| // SPDX-License-Identifier: ISC | |
| /* Copyright (C) 2020 MediaTek Inc. */ | |
| #include <linux/etherdevice.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/hwmon-sysfs.h> | |
| #include <linux/thermal.h> | |
| #include <linux/firmware.h> | |
| #include "mt7921.h" | |
| #include "../mt76_connac2_mac.h" | |
| #include "mcu.h" | |
| static ssize_t mt7921_thermal_temp_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| switch (to_sensor_dev_attr(attr)->index) { | |
| case 0: { | |
| struct mt792x_phy *phy = dev_get_drvdata(dev); | |
| struct mt792x_dev *mdev = phy->dev; | |
| int temperature; | |
| mt792x_mutex_acquire(mdev); | |
| temperature = mt7921_mcu_get_temperature(phy); | |
| mt792x_mutex_release(mdev); | |
| if (temperature < 0) | |
| return temperature; | |
| /* display in millidegree Celsius */ | |
| return sprintf(buf, "%u\n", temperature * 1000); | |
| } | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static SENSOR_DEVICE_ATTR_RO(temp1_input, mt7921_thermal_temp, 0); | |
| static struct attribute *mt7921_hwmon_attrs[] = { | |
| &sensor_dev_attr_temp1_input.dev_attr.attr, | |
| NULL, | |
| }; | |
| ATTRIBUTE_GROUPS(mt7921_hwmon); | |
| static int mt7921_thermal_init(struct mt792x_phy *phy) | |
| { | |
| struct wiphy *wiphy = phy->mt76->hw->wiphy; | |
| struct device *hwmon; | |
| const char *name; | |
| if (!IS_REACHABLE(CONFIG_HWMON)) | |
| return 0; | |
| name = devm_kasprintf(&wiphy->dev, GFP_KERNEL, "mt7921_%s", | |
| wiphy_name(wiphy)); | |
| if (!name) | |
| return -ENOMEM; | |
| hwmon = devm_hwmon_device_register_with_groups(&wiphy->dev, name, phy, | |
| mt7921_hwmon_groups); | |
| return PTR_ERR_OR_ZERO(hwmon); | |
| } | |
| static void | |
| mt7921_regd_channel_update(struct wiphy *wiphy, struct mt792x_dev *dev) | |
| { | |
| #define IS_UNII_INVALID(idx, sfreq, efreq) \ | |
| (!(dev->phy.clc_chan_conf & BIT(idx)) && (cfreq) >= (sfreq) && (cfreq) <= (efreq)) | |
| struct ieee80211_supported_band *sband; | |
| struct mt76_dev *mdev = &dev->mt76; | |
| struct device_node *np, *band_np; | |
| struct ieee80211_channel *ch; | |
| int i, cfreq; | |
| np = mt76_find_power_limits_node(mdev); | |
| sband = wiphy->bands[NL80211_BAND_5GHZ]; | |
| band_np = np ? of_get_child_by_name(np, "txpower-5g") : NULL; | |
| for (i = 0; i < sband->n_channels; i++) { | |
| ch = &sband->channels[i]; | |
| cfreq = ch->center_freq; | |
| if (np && (!band_np || !mt76_find_channel_node(band_np, ch))) { | |
| ch->flags |= IEEE80211_CHAN_DISABLED; | |
| continue; | |
| } | |
| /* UNII-4 */ | |
| if (IS_UNII_INVALID(0, 5845, 5925)) | |
| ch->flags |= IEEE80211_CHAN_DISABLED; | |
| } | |
| sband = wiphy->bands[NL80211_BAND_6GHZ]; | |
| if (!sband) | |
| return; | |
| band_np = np ? of_get_child_by_name(np, "txpower-6g") : NULL; | |
| for (i = 0; i < sband->n_channels; i++) { | |
| ch = &sband->channels[i]; | |
| cfreq = ch->center_freq; | |
| if (np && (!band_np || !mt76_find_channel_node(band_np, ch))) { | |
| ch->flags |= IEEE80211_CHAN_DISABLED; | |
| continue; | |
| } | |
| /* UNII-5/6/7/8 */ | |
| if (IS_UNII_INVALID(1, 5925, 6425) || | |
| IS_UNII_INVALID(2, 6425, 6525) || | |
| IS_UNII_INVALID(3, 6525, 6875) || | |
| IS_UNII_INVALID(4, 6875, 7125)) | |
| ch->flags |= IEEE80211_CHAN_DISABLED; | |
| } | |
| } | |
| void mt7921_regd_update(struct mt792x_dev *dev) | |
| { | |
| struct mt76_dev *mdev = &dev->mt76; | |
