blob: 72689448a65329857d8149754fb31858898fb303 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
*/
/*
* Each of the CPU clusters (Power and Perf) on msm8996 are
* clocked via 2 PLLs, a primary and alternate. There are also
* 2 Mux'es, a primary and secondary all connected together
* as shown below
*
* +-------+
* XO | |
* +------------------>0 |
* SYS_APCS_AUX | |
* +------------------>3 |
* | |
* PLL/2 | SMUX +----+
* +------->1 | |
* | | | |
* | +-------+ | +-------+
* | +---->0 |
* | | |
* +---------------+ | +----------->1 | CPU clk
* |Primary PLL +----+ PLL_EARLY | | +------>
* | +------+-----------+ +------>2 PMUX |
* +---------------+ | | | |
* | +------+ | +-->3 |
* +--^+ ACD +-----+ | +-------+
* +---------------+ +------+ |
* |Alt PLL | |
* | +---------------------------+
* +---------------+ PLL_EARLY
*
* The primary PLL is what drives the CPU clk, except for times
* when we are reprogramming the PLL itself (for rate changes) when
* we temporarily switch to an alternate PLL.
*
* The primary PLL operates on a single VCO range, between 600MHz
* and 3GHz. However the CPUs do support OPPs with frequencies
* between 300MHz and 600MHz. In order to support running the CPUs
* at those frequencies we end up having to lock the PLL at twice
* the rate and drive the CPU clk via the PLL/2 output and SMUX.
*
* So for frequencies above 600MHz we follow the following path
* Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk
* and for frequencies between 300MHz and 600MHz we follow
* Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk
*
* ACD stands for Adaptive Clock Distribution and is used to
* detect voltage droops.
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <soc/qcom/kryo-l2-accessors.h>
#include <asm/cputype.h>
#include "clk-alpha-pll.h"
#include "clk-regmap.h"
#include "clk-regmap-mux.h"
enum _pmux_input {
SMUX_INDEX = 0,
PLL_INDEX,
ACD_INDEX,
ALT_INDEX,
NUM_OF_PMUX_INPUTS
};
#define DIV_2_THRESHOLD 600000000
#define PWRCL_REG_OFFSET 0x0
#define PERFCL_REG_OFFSET 0x80000
#define MUX_OFFSET 0x40
#define CLK_CTL_OFFSET 0x44
#define CLK_CTL_AUTO_CLK_SEL BIT(8)
#define ALT_PLL_OFFSET 0x100
#define SSSCTL_OFFSET 0x160
#define PSCTL_OFFSET 0x164
#define PMUX_MASK 0x3
#define MUX_AUTO_CLK_SEL_ALWAYS_ON_MASK GENMASK(5, 4)
#define MUX_AUTO_CLK_SEL_ALWAYS_ON_GPLL0_SEL \
FIELD_PREP(MUX_AUTO_CLK_SEL_ALWAYS_ON_MASK, 0x03)
static const u8 prim_pll_regs[PLL_OFF_MAX_REGS] = {
[PLL_OFF_L_VAL] = 0x04,
[PLL_OFF_ALPHA_VAL] = 0x08,
[PLL_OFF_USER_CTL] = 0x10,
[PLL_OFF_CONFIG_CTL] = 0x18,
[PLL_OFF_CONFIG_CTL_U] = 0x1c,
[PLL_OFF_TEST_CTL] = 0x20,
[PLL_OFF_TEST_CTL_U] = 0x24,
[PLL_OFF_STATUS] = 0x28,
};
static const u8 alt_pll_regs[PLL_OFF_MAX_REGS] = {
[PLL_OFF_L_VAL] = 0x04,
[PLL_OFF_ALPHA_VAL] = 0x08,
[PLL_OFF_USER_CTL] = 0x10,
[PLL_OFF_CONFIG_CTL] = 0x18,
[PLL_OFF_TEST_CTL] = 0x20,
[PLL_OFF_STATUS] = 0x28,
};
/* PLLs */
static const struct alpha_pll_config hfpll_config = {
.l = 54,
.config_ctl_val = 0x200d4828,
.config_ctl_hi_val = 0x006,
.test_ctl_val = 0x1c000000,
.test_ctl_hi_val = 0x00004000,
.pre_div_mask = BIT(12),
.post_div_mask = 0x3 << 8,
.post_div_val = 0x1 << 8,
.main_output_mask = BIT(0),
.early_output_mask = BIT(3),
};
