" | |
| struct abm_save_restore; | |
| /* forward declaration */ | |
| struct aux_payload; | |
| struct set_config_cmd_payload; | |
| struct dmub_notification; | |
| #define DC_VER "3.2.301" | |
| #define MAX_SURFACES 3 | |
| #define MAX_PLANES 6 | |
| #define MAX_STREAMS 6 | |
| #define MIN_VIEWPORT_SIZE 12 | |
| #define MAX_NUM_EDP 2 | |
| #define MAX_HOST_ROUTERS_NUM 2 | |
| /* Display Core Interfaces */ | |
| struct dc_versions { | |
| const char *dc_ver; | |
| struct dmcu_version dmcu_version; | |
| }; | |
| enum dp_protocol_version { | |
| DP_VERSION_1_4 = 0, | |
| DP_VERSION_2_1, | |
| DP_VERSION_UNKNOWN, | |
| }; | |
| enum dc_plane_type { | |
| DC_PLANE_TYPE_INVALID, | |
| DC_PLANE_TYPE_DCE_RGB, | |
| DC_PLANE_TYPE_DCE_UNDERLAY, | |
| DC_PLANE_TYPE_DCN_UNIVERSAL, | |
| }; | |
| // Sizes defined as multiples of 64KB | |
| enum det_size { | |
| DET_SIZE_DEFAULT = 0, | |
| DET_SIZE_192KB = 3, | |
| DET_SIZE_256KB = 4, | |
| DET_SIZE_320KB = 5, | |
| DET_SIZE_384KB = 6 | |
| }; | |
| struct dc_plane_cap { | |
| enum dc_plane_type type; | |
| uint32_t per_pixel_alpha : 1; | |
| struct { | |
| uint32_t argb8888 : 1; | |
| uint32_t nv12 : 1; | |
| uint32_t fp16 : 1; | |
| uint32_t p010 : 1; | |
| uint32_t ayuv : 1; | |
| } pixel_format_support; | |
| // max upscaling factor x1000 | |
| // upscaling factors are always >= 1 | |
| // for example, 1080p -> 8K is 4.0, or 4000 raw value | |
| struct { | |
| uint32_t argb8888; | |
| uint32_t nv12; | |
| uint32_t fp16; | |
| } max_upscale_factor; | |
| // max downscale factor x1000 | |
| // downscale factors are always <= 1 | |
| // for example, 8K -> 1080p is 0.25, or 250 raw value | |
| struct { | |
| uint32_t argb8888; | |
| uint32_t nv12; | |
| uint32_t fp16; | |
| } max_downscale_factor; | |
| // minimal width/height | |
| uint32_t min_width; | |
| uint32_t min_height; | |
| }; | |
| /** | |
| * DOC: color-management-caps | |
| * | |
| * **Color management caps (DPP and MPC)** | |
| * | |
| * Modules/color calculates various color operations which are translated to | |
| * abstracted HW. DCE 5-12 had almost no important changes, but starting with | |
| * DCN1, every new generation comes with fairly major differences in color | |
| * pipeline. Therefore, we abstract color pipe capabilities so modules/DM can | |
| * decide mapping to HW block based on logical capabilities. | |
| */ | |
| /** | |
| * struct rom_curve_caps - predefined transfer function caps for degamma and regamma | |
| * @srgb: RGB color space transfer func | |
| * @bt2020: BT.2020 transfer func | |
| * @gamma2_2: standard gamma | |
| * @pq: perceptual quantizer transfer function | |
| * @hlg: hybrid log–gamma transfer function | |
| */ | |
| struct rom_curve_caps { | |
| uint16_t srgb : 1; | |
| uint16_t bt2020 : 1; | |
| uint16_t gamma2_2 : 1; | |
| uint16_t pq : 1; | |
| uint16_t hlg : 1; | |
| }; | |
| /** | |
| * struct dpp_color_caps - color pipeline capabilities for display pipe and | |
| * plane blocks | |
| * | |
| * @dcn_arch: all DCE generations treated the same | |
| * @input_lut_shared: shared with DGAM. Input LUT is different than most LUTs, | |
| * just plain 256-entry lookup | |
| * @icsc: input color space conversion | |
| * @dgam_ram: programmable degamma LUT | |
| * @post_csc: post color space conversion, before gamut remap | |
| * @gamma_corr: degamma correction | |
| * @hw_3d_lut: 3D LUT support. It implies a shaper LUT before. It may be shared | |
| * with MPC by setting mpc:shared_3d_lut flag | |
| * @ogam_ram: programmable out/blend gamma LUT | |
| * @ocsc: output color space conversion | |
| * @dgam_rom_for_yuv: pre-defined degamma LUT for YUV planes | |
| * @dgam_rom_caps: pre-definied curve caps for degamma 1D LUT | |
| * @ogam_rom_caps: pre-definied curve caps for regamma 1D LUT | |
| * | |
| * Note: hdr_mult and gamut remap (CTM) are always available in DPP (in that order) | |
| */ | |
| struct dpp_color_caps { | |
| uint16_t dcn_arch : 1; | |
| uint16_t input_lut_shared : 1; | |
| uint16_t icsc : 1; | |
| uint16_t dgam_ram : 1; | |
| uint16_t post_csc : 1; | |
| uint16_t gamma_corr : 1; | |
| uint16_t hw_3d_lut : 1; | |
| uint16_t ogam_ram : 1; | |
| uint16_t ocsc : 1; | |
| uint16_t dgam_rom_for_yuv : 1; | |
| struct rom_curve_caps dgam_rom_caps; | |
| struct rom_curve_caps ogam_rom_caps; | |
| }; | |
| /** | |
| * struct mpc_color_caps - color pipeline capabilities for multiple pipe and | |
| * plane combined blocks | |
| * | |
| * @gamut_remap: color transformation matrix | |
| * @ogam_ram: programmable out gamma LUT | |
| * @ocsc: output color space conversion matrix | |
| * @num_3dluts: MPC 3D LUT; always assumes a preceding shaper LUT | |
| * @shared_3d_lut: shared 3D LUT flag. Can be either DPP or MPC, but single | |
| * instance | |
| * @ogam_rom_caps: pre-definied curve caps for regamma 1D LUT | |
| */ | |
| struct mpc_color_caps { | |
| uint16_t gamut_remap : 1; | |
| uint16_t ogam_ram : 1; | |
| uint16_t ocsc : 1; | |
| uint16_t num_3dluts : 3; | |
| uint16_t shared_3d_lut:1; | |
| struct rom_curve_caps ogam_rom_caps; | |
| }; | |
| /** | |
| * struct dc_color_caps - color pipes capabilities for DPP and MPC hw blocks | |
| * @dpp: color pipes caps for DPP | |
| * @mpc: color pipes caps for MPC | |
| */ | |
| struct dc_color_caps { | |
| struct dpp_color_caps dpp; | |
| struct mpc_color_caps mpc; | |
| }; | |
| struct dc_dmub_caps { | |
| bool psr; | |
| bool mclk_sw; | |
| bool subvp_psr; | |
| bool gecc_enable; | |
| uint8_t fams_ver; | |
| }; | |
| struct dc_caps { | |
| uint32_t max_streams; | |
| uint32_t max_links; | |
| uint32_t max_audios; | |
| uint32_t max_slave_planes; | |
| uint32_t max_slave_yuv_planes; | |
| uint32_t max_slave_rgb_planes; | |
| uint32_t max_planes; | |
| uint32_t max_downscale_ratio; | |
| uint32_t i2c_speed_in_khz; | |
| uint32_t i2c_speed_in_khz_hdcp; | |
| uint32_t dmdata_alloc_size; | |
| unsigned int max_cursor_size; | |
| unsigned int max_video_width; | |
| /* | |
| * max video plane width that can be safely assumed to be always | |
| * supported by single DPP pipe. | |
| */ | |
| unsigned int max_optimizable_video_width; | |
| unsigned int min_horizontal_blanking_period; | |
| int linear_pitch_alignment; | |
| bool dcc_const_color; | |
| bool dynamic_audio; | |
| bool is_apu; | |
| bool dual_link_dvi; | |
| bool post_blend_color_processing; | |
| bool force_dp_tps4_for_cp2520; | |
| bool disable_dp_clk_share; | |
| bool psp_setup_panel_mode; | |
| bool extended_aux_timeout_support; | |
| bool dmcub_support; | |
| bool zstate_support; | |
| bool ips_support; | |
| uint32_t num_of_internal_disp; | |
| enum dp_protocol_version max_dp_protocol_version; | |
| unsigned int mall_size_per_mem_channel; | |
| unsigned int mall_size_total; | |
| unsigned int cursor_cache_size; | |
| struct dc_plane_cap planes[MAX_PLANES]; | |
| struct dc_color_caps color; | |
| struct dc_dmub_caps dmub_caps; | |
| bool dp_hpo; | |
| bool dp_hdmi21_pcon_support; | |
| bool edp_dsc_support; | |
| bool vbios_lttpr_aware; | |
| bool vbios_lttpr_enable; | |
| uint32_t max_otg_num; | |
| uint32_t max_cab_allocation_bytes; | |
| uint32_t cache_line_size; | |
| uint32_t cache_num_ways; | |
| uint16_t subvp_fw_processing_delay_us; | |
| uint8_t subvp_drr_max_vblank_margin_us; | |
| uint16_t subvp_prefetch_end_to_mall_start_us; | |
| uint8_t subvp_swath_height_margin_lines; // subvp start line must be aligned to 2 x swath height | |
| uint16_t subvp_pstate_allow_width_us; | |
| uint16_t subvp_vertical_int_margin_us; | |
| bool seamless_odm; | |
| uint32_t max_v_total; | |
| uint32_t max_disp_clock_khz_at_vmin; | |
| uint8_t subvp_drr_vblank_start_margin_us; | |
| bool cursor_not_scaled; | |
| bool dcmode_power_limits_present; | |
| bool sequential_ono; | |
| /* Conservative limit for DCC cases which require ODM4:1 to support*/ | |
| uint32_t dcc_plane_width_limit; | |
| }; | |
| struct dc_bug_wa { | |
| bool no_connect_phy_config; | |
| bool dedcn20_305_wa; | |
| bool skip_clock_update; | |
| bool lt_early_cr_pattern; | |
| struct { | |
| uint8_t uclk : 1; | |
| uint8_t fclk : 1; | |
| uint8_t dcfclk : 1; | |
| uint8_t dcfclk_ds: 1; | |
| } clock_update_disable_mask; | |
| bool skip_psr_ips_crtc_disable; | |
| }; | |
| struct dc_dcc_surface_param { | |
| struct dc_size surface_size; | |
| enum surface_pixel_format format; | |
| unsigned int plane0_pitch; | |
| struct dc_size plane1_size; | |
| unsigned int plane1_pitch; | |
| union { | |
| enum swizzle_mode_values swizzle_mode; | |
| enum swizzle_mode_addr3_values swizzle_mode_addr3; | |
| }; | |
| enum dc_scan_direction scan; | |
| }; | |
| struct dc_dcc_setting { | |
| unsigned int max_compressed_blk_size; | |
| unsigned int max_uncompressed_blk_size; | |
| bool independent_64b_blks; | |
| //These bitfields to be used starting with DCN 3.0 | |
| struct { | |
| uint32_t dcc_256_64_64 : 1;//available in ASICs before DCN 3.0 (the worst compression case) | |
| uint32_t dcc_128_128_uncontrained : 1; //available in ASICs before DCN 3.0 | |
| uint32_t dcc_256_128_128 : 1; //available starting with DCN 3.0 | |
| uint32_t dcc_256_256_unconstrained : 1; //available in ASICs before DCN 3.0 (the best compression case) | |
| uint32_t dcc_256_256 : 1; //available in ASICs starting with DCN 4.0x (the best compression case) | |
| uint32_t dcc_256_128 : 1; //available in ASICs starting with DCN 4.0x | |
| uint32_t dcc_256_64 : 1; //available in ASICs starting with DCN 4.0x (the worst compression case) | |
| } dcc_controls; | |
| }; | |
| struct dc_surface_dcc_cap { | |
| union { | |
| struct { | |
| struct dc_dcc_setting rgb; | |
| } grph; | |
| struct { | |
| struct dc_dcc_setting luma; | |
| struct dc_dcc_setting chroma; | |
| } video; | |
| }; | |
| bool capable; | |
| bool const_color_support; | |
| }; | |
| struct dc_static_screen_params { | |
| struct { | |
| bool force_trigger; | |
| bool cursor_update; | |
| bool surface_update; | |
| bool overlay_update; | |
| } triggers; | |
| unsigned int num_frames; | |
| }; | |
| /* Surface update type is used by dc_update_surfaces_and_stream | |
| * The update type is determined at the very beginning of the function based | |
| * on parameters passed in and decides how much programming (or updating) is | |
| * going to be done during the call. | |
| * | |
| * UPDATE_TYPE_FAST is used for really fast updates that do not require much | |
| * logical calculations or hardware register programming. This update MUST be | |
| * ISR safe on windows. Currently fast update will only be used to flip surface | |
| * address. | |
| * | |
| * UPDATE_TYPE_MED is used for slower updates which require significant hw | |
| * re-programming however do not affect bandwidth consumption or clock | |
| * requirements. At present, this is the level at which front end updates | |
| * that do not require us to run bw_calcs happen. These are in/out transfer func | |
| * updates, viewport offset changes, recout size changes and pixel depth changes. | |
| * This update can be done at ISR, but we want to minimize how often this happens. | |
| * | |
| * UPDATE_TYPE_FULL is slow. Really slow. This requires us to recalculate our | |