| struct ieee80211_hw *hw = mdev->hw; | |
| struct wiphy *wiphy = hw->wiphy; | |
| mt7921_mcu_set_clc(dev, mdev->alpha2, dev->country_ie_env); | |
| mt7921_regd_channel_update(wiphy, dev); | |
| mt76_connac_mcu_set_channel_domain(hw->priv); | |
| mt7921_set_tx_sar_pwr(hw, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(mt7921_regd_update); | |
| static void | |
| mt7921_regd_notifier(struct wiphy *wiphy, | |
| struct regulatory_request *request) | |
| { | |
| struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); | |
| struct mt792x_dev *dev = mt792x_hw_dev(hw); | |
| struct mt76_connac_pm *pm = &dev->pm; | |
| memcpy(dev->mt76.alpha2, request->alpha2, sizeof(dev->mt76.alpha2)); | |
| dev->mt76.region = request->dfs_region; | |
| dev->country_ie_env = request->country_ie_env; | |
| if (pm->suspended) | |
| return; | |
| dev->regd_in_progress = true; | |
| mt792x_mutex_acquire(dev); | |
| mt7921_regd_update(dev); | |
| mt792x_mutex_release(dev); | |
| dev->regd_in_progress = false; | |
| wake_up(&dev->wait); | |
| } | |
| int mt7921_mac_init(struct mt792x_dev *dev) | |
| { | |
| int i; | |
| mt76_rmw_field(dev, MT_MDP_DCR1, MT_MDP_DCR1_MAX_RX_LEN, 1536); | |
| /* enable hardware de-agg */ | |
| mt76_set(dev, MT_MDP_DCR0, MT_MDP_DCR0_DAMSDU_EN); | |
| /* enable hardware rx header translation */ | |
| mt76_set(dev, MT_MDP_DCR0, MT_MDP_DCR0_RX_HDR_TRANS_EN); | |
| for (i = 0; i < MT792x_WTBL_SIZE; i++) | |
| mt7921_mac_wtbl_update(dev, i, | |
| MT_WTBL_UPDATE_ADM_COUNT_CLEAR); | |
| for (i = 0; i < 2; i++) | |
| mt792x_mac_init_band(dev, i); | |
| return mt76_connac_mcu_set_rts_thresh(&dev->mt76, 0x92b, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(mt7921_mac_init); | |
| static int __mt7921_init_hardware(struct mt792x_dev *dev) | |
| { | |
| int ret; | |
| /* force firmware operation mode into normal state, | |
| * which should be set before firmware download stage. | |
| */ | |
| mt76_wr(dev, MT_SWDEF_MODE, MT_SWDEF_NORMAL_MODE); | |
| ret = mt792x_mcu_init(dev); | |
| if (ret) | |
| goto out; | |
| mt76_eeprom_override(&dev->mphy); | |
| ret = mt7921_mcu_set_eeprom(dev); | |
| if (ret) | |
| goto out; | |
| ret = mt7921_mac_init(dev); | |
| out: | |
| return ret; | |
| } | |
| static int mt7921_init_hardware(struct mt792x_dev *dev) | |
| { | |
| int ret, i; | |
| set_bit(MT76_STATE_INITIALIZED, &dev->mphy.state); | |
| for (i = 0; i < MT792x_MCU_INIT_RETRY_COUNT; i++) { | |
| ret = __mt7921_init_hardware(dev); | |
| if (!ret) | |
| break; | |
| mt792x_init_reset(dev); | |
| } | |
| if (i == MT792x_MCU_INIT_RETRY_COUNT) { | |
| dev_err(dev->mt76.dev, "hardware init failed\n"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void mt7921_init_work(struct work_struct *work) | |
| { | |
| struct mt792x_dev *dev = container_of(work, struct mt792x_dev, | |
| init_work); | |
| int ret; | |
| ret = mt7921_init_hardware(dev); | |
| if (ret) | |
| return; | |
| mt76_set_stream_caps(&dev->mphy, true); | |
| mt7921_set_stream_he_caps(&dev->phy); | |
| ret = mt76_register_device(&dev->mt76, true, mt76_rates, | |
| ARRAY_SIZE(mt76_rates)); | |
| if (ret) { | |
| dev_err(dev->mt76.dev, "register device failed\n"); | |
| return; | |
| } | |
| ret = mt7921_init_debugfs(dev); | |
| if (ret) { | |
| dev_err(dev->mt76.dev, "register debugfs failed\n"); | |
| return; | |
| } | |
