blob: 4ec61f1ee71a25dbd90c373068c585b1c9be8577 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
config STMMAC_ETH
tristate "STMicroelectronics Multi-Gigabit Ethernet driver"
depends on HAS_IOMEM && HAS_DMA
depends on PTP_1588_CLOCK_OPTIONAL
select MII
select PCS_XPCS
select PAGE_POOL
select PHYLINK
select CRC32
select RESET_CONTROLLER
help
This is the driver for the Ethernet IPs built around a
Synopsys IP Core.
if STMMAC_ETH
config STMMAC_SELFTESTS
bool "Support for STMMAC Selftests"
depends on INET
depends on STMMAC_ETH
default n
help
This adds support for STMMAC Selftests using ethtool. Enable this
feature if you are facing problems with your HW and submit the test
results to the netdev Mailing List.
config STMMAC_PLATFORM
tristate "STMMAC Platform bus support"
depends on STMMAC_ETH
select MFD_SYSCON
default y
help
This selects the platform specific bus support for the stmmac driver.
This is the driver used on several SoCs:
STi, Allwinner, Amlogic Meson, Altera SOCFPGA.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
if STMMAC_PLATFORM
config DWMAC_DWC_QOS_ETH
tristate "Support for snps,dwc-qos-ethernet.txt DT binding."
select CRC32
select MII
depends on OF && HAS_DMA
help
Support for chips using the snps,dwc-qos-ethernet.txt DT binding.
config DWMAC_GENERIC
tristate "Generic driver for DWMAC"
default STMMAC_PLATFORM
help
Generic DWMAC driver for platforms that don't require any
platform specific code to function or is using platform
data for setup.
config DWMAC_ANARION
tristate "Adaptrum Anarion GMAC support"
default ARC
depends on OF && (ARC || COMPILE_TEST)
help
Support for Adaptrum Anarion GMAC Ethernet controller.
This selects the Anarion SoC glue layer support for the stmmac driver.
config DWMAC_INGENIC
tristate "Ingenic MAC support"
default MACH_INGENIC
depends on OF && HAS_IOMEM && (MACH_INGENIC || COMPILE_TEST)
select MFD_SYSCON
help
Support for ethernet controller on Ingenic SoCs.
This selects Ingenic SoCs glue layer support for the stmmac
device driver. This driver is used on for the Ingenic SoCs
MAC ethernet controller.
config DWMAC_IPQ806X
tristate "QCA IPQ806x DWMAC support"
default ARCH_QCOM
depends on OF && (ARCH_QCOM || COMPILE_TEST)
select MFD_SYSCON
help
Support for QCA IPQ806X DWMAC Ethernet.
This selects the IPQ806x SoC glue layer support for the stmmac
device driver. This driver does not use any of the hardware
acceleration features available on this SoC. Network devices
will behave like standard non-accelerated ethernet interfaces.
Select the QCOM_SOCINFO config flag to enable specific dwmac
fixup based on the ipq806x SoC revision.
config DWMAC_LPC18XX
tristate "NXP LPC18xx/43xx DWMAC support"
default ARCH_LPC18XX
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
select MFD_SYSCON
help
Support for NXP LPC18xx/43xx DWMAC Ethernet.
config DWMAC_MEDIATEK
tristate "MediaTek MT27xx GMAC support"
depends on OF && (ARCH_MEDIATEK || COMPILE_TEST)
help
Support for MediaTek GMAC Ethernet controller.
This selects the MT2712 SoC support for the stmmac driver.
config DWMAC_MESON
tristate "Amlogic Meson dwmac support"
default ARCH_MESON
depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
help
Support for Ethernet controller on Amlogic Meson SoCs.
This selects the Amlogic Meson SoC glue layer support for
the stmmac device driver. This driver is used for Meson6,
Meson8, Meson8b and GXBB SoCs.
config DWMAC_QCOM_ETHQOS
tristate "Qualcomm ETHQOS support"
default ARCH_QCOM
depends on OF && (ARCH_QCOM || COMPILE_TEST)
help
Support for the Qualcomm ETHQOS core.
This selects the Qualcomm ETHQOS glue layer support for the
stmmac device driver.
config DWMAC_ROCKCHIP
tristate "Rockchip dwmac support"
default ARCH_ROCKCHIP
depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
select MFD_SYSCON
help
Support for Ethernet controller on Rockchip RK3288 SoC.
