| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Watchdog driver for the K3 RTI module |
| * |
| * (c) Copyright 2019-2020 Texas Instruments Inc. |
| * All rights reserved. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/types.h> |
| #include <linux/watchdog.h> |
| |
| #define DEFAULT_HEARTBEAT 60 |
| |
| /* Max heartbeat is calculated at 32kHz source clock */ |
| #define MAX_HEARTBEAT 1000 |
| |
| /* Timer register set definition */ |
| #define RTIDWDCTRL 0x90 |
| #define RTIDWDPRLD 0x94 |
| #define RTIWDSTATUS 0x98 |
| #define RTIWDKEY 0x9c |
| #define RTIDWDCNTR 0xa0 |
| #define RTIWWDRXCTRL 0xa4 |
| #define RTIWWDSIZECTRL 0xa8 |
| |
| #define RTIWWDRX_NMI 0xa |
| |
| #define RTIWWDSIZE_50P 0x50 |
| #define RTIWWDSIZE_25P 0x500 |
| #define RTIWWDSIZE_12P5 0x5000 |
| #define RTIWWDSIZE_6P25 0x50000 |
| #define RTIWWDSIZE_3P125 0x500000 |
| |
| #define WDENABLE_KEY 0xa98559da |
| |
| #define WDKEY_SEQ0 0xe51a |
| #define WDKEY_SEQ1 0xa35c |
| |
| #define WDT_PRELOAD_SHIFT 13 |
| |
| #define WDT_PRELOAD_MAX 0xfff |
| |
| #define DWDST BIT(1) |
| |
| static int heartbeat = DEFAULT_HEARTBEAT; |
| |
| /* |
| * struct to hold data for each WDT device |
| * @base - base io address of WD device |
| * @freq - source clock frequency of WDT |
| * @wdd - hold watchdog device as is in WDT core |
| */ |
| struct rti_wdt_device { |
| void __iomem *base; |
| unsigned long freq; |
| struct watchdog_device wdd; |
| }; |
| |
| static int rti_wdt_start(struct watchdog_device *wdd) |
| { |
| u32 timer_margin; |
| struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd); |
| |
| /* set timeout period */ |
| timer_margin = (u64)wdd->timeout * wdt->freq; |
| timer_margin >>= WDT_PRELOAD_SHIFT; |
| if (timer_margin > WDT_PRELOAD_MAX) |
| timer_margin = WDT_PRELOAD_MAX; |
| writel_relaxed(timer_margin, wdt->base + RTIDWDPRLD); |
| |
| /* |
| * RTI only supports a windowed mode, where the watchdog can only |
| * be petted during the open window; not too early or not too late. |
| * The HW configuration options only allow for the open window size |
| * to be 50% or less than that; we obviouly want to configure the open |
| * window as large as possible so we select the 50% option. |
| */ |
| wdd->min_hw_heartbeat_ms = 500 * wdd->timeout; |
| |
| /* Generate NMI when wdt expires */ |
| writel_relaxed(RTIWWDRX_NMI, wdt->base + RTIWWDRXCTRL); |
| |
| /* Open window size 50%; this is the largest window size available */ |
| writel_relaxed(RTIWWDSIZE_50P, wdt->base + RTIWWDSIZECTRL); |
| |
| readl_relaxed(wdt->base + RTIWWDSIZECTRL); |
| |
| /* enable watchdog */ |
| writel_relaxed(WDENABLE_KEY, wdt->base + RTIDWDCTRL); |
| return 0; |
| } |
| |
| static int rti_wdt_ping(struct watchdog_device *wdd) |
| { |
| struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd); |
| |
| /* put watchdog in service state */ |
| writel_relaxed(WDKEY_SEQ0, wdt->base + RTIWDKEY); |
| /* put watchdog in active state */ |
| writel_relaxed(WDKEY_SEQ1, wdt->base + RTIWDKEY); |
| |
| return 0; |
| } |
| |
| static int rti_wdt_setup_hw_hb(struct watchdog_device *wdd, u32 wsize) |
| { |
| /* |
| * RTI only supports a windowed mode, where the watchdog can only |
| * be petted during the open window; not too early or not too late. |
| * The HW configuration options only allow for the open window size |
| * to be 50% or less than that. |
| */ |
| switch (wsize) { |
| case RTIWWDSIZE_50P: |
| /* 50% open window => 50% min heartbeat */ |
| wdd->min_hw_heartbeat_ms = 500 * heartbeat; |
| break; |
| |
| case RTIWWDSIZE_25P: |
| /* 25% open window => 75% min heartbeat */ |
| wdd->min_hw_heartbeat_ms = 750 * heartbeat; |
| break; |
| |
| case RTIWWDSIZE_12P5: |
| /* 12.5% open window => 87.5% min heartbeat */ |
| wdd->min_hw_heartbeat_ms = 875 * heartbeat; |
| break; |
| |
| case RTIWWDSIZE_6P25: |
| /* 6.5% open window => 93.5% min heartbeat */ |
| wdd->min_hw_heartbeat_ms = 935 * heartbeat; |
| break; |
| |
| case RTIWWDSIZE_3P125: |
| /* 3.125% open window => 96.9% min heartbeat */ |
| wdd->min_hw_heartbeat_ms = 969 * heartbeat; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int rti_wdt_get_timeleft_ms(struct watchdog_device *wdd) |
| { |
| u64 timer_counter; |
| u32 val; |
| struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd); |
| |
| /* if timeout has occurred then return 0 */ |
| val = readl_relaxed(wdt->base + RTIWDSTATUS); |
| if (val & DWDST) |
| return 0; |
| |
| timer_counter = readl_relaxed(wdt->base + RTIDWDCNTR); |
| |
| timer_counter *= 1000; |
| |
