blob: afab328d088740fdbe454d4f9d53737fea1371c0 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
* and Cort Dougan (PReP) (cort@cs.nmt.edu)
* Copyright (C) 1996 Paul Mackerras
* PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
*
* Derived from "arch/i386/mm/init.c"
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*/
#include <linux/export.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/gfp.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/memblock.h>
#include <linux/highmem.h>
#include <linux/initrd.h>
#include <linux/pagemap.h>
#include <linux/suspend.h>
#include <linux/hugetlb.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/memremap.h>
#include <linux/dma-direct.h>
#include <linux/kprobes.h>
#include <asm/prom.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
#include <asm/mmu.h>
#include <asm/smp.h>
#include <asm/machdep.h>
#include <asm/btext.h>
#include <asm/tlb.h>
#include <asm/sections.h>
#include <asm/sparsemem.h>
#include <asm/vdso.h>
#include <asm/fixmap.h>
#include <asm/swiotlb.h>
#include <asm/rtas.h>
#include <asm/kasan.h>
#include <asm/svm.h>
#include <asm/mmzone.h>
#include <mm/mmu_decl.h>
static DEFINE_MUTEX(linear_mapping_mutex);
unsigned long long memory_limit;
bool init_mem_is_free;
pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
{
if (ppc_md.phys_mem_access_prot)
return ppc_md.phys_mem_access_prot(file, pfn, size, vma_prot);
if (!page_is_ram(pfn))
vma_prot = pgprot_noncached(vma_prot);
return vma_prot;
}
EXPORT_SYMBOL(phys_mem_access_prot);
#ifdef CONFIG_MEMORY_HOTPLUG
#ifdef CONFIG_NUMA
int memory_add_physaddr_to_nid(u64 start)
{
return hot_add_scn_to_nid(start);
}
#endif
int __weak create_section_mapping(unsigned long start, unsigned long end,
int nid, pgprot_t prot)
{
return -ENODEV;
}
int __weak remove_section_mapping(unsigned long start, unsigned long end)
{
return -ENODEV;
}
#define FLUSH_CHUNK_SIZE SZ_1G
/**
* flush_dcache_range_chunked(): Write any modified data cache blocks out to
* memory and invalidate them, in chunks of up to FLUSH_CHUNK_SIZE
* Does not invalidate the corresponding instruction cache blocks.
*
* @start: the start address
* @stop: the stop address (exclusive)
* @chunk: the max size of the chunks
*/
static void flush_dcache_range_chunked(unsigned long start, unsigned long stop,
unsigned long chunk)
{
unsigned long i;
for (i = start; i < stop; i += chunk) {
flush_dcache_range(i, min(stop, i + chunk));
cond_resched();
}
}
int __ref arch_create_linear_mapping(int nid, u64 start, u64 size,
struct mhp_params *params)
{
int rc;
start = (unsigned long)__va(start);
mutex_lock(&linear_mapping_mutex);
rc = create_section_mapping(start, start + size, nid,
params->pgprot);
mutex_unlock(&linear_mapping_mutex);
if (rc) {
pr_warn("Unable to create linear mapping for 0x%llx..0x%llx: %d\n",
start, start + size, rc);
return -EFAULT;
}
return 0;
}
void __ref arch_remove_linear_mapping(u64 start, u64 size)
{
int ret;
/* Remove htab bolted mappings for this section of memory */
start = (unsigned long)__va(start);
flush_dcache_range_chunked(start, start + size, FLUSH_CHUNK_SIZE);
mutex_lock(&linear_mapping_mutex);
ret = remove_section_mapping(start, start + size);
mutex_unlock(&linear_mapping_mutex);
if (ret)
pr_warn("Unable to remove linear mapping for 0x%llx..0x%llx: %d\n",
start, start + size, ret);
/* Ensure all vmalloc mappings are flushed in case they also
* hit that section of memory
*/
vm_unmap_aliases();
}
int __ref arch_add_memory(int nid, u64 start, u64 size,
struct mhp_params *params)
{
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long nr_pages = size >> PAGE_SHIFT;
int rc;
rc = arch_create_linear_mapping(nid, start, size, params);
if (rc)
return rc;
rc = __add_pages(nid, start_pfn, nr_pages, params);
if (rc)
arch_remove_linear_mapping(start, size);
return rc;
}
void __ref arch_remove_memory(int nid, u64 start, u64 size,
struct vmem_altmap *altmap)
{
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long nr_pages = size >> PAGE_SHIFT;
__remove_pages(start_pfn, nr_pages, altmap);
arch_remove_linear_mapping(start, size);
}
#endif
#ifndef CONFIG_NEED_MULTIPLE_NODES
void __init mem_topology_setup(void)
{
max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
min_low_pfn = MEMORY_START >> PAGE_SHIFT;
#ifdef CONFIG_HIGHMEM
max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
#endif
/* Place all memblock_regions in the same node and merge contiguous
* memblock_regions
*/
memblock_set_node(0, PHYS_ADDR_MAX, &memblock.memory, 0);
}
void __init initmem_init(void)
{
sparse_init();
}
/* mark pages that don't exist as nosave */
static int __init mark_nonram_nosave(void)
{
unsigned long spfn, epfn, prev = 0;
int i;
for_each_mem_pfn_range(i, MAX_NUMNODES, &spfn, &epfn, NULL) {
if (prev && prev < spfn)
register_nosave_region(prev, spfn);
prev = epfn;
}
return 0;
}
#else /* CONFIG_NEED_MULTIPLE_NODES */
static int __init mark_nonram_nosave(void)
{
return 0;
}
#endif
/*
* Zones usage:
*
* We setup ZONE_DMA to be 31-bits on all platforms and ZONE_NORMAL to be
* everything else. GFP_DMA32 page allocations automatically fall back to
* ZONE_DMA.
