| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * drivers/media/i2c/ccs/ccs-quirk.h |
| * |
| * Generic driver for MIPI CCS/SMIA/SMIA++ compliant camera sensors |
| * |
| * Copyright (C) 2020 Intel Corporation |
| * Copyright (C) 2011--2012 Nokia Corporation |
| * Contact: Sakari Ailus <sakari.ailus@linux.intel.com> |
| */ |
| |
| #ifndef __CCS_QUIRK__ |
| #define __CCS_QUIRK__ |
| |
| struct ccs_sensor; |
| |
| /** |
| * struct ccs_quirk - quirks for sensors that deviate from SMIA++ standard |
| * |
| * @limits: Replace sensor->limits with values which can't be read from |
| * sensor registers. Called the first time the sensor is powered up. |
| * @post_poweron: Called always after the sensor has been fully powered on. |
| * @pre_streamon: Called just before streaming is enabled. |
| * @post_streamoff: Called right after stopping streaming. |
| * @pll_flags: Return flags for the PLL calculator. |
| * @init: Quirk initialisation, called the last in probe(). This is |
| * also appropriate for adding sensor specific controls, for instance. |
| * @reg_access: Register access quirk. The quirk may divert the access |
| * to another register, or no register at all. |
| * |
| * @write: Is this read (false) or write (true) access? |
| * @reg: Pointer to the register to access |
| * @value: Register value, set by the caller on write, or |
| * by the quirk on read |
| * |
| * @flags: Quirk flags |
| * |
| * @return: 0 on success, -ENOIOCTLCMD if no register |
| * access may be done by the caller (default read |
| * value is zero), else negative error code on error |
| */ |
| struct ccs_quirk { |
| int (*limits)(struct ccs_sensor *sensor); |
| int (*post_poweron)(struct ccs_sensor *sensor); |
| int (*pre_streamon)(struct ccs_sensor *sensor); |
| int (*post_streamoff)(struct ccs_sensor *sensor); |
| unsigned long (*pll_flags)(struct ccs_sensor *sensor); |
| int (*init)(struct ccs_sensor *sensor); |
| int (*reg_access)(struct ccs_sensor *sensor, bool write, u32 *reg, |
| u32 *val); |
| unsigned long flags; |
| }; |
| |
| #define CCS_QUIRK_FLAG_8BIT_READ_ONLY (1 << 0) |
| |
| struct ccs_reg_8 { |
| u16 reg; |
| u8 val; |
| }; |
| |
| #define CCS_MK_QUIRK_REG_8(_reg, _val) \ |
| { \ |
| .reg = (u16)_reg, \ |
| .val = _val, \ |
| } |
| |
| #define ccs_call_quirk(sensor, _quirk, ...) \ |
| ((sensor)->minfo.quirk && \ |
| (sensor)->minfo.quirk->_quirk ? \ |
| (sensor)->minfo.quirk->_quirk(sensor, ##__VA_ARGS__) : 0) |
| |
| #define ccs_needs_quirk(sensor, _quirk) \ |
| ((sensor)->minfo.quirk ? \ |
| (sensor)->minfo.quirk->flags & _quirk : 0) |
| |
| extern const struct ccs_quirk smiapp_jt8ev1_quirk; |
| extern const struct ccs_quirk smiapp_imx125es_quirk; |
| extern const struct ccs_quirk smiapp_jt8ew9_quirk; |
| extern const struct ccs_quirk smiapp_tcm8500md_quirk; |
| |
| #endif /* __CCS_QUIRK__ */ |