| * bandwidth and clocks, possibly rearrange some pipes and reprogram anything front | |
| * end related. Any time viewport dimensions, recout dimensions, scaling ratios or | |
| * gamma need to be adjusted or pipe needs to be turned on (or disconnected) we do | |
| * a full update. This cannot be done at ISR level and should be a rare event. | |
| * Unless someone is stress testing mpo enter/exit, playing with colour or adjusting | |
| * underscan we don't expect to see this call at all. | |
| */ | |
| enum surface_update_type { | |
| UPDATE_TYPE_FAST, /* super fast, safe to execute in isr */ | |
| UPDATE_TYPE_MED, /* ISR safe, most of programming needed, no bw/clk change*/ | |
| UPDATE_TYPE_FULL, /* may need to shuffle resources */ | |
| }; | |
| /* Forward declaration*/ | |
| struct dc; | |
| struct dc_plane_state; | |
| struct dc_state; | |
| struct dc_cap_funcs { | |
| bool (*get_dcc_compression_cap)(const struct dc *dc, | |
| const struct dc_dcc_surface_param *input, | |
| struct dc_surface_dcc_cap *output); | |
| bool (*get_subvp_en)(struct dc *dc, struct dc_state *context); | |
| }; | |
| struct link_training_settings; | |
| union allow_lttpr_non_transparent_mode { | |
| struct { | |
| bool DP1_4A : 1; | |
| bool DP2_0 : 1; | |
| } bits; | |
| unsigned char raw; | |
| }; | |
| /* Structure to hold configuration flags set by dm at dc creation. */ | |
| struct dc_config { | |
| bool gpu_vm_support; | |
| bool disable_disp_pll_sharing; | |
| bool fbc_support; | |
| bool disable_fractional_pwm; | |
| bool allow_seamless_boot_optimization; | |
| bool seamless_boot_edp_requested; | |
| bool edp_not_connected; | |
| bool edp_no_power_sequencing; | |
| bool force_enum_edp; | |
| bool forced_clocks; | |
| union allow_lttpr_non_transparent_mode allow_lttpr_non_transparent_mode; | |
| bool multi_mon_pp_mclk_switch; | |
| bool disable_dmcu; | |
| bool enable_4to1MPC; | |
| bool enable_windowed_mpo_odm; | |
| bool forceHBR2CP2520; // Used for switching between test patterns TPS4 and CP2520 | |
| uint32_t allow_edp_hotplug_detection; | |
| bool clamp_min_dcfclk; | |
| uint64_t vblank_alignment_dto_params; | |
| uint8_t vblank_alignment_max_frame_time_diff; | |
| bool is_asymmetric_memory; | |
| bool is_single_rank_dimm; | |
| bool is_vmin_only_asic; | |
| bool use_spl; | |
| bool prefer_easf; | |
| bool use_pipe_ctx_sync_logic; | |
| bool ignore_dpref_ss; | |
| bool enable_mipi_converter_optimization; | |
| bool use_default_clock_table; | |
| bool force_bios_enable_lttpr; | |
| uint8_t force_bios_fixed_vs; | |
| int sdpif_request_limit_words_per_umc; | |
| bool dc_mode_clk_limit_support; | |
| bool EnableMinDispClkODM; | |
| bool enable_auto_dpm_test_logs; | |
| unsigned int disable_ips; | |
| unsigned int disable_ips_in_vpb; | |
| bool usb4_bw_alloc_support; | |
| bool allow_0_dtb_clk; | |
| bool use_assr_psp_message; | |
| bool support_edp0_on_dp1; | |
| unsigned int enable_fpo_flicker_detection; | |
| bool disable_hbr_audio_dp2; | |
| bool consolidated_dpia_dp_lt; | |
| }; | |
| enum visual_confirm { | |
| VISUAL_CONFIRM_DISABLE = 0, | |
| VISUAL_CONFIRM_SURFACE = 1, | |
| VISUAL_CONFIRM_HDR = 2, | |
| VISUAL_CONFIRM_MPCTREE = 4, | |
| VISUAL_CONFIRM_PSR = 5, | |
| VISUAL_CONFIRM_SWAPCHAIN = 6, | |
| VISUAL_CONFIRM_FAMS = 7, | |
| VISUAL_CONFIRM_SWIZZLE = 9, | |
| VISUAL_CONFIRM_REPLAY = 12, | |
| VISUAL_CONFIRM_SUBVP = 14, | |
| VISUAL_CONFIRM_MCLK_SWITCH = 16, | |
| VISUAL_CONFIRM_FAMS2 = 19, | |
| VISUAL_CONFIRM_HW_CURSOR = 20, | |
| }; | |
| enum dc_psr_power_opts { | |
| psr_power_opt_invalid = 0x0, | |
| psr_power_opt_smu_opt_static_screen = 0x1, | |
| psr_power_opt_z10_static_screen = 0x10, | |
| psr_power_opt_ds_disable_allow = 0x100, | |
| }; | |
| enum dml_hostvm_override_opts { | |
| DML_HOSTVM_NO_OVERRIDE = 0x0, | |
| DML_HOSTVM_OVERRIDE_FALSE = 0x1, | |
| DML_HOSTVM_OVERRIDE_TRUE = 0x2, | |
| }; | |
| enum dc_replay_power_opts { | |
| replay_power_opt_invalid = 0x0, | |
| replay_power_opt_smu_opt_static_screen = 0x1, | |
| replay_power_opt_z10_static_screen = 0x10, | |
| }; | |
| enum dcc_option { | |
| DCC_ENABLE = 0, | |
| DCC_DISABLE = 1, | |
| DCC_HALF_REQ_DISALBE = 2, | |
| }; | |
| enum in_game_fams_config { | |
| INGAME_FAMS_SINGLE_DISP_ENABLE, // enable in-game fams | |
| INGAME_FAMS_DISABLE, // disable in-game fams | |
| INGAME_FAMS_MULTI_DISP_ENABLE, //enable in-game fams for multi-display | |
| INGAME_FAMS_MULTI_DISP_CLAMPED_ONLY, //enable in-game fams for multi-display only for clamped RR strategies | |
| }; | |
| /** | |
| * enum pipe_split_policy - Pipe split strategy supported by DCN | |
| * | |
| * This enum is used to define the pipe split policy supported by DCN. By | |
| * default, DC favors MPC_SPLIT_DYNAMIC. | |
| */ | |
| enum pipe_split_policy { | |
| /** | |
| * @MPC_SPLIT_DYNAMIC: DC will automatically decide how to split the | |
| * pipe in order to bring the best trade-off between performance and | |
| * power consumption. This is the recommended option. | |
| */ | |
| MPC_SPLIT_DYNAMIC = 0, | |
| /** | |
| * @MPC_SPLIT_AVOID: Avoid pipe split, which means that DC will not | |
| * try any sort of split optimization. | |
| */ | |
| MPC_SPLIT_AVOID = 1, | |
| /** | |
| * @MPC_SPLIT_AVOID_MULT_DISP: With this option, DC will only try to | |
| * optimize the pipe utilization when using a single display; if the | |
| * user connects to a second display, DC will avoid pipe split. | |
| */ | |
| MPC_SPLIT_AVOID_MULT_DISP = 2, | |
| }; | |
| enum wm_report_mode { | |
| WM_REPORT_DEFAULT = 0, | |
| WM_REPORT_OVERRIDE = 1, | |
| }; | |
| enum dtm_pstate{ | |
| dtm_level_p0 = 0,/*highest voltage*/ | |
| dtm_level_p1, | |
| dtm_level_p2, | |
| dtm_level_p3, | |
| dtm_level_p4,/*when active_display_count = 0*/ | |
| }; | |
| enum dcn_pwr_state { | |
| DCN_PWR_STATE_UNKNOWN = -1, | |
| DCN_PWR_STATE_MISSION_MODE = 0, | |
| DCN_PWR_STATE_LOW_POWER = 3, | |
| }; | |
| enum dcn_zstate_support_state { | |
| DCN_ZSTATE_SUPPORT_UNKNOWN, | |
| DCN_ZSTATE_SUPPORT_ALLOW, | |
| DCN_ZSTATE_SUPPORT_ALLOW_Z8_ONLY, | |
| DCN_ZSTATE_SUPPORT_ALLOW_Z8_Z10_ONLY, | |
| DCN_ZSTATE_SUPPORT_ALLOW_Z10_ONLY, | |
| DCN_ZSTATE_SUPPORT_DISALLOW, | |
| }; | |
| /* | |
| * struct dc_clocks - DC pipe clocks | |
| * | |
| * For any clocks that may differ per pipe only the max is stored in this | |
| * structure | |
| */ | |
| struct dc_clocks { | |
| int dispclk_khz; | |
| int actual_dispclk_khz; | |
| int dppclk_khz; | |
| int actual_dppclk_khz; | |
| int disp_dpp_voltage_level_khz; | |
| int dcfclk_khz; | |
| int socclk_khz; | |
| int dcfclk_deep_sleep_khz; | |
| int fclk_khz; | |
| int phyclk_khz; | |
| int dramclk_khz; | |
| bool p_state_change_support; | |
| enum dcn_zstate_support_state zstate_support; | |
| bool dtbclk_en; | |
| int ref_dtbclk_khz; | |
| bool fclk_p_state_change_support; | |
| enum dcn_pwr_state pwr_state; | |
| /* | |
| * Elements below are not compared for the purposes of | |
| * optimization required | |
| */ | |
| bool prev_p_state_change_support; | |
| bool fclk_prev_p_state_change_support; | |
| int num_ways; | |
| int host_router_bw_kbps[MAX_HOST_ROUTERS_NUM]; | |
| /* | |
| * @fw_based_mclk_switching | |
| * | |
| * DC has a mechanism that leverage the variable refresh rate to switch | |
| * memory clock in cases that we have a large latency to achieve the | |
| * memory clock change and a short vblank window. DC has some | |
| * requirements to enable this feature, and this field describes if the | |
| * system support or not such a feature. | |
| */ | |
| bool fw_based_mclk_switching; | |
| bool fw_based_mclk_switching_shut_down; | |
| int prev_num_ways; | |
| enum dtm_pstate dtm_level; | |
| int max_supported_dppclk_khz; | |
| int max_supported_dispclk_khz; | |
| int bw_dppclk_khz; /*a copy of dppclk_khz*/ | |
| int bw_dispclk_khz; | |
| int idle_dramclk_khz; | |
| int idle_fclk_khz; | |
| }; | |
| struct dc_bw_validation_profile { | |
| bool enable; | |
| unsigned long long total_ticks; | |
| unsigned long long voltage_level_ticks; | |
| unsigned long long watermark_ticks; | |
| unsigned long long rq_dlg_ticks; | |
| unsigned long long total_count; | |
| unsigned long long skip_fast_count; | |
| unsigned long long skip_pass_count; | |
| unsigned long long skip_fail_count; | |
| }; | |
| #define BW_VAL_TRACE_SETUP() \ | |
| unsigned long long end_tick = 0; \ | |
| unsigned long long voltage_level_tick = 0; \ | |
| unsigned long long watermark_tick = 0; \ | |
| unsigned long long start_tick = dc->debug.bw_val_profile.enable ? \ | |
| dm_get_timestamp(dc->ctx) : 0 | |
| #define BW_VAL_TRACE_COUNT() \ | |
| if (dc->debug.bw_val_profile.enable) \ | |
| dc->debug.bw_val_profile.total_count++ | |
| #define BW_VAL_TRACE_SKIP(status) \ | |
| if (dc->debug.bw_val_profile.enable) { \ | |
| if (!voltage_level_tick) \ | |
| voltage_level_tick = dm_get_timestamp(dc->ctx); \ | |
| dc->debug.bw_val_profile.skip_ ## status ## _count++; \ | |
| } | |
| #define BW_VAL_TRACE_END_VOLTAGE_LEVEL() \ | |
| if (dc->debug.bw_val_profile.enable) \ | |
| voltage_level_tick = dm_get_timestamp(dc->ctx) | |
| #define BW_VAL_TRACE_END_WATERMARKS() \ | |
| if (dc->debug.bw_val_profile.enable) \ | |
| watermark_tick = dm_get_timestamp(dc->ctx) | |
| #define BW_VAL_TRACE_FINISH() \ | |
| if (dc->debug.bw_val_profile.enable) { \ | |
| end_tick = dm_get_timestamp(dc->ctx); \ | |
| dc->debug.bw_val_profile.total_ticks += end_tick - start_tick; \ | |
| dc->debug.bw_val_profile.voltage_level_ticks += voltage_level_tick - start_tick; \ | |
| if (watermark_tick) { \ | |
| dc->debug.bw_val_profile.watermark_ticks += watermark_tick - voltage_level_tick; \ | |
| dc->debug.bw_val_profile.rq_dlg_ticks += end_tick - watermark_tick; \ | |
| } \ | |
| } | |
| union mem_low_power_enable_options { | |
| struct { | |
| bool vga: 1; | |
| bool i2c: 1; | |
| bool dmcu: 1; | |
| bool dscl: 1; | |
| bool cm: 1; | |
| bool mpc: 1; | |
| bool optc: 1; | |
| bool vpg: 1; | |
| bool afmt: 1; | |
| } bits; | |
| uint32_t u32All; | |
| }; | |
| union root_clock_optimization_options { | |
| struct { | |
| bool dpp: 1; | |
| bool dsc: 1; | |
| bool hdmistream: 1; | |
| bool hdmichar: 1; | |
| bool dpstream: 1; | |
| bool symclk32_se: 1; | |
| bool symclk32_le: 1; | |
| bool symclk_fe: 1; | |
| bool physymclk: 1; | |
| bool dpiasymclk: 1; | |
| uint32_t reserved: 22; | |
| } bits; | |
| uint32_t u32All; | |
| }; | |
| union fine_grain_clock_gating_enable_options { | |
| struct { | |
| bool dccg_global_fgcg_rep : 1; /* Global fine grain clock gating of repeaters */ | |
| bool dchub : 1; /* Display controller hub */ | |
| bool dchubbub : 1; | |
| bool dpp : 1; /* Display pipes and planes */ | |
| bool opp : 1; /* Output pixel processing */ | |
| bool optc : 1; /* Output pipe timing combiner */ | |
| bool dio : 1; /* Display output */ | |
| bool dwb : 1; /* Display writeback */ | |
| bool mmhubbub : 1; /* Multimedia hub */ | |
| bool dmu : 1; /* Display core management unit */ | |
| bool az : 1; /* Azalia */ | |
| bool dchvm : 1; | |
| bool dsc : 1; /* Display stream compression */ | |
| uint32_t reserved : 19; | |
| } bits; | |
| uint32_t u32All; | |
| }; | |
