arch/riscv/Kconfig - linux - Git at Google

 # SPDX-License-Identifier: GPL-2.0-only
 #
 # For a description of the syntax of this configuration file,
 # see Documentation/kbuild/kconfig-language.rst.
 #

 config 64BIT
 	bool

 config 32BIT
 	bool

 config RISCV
 	def_bool y
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
 	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
 	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
 	select ARCH_HAS_BINFMT_FLAT
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DEBUG_WX
 	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_MMIOWB
 	select ARCH_HAS_PMEM_API
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SET_DIRECT_MAP if MMU
 	select ARCH_HAS_SET_MEMORY if MMU
 	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
 	select ARCH_HAS_STRICT_MODULE_RWX if MMU && !XIP_KERNEL
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
 	select ARCH_STACKWALK
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_DEBUG_PAGEALLOC if MMU
 	select ARCH_SUPPORTS_HUGETLBFS if MMU
 	select ARCH_SUPPORTS_PAGE_TABLE_CHECK if MMU
 	select ARCH_USE_MEMTEST
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
 	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
 	select ARCH_WANT_LD_ORPHAN_WARN if !XIP_KERNEL
 	select ARCH_WANTS_THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select BINFMT_FLAT_NO_DATA_START_OFFSET if !MMU
 	select BUILDTIME_TABLE_SORT if MMU
 	select CLINT_TIMER if !MMU
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select CPU_PM if CPU_IDLE
 	select EDAC_SUPPORT
 	select GENERIC_ARCH_TOPOLOGY
 	select GENERIC_ATOMIC64 if !64BIT
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IOREMAP if MMU
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
 	select GENERIC_LIB_DEVMEM_IS_ALLOWED
 	select GENERIC_PCI_IOMAP
 	select GENERIC_PTDUMP if MMU
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL if MMU && 64BIT
 	select GENERIC_VDSO_TIME_NS if HAVE_GENERIC_VDSO
 	select HARDIRQS_SW_RESEND
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP
 	select HAVE_ARCH_HUGE_VMAP if MMU && 64BIT && !XIP_KERNEL
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_JUMP_LABEL_RELATIVE if !XIP_KERNEL
 	select HAVE_ARCH_KASAN if MMU && 64BIT
 	select HAVE_ARCH_KASAN_VMALLOC if MMU && 64BIT
 	select HAVE_ARCH_KFENCE if MMU && 64BIT
 	select HAVE_ARCH_KGDB if !XIP_KERNEL
 	select HAVE_ARCH_KGDB_QXFER_PKT
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT && MMU
 	select HAVE_ARCH_VMAP_STACK if MMU && 64BIT
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_CONTEXT_TRACKING_USER
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_EBPF_JIT if MMU
 	select HAVE_FUNCTION_ARG_ACCESS_API
 	select HAVE_FUNCTION_ERROR_INJECTION
 	select HAVE_GCC_PLUGINS
 	select HAVE_GENERIC_VDSO if MMU && 64BIT
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KPROBES if !XIP_KERNEL
 	select HAVE_KPROBES_ON_FTRACE if !XIP_KERNEL
 	select HAVE_KRETPROBES if !XIP_KERNEL
 	select HAVE_RETHOOK if !XIP_KERNEL
 	select HAVE_MOVE_PMD
 	select HAVE_MOVE_PUD
 	select HAVE_PCI
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_POSIX_CPU_TIMERS_TASK_WORK
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RSEQ
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
 	select MODULES_USE_ELF_RELA if MODULES
 	select MODULE_SECTIONS if MODULES
 	select OF
 	select OF_DMA_DEFAULT_COHERENT
 	select OF_EARLY_FLATTREE
 	select OF_IRQ
 	select PCI_DOMAINS_GENERIC if PCI
 	select PCI_MSI if PCI
 	select RISCV_INTC
 	select RISCV_TIMER if RISCV_SBI
 	select SIFIVE_PLIC
 	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
 	select THREAD_INFO_IN_TASK
 	select TRACE_IRQFLAGS_SUPPORT
 	select UACCESS_MEMCPY if !MMU
 	select ZONE_DMA32 if 64BIT
 	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && MMU && $(cc-option,-fpatchable-function-entry=8)
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL && !PREEMPTION

 config ARCH_MMAP_RND_BITS_MIN
 	default 18 if 64BIT
 	default 8

 config ARCH_MMAP_RND_COMPAT_BITS_MIN
 	default 8

 # max bits determined by the following formula:
 #  VA_BITS - PAGE_SHIFT - 3
 config ARCH_MMAP_RND_BITS_MAX
 	default 24 if 64BIT # SV39 based
 	default 17

 config ARCH_MMAP_RND_COMPAT_BITS_MAX
 	default 17

 # set if we run in machine mode, cleared if we run in supervisor mode
 config RISCV_M_MODE
 	bool
 	default !MMU

 # set if we are running in S-mode and can use SBI calls
 config RISCV_SBI
 	bool
 	depends on !RISCV_M_MODE
 	default y

 config MMU
 	bool "MMU-based Paged Memory Management Support"
 	default y
 	help
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.

