| /* | |
| * Copyright © 2007 David Airlie | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice (including the next | |
| * paragraph) shall be included in all copies or substantial portions of the | |
| * Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER | |
| * DEALINGS IN THE SOFTWARE. | |
| * | |
| * Authors: | |
| * David Airlie | |
| */ | |
| #include <linux/console.h> | |
| #include <linux/delay.h> | |
| #include <linux/errno.h> | |
| #include <linux/fb.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/module.h> | |
| #include <linux/string.h> | |
| #include <linux/sysrq.h> | |
| #include <linux/tty.h> | |
| #include <linux/vga_switcheroo.h> | |
| #include <drm/drm_crtc.h> | |
| #include <drm/drm_crtc_helper.h> | |
| #include <drm/drm_fb_helper.h> | |
| #include <drm/drm_fourcc.h> | |
| #include <drm/drm_gem_framebuffer_helper.h> | |
| #include "gem/i915_gem_mman.h" | |
| #include "gem/i915_gem_object.h" | |
| #include "i915_drv.h" | |
| #include "intel_display_types.h" | |
| #include "intel_fb.h" | |
| #include "intel_fb_pin.h" | |
| #include "intel_fbdev.h" | |
| #include "intel_fbdev_fb.h" | |
| #include "intel_frontbuffer.h" | |
| struct intel_fbdev { | |
| struct drm_fb_helper helper; | |
| struct intel_framebuffer *fb; | |
| struct i915_vma *vma; | |
| unsigned long vma_flags; | |
| int preferred_bpp; | |
| /* Whether or not fbdev hpd processing is temporarily suspended */ | |
| bool hpd_suspended: 1; | |
| /* Set when a hotplug was received while HPD processing was suspended */ | |
| bool hpd_waiting: 1; | |
| /* Protects hpd_suspended */ | |
| struct mutex hpd_lock; | |
| }; | |
| static struct intel_fbdev *to_intel_fbdev(struct drm_fb_helper *fb_helper) | |
| { | |
| return container_of(fb_helper, struct intel_fbdev, helper); | |
| } | |
| static struct intel_frontbuffer *to_frontbuffer(struct intel_fbdev *ifbdev) | |
| { | |
| return ifbdev->fb->frontbuffer; | |
| } | |
| static void intel_fbdev_invalidate(struct intel_fbdev *ifbdev) | |
| { | |
| intel_frontbuffer_invalidate(to_frontbuffer(ifbdev), ORIGIN_CPU); | |
| } | |
| FB_GEN_DEFAULT_DEFERRED_IOMEM_OPS(intel_fbdev, | |
| drm_fb_helper_damage_range, | |
| drm_fb_helper_damage_area) | |
| static int intel_fbdev_set_par(struct fb_info *info) | |
| { | |
| struct intel_fbdev *ifbdev = to_intel_fbdev(info->par); | |
| int ret; | |
| ret = drm_fb_helper_set_par(info); | |
| if (ret == 0) | |
| intel_fbdev_invalidate(ifbdev); | |
| return ret; | |
| } | |
| static int intel_fbdev_blank(int blank, struct fb_info *info) | |
| { | |
| struct intel_fbdev *ifbdev = to_intel_fbdev(info->par); | |
| int ret; | |
| ret = drm_fb_helper_blank(blank, info); | |
| if (ret == 0) | |
| intel_fbdev_invalidate(ifbdev); | |
| return ret; | |
| } | |
| static int intel_fbdev_pan_display(struct fb_var_screeninfo *var, | |
| struct fb_info *info) | |
| { | |
| struct intel_fbdev *ifbdev = to_intel_fbdev(info->par); | |
| int ret; | |
| ret = drm_fb_helper_pan_display(var, info); | |
| if (ret == 0) | |
| intel_fbdev_invalidate(ifbdev); | |
| return ret; | |
| } | |
| static int intel_fbdev_mmap(struct fb_info *info, struct vm_area_struct *vma) | |
| { | |
| struct intel_fbdev *fbdev = to_intel_fbdev(info->par); | |
| struct drm_gem_object *bo = drm_gem_fb_get_obj(&fbdev->fb->base, 0); | |
| struct drm_i915_gem_object *obj = to_intel_bo(bo); | |
| return i915_gem_fb_mmap(obj, vma); | |
| } | |