static const struct clk_parent_data pll_parent[] = {
{ .fw_name = "xo" },
};
static struct clk_alpha_pll pwrcl_pll = {
.offset = PWRCL_REG_OFFSET,
.regs = prim_pll_regs,
.flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data){
.name = "pwrcl_pll",
.parent_data = pll_parent,
.num_parents = ARRAY_SIZE(pll_parent),
.ops = &clk_alpha_pll_hwfsm_ops,
},
};
static struct clk_alpha_pll perfcl_pll = {
.offset = PERFCL_REG_OFFSET,
.regs = prim_pll_regs,
.flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data){
.name = "perfcl_pll",
.parent_data = pll_parent,
.num_parents = ARRAY_SIZE(pll_parent),
.ops = &clk_alpha_pll_hwfsm_ops,
},
};
static struct clk_fixed_factor pwrcl_pll_postdiv = {
.mult = 1,
.div = 2,
.hw.init = &(struct clk_init_data){
.name = "pwrcl_pll_postdiv",
.parent_data = &(const struct clk_parent_data){
.hw = &pwrcl_pll.clkr.hw
},
.num_parents = 1,
.ops = &clk_fixed_factor_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_fixed_factor perfcl_pll_postdiv = {
.mult = 1,
.div = 2,
.hw.init = &(struct clk_init_data){
.name = "perfcl_pll_postdiv",
.parent_data = &(const struct clk_parent_data){
.hw = &perfcl_pll.clkr.hw
},
.num_parents = 1,
.ops = &clk_fixed_factor_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_fixed_factor perfcl_pll_acd = {
.mult = 1,
.div = 1,
.hw.init = &(struct clk_init_data){
.name = "perfcl_pll_acd",
.parent_data = &(const struct clk_parent_data){
.hw = &perfcl_pll.clkr.hw
},
.num_parents = 1,
.ops = &clk_fixed_factor_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_fixed_factor pwrcl_pll_acd = {
.mult = 1,
.div = 1,
.hw.init = &(struct clk_init_data){
.name = "pwrcl_pll_acd",
.parent_data = &(const struct clk_parent_data){
.hw = &pwrcl_pll.clkr.hw
},
.num_parents = 1,
.ops = &clk_fixed_factor_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
static const struct pll_vco alt_pll_vco_modes[] = {
VCO(3, 250000000, 500000000),
VCO(2, 500000000, 750000000),
VCO(1, 750000000, 1000000000),
VCO(0, 1000000000, 2150400000),
};
static const struct alpha_pll_config altpll_config = {
.l = 16,
.vco_val = 0x3 << 20,
.vco_mask = 0x3 << 20,
.config_ctl_val = 0x4001051b,
.post_div_mask = 0x3 << 8,
.post_div_val = 0x1 << 8,
.main_output_mask = BIT(0),
.early_output_mask = BIT(3),
};
static struct clk_alpha_pll pwrcl_alt_pll = {
.offset = PWRCL_REG_OFFSET + ALT_PLL_OFFSET,
.regs = alt_pll_regs,
.vco_table = alt_pll_vco_modes,
.num_vco = ARRAY_SIZE(alt_pll_vco_modes),
.flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data) {
.name = "pwrcl_alt_pll",
.parent_data = pll_parent,
.num_parents = ARRAY_SIZE(pll_parent),
.ops = &clk_alpha_pll_hwfsm_ops,
},
};
static struct clk_alpha_pll perfcl_alt_pll = {
.offset = PERFCL_REG_OFFSET + ALT_PLL_OFFSET,
.regs = alt_pll_regs,
.vco_table = alt_pll_vco_modes,
.num_vco = ARRAY_SIZE(alt_pll_vco_modes),
.flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data) {
.name = "perfcl_alt_pll",
.parent_data = pll_parent,
.num_parents = ARRAY_SIZE(pll_parent),
.ops = &clk_alpha_pll_hwfsm_ops,
},
};
struct clk_cpu_8996_pmux {
u32 reg;
struct notifier_block nb;
struct clk_regmap clkr;
};
static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
void *data);
#define to_clk_cpu_8996_pmux_nb(_nb) \