 config PAGE_OFFSET
 	hex
 	default 0xC0000000 if 32BIT
 	default 0x80000000 if 64BIT && !MMU
 	default 0xff60000000000000 if 64BIT

 config KASAN_SHADOW_OFFSET
 	hex
 	depends on KASAN_GENERIC
 	default 0xdfffffff00000000 if 64BIT
 	default 0xffffffff if 32BIT

 config ARCH_FLATMEM_ENABLE
 	def_bool !NUMA

 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	depends on MMU
 	select SPARSEMEM_STATIC if 32BIT && SPARSEMEM
 	select SPARSEMEM_VMEMMAP_ENABLE if 64BIT

 config ARCH_SELECT_MEMORY_MODEL
 	def_bool ARCH_SPARSEMEM_ENABLE

 config ARCH_SUPPORTS_UPROBES
 	def_bool y

 config STACKTRACE_SUPPORT
 	def_bool y

 config GENERIC_BUG
 	def_bool y
 	depends on BUG
 	select GENERIC_BUG_RELATIVE_POINTERS if 64BIT

 config GENERIC_BUG_RELATIVE_POINTERS
 	bool

 config GENERIC_CALIBRATE_DELAY
 	def_bool y

 config GENERIC_CSUM
 	def_bool y

 config GENERIC_HWEIGHT
 	def_bool y

 config FIX_EARLYCON_MEM
 	def_bool MMU

 config PGTABLE_LEVELS
 	int
 	default 5 if 64BIT
 	default 2

 config LOCKDEP_SUPPORT
 	def_bool y

 config RISCV_DMA_NONCOHERENT
 	bool
 	select ARCH_HAS_DMA_PREP_COHERENT
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select DMA_DIRECT_REMAP

 config AS_HAS_INSN
 	def_bool $(as-instr,.insn r 51$(comma) 0$(comma) 0$(comma) t0$(comma) t0$(comma) zero)

 source "arch/riscv/Kconfig.socs"
 source "arch/riscv/Kconfig.erratas"

 menu "Platform type"

 config NONPORTABLE
 	bool "Allow configurations that result in non-portable kernels"
 	help
 	  RISC-V kernel binaries are compatible between all known systems
 	  whenever possible, but there are some use cases that can only be
 	  satisfied by configurations that result in kernel binaries that are
 	  not portable between systems.

 	  Selecting N does not guarantee kernels will be portable to all known
 	  systems.  Selecting any of the options guarded by NONPORTABLE will
 	  result in kernel binaries that are unlikely to be portable between
 	  systems.

 	  If unsure, say N.

 choice
 	prompt "Base ISA"
 	default ARCH_RV64I
 	help
 	  This selects the base ISA that this kernel will target and must match
 	  the target platform.

 config ARCH_RV32I
 	bool "RV32I"
 	depends on NONPORTABLE
 	select 32BIT
 	select GENERIC_LIB_ASHLDI3
 	select GENERIC_LIB_ASHRDI3
 	select GENERIC_LIB_LSHRDI3
 	select GENERIC_LIB_UCMPDI2
 	select MMU

 config ARCH_RV64I
 	bool "RV64I"
 	select 64BIT
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
 	select SWIOTLB if MMU

 endchoice

 # We must be able to map all physical memory into the kernel, but the compiler
 # is still a bit more efficient when generating code if it's setup in a manner
 # such that it can only map 2GiB of memory.
 choice
 	prompt "Kernel Code Model"
 	default CMODEL_MEDLOW if 32BIT
 	default CMODEL_MEDANY if 64BIT

 	config CMODEL_MEDLOW
 		bool "medium low code model"
 	config CMODEL_MEDANY
 		bool "medium any code model"
 endchoice

 config MODULE_SECTIONS
 	bool
 	select HAVE_MOD_ARCH_SPECIFIC

 config SMP
 	bool "Symmetric Multi-Processing"
 	help
 	  This enables support for systems with more than one CPU.  If
 	  you say N here, the kernel will run on single and
 	  multiprocessor machines, but will use only one CPU of a
 	  multiprocessor machine. If you say Y here, the kernel will run
 	  on many, but not all, single processor machines. On a single
 	  processor machine, the kernel will run faster if you say N
 	  here.

 	  If you don't know what to do here, say N.

 config NR_CPUS
 	int "Maximum number of CPUs (2-512)"
 	depends on SMP
 	range 2 512 if !RISCV_SBI_V01
 	range 2 32 if RISCV_SBI_V01 && 32BIT
 	range 2 64 if RISCV_SBI_V01 && 64BIT
 	default "32" if 32BIT
 	default "64" if 64BIT

 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP
 	select GENERIC_IRQ_MIGRATION
 	help

 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.

 	  Say N if you want to disable CPU hotplug.

 choice
 	prompt "CPU Tuning"
 	default TUNE_GENERIC

 config TUNE_GENERIC
 	bool "generic"

 endchoice

 # Common NUMA Features
 config NUMA
 	bool "NUMA Memory Allocation and Scheduler Support"
 	depends on SMP && MMU
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select GENERIC_ARCH_NUMA
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK
 	select OF_NUMA
 	select USE_PERCPU_NUMA_NODE_ID
 	help
 	  Enable NUMA (Non-Uniform Memory Access) support.

 	  The kernel will try to allocate memory used by a CPU on the
 	  local memory of the CPU and add some more NUMA awareness to the kernel.

 config NODES_SHIFT
 	int "Maximum NUMA Nodes (as a power of 2)"
 	range 1 10
 	default "2"
 	depends on NUMA
 	help
 	  Specify the maximum number of NUMA Nodes available on the target
 	  system.  Increases memory reserved to accommodate various tables.

 config RISCV_ALTERNATIVE
 	bool
 	depends on !XIP_KERNEL
 	help
 	  This Kconfig allows the kernel to automatically patch the
 	  errata required by the execution platform at run time. The
 	  code patching is performed once in the boot stages. It means
 	  that the overhead from this mechanism is just taken once.

 config RISCV_ALTERNATIVE_EARLY
 	bool
 	depends on RISCV_ALTERNATIVE
 	help
 	  Allows early patching of the kernel for special errata

 config RISCV_ISA_C
 	bool "Emit compressed instructions when building Linux"
 	default y
 	help
 	  Adds "C" to the ISA subsets that the toolchain is allowed to emit
 	  when building Linux, which results in compressed instructions in the
 	  Linux binary.