| static void intel_fbdev_fb_destroy(struct fb_info *info) | |
| { | |
| struct drm_fb_helper *fb_helper = info->par; | |
| struct intel_fbdev *ifbdev = container_of(fb_helper, struct intel_fbdev, helper); | |
| drm_fb_helper_fini(&ifbdev->helper); | |
| /* | |
| * We rely on the object-free to release the VMA pinning for | |
| * the info->screen_base mmaping. Leaking the VMA is simpler than | |
| * trying to rectify all the possible error paths leading here. | |
| */ | |
| intel_fb_unpin_vma(ifbdev->vma, ifbdev->vma_flags); | |
| drm_framebuffer_remove(&ifbdev->fb->base); | |
| drm_client_release(&fb_helper->client); | |
| drm_fb_helper_unprepare(&ifbdev->helper); | |
| kfree(ifbdev); | |
| } | |
| __diag_push(); | |
| __diag_ignore_all("-Woverride-init", "Allow field initialization overrides for fb ops"); | |
| static const struct fb_ops intelfb_ops = { | |
| .owner = THIS_MODULE, | |
| __FB_DEFAULT_DEFERRED_OPS_RDWR(intel_fbdev), | |
| DRM_FB_HELPER_DEFAULT_OPS, | |
| .fb_set_par = intel_fbdev_set_par, | |
| .fb_blank = intel_fbdev_blank, | |
| .fb_pan_display = intel_fbdev_pan_display, | |
| __FB_DEFAULT_DEFERRED_OPS_DRAW(intel_fbdev), | |
| .fb_mmap = intel_fbdev_mmap, | |
| .fb_destroy = intel_fbdev_fb_destroy, | |
| }; | |
| __diag_pop(); | |
| static int intelfb_create(struct drm_fb_helper *helper, | |
| struct drm_fb_helper_surface_size *sizes) | |
| { | |
| struct intel_fbdev *ifbdev = to_intel_fbdev(helper); | |
| struct intel_framebuffer *fb = ifbdev->fb; | |
| struct drm_device *dev = helper->dev; | |
| struct drm_i915_private *dev_priv = to_i915(dev); | |
| const struct i915_gtt_view view = { | |
| .type = I915_GTT_VIEW_NORMAL, | |
| }; | |
| intel_wakeref_t wakeref; | |
| struct fb_info *info; | |
| struct i915_vma *vma; | |
| unsigned long flags = 0; | |
| bool prealloc = false; | |
| struct drm_i915_gem_object *obj; | |
| int ret; | |
| mutex_lock(&ifbdev->hpd_lock); | |
| ret = ifbdev->hpd_suspended ? -EAGAIN : 0; | |
| mutex_unlock(&ifbdev->hpd_lock); | |
| if (ret) | |
| return ret; | |
| ifbdev->fb = NULL; | |
| if (fb && | |
| (sizes->fb_width > fb->base.width || | |
| sizes->fb_height > fb->base.height)) { | |
| drm_dbg_kms(&dev_priv->drm, | |
| "BIOS fb too small (%dx%d), we require (%dx%d)," | |
| " releasing it\n", | |
| fb->base.width, fb->base.height, | |
| sizes->fb_width, sizes->fb_height); | |
| drm_framebuffer_put(&fb->base); | |
| fb = NULL; | |
| } | |
| if (!fb || drm_WARN_ON(dev, !intel_fb_obj(&fb->base))) { | |
| drm_dbg_kms(&dev_priv->drm, | |
| "no BIOS fb, allocating a new one\n"); | |
| fb = intel_fbdev_fb_alloc(helper, sizes); | |
| if (IS_ERR(fb)) | |
| return PTR_ERR(fb); | |
| } else { | |
| drm_dbg_kms(&dev_priv->drm, "re-using BIOS fb\n"); | |
| prealloc = true; | |
| sizes->fb_width = fb->base.width; | |
| sizes->fb_height = fb->base.height; | |
| } | |
| wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm); | |
| /* Pin the GGTT vma for our access via info->screen_base. | |
| * This also validates that any existing fb inherited from the | |
| * BIOS is suitable for own access. | |
| */ | |
| vma = intel_fb_pin_to_ggtt(&fb->base, &view, | |
| fb->min_alignment, 0, | |
| false, &flags); | |
| if (IS_ERR(vma)) { | |
| ret = PTR_ERR(vma); | |
| goto out_unlock; | |
| } | |
| info = drm_fb_helper_alloc_info(helper); | |
| if (IS_ERR(info)) { | |
| drm_err(&dev_priv->drm, "Failed to allocate fb_info (%pe)\n", info); | |