| do_div(timer_counter, wdt->freq); |
| |
| return timer_counter; |
| } |
| |
| static unsigned int rti_wdt_get_timeleft(struct watchdog_device *wdd) |
| { |
| return rti_wdt_get_timeleft_ms(wdd) / 1000; |
| } |
| |
| static const struct watchdog_info rti_wdt_info = { |
| .options = WDIOF_KEEPALIVEPING, |
| .identity = "K3 RTI Watchdog", |
| }; |
| |
| static const struct watchdog_ops rti_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = rti_wdt_start, |
| .ping = rti_wdt_ping, |
| .get_timeleft = rti_wdt_get_timeleft, |
| }; |
| |
| static int rti_wdt_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| struct device *dev = &pdev->dev; |
| struct watchdog_device *wdd; |
| struct rti_wdt_device *wdt; |
| struct clk *clk; |
| u32 last_ping = 0; |
| |
| wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); |
| if (!wdt) |
| return -ENOMEM; |
| |
| clk = clk_get(dev, NULL); |
| if (IS_ERR(clk)) |
| return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n"); |
| |
| wdt->freq = clk_get_rate(clk); |
| |
| clk_put(clk); |
| |
| if (!wdt->freq) { |
| dev_err(dev, "Failed to get fck rate.\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * If watchdog is running at 32k clock, it is not accurate. |
| * Adjust frequency down in this case so that we don't pet |
| * the watchdog too often. |
| */ |
| if (wdt->freq < 32768) |
| wdt->freq = wdt->freq * 9 / 10; |
| |
| pm_runtime_enable(dev); |
| ret = pm_runtime_get_sync(dev); |
| if (ret < 0) { |
| pm_runtime_put_noidle(dev); |
| pm_runtime_disable(&pdev->dev); |
| return dev_err_probe(dev, ret, "runtime pm failed\n"); |
| } |
| |
| platform_set_drvdata(pdev, wdt); |
| |
| wdd = &wdt->wdd; |
| wdd->info = &rti_wdt_info; |
| wdd->ops = &rti_wdt_ops; |
| wdd->min_timeout = 1; |
| wdd->max_hw_heartbeat_ms = (WDT_PRELOAD_MAX << WDT_PRELOAD_SHIFT) / |
| wdt->freq * 1000; |
| wdd->parent = dev; |
| |
| watchdog_set_drvdata(wdd, wdt); |
| watchdog_set_nowayout(wdd, 1); |
| watchdog_set_restart_priority(wdd, 128); |
| |
| wdt->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(wdt->base)) { |
| ret = PTR_ERR(wdt->base); |
| goto err_iomap; |
| } |
| |
| if (readl(wdt->base + RTIDWDCTRL) == WDENABLE_KEY) { |
| int preset_heartbeat; |
| u32 time_left_ms; |
| u64 heartbeat_ms; |
| u32 wsize; |
| |
| set_bit(WDOG_HW_RUNNING, &wdd->status); |
| time_left_ms = rti_wdt_get_timeleft_ms(wdd); |
| heartbeat_ms = readl(wdt->base + RTIDWDPRLD); |
| heartbeat_ms <<= WDT_PRELOAD_SHIFT; |
| heartbeat_ms *= 1000; |
| do_div(heartbeat_ms, wdt->freq); |
| preset_heartbeat = heartbeat_ms + 500; |
| preset_heartbeat /= 1000; |
| if (preset_heartbeat != heartbeat) |
| dev_warn(dev, "watchdog already running, ignoring heartbeat config!\n"); |
| |
| heartbeat = preset_heartbeat; |
| |
| wsize = readl(wdt->base + RTIWWDSIZECTRL); |
| ret = rti_wdt_setup_hw_hb(wdd, wsize); |
| if (ret) { |
| dev_err(dev, "bad window size.\n"); |
| goto err_iomap; |
| } |
| |
| last_ping = heartbeat_ms - time_left_ms; |
| if (time_left_ms > heartbeat_ms) { |
| dev_warn(dev, "time_left > heartbeat? Assuming last ping just before now.\n"); |
| last_ping = 0; |
| } |
| } |
| |
| watchdog_init_timeout(wdd, heartbeat, dev); |
| |
| ret = watchdog_register_device(wdd); |
| if (ret) { |
| dev_err(dev, "cannot register watchdog device\n"); |
| goto err_iomap; |
| } |
| |
| if (last_ping) |
| watchdog_set_last_hw_keepalive(wdd, last_ping); |
| |
| return 0; |
| |
| err_iomap: |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| return ret; |
| } |
| |
| static int rti_wdt_remove(struct platform_device *pdev) |
| { |
| struct rti_wdt_device *wdt = platform_get_drvdata(pdev); |
| |
| watchdog_unregister_device(&wdt->wdd); |
| pm_runtime_put(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id rti_wdt_of_match[] = { |
| { .compatible = "ti,j7-rti-wdt", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, rti_wdt_of_match); |
| |
| static struct platform_driver rti_wdt_driver = { |
| .driver = { |
| .name = "rti-wdt", |
| .of_match_table = rti_wdt_of_match, |
| }, |
| .probe = rti_wdt_probe, |
| .remove = rti_wdt_remove, |
| }; |
| |
| module_platform_driver(rti_wdt_driver); |
| |
| MODULE_AUTHOR("Tero Kristo <t-kristo@ti.com>"); |
| MODULE_DESCRIPTION("K3 RTI Watchdog Driver"); |
| |
| module_param(heartbeat, int, 0); |
| MODULE_PARM_DESC(heartbeat, |
| "Watchdog heartbeat period in seconds from 1 to " |
| __MODULE_STRING(MAX_HEARTBEAT) ", default " |
| __MODULE_STRING(DEFAULT_HEARTBEAT)); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:rti-wdt"); |