*
* By using 31-bit unconditionally, we can exploit zone_dma_bits to inform the
* generic DMA mapping code. 32-bit only devices (if not handled by an IOMMU
* anyway) will take a first dip into ZONE_NORMAL and get otherwise served by
* ZONE_DMA.
*/
static unsigned long max_zone_pfns[MAX_NR_ZONES];
/*
* paging_init() sets up the page tables - in fact we've already done this.
*/
void __init paging_init(void)
{
unsigned long long total_ram = memblock_phys_mem_size();
phys_addr_t top_of_ram = memblock_end_of_DRAM();
#ifdef CONFIG_HIGHMEM
unsigned long v = __fix_to_virt(FIX_KMAP_END);
unsigned long end = __fix_to_virt(FIX_KMAP_BEGIN);
for (; v < end; v += PAGE_SIZE)
map_kernel_page(v, 0, __pgprot(0)); /* XXX gross */
map_kernel_page(PKMAP_BASE, 0, __pgprot(0)); /* XXX gross */
pkmap_page_table = virt_to_kpte(PKMAP_BASE);
#endif /* CONFIG_HIGHMEM */
printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%llx\n",
(unsigned long long)top_of_ram, total_ram);
printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(long int)((top_of_ram - total_ram) >> 20));
/*
* Allow 30-bit DMA for very limited Broadcom wifi chips on many
* powerbooks.
*/
if (IS_ENABLED(CONFIG_PPC32))
zone_dma_bits = 30;
else
zone_dma_bits = 31;
#ifdef CONFIG_ZONE_DMA
max_zone_pfns[ZONE_DMA] = min(max_low_pfn,
1UL << (zone_dma_bits - PAGE_SHIFT));
#endif
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_HIGHMEM
max_zone_pfns[ZONE_HIGHMEM] = max_pfn;
#endif
free_area_init(max_zone_pfns);
mark_nonram_nosave();
}
void __init mem_init(void)
{
/*
* book3s is limited to 16 page sizes due to encoding this in
* a 4-bit field for slices.
*/
BUILD_BUG_ON(MMU_PAGE_COUNT > 16);
#ifdef CONFIG_SWIOTLB
/*
* Some platforms (e.g. 85xx) limit DMA-able memory way below
* 4G. We force memblock to bottom-up mode to ensure that the
* memory allocated in swiotlb_init() is DMA-able.
* As it's the last memblock allocation, no need to reset it
* back to to-down.
*/
memblock_set_bottom_up(true);
if (is_secure_guest())
svm_swiotlb_init();
else
swiotlb_init(0);
#endif
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
set_max_mapnr(max_pfn);
kasan_late_init();
memblock_free_all();
#ifdef CONFIG_HIGHMEM
{
unsigned long pfn, highmem_mapnr;
highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
phys_addr_t paddr = (phys_addr_t)pfn << PAGE_SHIFT;
struct page *page = pfn_to_page(pfn);
if (!memblock_is_reserved(paddr))
free_highmem_page(page);
}
}
#endif /* CONFIG_HIGHMEM */
#if defined(CONFIG_PPC_FSL_BOOK3E) && !defined(CONFIG_SMP)
/*
* If smp is enabled, next_tlbcam_idx is initialized in the cpu up
* functions.... do it here for the non-smp case.