| ret = PTR_ERR(info); | |
| goto out_unpin; | |
| } | |
| ifbdev->helper.fb = &fb->base; | |
| info->fbops = &intelfb_ops; | |
| obj = intel_fb_obj(&fb->base); | |
| ret = intel_fbdev_fb_fill_info(dev_priv, info, obj, vma); | |
| if (ret) | |
| goto out_unpin; | |
| drm_fb_helper_fill_info(info, &ifbdev->helper, sizes); | |
| /* If the object is shmemfs backed, it will have given us zeroed pages. | |
| * If the object is stolen however, it will be full of whatever | |
| * garbage was left in there. | |
| */ | |
| if (!i915_gem_object_is_shmem(obj) && !prealloc) | |
| memset_io(info->screen_base, 0, info->screen_size); | |
| /* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */ | |
| drm_dbg_kms(&dev_priv->drm, "allocated %dx%d fb: 0x%08x\n", | |
| fb->base.width, fb->base.height, | |
| i915_ggtt_offset(vma)); | |
| ifbdev->fb = fb; | |
| ifbdev->vma = vma; | |
| ifbdev->vma_flags = flags; | |
| intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref); | |
| return 0; | |
| out_unpin: | |
| intel_fb_unpin_vma(vma, flags); | |
| out_unlock: | |
| intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref); | |
| return ret; | |
| } | |
| static int intelfb_dirty(struct drm_fb_helper *helper, struct drm_clip_rect *clip) | |
| { | |
| if (!(clip->x1 < clip->x2 && clip->y1 < clip->y2)) | |
| return 0; | |
| if (helper->fb->funcs->dirty) | |
| return helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, clip, 1); | |
| return 0; | |
| } | |
| static const struct drm_fb_helper_funcs intel_fb_helper_funcs = { | |
| .fb_probe = intelfb_create, | |
| .fb_dirty = intelfb_dirty, | |
| }; | |
| /* | |
| * Build an intel_fbdev struct using a BIOS allocated framebuffer, if possible. | |
| * The core display code will have read out the current plane configuration, | |
| * so we use that to figure out if there's an object for us to use as the | |
| * fb, and if so, we re-use it for the fbdev configuration. | |
| * | |
| * Note we only support a single fb shared across pipes for boot (mostly for | |
| * fbcon), so we just find the biggest and use that. | |
| */ | |
| static bool intel_fbdev_init_bios(struct drm_device *dev, | |
| struct intel_fbdev *ifbdev) | |
| { | |
| struct drm_i915_private *i915 = to_i915(dev); | |
| struct intel_framebuffer *fb = NULL; | |
| struct intel_crtc *crtc; | |
| unsigned int max_size = 0; | |
| /* Find the largest fb */ | |
| for_each_intel_crtc(dev, crtc) { | |
| struct intel_crtc_state *crtc_state = | |
| to_intel_crtc_state(crtc->base.state); | |
| struct intel_plane *plane = | |
| to_intel_plane(crtc->base.primary); | |
| struct intel_plane_state *plane_state = | |
| to_intel_plane_state(plane->base.state); | |
| struct drm_i915_gem_object *obj = | |
| intel_fb_obj(plane_state->uapi.fb); | |
| if (!crtc_state->uapi.active) { | |
| drm_dbg_kms(&i915->drm, | |
| "[CRTC:%d:%s] not active, skipping\n", | |
| crtc->base.base.id, crtc->base.name); | |
| continue; | |
| } | |
| if (!obj) { | |
| drm_dbg_kms(&i915->drm, | |
| "[PLANE:%d:%s] no fb, skipping\n", | |
| plane->base.base.id, plane->base.name); | |
| continue; | |
| } | |
| if (intel_bo_to_drm_bo(obj)->size > max_size) { | |
| drm_dbg_kms(&i915->drm, | |
| "found possible fb from [PLANE:%d:%s]\n", | |
| plane->base.base.id, plane->base.name); | |
| fb = to_intel_framebuffer(plane_state->uapi.fb); | |
| max_size = intel_bo_to_drm_bo(obj)->size; | |
| } | |
| } | |
