| RT1011 Mono Class D Audio Amplifier |
| |
| This device supports I2C only. |
| |
| Required properties: |
| |
| - compatible : "realtek,rt1011". |
| |
| - reg : The I2C address of the device. This I2C address decide by |
| two input pins (ASEL1 and ASEL2). |
| ------------------------------------- |
| | ASEL2 | ASEL1 | Address | |
| ------------------------------------- |
| | 0 | 0 | 0x38 | |
| ------------------------------------- |
| | 0 | 1 | 0x39 | |
| ------------------------------------- |
| | 1 | 0 | 0x3a | |
| ------------------------------------- |
| | 1 | 1 | 0x3b | |
| ------------------------------------- |
| |
| Optional properties: |
| |
| - realtek,temperature_calib |
| u32. The temperature was measured while doing the calibration. Units: Celsius degree |
| |
| - realtek,r0_calib |
| u32. This is r0 calibration data which was measured in factory mode. |
| |
| Pins on the device (for linking into audio routes) for RT1011: |
| |
| * SPO |
| |
| Example: |
| |
| rt1011: codec@38 { |
| compatible = "realtek,rt1011"; |
| reg = <0x38>; |
| realtek,temperature_calib = <25>; |
| realtek,r0_calib = <0x224050>; |
| }; |
