| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/solomon,ssd-common.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Common properties for Solomon OLED Display Controllers |
| |
| maintainers: |
| - Javier Martinez Canillas <javierm@redhat.com> |
| |
| properties: |
| reg: |
| maxItems: 1 |
| |
| reset-gpios: |
| maxItems: 1 |
| |
| # Only required for SPI |
| dc-gpios: |
| description: |
| GPIO connected to the controller's D/C# (Data/Command) pin, |
| that is needed for 4-wire SPI to tell the controller if the |
| data sent is for a command register or the display data RAM |
| maxItems: 1 |
| |
| solomon,height: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| Height in pixel of the screen driven by the controller. |
| The default value is controller-dependent. |
| |
| solomon,width: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| Width in pixel of the screen driven by the controller. |
| The default value is controller-dependent. |
| |
| allOf: |
| - $ref: /schemas/spi/spi-peripheral-props.yaml# |
| |
| additionalProperties: true |