container_of(_nb, struct clk_cpu_8996_pmux, nb)
static inline struct clk_cpu_8996_pmux *to_clk_cpu_8996_pmux_hw(struct clk_hw *hw)
{
return container_of(to_clk_regmap(hw), struct clk_cpu_8996_pmux, clkr);
}
static u8 clk_cpu_8996_pmux_get_parent(struct clk_hw *hw)
{
struct clk_regmap *clkr = to_clk_regmap(hw);
struct clk_cpu_8996_pmux *cpuclk = to_clk_cpu_8996_pmux_hw(hw);
u32 val;
regmap_read(clkr->regmap, cpuclk->reg, &val);
return FIELD_GET(PMUX_MASK, val);
}
static int clk_cpu_8996_pmux_set_parent(struct clk_hw *hw, u8 index)
{
struct clk_regmap *clkr = to_clk_regmap(hw);
struct clk_cpu_8996_pmux *cpuclk = to_clk_cpu_8996_pmux_hw(hw);
u32 val;
val = FIELD_PREP(PMUX_MASK, index);
return regmap_update_bits(clkr->regmap, cpuclk->reg, PMUX_MASK, val);
}
static int clk_cpu_8996_pmux_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct clk_hw *parent;
if (req->rate < (DIV_2_THRESHOLD / 2))
return -EINVAL;
if (req->rate < DIV_2_THRESHOLD)
parent = clk_hw_get_parent_by_index(hw, SMUX_INDEX);
else
parent = clk_hw_get_parent_by_index(hw, ACD_INDEX);
if (!parent)
return -EINVAL;
req->best_parent_rate = clk_hw_round_rate(parent, req->rate);
req->best_parent_hw = parent;
return 0;
}
static const struct clk_ops clk_cpu_8996_pmux_ops = {
.set_parent = clk_cpu_8996_pmux_set_parent,
.get_parent = clk_cpu_8996_pmux_get_parent,
.determine_rate = clk_cpu_8996_pmux_determine_rate,
};
static const struct parent_map smux_parent_map[] = {
{ .cfg = 0, }, /* xo */
{ .cfg = 1, }, /* pll */
{ .cfg = 3, }, /* sys_apcs_aux */
};
static const struct clk_parent_data pwrcl_smux_parents[] = {
{ .fw_name = "xo" },
{ .hw = &pwrcl_pll_postdiv.hw },
{ .fw_name = "sys_apcs_aux" },
};
static const struct clk_parent_data perfcl_smux_parents[] = {
{ .fw_name = "xo" },
{ .hw = &perfcl_pll_postdiv.hw },
{ .fw_name = "sys_apcs_aux" },
};
static struct clk_regmap_mux pwrcl_smux = {
.reg = PWRCL_REG_OFFSET + MUX_OFFSET,
.shift = 2,
.width = 2,
.parent_map = smux_parent_map,
.clkr.hw.init = &(struct clk_init_data) {
.name = "pwrcl_smux",
.parent_data = pwrcl_smux_parents,
.num_parents = ARRAY_SIZE(pwrcl_smux_parents),
.ops = &clk_regmap_mux_closest_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap_mux perfcl_smux = {
.reg = PERFCL_REG_OFFSET + MUX_OFFSET,
.shift = 2,
.width = 2,
.parent_map = smux_parent_map,
.clkr.hw.init = &(struct clk_init_data) {
.name = "perfcl_smux",
.parent_data = perfcl_smux_parents,
.num_parents = ARRAY_SIZE(perfcl_smux_parents),
.ops = &clk_regmap_mux_closest_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
static const struct clk_hw *pwrcl_pmux_parents[] = {
[SMUX_INDEX] = &pwrcl_smux.clkr.hw,
[PLL_INDEX] = &pwrcl_pll.clkr.hw,
[ACD_INDEX] = &pwrcl_pll_acd.hw,
[ALT_INDEX] = &pwrcl_alt_pll.clkr.hw,
};
static const struct clk_hw *perfcl_pmux_parents[] = {
[SMUX_INDEX] = &perfcl_smux.clkr.hw,
[PLL_INDEX] = &perfcl_pll.clkr.hw,
[ACD_INDEX] = &perfcl_pll_acd.hw,
[ALT_INDEX] = &perfcl_alt_pll.clkr.hw,
};
static struct clk_cpu_8996_pmux pwrcl_pmux = {
.reg = PWRCL_REG_OFFSET + MUX_OFFSET,
.nb.notifier_call = cpu_clk_notifier_cb,
.clkr.hw.init = &(struct clk_init_data) {
.name = "pwrcl_pmux",
.parent_hws = pwrcl_pmux_parents,
.num_parents = ARRAY_SIZE(pwrcl_pmux_parents),