| if (!fb) { | |
| drm_dbg_kms(&i915->drm, | |
| "no active fbs found, not using BIOS config\n"); | |
| goto out; | |
| } | |
| /* Now make sure all the pipes will fit into it */ | |
| for_each_intel_crtc(dev, crtc) { | |
| struct intel_crtc_state *crtc_state = | |
| to_intel_crtc_state(crtc->base.state); | |
| struct intel_plane *plane = | |
| to_intel_plane(crtc->base.primary); | |
| unsigned int cur_size; | |
| if (!crtc_state->uapi.active) { | |
| drm_dbg_kms(&i915->drm, | |
| "[CRTC:%d:%s] not active, skipping\n", | |
| crtc->base.base.id, crtc->base.name); | |
| continue; | |
| } | |
| drm_dbg_kms(&i915->drm, "checking [PLANE:%d:%s] for BIOS fb\n", | |
| plane->base.base.id, plane->base.name); | |
| /* | |
| * See if the plane fb we found above will fit on this | |
| * pipe. Note we need to use the selected fb's pitch and bpp | |
| * rather than the current pipe's, since they differ. | |
| */ | |
| cur_size = crtc_state->uapi.adjusted_mode.crtc_hdisplay; | |
| cur_size = cur_size * fb->base.format->cpp[0]; | |
| if (fb->base.pitches[0] < cur_size) { | |
| drm_dbg_kms(&i915->drm, | |
| "fb not wide enough for [PLANE:%d:%s] (%d vs %d)\n", | |
| plane->base.base.id, plane->base.name, | |
| cur_size, fb->base.pitches[0]); | |
| fb = NULL; | |
| break; | |
| } | |
| cur_size = crtc_state->uapi.adjusted_mode.crtc_vdisplay; | |
| cur_size = intel_fb_align_height(&fb->base, 0, cur_size); | |
| cur_size *= fb->base.pitches[0]; | |
| drm_dbg_kms(&i915->drm, | |
| "[CRTC:%d:%s] area: %dx%d, bpp: %d, size: %d\n", | |
| crtc->base.base.id, crtc->base.name, | |
| crtc_state->uapi.adjusted_mode.crtc_hdisplay, | |
| crtc_state->uapi.adjusted_mode.crtc_vdisplay, | |
| fb->base.format->cpp[0] * 8, | |
| cur_size); | |
| if (cur_size > max_size) { | |
| drm_dbg_kms(&i915->drm, | |
| "fb not big enough for [PLANE:%d:%s] (%d vs %d)\n", | |
| plane->base.base.id, plane->base.name, | |
| cur_size, max_size); | |
| fb = NULL; | |
| break; | |
| } | |
| drm_dbg_kms(&i915->drm, | |
| "fb big enough [PLANE:%d:%s] (%d >= %d)\n", | |
| plane->base.base.id, plane->base.name, | |
| max_size, cur_size); | |
| } | |
| if (!fb) { | |
| drm_dbg_kms(&i915->drm, | |
| "BIOS fb not suitable for all pipes, not using\n"); | |
| goto out; | |
| } | |
| ifbdev->preferred_bpp = fb->base.format->cpp[0] * 8; | |
| ifbdev->fb = fb; | |
| drm_framebuffer_get(&ifbdev->fb->base); | |
| /* Final pass to check if any active pipes don't have fbs */ | |
| for_each_intel_crtc(dev, crtc) { | |
| struct intel_crtc_state *crtc_state = | |
| to_intel_crtc_state(crtc->base.state); | |
| struct intel_plane *plane = | |
| to_intel_plane(crtc->base.primary); | |
| struct intel_plane_state *plane_state = | |
| to_intel_plane_state(plane->base.state); | |
| if (!crtc_state->uapi.active) | |
| continue; | |
| drm_WARN(dev, !plane_state->uapi.fb, | |
| "re-used BIOS config but lost an fb on [PLANE:%d:%s]\n", | |
| plane->base.base.id, plane->base.name); | |
| } | |
| drm_dbg_kms(&i915->drm, "using BIOS fb for initial console\n"); | |
| return true; | |
| out: | |
| return false; | |
| } | |
| static void intel_fbdev_suspend_worker(struct work_struct *work) | |
| { | |
| intel_fbdev_set_suspend(&container_of(work, | |
| struct drm_i915_private, | |
| display.fbdev.suspend_work)->drm, | |
| FBINFO_STATE_RUNNING, | |
| true); | |
| } | |
| /* Suspends/resumes fbdev processing of incoming HPD events. When resuming HPD | |