 	  If you don't know what to do here, say Y.

 config RISCV_ISA_SVPBMT
 	bool "SVPBMT extension support"
 	depends on 64BIT && MMU
 	depends on !XIP_KERNEL
 	default y
 	select RISCV_ALTERNATIVE
 	help
 	   Adds support to dynamically detect the presence of the SVPBMT
 	   ISA-extension (Supervisor-mode: page-based memory types) and
 	   enable its usage.

 	   The memory type for a page contains a combination of attributes
 	   that indicate the cacheability, idempotency, and ordering
 	   properties for access to that page.

 	   The SVPBMT extension is only available on 64Bit cpus.

 	   If you don't know what to do here, say Y.

 config TOOLCHAIN_HAS_ZBB
 	bool
 	default y
 	depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64ima_zbb)
 	depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zbb)
 	depends on LLD_VERSION >= 150000 || LD_VERSION >= 23900
 	depends on AS_IS_GNU

 config RISCV_ISA_ZBB
 	bool "Zbb extension support for bit manipulation instructions"
 	depends on TOOLCHAIN_HAS_ZBB
 	depends on !XIP_KERNEL && MMU
 	select RISCV_ALTERNATIVE
 	default y
 	help
 	   Adds support to dynamically detect the presence of the ZBB
 	   extension (basic bit manipulation) and enable its usage.

 	   The Zbb extension provides instructions to accelerate a number
 	   of bit-specific operations (count bit population, sign extending,
 	   bitrotation, etc).

 	   If you don't know what to do here, say Y.

 config RISCV_ISA_ZICBOM
 	bool "Zicbom extension support for non-coherent DMA operation"
 	depends on !XIP_KERNEL && MMU
 	default y
 	select RISCV_ALTERNATIVE
 	select RISCV_DMA_NONCOHERENT
 	help
 	   Adds support to dynamically detect the presence of the ZICBOM
 	   extension (Cache Block Management Operations) and enable its
 	   usage.

 	   The Zicbom extension can be used to handle for example
 	   non-coherent DMA support on devices that need it.

 	   If you don't know what to do here, say Y.

 config TOOLCHAIN_HAS_ZIHINTPAUSE
 	bool
 	default y
 	depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64ima_zihintpause)
 	depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zihintpause)
 	depends on LLD_VERSION >= 150000 || LD_VERSION >= 23600

 config FPU
 	bool "FPU support"
 	default y
 	help
 	  Say N here if you want to disable all floating-point related procedure
 	  in the kernel.

 	  If you don't know what to do here, say Y.

 endmenu # "Platform type"

 menu "Kernel features"

 source "kernel/Kconfig.hz"

 config RISCV_SBI_V01
 	bool "SBI v0.1 support"
 	depends on RISCV_SBI
 	help
 	  This config allows kernel to use SBI v0.1 APIs. This will be
 	  deprecated in future once legacy M-mode software are no longer in use.

 config RISCV_BOOT_SPINWAIT
 	bool "Spinwait booting method"
 	depends on SMP
 	default y if RISCV_SBI_V01 || RISCV_M_MODE
 	help
 	  This enables support for booting Linux via spinwait method. In the
 	  spinwait method, all cores randomly jump to Linux. One of the cores
 	  gets chosen via lottery and all other keep spinning on a percpu
 	  variable. This method cannot support CPU hotplug and sparse hartid
 	  scheme. It should be only enabled for M-mode Linux or platforms relying
 	  on older firmware without SBI HSM extension. All other platforms should
 	  rely on ordered booting via SBI HSM extension which gets chosen
 	  dynamically at runtime if the firmware supports it.

 	  Since spinwait is incompatible with sparse hart IDs, it requires
 	  NR_CPUS be large enough to contain the physical hart ID of the first
 	  hart to enter Linux.

 	  If unsure what to do here, say N.

 config KEXEC
 	bool "Kexec system call"
 	depends on MMU
 	select HOTPLUG_CPU if SMP
 	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel. It is like a reboot
 	  but it is independent of the system firmware. And like a reboot
 	  you can start any kernel with it, not just Linux.

 	  The name comes from the similarity to the exec system call.

 config KEXEC_FILE
 	bool "kexec file based systmem call"
 	depends on 64BIT && MMU
 	select HAVE_IMA_KEXEC if IMA
 	select KEXEC_CORE
 	select KEXEC_ELF
 	help
 	  This is new version of kexec system call. This system call is
 	  file based and takes file descriptors as system call argument
 	  for kernel and initramfs as opposed to list of segments as
 	  accepted by previous system call.

 	  If you don't know what to do here, say Y.

 config ARCH_HAS_KEXEC_PURGATORY
 	def_bool KEXEC_FILE
 	depends on CRYPTO=y
 	depends on CRYPTO_SHA256=y

 config CRASH_DUMP
 	bool "Build kdump crash kernel"
 	help
 	  Generate crash dump after being started by kexec. This should
 	  be normally only set in special crash dump kernels which are
 	  loaded in the main kernel with kexec-tools into a specially
 	  reserved region and then later executed after a crash by
 	  kdump/kexec.

 	  For more details see Documentation/admin-guide/kdump/kdump.rst

 config COMPAT
 	bool "Kernel support for 32-bit U-mode"
 	default 64BIT
 	depends on 64BIT && MMU
 	help
 	  This option enables support for a 32-bit U-mode running under a 64-bit
 	  kernel at S-mode. riscv32-specific components such as system calls,
 	  the user helper functions (vdso), signal rt_frame functions and the
 	  ptrace interface are handled appropriately by the kernel.

 	  If you want to execute 32-bit userspace applications, say Y.

 endmenu # "Kernel features"

 menu "Boot options"

 config CMDLINE
 	string "Built-in kernel command line"
 	help
 	  For most platforms, the arguments for the kernel's command line
 	  are provided at run-time, during boot. However, there are cases
 	  where either no arguments are being provided or the provided
 	  arguments are insufficient or even invalid.