.ops = &clk_cpu_8996_pmux_ops,
/* CPU clock is critical and should never be gated */
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
},
};
static struct clk_cpu_8996_pmux perfcl_pmux = {
.reg = PERFCL_REG_OFFSET + MUX_OFFSET,
.nb.notifier_call = cpu_clk_notifier_cb,
.clkr.hw.init = &(struct clk_init_data) {
.name = "perfcl_pmux",
.parent_hws = perfcl_pmux_parents,
.num_parents = ARRAY_SIZE(perfcl_pmux_parents),
.ops = &clk_cpu_8996_pmux_ops,
/* CPU clock is critical and should never be gated */
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
},
};
static const struct regmap_config cpu_msm8996_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.max_register = 0x80210,
.fast_io = true,
.val_format_endian = REGMAP_ENDIAN_LITTLE,
};
static struct clk_hw *cpu_msm8996_hw_clks[] = {
&pwrcl_pll_postdiv.hw,
&perfcl_pll_postdiv.hw,
&pwrcl_pll_acd.hw,
&perfcl_pll_acd.hw,
};
static struct clk_regmap *cpu_msm8996_clks[] = {
&pwrcl_pll.clkr,
&perfcl_pll.clkr,
&pwrcl_alt_pll.clkr,
&perfcl_alt_pll.clkr,
&pwrcl_smux.clkr,
&perfcl_smux.clkr,
&pwrcl_pmux.clkr,
&perfcl_pmux.clkr,
};
static void qcom_cpu_clk_msm8996_acd_init(struct regmap *regmap);
static int qcom_cpu_clk_msm8996_register_clks(struct device *dev,
struct regmap *regmap)
{
int i, ret;
/* Select GPLL0 for 300MHz for both clusters */
regmap_write(regmap, PERFCL_REG_OFFSET + MUX_OFFSET, 0xc);
regmap_write(regmap, PWRCL_REG_OFFSET + MUX_OFFSET, 0xc);
/* Ensure write goes through before PLLs are reconfigured */
udelay(5);
/* Set the auto clock sel always-on source to GPLL0/2 (300MHz) */
regmap_update_bits(regmap, PWRCL_REG_OFFSET + MUX_OFFSET,
MUX_AUTO_CLK_SEL_ALWAYS_ON_MASK,
MUX_AUTO_CLK_SEL_ALWAYS_ON_GPLL0_SEL);
regmap_update_bits(regmap, PERFCL_REG_OFFSET + MUX_OFFSET,
MUX_AUTO_CLK_SEL_ALWAYS_ON_MASK,
MUX_AUTO_CLK_SEL_ALWAYS_ON_GPLL0_SEL);
clk_alpha_pll_configure(&pwrcl_pll, regmap, &hfpll_config);
clk_alpha_pll_configure(&perfcl_pll, regmap, &hfpll_config);
clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
/* Wait for PLL(s) to lock */
udelay(50);
/* Enable auto clock selection for both clusters */
regmap_update_bits(regmap, PWRCL_REG_OFFSET + CLK_CTL_OFFSET,
CLK_CTL_AUTO_CLK_SEL, CLK_CTL_AUTO_CLK_SEL);
regmap_update_bits(regmap, PERFCL_REG_OFFSET + CLK_CTL_OFFSET,
CLK_CTL_AUTO_CLK_SEL, CLK_CTL_AUTO_CLK_SEL);
/* Ensure write goes through before muxes are switched */
udelay(5);
qcom_cpu_clk_msm8996_acd_init(regmap);
/* Pulse swallower and soft-start settings */
regmap_write(regmap, PWRCL_REG_OFFSET + PSCTL_OFFSET, 0x00030005);
regmap_write(regmap, PERFCL_REG_OFFSET + PSCTL_OFFSET, 0x00030005);
/* Switch clusters to use the ACD leg */
regmap_write(regmap, PWRCL_REG_OFFSET + MUX_OFFSET, 0x32);
regmap_write(regmap, PERFCL_REG_OFFSET + MUX_OFFSET, 0x32);
for (i = 0; i < ARRAY_SIZE(cpu_msm8996_hw_clks); i++) {
ret = devm_clk_hw_register(dev, cpu_msm8996_hw_clks[i]);
if (ret)
return ret;
}
for (i = 0; i < ARRAY_SIZE(cpu_msm8996_clks); i++) {
ret = devm_clk_register_regmap(dev, cpu_msm8996_clks[i]);
if (ret)
return ret;
}
/* Enable alt PLLs */
clk_prepare_enable(pwrcl_alt_pll.clkr.hw.clk);
clk_prepare_enable(perfcl_alt_pll.clkr.hw.clk);
devm_clk_notifier_register(dev, pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb);