| enum pg_hw_pipe_resources { | |
| PG_HUBP = 0, | |
| PG_DPP, | |
| PG_DSC, | |
| PG_MPCC, | |
| PG_OPP, | |
| PG_OPTC, | |
| PG_DPSTREAM, | |
| PG_HDMISTREAM, | |
| PG_PHYSYMCLK, | |
| PG_HW_PIPE_RESOURCES_NUM_ELEMENT | |
| }; | |
| enum pg_hw_resources { | |
| PG_DCCG = 0, | |
| PG_DCIO, | |
| PG_DIO, | |
| PG_DCHUBBUB, | |
| PG_DCHVM, | |
| PG_DWB, | |
| PG_HPO, | |
| PG_HW_RESOURCES_NUM_ELEMENT | |
| }; | |
| struct pg_block_update { | |
| bool pg_pipe_res_update[PG_HW_PIPE_RESOURCES_NUM_ELEMENT][MAX_PIPES]; | |
| bool pg_res_update[PG_HW_RESOURCES_NUM_ELEMENT]; | |
| }; | |
| union dpia_debug_options { | |
| struct { | |
| uint32_t disable_dpia:1; /* bit 0 */ | |
| uint32_t force_non_lttpr:1; /* bit 1 */ | |
| uint32_t extend_aux_rd_interval:1; /* bit 2 */ | |
| uint32_t disable_mst_dsc_work_around:1; /* bit 3 */ | |
| uint32_t enable_force_tbt3_work_around:1; /* bit 4 */ | |
| uint32_t disable_usb4_pm_support:1; /* bit 5 */ | |
| uint32_t enable_consolidated_dpia_dp_lt:1; /* bit 6 */ | |
| uint32_t reserved:25; | |
| } bits; | |
| uint32_t raw; | |
| }; | |
| /* AUX wake work around options | |
| * 0: enable/disable work around | |
| * 1: use default timeout LINK_AUX_WAKE_TIMEOUT_MS | |
| * 15-2: reserved | |
| * 31-16: timeout in ms | |
| */ | |
| union aux_wake_wa_options { | |
| struct { | |
| uint32_t enable_wa : 1; | |
| uint32_t use_default_timeout : 1; | |
| uint32_t rsvd: 14; | |
| uint32_t timeout_ms : 16; | |
| } bits; | |
| uint32_t raw; | |
| }; | |
| struct dc_debug_data { | |
| uint32_t ltFailCount; | |
| uint32_t i2cErrorCount; | |
| uint32_t auxErrorCount; | |
| }; | |
| struct dc_phy_addr_space_config { | |
| struct { | |
| uint64_t start_addr; | |
| uint64_t end_addr; | |
| uint64_t fb_top; | |
| uint64_t fb_offset; | |
| uint64_t fb_base; | |
| uint64_t agp_top; | |
| uint64_t agp_bot; | |
| uint64_t agp_base; | |
| } system_aperture; | |
| struct { | |
| uint64_t page_table_start_addr; | |
| uint64_t page_table_end_addr; | |
| uint64_t page_table_base_addr; | |
| bool base_addr_is_mc_addr; | |
| } gart_config; | |
| bool valid; | |
| bool is_hvm_enabled; | |
| uint64_t page_table_default_page_addr; | |
| }; | |
| struct dc_virtual_addr_space_config { | |
| uint64_t page_table_base_addr; | |
| uint64_t page_table_start_addr; | |
| uint64_t page_table_end_addr; | |
| uint32_t page_table_block_size_in_bytes; | |
| uint8_t page_table_depth; // 1 = 1 level, 2 = 2 level, etc. 0 = invalid | |
| }; | |
| struct dc_bounding_box_overrides { | |
| int sr_exit_time_ns; | |
| int sr_enter_plus_exit_time_ns; | |
| int sr_exit_z8_time_ns; | |
| int sr_enter_plus_exit_z8_time_ns; | |
| int urgent_latency_ns; | |
| int percent_of_ideal_drambw; | |
| int dram_clock_change_latency_ns; | |
| int dummy_clock_change_latency_ns; | |
| int fclk_clock_change_latency_ns; | |
| /* This forces a hard min on the DCFCLK we use | |
| * for DML. Unlike the debug option for forcing | |
| * DCFCLK, this override affects watermark calculations | |
| */ | |
| int min_dcfclk_mhz; | |
| }; | |
| struct dc_state; | |
| struct resource_pool; | |
| struct dce_hwseq; | |
| struct link_service; | |
| /* | |
| * struct dc_debug_options - DC debug struct | |
| * | |
| * This struct provides a simple mechanism for developers to change some | |
| * configurations, enable/disable features, and activate extra debug options. | |
| * This can be very handy to narrow down whether some specific feature is | |
| * causing an issue or not. | |
| */ | |
| struct dc_debug_options { | |
| bool native422_support; | |
| bool disable_dsc; | |
| enum visual_confirm visual_confirm; | |
| int visual_confirm_rect_height; | |
| bool sanity_checks; | |
| bool max_disp_clk; | |
| bool surface_trace; | |
| bool timing_trace; | |
| bool clock_trace; | |
| bool validation_trace; | |
| bool bandwidth_calcs_trace; | |
| int max_downscale_src_width; | |
| /* stutter efficiency related */ | |
| bool disable_stutter; | |
| bool use_max_lb; | |
| enum dcc_option disable_dcc; | |
| /* | |
| * @pipe_split_policy: Define which pipe split policy is used by the | |
| * display core. | |
| */ | |
| enum pipe_split_policy pipe_split_policy; | |
| bool force_single_disp_pipe_split; | |
| bool voltage_align_fclk; | |
| bool disable_min_fclk; | |
| bool disable_dfs_bypass; | |
| bool disable_dpp_power_gate; | |
| bool disable_hubp_power_gate; | |
| bool disable_dsc_power_gate; | |
| bool disable_optc_power_gate; | |
| bool disable_hpo_power_gate; | |
| int dsc_min_slice_height_override; | |
| int dsc_bpp_increment_div; | |
| bool disable_pplib_wm_range; | |
| enum wm_report_mode pplib_wm_report_mode; | |
| unsigned int min_disp_clk_khz; | |
| unsigned int min_dpp_clk_khz; | |
| unsigned int min_dram_clk_khz; | |
| int sr_exit_time_dpm0_ns; | |
| int sr_enter_plus_exit_time_dpm0_ns; | |
| int sr_exit_time_ns; | |
| int sr_enter_plus_exit_time_ns; | |
| int sr_exit_z8_time_ns; | |
| int sr_enter_plus_exit_z8_time_ns; | |
| int urgent_latency_ns; | |
| uint32_t underflow_assert_delay_us; | |
| int percent_of_ideal_drambw; | |
| int dram_clock_change_latency_ns; | |
| bool optimized_watermark; | |
| int always_scale; | |
| bool disable_pplib_clock_request; | |
| bool disable_clock_gate; | |
| bool disable_mem_low_power; | |
| bool pstate_enabled; | |
| bool disable_dmcu; | |
| bool force_abm_enable; | |
| bool disable_stereo_support; | |
| bool vsr_support; | |
| bool performance_trace; | |
| bool az_endpoint_mute_only; | |
| bool always_use_regamma; | |
| bool recovery_enabled; | |
| bool avoid_vbios_exec_table; | |
| bool scl_reset_length10; | |
| bool hdmi20_disable; | |
| bool skip_detection_link_training; | |
| uint32_t edid_read_retry_times; | |
| unsigned int force_odm_combine; //bit vector based on otg inst | |
| unsigned int seamless_boot_odm_combine; | |
| unsigned int force_odm_combine_4to1; //bit vector based on otg inst | |
| int minimum_z8_residency_time; | |
| int minimum_z10_residency_time; | |
| bool disable_z9_mpc; | |
| unsigned int force_fclk_khz; | |
| bool enable_tri_buf; | |
| bool ips_disallow_entry; | |
| bool dmub_offload_enabled; | |
| bool dmcub_emulation; | |
| bool disable_idle_power_optimizations; | |
| unsigned int mall_size_override; | |
| unsigned int mall_additional_timer_percent; | |
| bool mall_error_as_fatal; | |
| bool dmub_command_table; /* for testing only */ | |
| struct dc_bw_validation_profile bw_val_profile; | |
| bool disable_fec; | |
| bool disable_48mhz_pwrdwn; | |
| /* This forces a hard min on the DCFCLK requested to SMU/PP | |
| * watermarks are not affected. | |
| */ | |
| unsigned int force_min_dcfclk_mhz; | |
| int dwb_fi_phase; | |
| bool disable_timing_sync; | |
| bool cm_in_bypass; | |
| int force_clock_mode;/*every mode change.*/ | |
| bool disable_dram_clock_change_vactive_support; | |
| bool validate_dml_output; | |
| bool enable_dmcub_surface_flip; | |
| bool usbc_combo_phy_reset_wa; | |
| bool enable_dram_clock_change_one_display_vactive; | |
| /* TODO - remove once tested */ | |
| bool legacy_dp2_lt; | |
| bool set_mst_en_for_sst; | |
| bool disable_uhbr; | |
| bool force_dp2_lt_fallback_method; | |
| bool ignore_cable_id; | |
| union mem_low_power_enable_options enable_mem_low_power; | |
| union root_clock_optimization_options root_clock_optimization; | |
| union fine_grain_clock_gating_enable_options enable_fine_grain_clock_gating; | |
| bool hpo_optimization; | |
| bool force_vblank_alignment; | |
| /* Enable dmub aux for legacy ddc */ | |
| bool enable_dmub_aux_for_legacy_ddc; | |
| bool disable_fams; | |
| enum in_game_fams_config disable_fams_gaming; | |
| /* FEC/PSR1 sequence enable delay in 100us */ | |
| uint8_t fec_enable_delay_in100us; | |
| bool enable_driver_sequence_debug; | |
| enum det_size crb_alloc_policy; | |
| int crb_alloc_policy_min_disp_count; | |
| bool disable_z10; | |
| bool enable_z9_disable_interface; | |
| bool psr_skip_crtc_disable; | |
| uint32_t ips_skip_crtc_disable_mask; | |
| union dpia_debug_options dpia_debug; | |
| bool disable_fixed_vs_aux_timeout_wa; | |
| uint32_t fixed_vs_aux_delay_config_wa; | |
| bool force_disable_subvp; | |
| bool force_subvp_mclk_switch; | |
| bool allow_sw_cursor_fallback; | |
| unsigned int force_subvp_num_ways; | |
| unsigned int force_mall_ss_num_ways; | |
| bool alloc_extra_way_for_cursor; | |
| uint32_t subvp_extra_lines; | |
| bool force_usr_allow; | |
| /* uses value at boot and disables switch */ | |
| bool disable_dtb_ref_clk_switch; | |
| bool extended_blank_optimization; | |
| union aux_wake_wa_options aux_wake_wa; | |
| uint32_t mst_start_top_delay; | |
| uint8_t psr_power_use_phy_fsm; | |
| enum dml_hostvm_override_opts dml_hostvm_override; | |
| bool dml_disallow_alternate_prefetch_modes; | |
| bool use_legacy_soc_bb_mechanism; | |
| bool exit_idle_opt_for_cursor_updates; | |
| bool using_dml2; | |
| bool enable_single_display_2to1_odm_policy; | |
| bool enable_double_buffered_dsc_pg_support; | |
| bool enable_dp_dig_pixel_rate_div_policy; | |
| bool using_dml21; | |
| enum lttpr_mode lttpr_mode_override; | |
| unsigned int dsc_delay_factor_wa_x1000; | |
| unsigned int min_prefetch_in_strobe_ns; | |
| bool disable_unbounded_requesting; | |
| bool dig_fifo_off_in_blank; | |
| bool override_dispclk_programming; | |
| bool otg_crc_db; | |
| bool disallow_dispclk_dppclk_ds; | |
| bool disable_fpo_optimizations; | |
| bool support_eDP1_5; | |
| uint32_t fpo_vactive_margin_us; | |
| bool disable_fpo_vactive; | |
| bool disable_boot_optimizations; | |
| bool override_odm_optimization; | |
| bool minimize_dispclk_using_odm; | |
| bool disable_subvp_high_refresh; | |
| bool disable_dp_plus_plus_wa; | |
| uint32_t fpo_vactive_min_active_margin_us; | |
| uint32_t fpo_vactive_max_blank_us; | |
| bool enable_hpo_pg_support; | |
| bool enable_legacy_fast_update; | |
| bool disable_dc_mode_overwrite; | |
| bool replay_skip_crtc_disabled; | |
| bool ignore_pg;/*do nothing, let pmfw control it*/ | |
| bool psp_disabled_wa; | |
| unsigned int ips2_eval_delay_us; | |
| unsigned int ips2_entry_delay_us; | |
| bool optimize_ips_handshake; | |
| bool disable_dmub_reallow_idle; | |
| bool disable_timeout; | |
| bool disable_extblankadj; | |
| bool enable_idle_reg_checks; | |
| unsigned int static_screen_wait_frames; | |
| uint32_t pwm_freq; | |
| bool force_chroma_subsampling_1tap; | |
| unsigned int dcc_meta_propagation_delay_us; | |
| bool disable_422_left_edge_pixel; | |
| bool dml21_force_pstate_method; | |
| uint32_t dml21_force_pstate_method_values[MAX_PIPES]; | |
| uint32_t dml21_disable_pstate_method_mask; | |
| union dmub_fams2_global_feature_config fams2_config; | |
| bool enable_legacy_clock_update; | |
| unsigned int force_cositing; | |
| unsigned int disable_spl; | |
| unsigned int force_easf; | |
| unsigned int force_sharpness; | |
| unsigned int force_sharpness_level; | |
| unsigned int force_lls; | |
| bool notify_dpia_hr_bw; | |
| bool enable_ips_visual_confirm; | |
| unsigned int sharpen_policy; | |
| unsigned int scale_to_sharpness_policy; | |
| bool skip_full_updated_if_possible; | |
| }; | |
| /* Generic structure that can be used to query properties of DC. More fields | |