| * processing, fbdev will perform a full connector reprobe if a hotplug event | |
| * was received while HPD was suspended. | |
| */ | |
| static void intel_fbdev_hpd_set_suspend(struct drm_i915_private *i915, int state) | |
| { | |
| struct intel_fbdev *ifbdev = i915->display.fbdev.fbdev; | |
| bool send_hpd = false; | |
| mutex_lock(&ifbdev->hpd_lock); | |
| ifbdev->hpd_suspended = state == FBINFO_STATE_SUSPENDED; | |
| send_hpd = !ifbdev->hpd_suspended && ifbdev->hpd_waiting; | |
| ifbdev->hpd_waiting = false; | |
| mutex_unlock(&ifbdev->hpd_lock); | |
| if (send_hpd) { | |
| drm_dbg_kms(&i915->drm, "Handling delayed fbcon HPD event\n"); | |
| drm_fb_helper_hotplug_event(&ifbdev->helper); | |
| } | |
| } | |
| void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(dev); | |
| struct intel_fbdev *ifbdev = dev_priv->display.fbdev.fbdev; | |
| struct fb_info *info; | |
| if (!ifbdev) | |
| return; | |
| if (drm_WARN_ON(&dev_priv->drm, !HAS_DISPLAY(dev_priv))) | |
| return; | |
| if (!ifbdev->vma) | |
| goto set_suspend; | |
| info = ifbdev->helper.info; | |
| if (synchronous) { | |
| /* Flush any pending work to turn the console on, and then | |
| * wait to turn it off. It must be synchronous as we are | |
| * about to suspend or unload the driver. | |
| * | |
| * Note that from within the work-handler, we cannot flush | |
| * ourselves, so only flush outstanding work upon suspend! | |
| */ | |
| if (state != FBINFO_STATE_RUNNING) | |
| flush_work(&dev_priv->display.fbdev.suspend_work); | |
| console_lock(); | |
| } else { | |
| /* | |
| * The console lock can be pretty contented on resume due | |
| * to all the printk activity. Try to keep it out of the hot | |
| * path of resume if possible. | |
| */ | |
| drm_WARN_ON(dev, state != FBINFO_STATE_RUNNING); | |
| if (!console_trylock()) { | |
| /* Don't block our own workqueue as this can | |
| * be run in parallel with other i915.ko tasks. | |
| */ | |
| queue_work(dev_priv->unordered_wq, | |
| &dev_priv->display.fbdev.suspend_work); | |
| return; | |
| } | |
| } | |
| /* On resume from hibernation: If the object is shmemfs backed, it has | |
| * been restored from swap. If the object is stolen however, it will be | |
| * full of whatever garbage was left in there. | |
| */ | |
| if (state == FBINFO_STATE_RUNNING && | |
| !i915_gem_object_is_shmem(intel_fb_obj(&ifbdev->fb->base))) | |
| memset_io(info->screen_base, 0, info->screen_size); | |
| drm_fb_helper_set_suspend(&ifbdev->helper, state); | |
| console_unlock(); | |
| set_suspend: | |
| intel_fbdev_hpd_set_suspend(dev_priv, state); | |
| } | |
| static int intel_fbdev_output_poll_changed(struct drm_device *dev) | |
| { | |
| struct intel_fbdev *ifbdev = to_i915(dev)->display.fbdev.fbdev; | |
| bool send_hpd; | |
| if (!ifbdev) | |
| return -EINVAL; | |
| mutex_lock(&ifbdev->hpd_lock); | |
| send_hpd = !ifbdev->hpd_suspended; | |
| ifbdev->hpd_waiting = true; | |
| mutex_unlock(&ifbdev->hpd_lock); | |
| if (send_hpd && (ifbdev->vma || ifbdev->helper.deferred_setup)) | |
| drm_fb_helper_hotplug_event(&ifbdev->helper); | |
| return 0; | |
| } | |
| static int intel_fbdev_restore_mode(struct drm_i915_private *dev_priv) | |
| { | |
| struct intel_fbdev *ifbdev = dev_priv->display.fbdev.fbdev; | |
| int ret; | |
| if (!ifbdev) | |
| return -EINVAL; | |
| if (!ifbdev->vma) | |
| return -ENOMEM; | |
| ret = drm_fb_helper_restore_fbdev_mode_unlocked(&ifbdev->helper); | |