This selects the Rockchip RK3288 SoC glue layer support for
the stmmac device driver.
config DWMAC_SOCFPGA
tristate "SOCFPGA dwmac support"
default ARCH_INTEL_SOCFPGA
depends on OF && (ARCH_INTEL_SOCFPGA || COMPILE_TEST)
select MFD_SYSCON
select MDIO_REGMAP
select REGMAP_MMIO
select PCS_LYNX
help
Support for ethernet controller on Altera SOCFPGA
This selects the Altera SOCFPGA SoC glue layer support
for the stmmac device driver. This driver is used for
arria5 and cyclone5 FPGA SoCs.
config DWMAC_STARFIVE
tristate "StarFive dwmac support"
depends on OF && (ARCH_STARFIVE || COMPILE_TEST)
select MFD_SYSCON
default m if ARCH_STARFIVE
help
Support for ethernet controllers on StarFive RISC-V SoCs
This selects the StarFive platform specific glue layer support
for the stmmac device driver. This driver is used for the
StarFive JH7100 and JH7110 ethernet controllers.
config DWMAC_STI
tristate "STi GMAC support"
default ARCH_STI
depends on OF && (ARCH_STI || COMPILE_TEST)
select MFD_SYSCON
help
Support for ethernet controller on STi SOCs.
This selects STi SoC glue layer support for the stmmac
device driver. This driver is used on for the STi series
SOCs GMAC ethernet controller.
config DWMAC_STM32
tristate "STM32 DWMAC support"
default ARCH_STM32
depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST)
select MFD_SYSCON
help
Support for ethernet controller on STM32 SOCs.
This selects STM32 SoC glue layer support for the stmmac
device driver. This driver is used on for the STM32 series
SOCs GMAC ethernet controller.
config DWMAC_SUNXI
tristate "Allwinner GMAC support"
default ARCH_SUNXI
depends on OF && (ARCH_SUNXI || COMPILE_TEST)
help
Support for Allwinner A20/A31 GMAC ethernet controllers.
This selects Allwinner SoC glue layer support for the
stmmac device driver. This driver is used for A20/A31
GMAC ethernet controller.
config DWMAC_SUN8I
tristate "Allwinner sun8i GMAC support"
default ARCH_SUNXI
depends on OF && (ARCH_SUNXI || COMPILE_TEST)
select MDIO_BUS_MUX
help
Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
This selects Allwinner SoC glue layer support for the
stmmac device driver. This driver is used for H3/A83T/A64
EMAC ethernet controller.
config DWMAC_IMX8
tristate "NXP IMX8 DWMAC support"
default ARCH_MXC
depends on OF && (ARCH_MXC || COMPILE_TEST)
select MFD_SYSCON
help
Support for ethernet controller on NXP i.MX8 SOCs.
This selects NXP SoC glue layer support for the stmmac
device driver. This driver is used for i.MX8 series like
iMX8MP/iMX8DXL GMAC ethernet controller.
config DWMAC_INTEL_PLAT
tristate "Intel dwmac support"
depends on OF && COMMON_CLK
depends on STMMAC_ETH
help
Support for ethernet controllers on Intel SoCs
This selects the Intel platform specific glue layer support for
the stmmac device driver. This driver is used for the Intel Keem Bay
SoC.
config DWMAC_LOONGSON1
tristate "Loongson1 GMAC support"
default MACH_LOONGSON32
depends on OF && (MACH_LOONGSON32 || COMPILE_TEST)
help
Support for ethernet controller on Loongson1 SoC.
This selects Loongson1 SoC glue layer support for the stmmac
device driver. This driver is used for Loongson1-based boards
like Loongson LS1B/LS1C.
config DWMAC_TEGRA
tristate "NVIDIA Tegra MGBE support"
depends on ARCH_TEGRA || COMPILE_TEST
help
This selects the Multi-GigaBit Ethernet (MGBE) Controller that is
found on the NVIDIA Tegra SoC devices. This driver provides the glue
layer on top of the stmmac driver required for these NVIDIA Tegra SoC
devices.
config DWMAC_VISCONTI
tristate "Toshiba Visconti DWMAC support"
default ARCH_VISCONTI
depends on OF && COMMON_CLK && (ARCH_VISCONTI || COMPILE_TEST)
help
Support for ethernet controller on Visconti SoCs.
endif
config DWMAC_INTEL
tristate "Intel GMAC support"
default X86
depends on X86 && STMMAC_ETH && PCI
depends on COMMON_CLK
help
This selects the Intel platform specific bus support for the
stmmac driver. This driver is used for Intel Quark/EHL/TGL.
config DWMAC_LOONGSON
tristate "Loongson PCI DWMAC support"
default MACH_LOONGSON64
depends on (MACH_LOONGSON64 || COMPILE_TEST) && STMMAC_ETH && PCI
depends on COMMON_CLK
help
This selects the LOONGSON PCI bus support for the stmmac driver,
Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge.
config STMMAC_PCI
tristate "STMMAC PCI bus support"
depends on STMMAC_ETH && PCI
depends on COMMON_CLK
help
This selects the platform specific bus support for the stmmac driver.
This driver was tested on XLINX XC2V3000 FF1152AMT0221
D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
endif