 	  When that occurs, it is possible to define a built-in command
 	  line here and choose how the kernel should use it later on.

 choice
 	prompt "Built-in command line usage" if CMDLINE != ""
 	default CMDLINE_FALLBACK
 	help
 	  Choose how the kernel will handle the provided built-in command
 	  line.

 config CMDLINE_FALLBACK
 	bool "Use bootloader kernel arguments if available"
 	help
 	  Use the built-in command line as fallback in case we get nothing
 	  during boot. This is the default behaviour.

 config CMDLINE_EXTEND
 	bool "Extend bootloader kernel arguments"
 	help
 	  The command-line arguments provided during boot will be
 	  appended to the built-in command line. This is useful in
 	  cases where the provided arguments are insufficient and
 	  you don't want to or cannot modify them.

 config CMDLINE_FORCE
 	bool "Always use the default kernel command string"
 	help
 	  Always use the built-in command line, even if we get one during
 	  boot. This is useful in case you need to override the provided
 	  command line on systems where you don't have or want control
 	  over it.

 endchoice

 config EFI_STUB
 	bool

 config EFI
 	bool "UEFI runtime support"
 	depends on OF && !XIP_KERNEL
 	depends on MMU
 	default y
 	select EFI_GENERIC_STUB
 	select EFI_PARAMS_FROM_FDT
 	select EFI_RUNTIME_WRAPPERS
 	select EFI_STUB
 	select LIBFDT
 	select RISCV_ISA_C
 	select UCS2_STRING
 	help
 	  This option provides support for runtime services provided
 	  by UEFI firmware (such as non-volatile variables, realtime
 	  clock, and platform reset). A UEFI stub is also provided to
 	  allow the kernel to be booted as an EFI application. This
 	  is only useful on systems that have UEFI firmware.

 config CC_HAVE_STACKPROTECTOR_TLS
 	def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0)

 config STACKPROTECTOR_PER_TASK
 	def_bool y
 	depends on !RANDSTRUCT
 	depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS

 config PHYS_RAM_BASE_FIXED
 	bool "Explicitly specified physical RAM address"
 	depends on NONPORTABLE
 	default n

 config PHYS_RAM_BASE
 	hex "Platform Physical RAM address"
 	depends on PHYS_RAM_BASE_FIXED
 	default "0x80000000"
 	help
 	  This is the physical address of RAM in the system. It has to be
 	  explicitly specified to run early relocations of read-write data
 	  from flash to RAM.

 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
 	depends on MMU && SPARSEMEM && NONPORTABLE
 	# This prevents XIP from being enabled by all{yes,mod}config, which
 	# fail to build since XIP doesn't support large kernels.
 	depends on !COMPILE_TEST
 	select PHYS_RAM_BASE_FIXED
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
 	  space since the text section of the kernel is not loaded from flash
 	  to RAM.  Read-write sections, such as the data section and stack,
 	  are still copied to RAM.  The XIP kernel is not compressed since
 	  it has to run directly from flash, so it will take more space to
 	  store it.  The flash address used to link the kernel object files,
 	  and for storing it, is configuration dependent. Therefore, if you
 	  say Y here, you must know the proper physical address where to
 	  store the kernel image depending on your own flash memory usage.

 	  Also note that the make target becomes "make xipImage" rather than
 	  "make zImage" or "make Image".  The final kernel binary to put in
 	  ROM memory will be arch/riscv/boot/xipImage.

 	  SPARSEMEM is required because the kernel text and rodata that are
 	  flash resident are not backed by memmap, then any attempt to get
 	  a struct page on those regions will trigger a fault.

 	  If unsure, say N.

 config XIP_PHYS_ADDR
 	hex "XIP Kernel Physical Location"
 	depends on XIP_KERNEL
 	default "0x21000000"
 	help
 	  This is the physical address in your flash memory the kernel will
 	  be linked for and stored to.  This address is dependent on your
 	  own flash usage.

 endmenu # "Boot options"

 config BUILTIN_DTB
 	bool
 	depends on OF && NONPORTABLE
 	default y if XIP_KERNEL

 config PORTABLE
 	bool
 	default !NONPORTABLE
 	select EFI
 	select MMU
 	select OF

 menu "Power management options"

 source "kernel/power/Kconfig"

 endmenu # "Power management options"

 menu "CPU Power Management"

 source "drivers/cpuidle/Kconfig"

 source "drivers/cpufreq/Kconfig"

 endmenu # "CPU Power Management"

 source "arch/riscv/kvm/Kconfig"
	# SPDX-License-Identifier: GPL-2.0-only
	#
	# For a description of the syntax of this configuration file,
	# see Documentation/kbuild/kconfig-language.rst.
	#