| * can be added as required. | |
| */ | |
| struct dc_current_properties { | |
| unsigned int cursor_size_limit; | |
| }; | |
| enum frame_buffer_mode { | |
| FRAME_BUFFER_MODE_LOCAL_ONLY = 0, | |
| FRAME_BUFFER_MODE_ZFB_ONLY, | |
| FRAME_BUFFER_MODE_MIXED_ZFB_AND_LOCAL, | |
| } ; | |
| struct dchub_init_data { | |
| int64_t zfb_phys_addr_base; | |
| int64_t zfb_mc_base_addr; | |
| uint64_t zfb_size_in_byte; | |
| enum frame_buffer_mode fb_mode; | |
| bool dchub_initialzied; | |
| bool dchub_info_valid; | |
| }; | |
| struct dml2_soc_bb; | |
| struct dc_init_data { | |
| struct hw_asic_id asic_id; | |
| void *driver; /* ctx */ | |
| struct cgs_device *cgs_device; | |
| struct dc_bounding_box_overrides bb_overrides; | |
| int num_virtual_links; | |
| /* | |
| * If 'vbios_override' not NULL, it will be called instead | |
| * of the real VBIOS. Intended use is Diagnostics on FPGA. | |
| */ | |
| struct dc_bios *vbios_override; | |
| enum dce_environment dce_environment; | |
| struct dmub_offload_funcs *dmub_if; | |
| struct dc_reg_helper_state *dmub_offload; | |
| struct dc_config flags; | |
| uint64_t log_mask; | |
| struct dpcd_vendor_signature vendor_signature; | |
| bool force_smu_not_present; | |
| /* | |
| * IP offset for run time initializaion of register addresses | |
| * | |
| * DCN3.5+ will fail dc_create() if these fields are null for them. They are | |
| * applicable starting with DCN32/321 and are not used for ASICs upstreamed | |
| * before them. | |
| */ | |
| uint32_t *dcn_reg_offsets; | |
| uint32_t *nbio_reg_offsets; | |
| uint32_t *clk_reg_offsets; | |
| struct dml2_soc_bb *bb_from_dmub; | |
| }; | |
| struct dc_callback_init { | |
| struct cp_psp cp_psp; | |
| }; | |
| struct dc *dc_create(const struct dc_init_data *init_params); | |
| void dc_hardware_init(struct dc *dc); | |
| int dc_get_vmid_use_vector(struct dc *dc); | |
| void dc_setup_vm_context(struct dc *dc, struct dc_virtual_addr_space_config *va_config, int vmid); | |
| /* Returns the number of vmids supported */ | |
| int dc_setup_system_context(struct dc *dc, struct dc_phy_addr_space_config *pa_config); | |
| void dc_init_callbacks(struct dc *dc, | |
| const struct dc_callback_init *init_params); | |
| void dc_deinit_callbacks(struct dc *dc); | |
| void dc_destroy(struct dc **dc); | |
| /* Surface Interfaces */ | |
| enum { | |
| TRANSFER_FUNC_POINTS = 1025 | |
| }; | |
| struct dc_hdr_static_metadata { | |
| /* display chromaticities and white point in units of 0.00001 */ | |
| unsigned int chromaticity_green_x; | |
| unsigned int chromaticity_green_y; | |
| unsigned int chromaticity_blue_x; | |
| unsigned int chromaticity_blue_y; | |
| unsigned int chromaticity_red_x; | |
| unsigned int chromaticity_red_y; | |
| unsigned int chromaticity_white_point_x; | |
| unsigned int chromaticity_white_point_y; | |
| uint32_t min_luminance; | |
| uint32_t max_luminance; | |
| uint32_t maximum_content_light_level; | |
| uint32_t maximum_frame_average_light_level; | |
| }; | |
| enum dc_transfer_func_type { | |
| TF_TYPE_PREDEFINED, | |
| TF_TYPE_DISTRIBUTED_POINTS, | |
| TF_TYPE_BYPASS, | |
| TF_TYPE_HWPWL | |
| }; | |
| struct dc_transfer_func_distributed_points { | |
| struct fixed31_32 red[TRANSFER_FUNC_POINTS]; | |
| struct fixed31_32 green[TRANSFER_FUNC_POINTS]; | |
| struct fixed31_32 blue[TRANSFER_FUNC_POINTS]; | |
| uint16_t end_exponent; | |
| uint16_t x_point_at_y1_red; | |
| uint16_t x_point_at_y1_green; | |
| uint16_t x_point_at_y1_blue; | |
| }; | |
| enum dc_transfer_func_predefined { | |
| TRANSFER_FUNCTION_SRGB, | |
| TRANSFER_FUNCTION_BT709, | |
| TRANSFER_FUNCTION_PQ, | |
| TRANSFER_FUNCTION_LINEAR, | |
| TRANSFER_FUNCTION_UNITY, | |
| TRANSFER_FUNCTION_HLG, | |
| TRANSFER_FUNCTION_HLG12, | |
| TRANSFER_FUNCTION_GAMMA22, | |
| TRANSFER_FUNCTION_GAMMA24, | |
| TRANSFER_FUNCTION_GAMMA26 | |
| }; | |
| struct dc_transfer_func { | |
| struct kref refcount; | |
| enum dc_transfer_func_type type; | |
| enum dc_transfer_func_predefined tf; | |
| /* FP16 1.0 reference level in nits, default is 80 nits, only for PQ*/ | |
| uint32_t sdr_ref_white_level; | |
| union { | |
| struct pwl_params pwl; | |
| struct dc_transfer_func_distributed_points tf_pts; | |
| }; | |
| }; | |
| union dc_3dlut_state { | |
| struct { | |
| uint32_t initialized:1; /*if 3dlut is went through color module for initialization */ | |
| uint32_t rmu_idx_valid:1; /*if mux settings are valid*/ | |
| uint32_t rmu_mux_num:3; /*index of mux to use*/ | |
| uint32_t mpc_rmu0_mux:4; /*select mpcc on mux, one of the following : mpcc0, mpcc1, mpcc2, mpcc3*/ | |
| uint32_t mpc_rmu1_mux:4; | |
| uint32_t mpc_rmu2_mux:4; | |
| uint32_t reserved:15; | |
| } bits; | |
| uint32_t raw; | |
| }; | |
| struct dc_3dlut { | |
| struct kref refcount; | |
| struct tetrahedral_params lut_3d; | |
| struct fixed31_32 hdr_multiplier; | |
| union dc_3dlut_state state; | |
| }; | |
| /* | |
| * This structure is filled in by dc_surface_get_status and contains | |
| * the last requested address and the currently active address so the called | |
| * can determine if there are any outstanding flips | |
| */ | |
| struct dc_plane_status { | |
| struct dc_plane_address requested_address; | |
| struct dc_plane_address current_address; | |
| bool is_flip_pending; | |
| bool is_right_eye; | |
| }; | |
| union surface_update_flags { | |
| struct { | |
| uint32_t addr_update:1; | |
| /* Medium updates */ | |
| uint32_t dcc_change:1; | |
| uint32_t color_space_change:1; | |
| uint32_t horizontal_mirror_change:1; | |
| uint32_t per_pixel_alpha_change:1; | |
| uint32_t global_alpha_change:1; | |
| uint32_t hdr_mult:1; | |
| uint32_t rotation_change:1; | |
| uint32_t swizzle_change:1; | |
| uint32_t scaling_change:1; | |
| uint32_t clip_size_change: 1; | |
| uint32_t position_change:1; | |
| uint32_t in_transfer_func_change:1; | |
| uint32_t input_csc_change:1; | |
| uint32_t coeff_reduction_change:1; | |
| uint32_t output_tf_change:1; | |
| uint32_t pixel_format_change:1; | |
| uint32_t plane_size_change:1; | |
| uint32_t gamut_remap_change:1; | |
| /* Full updates */ | |
| uint32_t new_plane:1; | |
| uint32_t bpp_change:1; | |
| uint32_t gamma_change:1; | |
| uint32_t bandwidth_change:1; | |
| uint32_t clock_change:1; | |
| uint32_t stereo_format_change:1; | |
| uint32_t lut_3d:1; | |
| uint32_t tmz_changed:1; | |
| uint32_t mcm_transfer_function_enable_change:1; /* disable or enable MCM transfer func */ | |
| uint32_t full_update:1; | |
| uint32_t sdr_white_level_nits:1; | |
| } bits; | |
| uint32_t raw; | |
| }; | |
| #define DC_REMOVE_PLANE_POINTERS 1 | |
| struct dc_plane_state { | |
| struct dc_plane_address address; | |
| struct dc_plane_flip_time time; | |
| bool triplebuffer_flips; | |
| struct scaling_taps scaling_quality; | |
| struct rect src_rect; | |
| struct rect dst_rect; | |
| struct rect clip_rect; | |
| struct plane_size plane_size; | |
| union dc_tiling_info tiling_info; | |
| struct dc_plane_dcc_param dcc; | |
| struct dc_gamma gamma_correction; | |
| struct dc_transfer_func in_transfer_func; | |
| struct dc_bias_and_scale bias_and_scale; | |
| struct dc_csc_transform input_csc_color_matrix; | |
| struct fixed31_32 coeff_reduction_factor; | |
| struct fixed31_32 hdr_mult; | |
| struct colorspace_transform gamut_remap_matrix; | |
| // TODO: No longer used, remove | |
| struct dc_hdr_static_metadata hdr_static_ctx; | |
| enum dc_color_space color_space; | |
| struct dc_3dlut lut3d_func; | |
| struct dc_transfer_func in_shaper_func; | |
| struct dc_transfer_func blend_tf; | |
| struct dc_transfer_func *gamcor_tf; | |
| enum surface_pixel_format format; | |
| enum dc_rotation_angle rotation; | |
| enum plane_stereo_format stereo_format; | |
| bool is_tiling_rotated; | |
| bool per_pixel_alpha; | |
| bool pre_multiplied_alpha; | |
| bool global_alpha; | |
| int global_alpha_value; | |
| bool visible; | |
| bool flip_immediate; | |
| bool horizontal_mirror; | |
| int layer_index; | |
| union surface_update_flags update_flags; | |
| bool flip_int_enabled; | |
| bool skip_manual_trigger; | |
| /* private to DC core */ | |
| struct dc_plane_status status; | |
| struct dc_context *ctx; | |
| /* HACK: Workaround for forcing full reprogramming under some conditions */ | |
| bool force_full_update; | |
| bool is_phantom; // TODO: Change mall_stream_config into mall_plane_config instead | |
| /* private to dc_surface.c */ | |
| enum dc_irq_source irq_source; | |
| struct kref refcount; | |
| struct tg_color visual_confirm_color; | |
| bool is_statically_allocated; | |
| enum chroma_cositing cositing; | |
| enum dc_cm2_shaper_3dlut_setting mcm_shaper_3dlut_setting; | |
| bool mcm_lut1d_enable; | |
| struct dc_cm2_func_luts mcm_luts; | |
| bool lut_bank_a; | |
| enum mpcc_movable_cm_location mcm_location; | |
| struct dc_csc_transform cursor_csc_color_matrix; | |
| bool adaptive_sharpness_en; | |
| int sharpness_level; | |
| enum linear_light_scaling linear_light_scaling; | |
| unsigned int sdr_white_level_nits; | |
| }; | |
| struct dc_plane_info { | |
| struct plane_size plane_size; | |
| union dc_tiling_info tiling_info; | |
| struct dc_plane_dcc_param dcc; | |
| enum surface_pixel_format format; | |
| enum dc_rotation_angle rotation; | |
| enum plane_stereo_format stereo_format; | |
| enum dc_color_space color_space; | |
| bool horizontal_mirror; | |
| bool visible; | |
| bool per_pixel_alpha; | |
| bool pre_multiplied_alpha; | |
| bool global_alpha; | |
| int global_alpha_value; | |
| bool input_csc_enabled; | |
| int layer_index; | |
| enum chroma_cositing cositing; | |
| }; | |
| #include "dc_stream.h" | |
| struct dc_scratch_space { | |
| /* used to temporarily backup plane states of a stream during | |
| * dc update. The reason is that plane states are overwritten | |
| * with surface updates in dc update. Once they are overwritten | |
| * current state is no longer valid. We want to temporarily | |
| * store current value in plane states so we can still recover | |
| * a valid current state during dc update. | |
| */ | |
| struct dc_plane_state plane_states[MAX_SURFACE_NUM]; | |
| struct dc_stream_state stream_state; | |
| }; | |
| struct dc { | |
| struct dc_debug_options debug; | |
| struct dc_versions versions; | |
| struct dc_caps caps; | |
| struct dc_cap_funcs cap_funcs; | |
| struct dc_config config; | |
| struct dc_bounding_box_overrides bb_overrides; | |
| struct dc_bug_wa work_arounds; | |
| struct dc_context *ctx; | |
| struct dc_phy_addr_space_config vm_pa_config; | |
| uint8_t link_count; | |
| struct dc_link *links[MAX_LINKS]; | |
| struct link_service *link_srv; | |
| struct dc_state *current_state; | |
| struct resource_pool *res_pool; | |
| struct clk_mgr *clk_mgr; | |
| /* Display Engine Clock levels */ | |
| struct dm_pp_clock_levels sclk_lvls; | |
| /* Inputs into BW and WM calculations. */ | |
| struct bw_calcs_dceip *bw_dceip; | |
| struct bw_calcs_vbios *bw_vbios; | |
| struct dcn_soc_bounding_box *dcn_soc; | |
| struct dcn_ip_params *dcn_ip; | |
| struct display_mode_lib dml; | |
| /* HW functions */ | |
| struct hw_sequencer_funcs hwss; | |
| struct dce_hwseq *hwseq; | |