*/
per_cpu(next_tlbcam_idx, smp_processor_id()) =
(mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) - 1;
#endif
mem_init_print_info(NULL);
#ifdef CONFIG_PPC32
pr_info("Kernel virtual memory layout:\n");
#ifdef CONFIG_KASAN
pr_info(" * 0x%08lx..0x%08lx : kasan shadow mem\n",
KASAN_SHADOW_START, KASAN_SHADOW_END);
#endif
pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP);
#ifdef CONFIG_HIGHMEM
pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n",
PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP));
#endif /* CONFIG_HIGHMEM */
if (ioremap_bot != IOREMAP_TOP)
pr_info(" * 0x%08lx..0x%08lx : early ioremap\n",
ioremap_bot, IOREMAP_TOP);
pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n",
VMALLOC_START, VMALLOC_END);
#endif /* CONFIG_PPC32 */
}
void free_initmem(void)
{
ppc_md.progress = ppc_printk_progress;
mark_initmem_nx();
init_mem_is_free = true;
free_initmem_default(POISON_FREE_INITMEM);
}
/**
* flush_coherent_icache() - if a CPU has a coherent icache, flush it
* @addr: The base address to use (can be any valid address, the whole cache will be flushed)
* Return true if the cache was flushed, false otherwise
*/
static inline bool flush_coherent_icache(unsigned long addr)
{
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
* before the icbi to order the the actual stores to memory that might
* have modified instructions with the icbi.
*/
if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) {
mb(); /* sync */
allow_read_from_user((const void __user *)addr, L1_CACHE_BYTES);
icbi((void *)addr);
prevent_read_from_user((const void __user *)addr, L1_CACHE_BYTES);
mb(); /* sync */
isync();
return true;
}
return false;
}
/**
* invalidate_icache_range() - Flush the icache by issuing icbi across an address range
* @start: the start address
* @stop: the stop address (exclusive)
*/
static void invalidate_icache_range(unsigned long start, unsigned long stop)
{
unsigned long shift = l1_icache_shift();
unsigned long bytes = l1_icache_bytes();
char *addr = (char *)(start & ~(bytes - 1));
unsigned long size = stop - (unsigned long)addr + (bytes - 1);
unsigned long i;
for (i = 0; i < size >> shift; i++, addr += bytes)
icbi(addr);
mb(); /* sync */
isync();
}
/**
* flush_icache_range: Write any modified data cache blocks out to memory
* and invalidate the corresponding blocks in the instruction cache
*
* Generic code will call this after writing memory, before executing from it.
*
* @start: the start address
* @stop: the stop address (exclusive)
*/
void flush_icache_range(unsigned long start, unsigned long stop)
{
if (flush_coherent_icache(start))
return;
clean_dcache_range(start, stop);
if (IS_ENABLED(CONFIG_44x)) {
/*
* Flash invalidate on 44x because we are passed kmapped
* addresses and this doesn't work for userspace pages due to
* the virtually tagged icache.
*/
iccci((void *)start);
mb(); /* sync */
isync();
} else
invalidate_icache_range(start, stop);
}
EXPORT_SYMBOL(flush_icache_range);
#if !defined(CONFIG_PPC_8xx) && !defined(CONFIG_PPC64)
/**
* flush_dcache_icache_phys() - Flush a page by it's physical address
* @physaddr: the physical address of the page
*/
static void flush_dcache_icache_phys(unsigned long physaddr)
{
unsigned long bytes = l1_dcache_bytes();
unsigned long nb = PAGE_SIZE / bytes;
unsigned long addr = physaddr & PAGE_MASK;
unsigned long msr, msr0;
unsigned long loop1 = addr, loop2 = addr;
msr0 = mfmsr();
msr = msr0 & ~MSR_DR;
/*
* This must remain as ASM to prevent potential memory accesses
* while the data MMU is disabled
*/
asm volatile(
" mtctr %2;\n"
" mtmsr %3;\n"
" isync;\n"
"0: dcbst 0, %0;\n"
" addi %0, %0, %4;\n"
" bdnz 0b;\n"
" sync;\n"
" mtctr %2;\n"
"1: icbi 0, %1;\n"
" addi %1, %1, %4;\n"
" bdnz 1b;\n"
" sync;\n"
" mtmsr %5;\n"
" isync;\n"
: "+&r" (loop1), "+&r" (loop2)
: "r" (nb), "r" (msr), "i" (bytes), "r" (msr0)
: "ctr", "memory");
}
NOKPROBE_SYMBOL(flush_dcache_icache_phys)
#endif // !defined(CONFIG_PPC_8xx) && !defined(CONFIG_PPC64)
/*
* This is called when a page has been modified by the kernel.
* It just marks the page as not i-cache clean. We do the i-cache
* flush later when the page is given to a user process, if necessary.