	config 64BIT
	bool

	config 32BIT
	bool

	config RISCV
	def_bool y
	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
	select ARCH_HAS_BINFMT_FLAT
	select ARCH_HAS_CURRENT_STACK_POINTER
	select ARCH_HAS_DEBUG_VIRTUAL if MMU
	select ARCH_HAS_DEBUG_VM_PGTABLE
	select ARCH_HAS_DEBUG_WX
	select ARCH_HAS_FORTIFY_SOURCE
	select ARCH_HAS_GCOV_PROFILE_ALL
	select ARCH_HAS_GIGANTIC_PAGE
	select ARCH_HAS_KCOV
	select ARCH_HAS_MMIOWB
	select ARCH_HAS_PMEM_API
	select ARCH_HAS_PTE_SPECIAL
	select ARCH_HAS_SET_DIRECT_MAP if MMU
	select ARCH_HAS_SET_MEMORY if MMU
	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
	select ARCH_HAS_STRICT_MODULE_RWX if MMU && !XIP_KERNEL
	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
	select ARCH_HAS_UBSAN_SANITIZE_ALL
	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
	select ARCH_STACKWALK
	select ARCH_SUPPORTS_ATOMIC_RMW
	select ARCH_SUPPORTS_DEBUG_PAGEALLOC if MMU
	select ARCH_SUPPORTS_HUGETLBFS if MMU
	select ARCH_SUPPORTS_PAGE_TABLE_CHECK if MMU
	select ARCH_USE_MEMTEST
	select ARCH_USE_QUEUED_RWLOCKS
	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
	select ARCH_WANT_FRAME_POINTERS
	select ARCH_WANT_GENERAL_HUGETLB
	select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
	select ARCH_WANT_LD_ORPHAN_WARN if !XIP_KERNEL
	select ARCH_WANTS_THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
	select BINFMT_FLAT_NO_DATA_START_OFFSET if !MMU
	select BUILDTIME_TABLE_SORT if MMU
	select CLINT_TIMER if !MMU
	select CLONE_BACKWARDS
	select COMMON_CLK
	select CPU_PM if CPU_IDLE
	select EDAC_SUPPORT
	select GENERIC_ARCH_TOPOLOGY
	select GENERIC_ATOMIC64 if !64BIT
	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
	select GENERIC_EARLY_IOREMAP
	select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
	select GENERIC_IDLE_POLL_SETUP
	select GENERIC_IOREMAP if MMU
	select GENERIC_IRQ_MULTI_HANDLER
	select GENERIC_IRQ_SHOW
	select GENERIC_IRQ_SHOW_LEVEL
	select GENERIC_LIB_DEVMEM_IS_ALLOWED
	select GENERIC_PCI_IOMAP
	select GENERIC_PTDUMP if MMU
	select GENERIC_SCHED_CLOCK
	select GENERIC_SMP_IDLE_THREAD
	select GENERIC_TIME_VSYSCALL if MMU && 64BIT
	select GENERIC_VDSO_TIME_NS if HAVE_GENERIC_VDSO
	select HARDIRQS_SW_RESEND
	select HAVE_ARCH_AUDITSYSCALL
	select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP
	select HAVE_ARCH_HUGE_VMAP if MMU && 64BIT && !XIP_KERNEL
	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
	select HAVE_ARCH_JUMP_LABEL_RELATIVE if !XIP_KERNEL
	select HAVE_ARCH_KASAN if MMU && 64BIT
	select HAVE_ARCH_KASAN_VMALLOC if MMU && 64BIT
	select HAVE_ARCH_KFENCE if MMU && 64BIT
	select HAVE_ARCH_KGDB if !XIP_KERNEL
	select HAVE_ARCH_KGDB_QXFER_PKT
	select HAVE_ARCH_MMAP_RND_BITS if MMU
	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
	select HAVE_ARCH_SECCOMP_FILTER
	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
	select HAVE_ARCH_TRACEHOOK
	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT && MMU
	select HAVE_ARCH_VMAP_STACK if MMU && 64BIT
	select HAVE_ASM_MODVERSIONS
	select HAVE_CONTEXT_TRACKING_USER
	select HAVE_DEBUG_KMEMLEAK
	select HAVE_DMA_CONTIGUOUS if MMU
	select HAVE_EBPF_JIT if MMU
	select HAVE_FUNCTION_ARG_ACCESS_API
	select HAVE_FUNCTION_ERROR_INJECTION
	select HAVE_GCC_PLUGINS
	select HAVE_GENERIC_VDSO if MMU && 64BIT
	select HAVE_IRQ_TIME_ACCOUNTING
	select HAVE_KPROBES if !XIP_KERNEL
	select HAVE_KPROBES_ON_FTRACE if !XIP_KERNEL
	select HAVE_KRETPROBES if !XIP_KERNEL
	select HAVE_RETHOOK if !XIP_KERNEL
	select HAVE_MOVE_PMD
	select HAVE_MOVE_PUD
	select HAVE_PCI
	select HAVE_PERF_EVENTS
	select HAVE_PERF_REGS
	select HAVE_PERF_USER_STACK_DUMP
	select HAVE_POSIX_CPU_TIMERS_TASK_WORK
	select HAVE_REGS_AND_STACK_ACCESS_API
	select HAVE_RSEQ
	select HAVE_STACKPROTECTOR
	select HAVE_SYSCALL_TRACEPOINTS
	select IRQ_DOMAIN
	select IRQ_FORCED_THREADING
	select MODULES_USE_ELF_RELA if MODULES
	select MODULE_SECTIONS if MODULES
	select OF
	select OF_DMA_DEFAULT_COHERENT
	select OF_EARLY_FLATTREE
	select OF_IRQ
	select PCI_DOMAINS_GENERIC if PCI
	select PCI_MSI if PCI
	select RISCV_INTC
	select RISCV_TIMER if RISCV_SBI
	select SIFIVE_PLIC
	select SPARSE_IRQ
	select SYSCTL_EXCEPTION_TRACE
	select THREAD_INFO_IN_TASK
	select TRACE_IRQFLAGS_SUPPORT
	select UACCESS_MEMCPY if !MMU
	select ZONE_DMA32 if 64BIT
	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && MMU && $(cc-option,-fpatchable-function-entry=8)
	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
	select HAVE_FUNCTION_GRAPH_TRACER
	select HAVE_FUNCTION_TRACER if !XIP_KERNEL && !PREEMPTION

	config ARCH_MMAP_RND_BITS_MIN
	default 18 if 64BIT
	default 8

	config ARCH_MMAP_RND_COMPAT_BITS_MIN
	default 8

	# max bits determined by the following formula:
	# VA_BITS - PAGE_SHIFT - 3
	config ARCH_MMAP_RND_BITS_MAX
	default 24 if 64BIT # SV39 based
	default 17

	config ARCH_MMAP_RND_COMPAT_BITS_MAX
	default 17

	# set if we run in machine mode, cleared if we run in supervisor mode
	config RISCV_M_MODE
	bool
	default !MMU

	# set if we are running in S-mode and can use SBI calls
	config RISCV_SBI
	bool
	depends on !RISCV_M_MODE
	default y

	config MMU
	bool "MMU-based Paged Memory Management Support"
	default y
	help
	Select if you want MMU-based virtualised addressing space
	support by paged memory management. If unsure, say 'Y'.