| /* Require to optimize clocks and bandwidth for added/removed planes */ | |
| bool optimized_required; | |
| bool wm_optimized_required; | |
| bool idle_optimizations_allowed; | |
| bool enable_c20_dtm_b0; | |
| /* Require to maintain clocks and bandwidth for UEFI enabled HW */ | |
| /* FBC compressor */ | |
| struct compressor *fbc_compressor; | |
| struct dc_debug_data debug_data; | |
| struct dpcd_vendor_signature vendor_signature; | |
| const char *build_id; | |
| struct vm_helper *vm_helper; | |
| uint32_t *dcn_reg_offsets; | |
| uint32_t *nbio_reg_offsets; | |
| uint32_t *clk_reg_offsets; | |
| /* Scratch memory */ | |
| struct { | |
| struct { | |
| /* | |
| * For matching clock_limits table in driver with table | |
| * from PMFW. | |
| */ | |
| struct _vcs_dpi_voltage_scaling_st clock_limits[DC__VOLTAGE_STATES]; | |
| } update_bw_bounding_box; | |
| struct dc_scratch_space current_state; | |
| struct dc_scratch_space new_state; | |
| struct dc_stream_state temp_stream; // Used so we don't need to allocate stream on the stack | |
| } scratch; | |
| struct dml2_configuration_options dml2_options; | |
| struct dml2_configuration_options dml2_tmp; | |
| enum dc_acpi_cm_power_state power_state; | |
| }; | |
| struct dc_scaling_info { | |
| struct rect src_rect; | |
| struct rect dst_rect; | |
| struct rect clip_rect; | |
| struct scaling_taps scaling_quality; | |
| }; | |
| struct dc_fast_update { | |
| const struct dc_flip_addrs *flip_addr; | |
| const struct dc_gamma *gamma; | |
| const struct colorspace_transform *gamut_remap_matrix; | |
| const struct dc_csc_transform *input_csc_color_matrix; | |
| const struct fixed31_32 *coeff_reduction_factor; | |
| struct dc_transfer_func *out_transfer_func; | |
| struct dc_csc_transform *output_csc_transform; | |
| const struct dc_csc_transform *cursor_csc_color_matrix; | |
| }; | |
| struct dc_surface_update { | |
| struct dc_plane_state *surface; | |
| /* isr safe update parameters. null means no updates */ | |
| const struct dc_flip_addrs *flip_addr; | |
| const struct dc_plane_info *plane_info; | |
| const struct dc_scaling_info *scaling_info; | |
| struct fixed31_32 hdr_mult; | |
| /* following updates require alloc/sleep/spin that is not isr safe, | |
| * null means no updates | |
| */ | |
| const struct dc_gamma *gamma; | |
| const struct dc_transfer_func *in_transfer_func; | |
| const struct dc_csc_transform *input_csc_color_matrix; | |
| const struct fixed31_32 *coeff_reduction_factor; | |
| const struct dc_transfer_func *func_shaper; | |
| const struct dc_3dlut *lut3d_func; | |
| const struct dc_transfer_func *blend_tf; | |
| const struct colorspace_transform *gamut_remap_matrix; | |
| /* | |
| * Color Transformations for pre-blend MCM (Shaper, 3DLUT, 1DLUT) | |
| * | |
| * change cm2_params.component_settings: Full update | |
| * change cm2_params.cm2_luts: Fast update | |
| */ | |
| struct dc_cm2_parameters *cm2_params; | |
| const struct dc_csc_transform *cursor_csc_color_matrix; | |
| unsigned int sdr_white_level_nits; | |
| }; | |
| /* | |
| * Create a new surface with default parameters; | |
| */ | |
| void dc_gamma_retain(struct dc_gamma *dc_gamma); | |
| void dc_gamma_release(struct dc_gamma **dc_gamma); | |
| struct dc_gamma *dc_create_gamma(void); | |
| void dc_transfer_func_retain(struct dc_transfer_func *dc_tf); | |
| void dc_transfer_func_release(struct dc_transfer_func *dc_tf); | |
| struct dc_transfer_func *dc_create_transfer_func(void); | |
| struct dc_3dlut *dc_create_3dlut_func(void); | |
| void dc_3dlut_func_release(struct dc_3dlut *lut); | |
| void dc_3dlut_func_retain(struct dc_3dlut *lut); | |
| void dc_post_update_surfaces_to_stream( | |
| struct dc *dc); | |
| #include "dc_stream.h" | |
| /** | |
| * struct dc_validation_set - Struct to store surface/stream associations for validation | |
| */ | |
| struct dc_validation_set { | |
| /** | |
| * @stream: Stream state properties | |
| */ | |
| struct dc_stream_state *stream; | |
| /** | |
| * @plane_states: Surface state | |
| */ | |
| struct dc_plane_state *plane_states[MAX_SURFACES]; | |
| /** | |
| * @plane_count: Total of active planes | |
| */ | |
| uint8_t plane_count; | |
| }; | |
| bool dc_validate_boot_timing(const struct dc *dc, | |
| const struct dc_sink *sink, | |
| struct dc_crtc_timing *crtc_timing); | |
| enum dc_status dc_validate_plane(struct dc *dc, const struct dc_plane_state *plane_state); | |
| void get_clock_requirements_for_state(struct dc_state *state, struct AsicStateEx *info); | |
| enum dc_status dc_validate_with_context(struct dc *dc, | |
| const struct dc_validation_set set[], | |
| int set_count, | |
| struct dc_state *context, | |
| bool fast_validate); | |
| bool dc_set_generic_gpio_for_stereo(bool enable, | |
| struct gpio_service *gpio_service); | |
| /* | |
| * fast_validate: we return after determining if we can support the new state, | |
| * but before we populate the programming info | |
| */ | |
| enum dc_status dc_validate_global_state( | |
| struct dc *dc, | |
| struct dc_state *new_ctx, | |
| bool fast_validate); | |
| bool dc_acquire_release_mpc_3dlut( | |
| struct dc *dc, bool acquire, | |
| struct dc_stream_state *stream, | |
| struct dc_3dlut **lut, | |
| struct dc_transfer_func **shaper); | |
| bool dc_resource_is_dsc_encoding_supported(const struct dc *dc); | |
| void get_audio_check(struct audio_info *aud_modes, | |
| struct audio_check *aud_chk); | |
| bool fast_nonaddr_updates_exist(struct dc_fast_update *fast_update, int surface_count); | |
| void populate_fast_updates(struct dc_fast_update *fast_update, | |
| struct dc_surface_update *srf_updates, | |
| int surface_count, | |
| struct dc_stream_update *stream_update); | |
| /* | |
| * Set up streams and links associated to drive sinks | |
| * The streams parameter is an absolute set of all active streams. | |
| * | |
| * After this call: | |
| * Phy, Encoder, Timing Generator are programmed and enabled. | |
| * New streams are enabled with blank stream; no memory read. | |
| */ | |
| enum dc_status dc_commit_streams(struct dc *dc, struct dc_commit_streams_params *params); | |
| struct dc_plane_state *dc_get_surface_for_mpcc(struct dc *dc, | |
| struct dc_stream_state *stream, | |
| int mpcc_inst); | |
| uint32_t dc_get_opp_for_plane(struct dc *dc, struct dc_plane_state *plane); | |
| void dc_set_disable_128b_132b_stream_overhead(bool disable); | |
| /* The function returns minimum bandwidth required to drive a given timing | |
| * return - minimum required timing bandwidth in kbps. | |
| */ | |
| uint32_t dc_bandwidth_in_kbps_from_timing( | |
| const struct dc_crtc_timing *timing, | |
| const enum dc_link_encoding_format link_encoding); | |
| /* Link Interfaces */ | |
| /* | |
| * A link contains one or more sinks and their connected status. | |
| * The currently active signal type (HDMI, DP-SST, DP-MST) is also reported. | |
| */ | |
| struct dc_link { | |
| struct dc_sink *remote_sinks[MAX_SINKS_PER_LINK]; | |
| unsigned int sink_count; | |
| struct dc_sink *local_sink; | |
| unsigned int link_index; | |
| enum dc_connection_type type; | |
| enum signal_type connector_signal; | |
| enum dc_irq_source irq_source_hpd; | |
| enum dc_irq_source irq_source_hpd_rx;/* aka DP Short Pulse */ | |
| bool is_hpd_filter_disabled; | |
| bool dp_ss_off; | |
| /** | |
| * @link_state_valid: | |
| * | |
| * If there is no link and local sink, this variable should be set to | |
| * false. Otherwise, it should be set to true; usually, the function | |
| * core_link_enable_stream sets this field to true. | |
| */ | |
| bool link_state_valid; | |
| bool aux_access_disabled; | |
| bool sync_lt_in_progress; | |
| bool skip_stream_reenable; | |
| bool is_internal_display; | |
| /** @todo Rename. Flag an endpoint as having a programmable mapping to a DIG encoder. */ | |
| bool is_dig_mapping_flexible; | |
| bool hpd_status; /* HPD status of link without physical HPD pin. */ | |
| bool is_hpd_pending; /* Indicates a new received hpd */ | |
| /* USB4 DPIA links skip verifying link cap, instead performing the fallback method | |
| * for every link training. This is incompatible with DP LL compliance automation, | |
| * which expects the same link settings to be used every retry on a link loss. | |
| * This flag is used to skip the fallback when link loss occurs during automation. | |
| */ | |
| bool skip_fallback_on_link_loss; | |
| bool edp_sink_present; | |
| struct dp_trace dp_trace; | |
| /* caps is the same as reported_link_cap. link_traing use | |
| * reported_link_cap. Will clean up. TODO | |
| */ | |
| struct dc_link_settings reported_link_cap; | |
| struct dc_link_settings verified_link_cap; | |
| struct dc_link_settings cur_link_settings; | |
| struct dc_lane_settings cur_lane_setting[LANE_COUNT_DP_MAX]; | |
| struct dc_link_settings preferred_link_setting; | |
| /* preferred_training_settings are override values that | |
| * come from DM. DM is responsible for the memory | |
| * management of the override pointers. | |
| */ | |
| struct dc_link_training_overrides preferred_training_settings; | |
| struct dp_audio_test_data audio_test_data; | |
| uint8_t ddc_hw_inst; | |
| uint8_t hpd_src; | |
| uint8_t link_enc_hw_inst; | |
| /* DIG link encoder ID. Used as index in link encoder resource pool. | |
| * For links with fixed mapping to DIG, this is not changed after dc_link | |
| * object creation. | |
| */ | |
| enum engine_id eng_id; | |
| enum engine_id dpia_preferred_eng_id; | |
| bool test_pattern_enabled; | |
| /* Pending/Current test pattern are only used to perform and track | |
| * FIXED_VS retimer test pattern/lane adjustment override state. | |
| * Pending allows link HWSS to differentiate PHY vs non-PHY pattern, | |
| * to perform specific lane adjust overrides before setting certain | |
| * PHY test patterns. In cases when lane adjust and set test pattern | |
| * calls are not performed atomically (i.e. performing link training), | |
| * pending_test_pattern will be invalid or contain a non-PHY test pattern | |
| * and current_test_pattern will contain required context for any future | |
| * set pattern/set lane adjust to transition between override state(s). | |
| * */ | |
| enum dp_test_pattern current_test_pattern; | |
| enum dp_test_pattern pending_test_pattern; | |
| union compliance_test_state compliance_test_state; | |
| void *priv; | |
| struct ddc_service *ddc; | |
| enum dp_panel_mode panel_mode; | |
| bool aux_mode; | |
| /* Private to DC core */ | |
| const struct dc *dc; | |
| struct dc_context *ctx; | |
| struct panel_cntl *panel_cntl; | |
| struct link_encoder *link_enc; | |
| struct graphics_object_id link_id; | |
| /* Endpoint type distinguishes display endpoints which do not have entries | |
| * in the BIOS connector table from those that do. Helps when tracking link | |
| * encoder to display endpoint assignments. | |
| */ | |
| enum display_endpoint_type ep_type; | |
| union ddi_channel_mapping ddi_channel_mapping; | |
| struct connector_device_tag_info device_tag; | |
| struct dpcd_caps dpcd_caps; | |
| uint32_t dongle_max_pix_clk; | |
| unsigned short chip_caps; | |
| unsigned int dpcd_sink_count; | |