| if (ret) | |
| return ret; | |
| intel_fbdev_invalidate(ifbdev); | |
| return 0; | |
| } | |
| /* | |
| * Fbdev client and struct drm_client_funcs | |
| */ | |
| static void intel_fbdev_client_unregister(struct drm_client_dev *client) | |
| { | |
| struct drm_fb_helper *fb_helper = drm_fb_helper_from_client(client); | |
| struct drm_device *dev = fb_helper->dev; | |
| struct pci_dev *pdev = to_pci_dev(dev->dev); | |
| if (fb_helper->info) { | |
| vga_switcheroo_client_fb_set(pdev, NULL); | |
| drm_fb_helper_unregister_info(fb_helper); | |
| } else { | |
| drm_fb_helper_unprepare(fb_helper); | |
| drm_client_release(&fb_helper->client); | |
| kfree(fb_helper); | |
| } | |
| } | |
| static int intel_fbdev_client_restore(struct drm_client_dev *client) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(client->dev); | |
| int ret; | |
| ret = intel_fbdev_restore_mode(dev_priv); | |
| if (ret) | |
| return ret; | |
| vga_switcheroo_process_delayed_switch(); | |
| return 0; | |
| } | |
| static int intel_fbdev_client_hotplug(struct drm_client_dev *client) | |
| { | |
| struct drm_fb_helper *fb_helper = drm_fb_helper_from_client(client); | |
| struct drm_device *dev = client->dev; | |
| struct pci_dev *pdev = to_pci_dev(dev->dev); | |
| int ret; | |
| if (dev->fb_helper) | |
| return intel_fbdev_output_poll_changed(dev); | |
| ret = drm_fb_helper_init(dev, fb_helper); | |
| if (ret) | |
| goto err_drm_err; | |
| ret = drm_fb_helper_initial_config(fb_helper); | |
| if (ret) | |
| goto err_drm_fb_helper_fini; | |
| vga_switcheroo_client_fb_set(pdev, fb_helper->info); | |
| return 0; | |
| err_drm_fb_helper_fini: | |
| drm_fb_helper_fini(fb_helper); | |
| err_drm_err: | |
| drm_err(dev, "Failed to setup i915 fbdev emulation (ret=%d)\n", ret); | |
| return ret; | |
| } | |
| static const struct drm_client_funcs intel_fbdev_client_funcs = { | |
| .owner = THIS_MODULE, | |
| .unregister = intel_fbdev_client_unregister, | |
| .restore = intel_fbdev_client_restore, | |
| .hotplug = intel_fbdev_client_hotplug, | |
| }; | |
| void intel_fbdev_setup(struct drm_i915_private *i915) | |
| { | |
| struct drm_device *dev = &i915->drm; | |
| struct intel_fbdev *ifbdev; | |
| int ret; | |
| if (!HAS_DISPLAY(i915)) | |
| return; | |
| ifbdev = kzalloc(sizeof(*ifbdev), GFP_KERNEL); | |
| if (!ifbdev) | |
| return; | |
| drm_fb_helper_prepare(dev, &ifbdev->helper, 32, &intel_fb_helper_funcs); | |
| i915->display.fbdev.fbdev = ifbdev; | |
| INIT_WORK(&i915->display.fbdev.suspend_work, intel_fbdev_suspend_worker); | |
| mutex_init(&ifbdev->hpd_lock); | |
| if (intel_fbdev_init_bios(dev, ifbdev)) | |
| ifbdev->helper.preferred_bpp = ifbdev->preferred_bpp; | |
| else | |
| ifbdev->preferred_bpp = ifbdev->helper.preferred_bpp; | |
| ret = drm_client_init(dev, &ifbdev->helper.client, "intel-fbdev", | |
| &intel_fbdev_client_funcs); | |
| if (ret) { | |
| drm_err(dev, "Failed to register client: %d\n", ret); | |
| goto err_drm_fb_helper_unprepare; | |
| } | |
| drm_client_register(&ifbdev->helper.client); | |
| return; | |
| err_drm_fb_helper_unprepare: | |
| drm_fb_helper_unprepare(&ifbdev->helper); | |
| mutex_destroy(&ifbdev->hpd_lock); | |
| kfree(ifbdev); | |
| } | |
| struct intel_framebuffer *intel_fbdev_framebuffer(struct intel_fbdev *fbdev) | |
| { | |
| if (!fbdev || !fbdev->helper.fb) | |
| return NULL; | |
| return to_intel_framebuffer(fbdev->helper.fb); | |
| } |