	config PAGE_OFFSET
	hex
	default 0xC0000000 if 32BIT
	default 0x80000000 if 64BIT && !MMU
	default 0xff60000000000000 if 64BIT

	config KASAN_SHADOW_OFFSET
	hex
	depends on KASAN_GENERIC
	default 0xdfffffff00000000 if 64BIT
	default 0xffffffff if 32BIT

	config ARCH_FLATMEM_ENABLE
	def_bool !NUMA

	config ARCH_SPARSEMEM_ENABLE
	def_bool y
	depends on MMU
	select SPARSEMEM_STATIC if 32BIT && SPARSEMEM
	select SPARSEMEM_VMEMMAP_ENABLE if 64BIT

	config ARCH_SELECT_MEMORY_MODEL
	def_bool ARCH_SPARSEMEM_ENABLE

	config ARCH_SUPPORTS_UPROBES
	def_bool y

	config STACKTRACE_SUPPORT
	def_bool y

	config GENERIC_BUG
	def_bool y
	depends on BUG
	select GENERIC_BUG_RELATIVE_POINTERS if 64BIT

	config GENERIC_BUG_RELATIVE_POINTERS
	bool

	config GENERIC_CALIBRATE_DELAY
	def_bool y

	config GENERIC_CSUM
	def_bool y

	config GENERIC_HWEIGHT
	def_bool y

	config FIX_EARLYCON_MEM
	def_bool MMU

	config PGTABLE_LEVELS
	int
	default 5 if 64BIT
	default 2

	config LOCKDEP_SUPPORT
	def_bool y

	config RISCV_DMA_NONCOHERENT
	bool
	select ARCH_HAS_DMA_PREP_COHERENT
	select ARCH_HAS_SETUP_DMA_OPS
	select ARCH_HAS_SYNC_DMA_FOR_CPU
	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
	select DMA_DIRECT_REMAP

	config AS_HAS_INSN
	def_bool $(as-instr,.insn r 51$(comma) 0$(comma) 0$(comma) t0$(comma) t0$(comma) zero)

	source "arch/riscv/Kconfig.socs"
	source "arch/riscv/Kconfig.erratas"

	menu "Platform type"

	config NONPORTABLE
	bool "Allow configurations that result in non-portable kernels"
	help
	RISC-V kernel binaries are compatible between all known systems
	whenever possible, but there are some use cases that can only be
	satisfied by configurations that result in kernel binaries that are
	not portable between systems.

	Selecting N does not guarantee kernels will be portable to all known
	systems. Selecting any of the options guarded by NONPORTABLE will
	result in kernel binaries that are unlikely to be portable between
	systems.

	If unsure, say N.

	choice
	prompt "Base ISA"
	default ARCH_RV64I
	help
	This selects the base ISA that this kernel will target and must match
	the target platform.

	config ARCH_RV32I
	bool "RV32I"
	depends on NONPORTABLE
	select 32BIT
	select GENERIC_LIB_ASHLDI3
	select GENERIC_LIB_ASHRDI3
	select GENERIC_LIB_LSHRDI3
	select GENERIC_LIB_UCMPDI2
	select MMU

	config ARCH_RV64I
	bool "RV64I"
	select 64BIT
	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
	select SWIOTLB if MMU

	endchoice

	# We must be able to map all physical memory into the kernel, but the compiler
	# is still a bit more efficient when generating code if it's setup in a manner
	# such that it can only map 2GiB of memory.
	choice
	prompt "Kernel Code Model"
	default CMODEL_MEDLOW if 32BIT
	default CMODEL_MEDANY if 64BIT

	config CMODEL_MEDLOW
	bool "medium low code model"
	config CMODEL_MEDANY
	bool "medium any code model"
	endchoice

	config MODULE_SECTIONS
	bool
	select HAVE_MOD_ARCH_SPECIFIC

	config SMP
	bool "Symmetric Multi-Processing"
	help
	This enables support for systems with more than one CPU. If
	you say N here, the kernel will run on single and
	multiprocessor machines, but will use only one CPU of a
	multiprocessor machine. If you say Y here, the kernel will run
	on many, but not all, single processor machines. On a single
	processor machine, the kernel will run faster if you say N
	here.

	If you don't know what to do here, say N.

	config NR_CPUS
	int "Maximum number of CPUs (2-512)"
	depends on SMP
	range 2 512 if !RISCV_SBI_V01
	range 2 32 if RISCV_SBI_V01 && 32BIT
	range 2 64 if RISCV_SBI_V01 && 64BIT
	default "32" if 32BIT
	default "64" if 64BIT

	config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs"
	depends on SMP
	select GENERIC_IRQ_MIGRATION
	help

	Say Y here to experiment with turning CPUs off and on. CPUs
	can be controlled through /sys/devices/system/cpu.

	Say N if you want to disable CPU hotplug.

	choice
	prompt "CPU Tuning"
	default TUNE_GENERIC

	config TUNE_GENERIC
	bool "generic"

	endchoice

	# Common NUMA Features
	config NUMA
	bool "NUMA Memory Allocation and Scheduler Support"
	depends on SMP && MMU
	select ARCH_SUPPORTS_NUMA_BALANCING
	select GENERIC_ARCH_NUMA
	select NEED_PER_CPU_EMBED_FIRST_CHUNK
	select OF_NUMA
	select USE_PERCPU_NUMA_NODE_ID
	help
	Enable NUMA (Non-Uniform Memory Access) support.