| struct hdcp_caps hdcp_caps; | |
| enum edp_revision edp_revision; | |
| union dpcd_sink_ext_caps dpcd_sink_ext_caps; | |
| struct psr_settings psr_settings; | |
| struct replay_settings replay_settings; | |
| /* Drive settings read from integrated info table */ | |
| struct dc_lane_settings bios_forced_drive_settings; | |
| /* Vendor specific LTTPR workaround variables */ | |
| uint8_t vendor_specific_lttpr_link_rate_wa; | |
| bool apply_vendor_specific_lttpr_link_rate_wa; | |
| /* MST record stream using this link */ | |
| struct link_flags { | |
| bool dp_keep_receiver_powered; | |
| bool dp_skip_DID2; | |
| bool dp_skip_reset_segment; | |
| bool dp_skip_fs_144hz; | |
| bool dp_mot_reset_segment; | |
| /* Some USB4 docks do not handle turning off MST DSC once it has been enabled. */ | |
| bool dpia_mst_dsc_always_on; | |
| /* Forced DPIA into TBT3 compatibility mode. */ | |
| bool dpia_forced_tbt3_mode; | |
| bool dongle_mode_timing_override; | |
| bool blank_stream_on_ocs_change; | |
| bool read_dpcd204h_on_irq_hpd; | |
| bool disable_assr_for_uhbr; | |
| } wa_flags; | |
| struct link_mst_stream_allocation_table mst_stream_alloc_table; | |
| struct dc_link_status link_status; | |
| struct dprx_states dprx_states; | |
| struct gpio *hpd_gpio; | |
| enum dc_link_fec_state fec_state; | |
| bool link_powered_externally; // Used to bypass hardware sequencing delays when panel is powered down forcibly | |
| struct dc_panel_config panel_config; | |
| struct phy_state phy_state; | |
| // BW ALLOCATON USB4 ONLY | |
| struct dc_dpia_bw_alloc dpia_bw_alloc_config; | |
| bool skip_implict_edp_power_control; | |
| }; | |
| /* Return an enumerated dc_link. | |
| * dc_link order is constant and determined at | |
| * boot time. They cannot be created or destroyed. | |
| * Use dc_get_caps() to get number of links. | |
| */ | |
| struct dc_link *dc_get_link_at_index(struct dc *dc, uint32_t link_index); | |
| /* Return instance id of the edp link. Inst 0 is primary edp link. */ | |
| bool dc_get_edp_link_panel_inst(const struct dc *dc, | |
| const struct dc_link *link, | |
| unsigned int *inst_out); | |
| /* Return an array of link pointers to edp links. */ | |
| void dc_get_edp_links(const struct dc *dc, | |
| struct dc_link **edp_links, | |
| int *edp_num); | |
| void dc_set_edp_power(const struct dc *dc, struct dc_link *edp_link, | |
| bool powerOn); | |
| /* The function initiates detection handshake over the given link. It first | |
| * determines if there are display connections over the link. If so it initiates | |
| * detection protocols supported by the connected receiver device. The function | |
| * contains protocol specific handshake sequences which are sometimes mandatory | |
| * to establish a proper connection between TX and RX. So it is always | |
| * recommended to call this function as the first link operation upon HPD event | |
| * or power up event. Upon completion, the function will update link structure | |
| * in place based on latest RX capabilities. The function may also cause dpms | |
| * to be reset to off for all currently enabled streams to the link. It is DM's | |
| * responsibility to serialize detection and DPMS updates. | |
| * | |
| * @reason - Indicate which event triggers this detection. dc may customize | |
| * detection flow depending on the triggering events. | |
| * return false - if detection is not fully completed. This could happen when | |
| * there is an unrecoverable error during detection or detection is partially | |
| * completed (detection has been delegated to dm mst manager ie. | |
| * link->connection_type == dc_connection_mst_branch when returning false). | |
| * return true - detection is completed, link has been fully updated with latest | |
| * detection result. | |
| */ | |
| bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason); | |
| struct dc_sink_init_data; | |
| /* When link connection type is dc_connection_mst_branch, remote sink can be | |
| * added to the link. The interface creates a remote sink and associates it with | |
| * current link. The sink will be retained by link until remove remote sink is | |
| * called. | |
| * | |
| * @dc_link - link the remote sink will be added to. | |
| * @edid - byte array of EDID raw data. | |
| * @len - size of the edid in byte | |
| * @init_data - | |
| */ | |
| struct dc_sink *dc_link_add_remote_sink( | |
| struct dc_link *dc_link, | |
| const uint8_t *edid, | |
| int len, | |
| struct dc_sink_init_data *init_data); | |
| /* Remove remote sink from a link with dc_connection_mst_branch connection type. | |
| * @link - link the sink should be removed from | |
| * @sink - sink to be removed. | |
| */ | |
| void dc_link_remove_remote_sink( | |
| struct dc_link *link, | |
| struct dc_sink *sink); | |
| /* Enable HPD interrupt handler for a given link */ | |
| void dc_link_enable_hpd(const struct dc_link *link); | |
| /* Disable HPD interrupt handler for a given link */ | |
| void dc_link_disable_hpd(const struct dc_link *link); | |
| /* determine if there is a sink connected to the link | |
| * | |
| * @type - dc_connection_single if connected, dc_connection_none otherwise. | |
| * return - false if an unexpected error occurs, true otherwise. | |
| * | |
| * NOTE: This function doesn't detect downstream sink connections i.e | |
| * dc_connection_mst_branch, dc_connection_sst_branch. In this case, it will | |
| * return dc_connection_single if the branch device is connected despite of | |
| * downstream sink's connection status. | |
| */ | |
| bool dc_link_detect_connection_type(struct dc_link *link, | |
| enum dc_connection_type *type); | |
| /* query current hpd pin value | |
| * return - true HPD is asserted (HPD high), false otherwise (HPD low) | |
| * | |
| */ | |
| bool dc_link_get_hpd_state(struct dc_link *link); | |
| /* Getter for cached link status from given link */ | |
| const struct dc_link_status *dc_link_get_status(const struct dc_link *link); | |
| /* enable/disable hardware HPD filter. | |
| * | |
| * @link - The link the HPD pin is associated with. | |
| * @enable = true - enable hardware HPD filter. HPD event will only queued to irq | |
| * handler once after no HPD change has been detected within dc default HPD | |
| * filtering interval since last HPD event. i.e if display keeps toggling hpd | |
| * pulses within default HPD interval, no HPD event will be received until HPD | |
| * toggles have stopped. Then HPD event will be queued to irq handler once after | |
| * dc default HPD filtering interval since last HPD event. | |
| * | |
| * @enable = false - disable hardware HPD filter. HPD event will be queued | |
| * immediately to irq handler after no HPD change has been detected within | |
| * IRQ_HPD (aka HPD short pulse) interval (i.e 2ms). | |
| */ | |
| void dc_link_enable_hpd_filter(struct dc_link *link, bool enable); | |
| /* submit i2c read/write payloads through ddc channel | |
| * @link_index - index to a link with ddc in i2c mode | |
| * @cmd - i2c command structure | |
| * return - true if success, false otherwise. | |
| */ | |
| bool dc_submit_i2c( | |
| struct dc *dc, | |
| uint32_t link_index, | |
| struct i2c_command *cmd); | |
| /* submit i2c read/write payloads through oem channel | |
| * @link_index - index to a link with ddc in i2c mode | |
| * @cmd - i2c command structure | |
| * return - true if success, false otherwise. | |
| */ | |
| bool dc_submit_i2c_oem( | |
| struct dc *dc, | |
| struct i2c_command *cmd); | |
| enum aux_return_code_type; | |
| /* Attempt to transfer the given aux payload. This function does not perform | |
| * retries or handle error states. The reply is returned in the payload->reply | |
| * and the result through operation_result. Returns the number of bytes | |
| * transferred,or -1 on a failure. | |
| */ | |
| int dc_link_aux_transfer_raw(struct ddc_service *ddc, | |
| struct aux_payload *payload, | |
| enum aux_return_code_type *operation_result); | |
| bool dc_is_oem_i2c_device_present( | |
| struct dc *dc, | |
| size_t slave_address | |
| ); | |
| /* return true if the connected receiver supports the hdcp version */ | |
| bool dc_link_is_hdcp14(struct dc_link *link, enum signal_type signal); | |
| bool dc_link_is_hdcp22(struct dc_link *link, enum signal_type signal); | |
| /* Notify DC about DP RX Interrupt (aka DP IRQ_HPD). | |
| * | |
| * TODO - When defer_handling is true the function will have a different purpose. | |
| * It no longer does complete hpd rx irq handling. We should create a separate | |
| * interface specifically for this case. | |
| * | |
| * Return: | |
| * true - Downstream port status changed. DM should call DC to do the | |
| * detection. | |
| * false - no change in Downstream port status. No further action required | |
| * from DM. | |
| */ | |
| bool dc_link_handle_hpd_rx_irq(struct dc_link *dc_link, | |
| union hpd_irq_data *hpd_irq_dpcd_data, bool *out_link_loss, | |
| bool defer_handling, bool *has_left_work); | |
| /* handle DP specs define test automation sequence*/ | |
| void dc_link_dp_handle_automated_test(struct dc_link *link); | |
| /* handle DP Link loss sequence and try to recover RX link loss with best | |
| * effort | |
| */ | |
| void dc_link_dp_handle_link_loss(struct dc_link *link); | |
| /* Determine if hpd rx irq should be handled or ignored | |
| * return true - hpd rx irq should be handled. | |
| * return false - it is safe to ignore hpd rx irq event | |
| */ | |
| bool dc_link_dp_allow_hpd_rx_irq(const struct dc_link *link); | |
| /* Determine if link loss is indicated with a given hpd_irq_dpcd_data. | |
| * @link - link the hpd irq data associated with | |
| * @hpd_irq_dpcd_data - input hpd irq data | |
| * return - true if hpd irq data indicates a link lost | |
| */ | |
| bool dc_link_check_link_loss_status(struct dc_link *link, | |
| union hpd_irq_data *hpd_irq_dpcd_data); | |
| /* Read hpd rx irq data from a given link | |
| * @link - link where the hpd irq data should be read from | |
| * @irq_data - output hpd irq data | |
| * return - DC_OK if hpd irq data is read successfully, otherwise hpd irq data | |
| * read has failed. | |
| */ | |
| enum dc_status dc_link_dp_read_hpd_rx_irq_data( | |
| struct dc_link *link, | |
| union hpd_irq_data *irq_data); | |
| /* The function clears recorded DP RX states in the link. DM should call this | |
| * function when it is resuming from S3 power state to previously connected links. | |
| * | |
| * TODO - in the future we should consider to expand link resume interface to | |
| * support clearing previous rx states. So we don't have to rely on dm to call | |
| * this interface explicitly. | |
| */ | |
| void dc_link_clear_dprx_states(struct dc_link *link); | |
| /* Destruct the mst topology of the link and reset the allocated payload table | |
| * | |
| * NOTE: this should only be called if DM chooses not to call dc_link_detect but | |
| * still wants to reset MST topology on an unplug event */ | |
| bool dc_link_reset_cur_dp_mst_topology(struct dc_link *link); | |
| /* The function calculates effective DP link bandwidth when a given link is | |
| * using the given link settings. | |
| * | |