devm_clk_notifier_register(dev, perfcl_pmux.clkr.hw.clk, &perfcl_pmux.nb);
return ret;
}
#define CPU_CLUSTER_AFFINITY_MASK 0xf00
#define PWRCL_AFFINITY_MASK 0x000
#define PERFCL_AFFINITY_MASK 0x100
#define L2ACDCR_REG 0x580ULL
#define L2ACDTD_REG 0x581ULL
#define L2ACDDVMRC_REG 0x584ULL
#define L2ACDSSCR_REG 0x589ULL
static DEFINE_SPINLOCK(qcom_clk_acd_lock);
static void qcom_cpu_clk_msm8996_acd_init(struct regmap *regmap)
{
u64 hwid;
u32 val;
unsigned long flags;
spin_lock_irqsave(&qcom_clk_acd_lock, flags);
val = kryo_l2_get_indirect_reg(L2ACDTD_REG);
if (val == 0x00006a11)
goto out;
kryo_l2_set_indirect_reg(L2ACDTD_REG, 0x00006a11);
kryo_l2_set_indirect_reg(L2ACDDVMRC_REG, 0x000e0f0f);
kryo_l2_set_indirect_reg(L2ACDSSCR_REG, 0x00000601);
kryo_l2_set_indirect_reg(L2ACDCR_REG, 0x002c5ffd);
hwid = read_cpuid_mpidr();
if ((hwid & CPU_CLUSTER_AFFINITY_MASK) == PWRCL_AFFINITY_MASK)
regmap_write(regmap, PWRCL_REG_OFFSET + SSSCTL_OFFSET, 0xf);
else
regmap_write(regmap, PERFCL_REG_OFFSET + SSSCTL_OFFSET, 0xf);
out:
spin_unlock_irqrestore(&qcom_clk_acd_lock, flags);
}
static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
void *data)
{
struct clk_cpu_8996_pmux *cpuclk = to_clk_cpu_8996_pmux_nb(nb);
struct clk_notifier_data *cnd = data;
switch (event) {
case PRE_RATE_CHANGE:
qcom_cpu_clk_msm8996_acd_init(cpuclk->clkr.regmap);
/*
* Avoid overvolting. clk_core_set_rate_nolock() walks from top
* to bottom, so it will change the rate of the PLL before
* chaging the parent of PMUX. This can result in pmux getting
* clocked twice the expected rate.
*
* Manually switch to PLL/2 here.
*/
if (cnd->new_rate < DIV_2_THRESHOLD &&
cnd->old_rate > DIV_2_THRESHOLD)
clk_cpu_8996_pmux_set_parent(&cpuclk->clkr.hw, SMUX_INDEX);
break;
case ABORT_RATE_CHANGE:
/* Revert manual change */
if (cnd->new_rate < DIV_2_THRESHOLD &&
cnd->old_rate > DIV_2_THRESHOLD)
clk_cpu_8996_pmux_set_parent(&cpuclk->clkr.hw, ACD_INDEX);
break;
default:
break;
}
return NOTIFY_OK;
};
static int qcom_cpu_clk_msm8996_driver_probe(struct platform_device *pdev)
{
static void __iomem *base;
struct regmap *regmap;
struct clk_hw_onecell_data *data;
struct device *dev = &pdev->dev;
int ret;
data = devm_kzalloc(dev, struct_size(data, hws, 2), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->num = 2;
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
regmap = devm_regmap_init_mmio(dev, base, &cpu_msm8996_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
ret = qcom_cpu_clk_msm8996_register_clks(dev, regmap);
if (ret)
return ret;
data->hws[0] = &pwrcl_pmux.clkr.hw;
data->hws[1] = &perfcl_pmux.clkr.hw;
return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, data);
}
static const struct of_device_id qcom_cpu_clk_msm8996_match_table[] = {
{ .compatible = "qcom,msm8996-apcc" },
{}
};
MODULE_DEVICE_TABLE(of, qcom_cpu_clk_msm8996_match_table);
static struct platform_driver qcom_cpu_clk_msm8996_driver = {
.probe = qcom_cpu_clk_msm8996_driver_probe,
.driver = {
.name = "qcom-msm8996-apcc",
.of_match_table = qcom_cpu_clk_msm8996_match_table,
},
};
module_platform_driver(qcom_cpu_clk_msm8996_driver);
MODULE_DESCRIPTION("QCOM MSM8996 CPU Clock Driver");
MODULE_LICENSE("GPL v2");