	The kernel will try to allocate memory used by a CPU on the
	local memory of the CPU and add some more NUMA awareness to the kernel.

	config NODES_SHIFT
	int "Maximum NUMA Nodes (as a power of 2)"
	range 1 10
	default "2"
	depends on NUMA
	help
	Specify the maximum number of NUMA Nodes available on the target
	system. Increases memory reserved to accommodate various tables.

	config RISCV_ALTERNATIVE
	bool
	depends on !XIP_KERNEL
	help
	This Kconfig allows the kernel to automatically patch the
	errata required by the execution platform at run time. The
	code patching is performed once in the boot stages. It means
	that the overhead from this mechanism is just taken once.

	config RISCV_ALTERNATIVE_EARLY
	bool
	depends on RISCV_ALTERNATIVE
	help
	Allows early patching of the kernel for special errata

	config RISCV_ISA_C
	bool "Emit compressed instructions when building Linux"
	default y
	help
	Adds "C" to the ISA subsets that the toolchain is allowed to emit
	when building Linux, which results in compressed instructions in the
	Linux binary.

	If you don't know what to do here, say Y.

	config RISCV_ISA_SVPBMT
	bool "SVPBMT extension support"
	depends on 64BIT && MMU
	depends on !XIP_KERNEL
	default y
	select RISCV_ALTERNATIVE
	help
	Adds support to dynamically detect the presence of the SVPBMT
	ISA-extension (Supervisor-mode: page-based memory types) and
	enable its usage.

	The memory type for a page contains a combination of attributes
	that indicate the cacheability, idempotency, and ordering
	properties for access to that page.

	The SVPBMT extension is only available on 64Bit cpus.

	If you don't know what to do here, say Y.

	config TOOLCHAIN_HAS_ZBB
	bool
	default y
	depends on !64BIT \|\| $(cc-option,-mabi=lp64 -march=rv64ima_zbb)
	depends on !32BIT \|\| $(cc-option,-mabi=ilp32 -march=rv32ima_zbb)
	depends on LLD_VERSION >= 150000 \|\| LD_VERSION >= 23900
	depends on AS_IS_GNU

	config RISCV_ISA_ZBB
	bool "Zbb extension support for bit manipulation instructions"
	depends on TOOLCHAIN_HAS_ZBB
	depends on !XIP_KERNEL && MMU
	select RISCV_ALTERNATIVE
	default y
	help
	Adds support to dynamically detect the presence of the ZBB
	extension (basic bit manipulation) and enable its usage.

	The Zbb extension provides instructions to accelerate a number
	of bit-specific operations (count bit population, sign extending,
	bitrotation, etc).

	If you don't know what to do here, say Y.

	config RISCV_ISA_ZICBOM
	bool "Zicbom extension support for non-coherent DMA operation"
	depends on !XIP_KERNEL && MMU
	default y
	select RISCV_ALTERNATIVE
	select RISCV_DMA_NONCOHERENT
	help
	Adds support to dynamically detect the presence of the ZICBOM
	extension (Cache Block Management Operations) and enable its
	usage.

	The Zicbom extension can be used to handle for example
	non-coherent DMA support on devices that need it.

	If you don't know what to do here, say Y.

	config TOOLCHAIN_HAS_ZIHINTPAUSE
	bool
	default y
	depends on !64BIT \|\| $(cc-option,-mabi=lp64 -march=rv64ima_zihintpause)
	depends on !32BIT \|\| $(cc-option,-mabi=ilp32 -march=rv32ima_zihintpause)
	depends on LLD_VERSION >= 150000 \|\| LD_VERSION >= 23600

	config FPU
	bool "FPU support"
	default y
	help
	Say N here if you want to disable all floating-point related procedure
	in the kernel.

	If you don't know what to do here, say Y.

	endmenu # "Platform type"

	menu "Kernel features"

	source "kernel/Kconfig.hz"

	config RISCV_SBI_V01
	bool "SBI v0.1 support"
	depends on RISCV_SBI
	help
	This config allows kernel to use SBI v0.1 APIs. This will be
	deprecated in future once legacy M-mode software are no longer in use.

	config RISCV_BOOT_SPINWAIT
	bool "Spinwait booting method"
	depends on SMP
	default y if RISCV_SBI_V01 \|\| RISCV_M_MODE
	help
	This enables support for booting Linux via spinwait method. In the
	spinwait method, all cores randomly jump to Linux. One of the cores
	gets chosen via lottery and all other keep spinning on a percpu
	variable. This method cannot support CPU hotplug and sparse hartid
	scheme. It should be only enabled for M-mode Linux or platforms relying
	on older firmware without SBI HSM extension. All other platforms should
	rely on ordered booting via SBI HSM extension which gets chosen
	dynamically at runtime if the firmware supports it.

	Since spinwait is incompatible with sparse hart IDs, it requires
	NR_CPUS be large enough to contain the physical hart ID of the first
	hart to enter Linux.

	If unsure what to do here, say N.

	config KEXEC
	bool "Kexec system call"
	depends on MMU
	select HOTPLUG_CPU if SMP
	select KEXEC_CORE
	help
	kexec is a system call that implements the ability to shutdown your
	current kernel, and to start another kernel. It is like a reboot
	but it is independent of the system firmware. And like a reboot
	you can start any kernel with it, not just Linux.

	The name comes from the similarity to the exec system call.

	config KEXEC_FILE
	bool "kexec file based systmem call"
	depends on 64BIT && MMU
	select HAVE_IMA_KEXEC if IMA
	select KEXEC_CORE
	select KEXEC_ELF
	help
	This is new version of kexec system call. This system call is
	file based and takes file descriptors as system call argument
	for kernel and initramfs as opposed to list of segments as
	accepted by previous system call.