| * return - total effective link bandwidth in kbps. | |
| */ | |
| uint32_t dc_link_bandwidth_kbps( | |
| const struct dc_link *link, | |
| const struct dc_link_settings *link_setting); | |
| /* The function takes a snapshot of current link resource allocation state | |
| * @dc: pointer to dc of the dm calling this | |
| * @map: a dc link resource snapshot defined internally to dc. | |
| * | |
| * DM needs to capture a snapshot of current link resource allocation mapping | |
| * and store it in its persistent storage. | |
| * | |
| * Some of the link resource is using first come first serve policy. | |
| * The allocation mapping depends on original hotplug order. This information | |
| * is lost after driver is loaded next time. The snapshot is used in order to | |
| * restore link resource to its previous state so user will get consistent | |
| * link capability allocation across reboot. | |
| * | |
| */ | |
| void dc_get_cur_link_res_map(const struct dc *dc, uint32_t *map); | |
| /* This function restores link resource allocation state from a snapshot | |
| * @dc: pointer to dc of the dm calling this | |
| * @map: a dc link resource snapshot defined internally to dc. | |
| * | |
| * DM needs to call this function after initial link detection on boot and | |
| * before first commit streams to restore link resource allocation state | |
| * from previous boot session. | |
| * | |
| * Some of the link resource is using first come first serve policy. | |
| * The allocation mapping depends on original hotplug order. This information | |
| * is lost after driver is loaded next time. The snapshot is used in order to | |
| * restore link resource to its previous state so user will get consistent | |
| * link capability allocation across reboot. | |
| * | |
| */ | |
| void dc_restore_link_res_map(const struct dc *dc, uint32_t *map); | |
| /* TODO: this is not meant to be exposed to DM. Should switch to stream update | |
| * interface i.e stream_update->dsc_config | |
| */ | |
| bool dc_link_update_dsc_config(struct pipe_ctx *pipe_ctx); | |
| /* translate a raw link rate data to bandwidth in kbps */ | |
| uint32_t dc_link_bw_kbps_from_raw_frl_link_rate_data(const struct dc *dc, uint8_t bw); | |
| /* determine the optimal bandwidth given link and required bw. | |
| * @link - current detected link | |
| * @req_bw - requested bandwidth in kbps | |
| * @link_settings - returned most optimal link settings that can fit the | |
| * requested bandwidth | |
| * return - false if link can't support requested bandwidth, true if link | |
| * settings is found. | |
| */ | |
| bool dc_link_decide_edp_link_settings(struct dc_link *link, | |
| struct dc_link_settings *link_settings, | |
| uint32_t req_bw); | |
| /* return the max dp link settings can be driven by the link without considering | |
| * connected RX device and its capability | |
| */ | |
| bool dc_link_dp_get_max_link_enc_cap(const struct dc_link *link, | |
| struct dc_link_settings *max_link_enc_cap); | |
| /* determine when the link is driving MST mode, what DP link channel coding | |
| * format will be used. The decision will remain unchanged until next HPD event. | |
| * | |
| * @link - a link with DP RX connection | |
| * return - if stream is committed to this link with MST signal type, type of | |
| * channel coding format dc will choose. | |
| */ | |
| enum dp_link_encoding dc_link_dp_mst_decide_link_encoding_format( | |
| const struct dc_link *link); | |
| /* get max dp link settings the link can enable with all things considered. (i.e | |
| * TX/RX/Cable capabilities and dp override policies. | |
| * | |
| * @link - a link with DP RX connection | |
| * return - max dp link settings the link can enable. | |
| * | |
| */ | |
| const struct dc_link_settings *dc_link_get_link_cap(const struct dc_link *link); | |
| /* Get the highest encoding format that the link supports; highest meaning the | |
| * encoding format which supports the maximum bandwidth. | |
| * | |
| * @link - a link with DP RX connection | |
| * return - highest encoding format link supports. | |
| */ | |
| enum dc_link_encoding_format dc_link_get_highest_encoding_format(const struct dc_link *link); | |
| /* Check if a RX (ex. DP sink, MST hub, passive or active dongle) is connected | |
| * to a link with dp connector signal type. | |
| * @link - a link with dp connector signal type | |
| * return - true if connected, false otherwise | |
| */ | |
| bool dc_link_is_dp_sink_present(struct dc_link *link); | |
| /* Force DP lane settings update to main-link video signal and notify the change | |
| * to DP RX via DPCD. This is a debug interface used for video signal integrity | |
| * tuning purpose. The interface assumes link has already been enabled with DP | |
| * signal. | |
| * | |
| * @lt_settings - a container structure with desired hw_lane_settings | |
| */ | |
| void dc_link_set_drive_settings(struct dc *dc, | |
| struct link_training_settings *lt_settings, | |
| struct dc_link *link); | |
| /* Enable a test pattern in Link or PHY layer in an active link for compliance | |
| * test or debugging purpose. The test pattern will remain until next un-plug. | |
| * | |
| * @link - active link with DP signal output enabled. | |
| * @test_pattern - desired test pattern to output. | |
| * NOTE: set to DP_TEST_PATTERN_VIDEO_MODE to disable previous test pattern. | |
| * @test_pattern_color_space - for video test pattern choose a desired color | |
| * space. | |
| * @p_link_settings - For PHY pattern choose a desired link settings | |
| * @p_custom_pattern - some test pattern will require a custom input to | |
| * customize some pattern details. Otherwise keep it to NULL. | |
| * @cust_pattern_size - size of the custom pattern input. | |
| * | |
| */ | |
| bool dc_link_dp_set_test_pattern( | |
| struct dc_link *link, | |
| enum dp_test_pattern test_pattern, | |
| enum dp_test_pattern_color_space test_pattern_color_space, | |
| const struct link_training_settings *p_link_settings, | |
| const unsigned char *p_custom_pattern, | |
| unsigned int cust_pattern_size); | |
| /* Force DP link settings to always use a specific value until reboot to a | |
| * specific link. If link has already been enabled, the interface will also | |
| * switch to desired link settings immediately. This is a debug interface to | |
| * generic dp issue trouble shooting. | |
| */ | |
| void dc_link_set_preferred_link_settings(struct dc *dc, | |
| struct dc_link_settings *link_setting, | |
| struct dc_link *link); | |
| /* Force DP link to customize a specific link training behavior by overriding to | |
| * standard DP specs defined protocol. This is a debug interface to trouble shoot | |
| * display specific link training issues or apply some display specific | |
| * workaround in link training. | |
| * | |
| * @link_settings - if not NULL, force preferred link settings to the link. | |
| * @lt_override - a set of override pointers. If any pointer is none NULL, dc | |
| * will apply this particular override in future link training. If NULL is | |
| * passed in, dc resets previous overrides. | |
| * NOTE: DM must keep the memory from override pointers until DM resets preferred | |
| * training settings. | |
| */ | |
| void dc_link_set_preferred_training_settings(struct dc *dc, | |
| struct dc_link_settings *link_setting, | |
| struct dc_link_training_overrides *lt_overrides, | |
| struct dc_link *link, | |
| bool skip_immediate_retrain); | |
| /* return - true if FEC is supported with connected DP RX, false otherwise */ | |
| bool dc_link_is_fec_supported(const struct dc_link *link); | |
| /* query FEC enablement policy to determine if FEC will be enabled by dc during | |
| * link enablement. | |
| * return - true if FEC should be enabled, false otherwise. | |
| */ | |
| bool dc_link_should_enable_fec(const struct dc_link *link); | |
| /* determine lttpr mode the current link should be enabled with a specific link | |
| * settings. | |
| */ | |
| enum lttpr_mode dc_link_decide_lttpr_mode(struct dc_link *link, | |
| struct dc_link_settings *link_setting); | |
| /* Force DP RX to update its power state. | |
| * NOTE: this interface doesn't update dp main-link. Calling this function will | |
| * cause DP TX main-link and DP RX power states out of sync. DM has to restore | |
| * RX power state back upon finish DM specific execution requiring DP RX in a | |
| * specific power state. | |
| * @on - true to set DP RX in D0 power state, false to set DP RX in D3 power | |
| * state. | |
| */ | |
| void dc_link_dp_receiver_power_ctrl(struct dc_link *link, bool on); | |
| /* Force link to read base dp receiver caps from dpcd 000h - 00Fh and overwrite | |
| * current value read from extended receiver cap from 02200h - 0220Fh. | |
| * Some DP RX has problems of providing accurate DP receiver caps from extended | |
| * field, this interface is a workaround to revert link back to use base caps. | |
| */ | |
| void dc_link_overwrite_extended_receiver_cap( | |
| struct dc_link *link); | |
| void dc_link_edp_panel_backlight_power_on(struct dc_link *link, | |
| bool wait_for_hpd); | |
| /* Set backlight level of an embedded panel (eDP, LVDS). | |
| * backlight_pwm_u16_16 is unsigned 32 bit with 16 bit integer | |
| * and 16 bit fractional, where 1.0 is max backlight value. | |
| */ | |
| bool dc_link_set_backlight_level(const struct dc_link *dc_link, | |
| uint32_t backlight_pwm_u16_16, | |
| uint32_t frame_ramp); | |
| /* Set/get nits-based backlight level of an embedded panel (eDP, LVDS). */ | |
| bool dc_link_set_backlight_level_nits(struct dc_link *link, | |
| bool isHDR, | |
| uint32_t backlight_millinits, | |
| uint32_t transition_time_in_ms); | |
| bool dc_link_get_backlight_level_nits(struct dc_link *link, | |
| uint32_t *backlight_millinits, | |
| uint32_t *backlight_millinits_peak); | |
| int dc_link_get_backlight_level(const struct dc_link *dc_link); | |
| int dc_link_get_target_backlight_pwm(const struct dc_link *link); | |
| bool dc_link_set_psr_allow_active(struct dc_link *dc_link, const bool *enable, | |
| bool wait, bool force_static, const unsigned int *power_opts); | |
| bool dc_link_get_psr_state(const struct dc_link *dc_link, enum dc_psr_state *state); | |
| bool dc_link_setup_psr(struct dc_link *dc_link, | |
| const struct dc_stream_state *stream, struct psr_config *psr_config, | |
| struct psr_context *psr_context); | |
| /* | |
| * Communicate with DMUB to allow or disallow Panel Replay on the specified link: | |
| * | |
| * @link: pointer to the dc_link struct instance | |
| * @enable: enable(active) or disable(inactive) replay | |
| * @wait: state transition need to wait the active set completed. | |
| * @force_static: force disable(inactive) the replay | |
| * @power_opts: set power optimazation parameters to DMUB. | |
| * | |
| * return: allow Replay active will return true, else will return false. | |
| */ | |
| bool dc_link_set_replay_allow_active(struct dc_link *dc_link, const bool *enable, | |
| bool wait, bool force_static, const unsigned int *power_opts); | |
| bool dc_link_get_replay_state(const struct dc_link *dc_link, uint64_t *state); | |