*/
void flush_dcache_page(struct page *page)
{
if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
return;
/* avoid an atomic op if possible */
if (test_bit(PG_arch_1, &page->flags))
clear_bit(PG_arch_1, &page->flags);
}
EXPORT_SYMBOL(flush_dcache_page);
void flush_dcache_icache_page(struct page *page)
{
#ifdef CONFIG_HUGETLB_PAGE
if (PageCompound(page)) {
flush_dcache_icache_hugepage(page);
return;
}
#endif
#if defined(CONFIG_PPC_8xx) || defined(CONFIG_PPC64)
/* On 8xx there is no need to kmap since highmem is not supported */
__flush_dcache_icache(page_address(page));
#else
if (IS_ENABLED(CONFIG_BOOKE) || sizeof(phys_addr_t) > sizeof(void *)) {
void *start = kmap_atomic(page);
__flush_dcache_icache(start);
kunmap_atomic(start);
} else {
unsigned long addr = page_to_pfn(page) << PAGE_SHIFT;
if (flush_coherent_icache(addr))
return;
flush_dcache_icache_phys(addr);
}
#endif
}
EXPORT_SYMBOL(flush_dcache_icache_page);
/**
* __flush_dcache_icache(): Flush a particular page from the data cache to RAM.
* Note: this is necessary because the instruction cache does *not*
* snoop from the data cache.
*
* @page: the address of the page to flush
*/
void __flush_dcache_icache(void *p)
{
unsigned long addr = (unsigned long)p;
if (flush_coherent_icache(addr))
return;
clean_dcache_range(addr, addr + PAGE_SIZE);
/*
* We don't flush the icache on 44x. Those have a virtual icache and we
* don't have access to the virtual address here (it's not the page
* vaddr but where it's mapped in user space). The flushing of the
* icache on these is handled elsewhere, when a change in the address
* space occurs, before returning to user space.
*/
if (mmu_has_feature(MMU_FTR_TYPE_44x))
return;
invalidate_icache_range(addr, addr + PAGE_SIZE);
}
void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
{
clear_page(page);
/*
* We shouldn't have to do this, but some versions of glibc
* require it (ld.so assumes zero filled pages are icache clean)
* - Anton
*/
flush_dcache_page(pg);
}
EXPORT_SYMBOL(clear_user_page);
void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
struct page *pg)
{
copy_page(vto, vfrom);
/*
* We should be able to use the following optimisation, however
* there are two problems.
* Firstly a bug in some versions of binutils meant PLT sections
* were not marked executable.
* Secondly the first word in the GOT section is blrl, used
* to establish the GOT address. Until recently the GOT was
* not marked executable.
* - Anton
*/
#if 0
if (!vma->vm_file && ((vma->vm_flags & VM_EXEC) == 0))
return;
#endif
flush_dcache_page(pg);
}
void flush_icache_user_page(struct vm_area_struct *vma, struct page *page,
unsigned long addr, int len)
{
unsigned long maddr;
maddr = (unsigned long) kmap(page) + (addr & ~PAGE_MASK);
flush_icache_range(maddr, maddr + len);
kunmap(page);
}
/*
* System memory should not be in /proc/iomem but various tools expect it
* (eg kdump).
*/
static int __init add_system_ram_resources(void)
{
phys_addr_t start, end;
u64 i;
for_each_mem_range(i, &start, &end) {
struct resource *res;
res = kzalloc(sizeof(struct resource), GFP_KERNEL);
WARN_ON(!res);
if (res) {
res->name = "System RAM";
res->start = start;
/*
* In memblock, end points to the first byte after
* the range while in resourses, end points to the
* last byte in the range.
*/
res->end = end - 1;
res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
WARN_ON(request_resource(&iomem_resource, res) < 0);
}
}
return 0;
}
subsys_initcall(add_system_ram_resources);
#ifdef CONFIG_STRICT_DEVMEM
/*
* devmem_is_allowed(): check to see if /dev/mem access to a certain address
* is valid. The argument is a physical page number.
*
* Access has to be given to non-kernel-ram areas as well, these contain the
* PCI mmio resources as well as potential bios/acpi data regions.
*/
int devmem_is_allowed(unsigned long pfn)
{
if (page_is_rtas_user_buf(pfn))
return 1;
if (iomem_is_exclusive(PFN_PHYS(pfn)))
return 0;
if (!page_is_ram(pfn))
return 1;
return 0;
}
#endif /* CONFIG_STRICT_DEVMEM */
/*
* This is defined in kernel/resource.c but only powerpc needs to export it, for
* the EHEA driver. Drop this when drivers/net/ethernet/ibm/ehea is removed.
*/
EXPORT_SYMBOL_GPL(walk_system_ram_range);