	If you don't know what to do here, say Y.

	config ARCH_HAS_KEXEC_PURGATORY
	def_bool KEXEC_FILE
	depends on CRYPTO=y
	depends on CRYPTO_SHA256=y

	config CRASH_DUMP
	bool "Build kdump crash kernel"
	help
	Generate crash dump after being started by kexec. This should
	be normally only set in special crash dump kernels which are
	loaded in the main kernel with kexec-tools into a specially
	reserved region and then later executed after a crash by
	kdump/kexec.

	For more details see Documentation/admin-guide/kdump/kdump.rst

	config COMPAT
	bool "Kernel support for 32-bit U-mode"
	default 64BIT
	depends on 64BIT && MMU
	help
	This option enables support for a 32-bit U-mode running under a 64-bit
	kernel at S-mode. riscv32-specific components such as system calls,
	the user helper functions (vdso), signal rt_frame functions and the
	ptrace interface are handled appropriately by the kernel.

	If you want to execute 32-bit userspace applications, say Y.

	endmenu # "Kernel features"

	menu "Boot options"

	config CMDLINE
	string "Built-in kernel command line"
	help
	For most platforms, the arguments for the kernel's command line
	are provided at run-time, during boot. However, there are cases
	where either no arguments are being provided or the provided
	arguments are insufficient or even invalid.

	When that occurs, it is possible to define a built-in command
	line here and choose how the kernel should use it later on.

	choice
	prompt "Built-in command line usage" if CMDLINE != ""
	default CMDLINE_FALLBACK
	help
	Choose how the kernel will handle the provided built-in command
	line.

	config CMDLINE_FALLBACK
	bool "Use bootloader kernel arguments if available"
	help
	Use the built-in command line as fallback in case we get nothing
	during boot. This is the default behaviour.

	config CMDLINE_EXTEND
	bool "Extend bootloader kernel arguments"
	help
	The command-line arguments provided during boot will be
	appended to the built-in command line. This is useful in
	cases where the provided arguments are insufficient and
	you don't want to or cannot modify them.

	config CMDLINE_FORCE
	bool "Always use the default kernel command string"
	help
	Always use the built-in command line, even if we get one during
	boot. This is useful in case you need to override the provided
	command line on systems where you don't have or want control
	over it.

	endchoice

	config EFI_STUB
	bool

	config EFI
	bool "UEFI runtime support"
	depends on OF && !XIP_KERNEL
	depends on MMU
	default y
	select EFI_GENERIC_STUB
	select EFI_PARAMS_FROM_FDT
	select EFI_RUNTIME_WRAPPERS
	select EFI_STUB
	select LIBFDT
	select RISCV_ISA_C
	select UCS2_STRING
	help
	This option provides support for runtime services provided
	by UEFI firmware (such as non-volatile variables, realtime
	clock, and platform reset). A UEFI stub is also provided to
	allow the kernel to be booted as an EFI application. This
	is only useful on systems that have UEFI firmware.

	config CC_HAVE_STACKPROTECTOR_TLS
	def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0)

	config STACKPROTECTOR_PER_TASK
	def_bool y
	depends on !RANDSTRUCT
	depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS

	config PHYS_RAM_BASE_FIXED
	bool "Explicitly specified physical RAM address"
	depends on NONPORTABLE
	default n

	config PHYS_RAM_BASE
	hex "Platform Physical RAM address"
	depends on PHYS_RAM_BASE_FIXED
	default "0x80000000"
	help
	This is the physical address of RAM in the system. It has to be
	explicitly specified to run early relocations of read-write data
	from flash to RAM.

	config XIP_KERNEL
	bool "Kernel Execute-In-Place from ROM"
	depends on MMU && SPARSEMEM && NONPORTABLE
	# This prevents XIP from being enabled by all{yes,mod}config, which
	# fail to build since XIP doesn't support large kernels.
	depends on !COMPILE_TEST
	select PHYS_RAM_BASE_FIXED
	help
	Execute-In-Place allows the kernel to run from non-volatile storage
	directly addressable by the CPU, such as NOR flash. This saves RAM
	space since the text section of the kernel is not loaded from flash
	to RAM. Read-write sections, such as the data section and stack,
	are still copied to RAM. The XIP kernel is not compressed since
	it has to run directly from flash, so it will take more space to
	store it. The flash address used to link the kernel object files,
	and for storing it, is configuration dependent. Therefore, if you
	say Y here, you must know the proper physical address where to
	store the kernel image depending on your own flash memory usage.

	Also note that the make target becomes "make xipImage" rather than
	"make zImage" or "make Image". The final kernel binary to put in
	ROM memory will be arch/riscv/boot/xipImage.

	SPARSEMEM is required because the kernel text and rodata that are
	flash resident are not backed by memmap, then any attempt to get
	a struct page on those regions will trigger a fault.

	If unsure, say N.

	config XIP_PHYS_ADDR
	hex "XIP Kernel Physical Location"
	depends on XIP_KERNEL
	default "0x21000000"
	help
	This is the physical address in your flash memory the kernel will
	be linked for and stored to. This address is dependent on your
	own flash usage.

	endmenu # "Boot options"

	config BUILTIN_DTB
	bool
	depends on OF && NONPORTABLE
	default y if XIP_KERNEL

	config PORTABLE
	bool
	default !NONPORTABLE
	select EFI
	select MMU
	select OF

	menu "Power management options"

	source "kernel/power/Kconfig"

	endmenu # "Power management options"

	menu "CPU Power Management"

	source "drivers/cpuidle/Kconfig"

	source "drivers/cpufreq/Kconfig"

	endmenu # "CPU Power Management"

	source "arch/riscv/kvm/Kconfig"