| ret = mt7921_thermal_init(&dev->phy); | |
| if (ret) { | |
| dev_err(dev->mt76.dev, "thermal init failed\n"); | |
| return; | |
| } | |
| /* we support chip reset now */ | |
| dev->hw_init_done = true; | |
| mt76_connac_mcu_set_deep_sleep(&dev->mt76, dev->pm.ds_enable); | |
| } | |
| int mt7921_register_device(struct mt792x_dev *dev) | |
| { | |
| struct ieee80211_hw *hw = mt76_hw(dev); | |
| int ret; | |
| dev->phy.dev = dev; | |
| dev->phy.mt76 = &dev->mt76.phy; | |
| dev->mt76.phy.priv = &dev->phy; | |
| dev->mt76.tx_worker.fn = mt792x_tx_worker; | |
| INIT_DELAYED_WORK(&dev->pm.ps_work, mt792x_pm_power_save_work); | |
| INIT_WORK(&dev->pm.wake_work, mt792x_pm_wake_work); | |
| spin_lock_init(&dev->pm.wake.lock); | |
| mutex_init(&dev->pm.mutex); | |
| init_waitqueue_head(&dev->pm.wait); | |
| init_waitqueue_head(&dev->wait); | |
| if (mt76_is_sdio(&dev->mt76)) | |
| init_waitqueue_head(&dev->mt76.sdio.wait); | |
| spin_lock_init(&dev->pm.txq_lock); | |
| INIT_DELAYED_WORK(&dev->mphy.mac_work, mt792x_mac_work); | |
| INIT_DELAYED_WORK(&dev->phy.scan_work, mt7921_scan_work); | |
| INIT_DELAYED_WORK(&dev->coredump.work, mt7921_coredump_work); | |
| #if IS_ENABLED(CONFIG_IPV6) | |
| INIT_WORK(&dev->ipv6_ns_work, mt7921_set_ipv6_ns_work); | |
| skb_queue_head_init(&dev->ipv6_ns_list); | |
| #endif | |
| skb_queue_head_init(&dev->phy.scan_event_list); | |
| skb_queue_head_init(&dev->coredump.msg_list); | |
| INIT_WORK(&dev->reset_work, mt7921_mac_reset_work); | |
| INIT_WORK(&dev->init_work, mt7921_init_work); | |
| INIT_WORK(&dev->phy.roc_work, mt7921_roc_work); | |
| timer_setup(&dev->phy.roc_timer, mt792x_roc_timer, 0); | |
| init_waitqueue_head(&dev->phy.roc_wait); | |
| dev->pm.idle_timeout = MT792x_PM_TIMEOUT; | |
| dev->pm.stats.last_wake_event = jiffies; | |
| dev->pm.stats.last_doze_event = jiffies; | |
| if (!mt76_is_usb(&dev->mt76)) { | |
| dev->pm.enable_user = true; | |
| dev->pm.enable = true; | |
| dev->pm.ds_enable_user = true; | |
| dev->pm.ds_enable = true; | |
| } | |
| if (!mt76_is_mmio(&dev->mt76)) | |
| hw->extra_tx_headroom += MT_SDIO_TXD_SIZE + MT_SDIO_HDR_SIZE; | |
| mt792x_init_acpi_sar(dev); | |
| ret = mt792x_init_wcid(dev); | |
| if (ret) | |
| return ret; | |
| ret = mt792x_init_wiphy(hw); | |
| if (ret) | |
| return ret; | |
| hw->wiphy->reg_notifier = mt7921_regd_notifier; | |
| dev->mphy.sband_2g.sband.ht_cap.cap |= | |
| IEEE80211_HT_CAP_LDPC_CODING | | |
| IEEE80211_HT_CAP_MAX_AMSDU; | |
| dev->mphy.sband_5g.sband.ht_cap.cap |= | |
| IEEE80211_HT_CAP_LDPC_CODING | | |
| IEEE80211_HT_CAP_MAX_AMSDU; | |
| dev->mphy.sband_5g.sband.vht_cap.cap |= | |
| IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 | | |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK | | |
| IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | |
| IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE | | |
| (3 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT); | |
| if (is_mt7922(&dev->mt76)) | |
| dev->mphy.sband_5g.sband.vht_cap.cap |= | |
| IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ | | |
| IEEE80211_VHT_CAP_SHORT_GI_160; | |
| dev->mphy.hw->wiphy->available_antennas_rx = dev->mphy.chainmask; | |
| dev->mphy.hw->wiphy->available_antennas_tx = dev->mphy.chainmask; | |
| queue_work(system_wq, &dev->init_work); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(mt7921_register_device); |