| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (C) 2017 Pengutronix, Juergen Borleis <jbe@pengutronix.de> | |
| */ | |
| #include <linux/dsa/lan9303.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/list.h> | |
| #include <linux/slab.h> | |
| #include "tag.h" | |
| /* To define the outgoing port and to discover the incoming port a regular | |
| * VLAN tag is used by the LAN9303. But its VID meaning is 'special': | |
| * | |
| * Dest MAC Src MAC TAG Type | |
| * ...| 1 2 3 4 5 6 | 1 2 3 4 5 6 | 1 2 3 4 | 1 2 |... | |
| * |<------->| | |
| * TAG: | |
| * |<------------->| | |
| * | 1 2 | 3 4 | | |
| * TPID VID | |
| * 0x8100 | |
| * | |
| * VID bit 3 indicates a request for an ALR lookup. | |
| * | |
| * If VID bit 3 is zero, then bits 0 and 1 specify the destination port | |
| * (0, 1, 2) or broadcast (3) or the source port (1, 2). | |
| * | |
| * VID bit 4 is used to specify if the STP port state should be overridden. | |
| * Required when no forwarding between the external ports should happen. | |
| */ | |
| #define LAN9303_NAME "lan9303" | |
| #define LAN9303_TAG_LEN 4 | |
| # define LAN9303_TAG_TX_USE_ALR BIT(3) | |
| # define LAN9303_TAG_TX_STP_OVERRIDE BIT(4) | |
| # define LAN9303_TAG_RX_IGMP BIT(3) | |
| # define LAN9303_TAG_RX_STP BIT(4) | |
| # define LAN9303_TAG_RX_TRAPPED_TO_CPU (LAN9303_TAG_RX_IGMP | \ | |
| LAN9303_TAG_RX_STP) | |
| /* Decide whether to transmit using ALR lookup, or transmit directly to | |
| * port using tag. ALR learning is performed only when using ALR lookup. | |
| * If the two external ports are bridged and the frame is unicast, | |
| * then use ALR lookup to allow ALR learning on CPU port. | |
| * Otherwise transmit directly to port with STP state override. | |
| * See also: lan9303_separate_ports() and lan9303.pdf 6.4.10.1 | |
| */ | |
| static int lan9303_xmit_use_arl(struct dsa_port *dp, u8 *dest_addr) | |
| { | |
| struct lan9303 *chip = dp->ds->priv; | |
| return chip->is_bridged && !is_multicast_ether_addr(dest_addr); | |
| } | |
| static struct sk_buff *lan9303_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct dsa_port *dp = dsa_user_to_port(dev); | |
| __be16 *lan9303_tag; | |
| u16 tag; | |
| /* provide 'LAN9303_TAG_LEN' bytes additional space */ | |
| skb_push(skb, LAN9303_TAG_LEN); | |
| /* make room between MACs and Ether-Type */ | |
| dsa_alloc_etype_header(skb, LAN9303_TAG_LEN); | |
| lan9303_tag = dsa_etype_header_pos_tx(skb); | |
| tag = lan9303_xmit_use_arl(dp, skb->data) ? | |
| LAN9303_TAG_TX_USE_ALR : | |
| dp->index | LAN9303_TAG_TX_STP_OVERRIDE; | |
| lan9303_tag[0] = htons(ETH_P_8021Q); | |
| lan9303_tag[1] = htons(tag); | |
| return skb; | |
| } | |
| static struct sk_buff *lan9303_rcv(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| u16 lan9303_tag1; | |
| unsigned int source_port; | |
| if (unlikely(!pskb_may_pull(skb, LAN9303_TAG_LEN))) { | |
| dev_warn_ratelimited(&dev->dev, | |
| "Dropping packet, cannot pull\n"); | |
| return NULL; | |
| } | |
| if (skb_vlan_tag_present(skb)) { | |
| lan9303_tag1 = skb_vlan_tag_get(skb); | |
| __vlan_hwaccel_clear_tag(skb); | |
| } else { | |
| skb_push_rcsum(skb, ETH_HLEN); | |
| __skb_vlan_pop(skb, &lan9303_tag1); | |
| skb_pull_rcsum(skb, ETH_HLEN); | |
| } | |
| source_port = lan9303_tag1 & 0x3; | |
| skb->dev = dsa_conduit_find_user(dev, 0, source_port); | |
| if (!skb->dev) { | |
| dev_warn_ratelimited(&dev->dev, "Dropping packet due to invalid source port\n"); | |
| return NULL; | |
| } | |
| if (!(lan9303_tag1 & LAN9303_TAG_RX_TRAPPED_TO_CPU)) | |
| dsa_default_offload_fwd_mark(skb); | |
| return skb; | |
| } | |
| static const struct dsa_device_ops lan9303_netdev_ops = { | |
| .name = LAN9303_NAME, | |
| .proto = DSA_TAG_PROTO_LAN9303, | |
| .xmit = lan9303_xmit, | |
| .rcv = lan9303_rcv, | |
| .needed_headroom = LAN9303_TAG_LEN, | |
| }; | |
| MODULE_DESCRIPTION("DSA tag driver for SMSC/Microchip LAN9303 family of switches"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_LAN9303, LAN9303_NAME); | |
| module_dsa_tag_driver(lan9303_netdev_ops); |