| /* On eDP links this function call will stall until T12 has elapsed. | |
| * If the panel is not in power off state, this function will return | |
| * immediately. | |
| */ | |
| bool dc_link_wait_for_t12(struct dc_link *link); | |
| /* Determine if dp trace has been initialized to reflect upto date result * | |
| * return - true if trace is initialized and has valid data. False dp trace | |
| * doesn't have valid result. | |
| */ | |
| bool dc_dp_trace_is_initialized(struct dc_link *link); | |
| /* Query a dp trace flag to indicate if the current dp trace data has been | |
| * logged before | |
| */ | |
| bool dc_dp_trace_is_logged(struct dc_link *link, | |
| bool in_detection); | |
| /* Set dp trace flag to indicate whether DM has already logged the current dp | |
| * trace data. DM can set is_logged to true upon logging and check | |
| * dc_dp_trace_is_logged before logging to avoid logging the same result twice. | |
| */ | |
| void dc_dp_trace_set_is_logged_flag(struct dc_link *link, | |
| bool in_detection, | |
| bool is_logged); | |
| /* Obtain driver time stamp for last dp link training end. The time stamp is | |
| * formatted based on dm_get_timestamp DM function. | |
| * @in_detection - true to get link training end time stamp of last link | |
| * training in detection sequence. false to get link training end time stamp | |
| * of last link training in commit (dpms) sequence | |
| */ | |
| unsigned long long dc_dp_trace_get_lt_end_timestamp(struct dc_link *link, | |
| bool in_detection); | |
| /* Get how many link training attempts dc has done with latest sequence. | |
| * @in_detection - true to get link training count of last link | |
| * training in detection sequence. false to get link training count of last link | |
| * training in commit (dpms) sequence | |
| */ | |
| const struct dp_trace_lt_counts *dc_dp_trace_get_lt_counts(struct dc_link *link, | |
| bool in_detection); | |
| /* Get how many link loss has happened since last link training attempts */ | |
| unsigned int dc_dp_trace_get_link_loss_count(struct dc_link *link); | |
| /* | |
| * USB4 DPIA BW ALLOCATION PUBLIC FUNCTIONS | |
| */ | |
| /* | |
| * Send a request from DP-Tx requesting to allocate BW remotely after | |
| * allocating it locally. This will get processed by CM and a CB function | |
| * will be called. | |
| * | |
| * @link: pointer to the dc_link struct instance | |
| * @req_bw: The requested bw in Kbyte to allocated | |
| * | |
| * return: none | |
| */ | |
| void dc_link_set_usb4_req_bw_req(struct dc_link *link, int req_bw); | |
| /* | |
| * Handle function for when the status of the Request above is complete. | |
| * We will find out the result of allocating on CM and update structs. | |
| * | |
| * @link: pointer to the dc_link struct instance | |
| * @bw: Allocated or Estimated BW depending on the result | |
| * @result: Response type | |
| * | |
| * return: none | |
| */ | |
| void dc_link_handle_usb4_bw_alloc_response(struct dc_link *link, | |
| uint8_t bw, uint8_t result); | |
| /* | |
| * Handle the USB4 BW Allocation related functionality here: | |
| * Plug => Try to allocate max bw from timing parameters supported by the sink | |
| * Unplug => de-allocate bw | |
| * | |
| * @link: pointer to the dc_link struct instance | |
| * @peak_bw: Peak bw used by the link/sink | |
| * | |
| * return: allocated bw else return 0 | |
| */ | |
| int dc_link_dp_dpia_handle_usb4_bandwidth_allocation_for_link( | |
| struct dc_link *link, int peak_bw); | |
| /* | |
| * Validate the BW of all the valid DPIA links to make sure it doesn't exceed | |
| * available BW for each host router | |
| * | |
| * @dc: pointer to dc struct | |
| * @stream: pointer to all possible streams | |
| * @count: number of valid DPIA streams | |
| * | |
| * return: TRUE if bw used by DPIAs doesn't exceed available BW else return FALSE | |
| */ | |
| bool dc_link_dp_dpia_validate(struct dc *dc, const struct dc_stream_state *streams, | |
| const unsigned int count); | |
| /* Sink Interfaces - A sink corresponds to a display output device */ | |
| struct dc_container_id { | |
| // 128bit GUID in binary form | |
| unsigned char guid[16]; | |
| // 8 byte port ID -> ELD.PortID | |
| unsigned int portId[2]; | |
| // 128bit GUID in binary formufacturer name -> ELD.ManufacturerName | |
| unsigned short manufacturerName; | |
| // 2 byte product code -> ELD.ProductCode | |
| unsigned short productCode; | |
| }; | |
| struct dc_sink_dsc_caps { | |
| // 'true' if these are virtual DPCD's DSC caps (immediately upstream of sink in MST topology), | |
| // 'false' if they are sink's DSC caps | |
| bool is_virtual_dpcd_dsc; | |
| // 'true' if MST topology supports DSC passthrough for sink | |
| // 'false' if MST topology does not support DSC passthrough | |
| bool is_dsc_passthrough_supported; | |
| struct dsc_dec_dpcd_caps dsc_dec_caps; | |
| }; | |
| struct dc_sink_fec_caps { | |
| bool is_rx_fec_supported; | |
| bool is_topology_fec_supported; | |
| }; | |
| struct scdc_caps { | |
| union hdmi_scdc_manufacturer_OUI_data manufacturer_OUI; | |
| union hdmi_scdc_device_id_data device_id; | |
| }; | |
| /* | |
| * The sink structure contains EDID and other display device properties | |
| */ | |
| struct dc_sink { | |
| enum signal_type sink_signal; | |
| struct dc_edid dc_edid; /* raw edid */ | |
| struct dc_edid_caps edid_caps; /* parse display caps */ | |
| struct dc_container_id *dc_container_id; | |
| uint32_t dongle_max_pix_clk; | |
| void *priv; | |
| struct stereo_3d_features features_3d[TIMING_3D_FORMAT_MAX]; | |
| bool converter_disable_audio; | |
| struct scdc_caps scdc_caps; | |
| struct dc_sink_dsc_caps dsc_caps; | |
| struct dc_sink_fec_caps fec_caps; | |
| bool is_vsc_sdp_colorimetry_supported; | |
| /* private to DC core */ | |
| struct dc_link *link; | |
| struct dc_context *ctx; | |
| uint32_t sink_id; | |
| /* private to dc_sink.c */ | |
| // refcount must be the last member in dc_sink, since we want the | |
| // sink structure to be logically cloneable up to (but not including) | |
| // refcount | |
| struct kref refcount; | |
| }; | |
| void dc_sink_retain(struct dc_sink *sink); | |
| void dc_sink_release(struct dc_sink *sink); | |
| struct dc_sink_init_data { | |
| enum signal_type sink_signal; | |
| struct dc_link *link; | |
| uint32_t dongle_max_pix_clk; | |
| bool converter_disable_audio; | |
| }; | |
| struct dc_sink *dc_sink_create(const struct dc_sink_init_data *init_params); | |
| /* Newer interfaces */ | |
| struct dc_cursor { | |
| struct dc_plane_address address; | |
| struct dc_cursor_attributes attributes; | |
| }; | |
| /* Interrupt interfaces */ | |
| enum dc_irq_source dc_interrupt_to_irq_source( | |
| struct dc *dc, | |
| uint32_t src_id, | |
| uint32_t ext_id); | |
| bool dc_interrupt_set(struct dc *dc, enum dc_irq_source src, bool enable); | |
| void dc_interrupt_ack(struct dc *dc, enum dc_irq_source src); | |
| enum dc_irq_source dc_get_hpd_irq_source_at_index( | |
| struct dc *dc, uint32_t link_index); | |
| void dc_notify_vsync_int_state(struct dc *dc, struct dc_stream_state *stream, bool enable); | |
| /* Power Interfaces */ | |
| void dc_set_power_state( | |
| struct dc *dc, | |
| enum dc_acpi_cm_power_state power_state); | |
| void dc_resume(struct dc *dc); | |
| void dc_power_down_on_boot(struct dc *dc); | |
| /* | |
| * HDCP Interfaces | |
| */ | |
| enum hdcp_message_status dc_process_hdcp_msg( | |
| enum signal_type signal, | |
| struct dc_link *link, | |
| struct hdcp_protection_message *message_info); | |
| bool dc_is_dmcu_initialized(struct dc *dc); | |
| enum dc_status dc_set_clock(struct dc *dc, enum dc_clock_type clock_type, uint32_t clk_khz, uint32_t stepping); | |
| void dc_get_clock(struct dc *dc, enum dc_clock_type clock_type, struct dc_clock_config *clock_cfg); | |
| bool dc_is_plane_eligible_for_idle_optimizations(struct dc *dc, | |
| unsigned int pitch, | |
| unsigned int height, | |
| enum surface_pixel_format format, | |
| struct dc_cursor_attributes *cursor_attr); | |
| #define dc_allow_idle_optimizations(dc, allow) dc_allow_idle_optimizations_internal(dc, allow, __func__) | |
| #define dc_exit_ips_for_hw_access(dc) dc_exit_ips_for_hw_access_internal(dc, __func__) | |
| void dc_allow_idle_optimizations_internal(struct dc *dc, bool allow, const char *caller_name); | |
| void dc_exit_ips_for_hw_access_internal(struct dc *dc, const char *caller_name); | |
| bool dc_dmub_is_ips_idle_state(struct dc *dc); | |
| /* set min and max memory clock to lowest and highest DPM level, respectively */ | |
| void dc_unlock_memory_clock_frequency(struct dc *dc); | |
| /* set min memory clock to the min required for current mode, max to maxDPM */ | |
| void dc_lock_memory_clock_frequency(struct dc *dc); | |
| /* set soft max for memclk, to be used for AC/DC switching clock limitations */ | |
| void dc_enable_dcmode_clk_limit(struct dc *dc, bool enable); | |
| /* cleanup on driver unload */ | |
| void dc_hardware_release(struct dc *dc); | |
| /* disables fw based mclk switch */ | |
| void dc_mclk_switch_using_fw_based_vblank_stretch_shut_down(struct dc *dc); | |
| bool dc_set_psr_allow_active(struct dc *dc, bool enable); | |
| bool dc_set_replay_allow_active(struct dc *dc, bool active); | |
| bool dc_set_ips_disable(struct dc *dc, unsigned int disable_ips); | |
| void dc_z10_restore(const struct dc *dc); | |
| void dc_z10_save_init(struct dc *dc); | |
| bool dc_is_dmub_outbox_supported(struct dc *dc); | |
| bool dc_enable_dmub_notifications(struct dc *dc); | |
| bool dc_abm_save_restore( | |
| struct dc *dc, | |
| struct dc_stream_state *stream, | |
| struct abm_save_restore *pData); | |
| void dc_enable_dmub_outbox(struct dc *dc); | |
| bool dc_process_dmub_aux_transfer_async(struct dc *dc, | |
| uint32_t link_index, | |
| struct aux_payload *payload); | |
| /* Get dc link index from dpia port index */ | |
| uint8_t get_link_index_from_dpia_port_index(const struct dc *dc, | |
| uint8_t dpia_port_index); | |
| bool dc_process_dmub_set_config_async(struct dc *dc, | |
| uint32_t link_index, | |
| struct set_config_cmd_payload *payload, | |
| struct dmub_notification *notify); | |
| enum dc_status dc_process_dmub_set_mst_slots(const struct dc *dc, | |
| uint32_t link_index, | |
| uint8_t mst_alloc_slots, | |
| uint8_t *mst_slots_in_use); | |
| void dc_process_dmub_dpia_set_tps_notification(const struct dc *dc, uint32_t link_index, uint8_t tps); | |
| void dc_process_dmub_dpia_hpd_int_enable(const struct dc *dc, | |
| uint32_t hpd_int_enable); | |
| void dc_print_dmub_diagnostic_data(const struct dc *dc); | |
| void dc_query_current_properties(struct dc *dc, struct dc_current_properties *properties); | |
| struct dc_power_profile { | |
| int power_level; /* Lower is better */ | |
| }; | |
| struct dc_power_profile dc_get_power_profile_for_dc_state(const struct dc_state *context); | |
| /* DSC Interfaces */ | |
| #include "dc_dsc.h" | |
| /* Disable acc mode Interfaces */ | |
| void dc_disable_accelerated_mode(struct dc *dc); | |
| bool dc_is_timing_changed(struct dc_stream_state *cur_stream, | |
| struct dc_stream_state *new_stream); | |
| #endif /* DC_INTERFACE_H_ */ |