| /* |
| * Modifications by Matt Porter (mporter@mvista.com) to support |
| * PPC44x Book E processors. |
| * |
| * This file contains the routines for initializing the MMU |
| * on the 4xx series of chips. |
| * -- paulus |
| * |
| * Derived from arch/ppc/mm/init.c: |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| * |
| * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) |
| * and Cort Dougan (PReP) (cort@cs.nmt.edu) |
| * Copyright (C) 1996 Paul Mackerras |
| * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). |
| * |
| * Derived from "arch/i386/mm/init.c" |
| * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/ptrace.h> |
| #include <linux/mman.h> |
| #include <linux/mm.h> |
| #include <linux/swap.h> |
| #include <linux/stddef.h> |
| #include <linux/vmalloc.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/bootmem.h> |
| #include <linux/highmem.h> |
| |
| #include <asm/pgalloc.h> |
| #include <asm/prom.h> |
| #include <asm/io.h> |
| #include <asm/mmu_context.h> |
| #include <asm/pgtable.h> |
| #include <asm/mmu.h> |
| #include <asm/uaccess.h> |
| #include <asm/smp.h> |
| #include <asm/bootx.h> |
| #include <asm/machdep.h> |
| #include <asm/setup.h> |
| |
| #include "mmu_decl.h" |
| |
| extern char etext[], _stext[]; |
| |
| /* Used by the 44x TLB replacement exception handler. |
| * Just needed it declared someplace. |
| */ |
| unsigned int tlb_44x_index = 0; |
| unsigned int tlb_44x_hwater = 62; |
| |
| /* |
| * "Pins" a 256MB TLB entry in AS0 for kernel lowmem |
| */ |
| static void __init |
| ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys) |
| { |
| unsigned long attrib = 0; |
| |
| __asm__ __volatile__("\ |
| clrrwi %2,%2,10\n\ |
| ori %2,%2,%4\n\ |
| clrrwi %1,%1,10\n\ |
| li %0,0\n\ |
| ori %0,%0,%5\n\ |
| tlbwe %2,%3,%6\n\ |
| tlbwe %1,%3,%7\n\ |
| tlbwe %0,%3,%8" |
| : |
| : "r" (attrib), "r" (phys), "r" (virt), "r" (slot), |
| "i" (PPC44x_TLB_VALID | PPC44x_TLB_256M), |
| "i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G), |
| "i" (PPC44x_TLB_PAGEID), |
| "i" (PPC44x_TLB_XLAT), |
| "i" (PPC44x_TLB_ATTRIB)); |
| } |
| |
| /* |
| * MMU_init_hw does the chip-specific initialization of the MMU hardware. |
| */ |
| void __init MMU_init_hw(void) |
| { |
| flush_instruction_cache(); |
| } |
| |
| unsigned long __init mmu_mapin_ram(void) |
| { |
| unsigned int pinned_tlbs = 1; |
| int i; |
| |
| /* Determine number of entries necessary to cover lowmem */ |
| pinned_tlbs = (unsigned int) |
| (_ALIGN(total_lowmem, PPC44x_PIN_SIZE) >> PPC44x_PIN_SHIFT); |
| |
| /* Write upper watermark to save location */ |
| tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs; |
| |
| /* If necessary, set additional pinned TLBs */ |
| if (pinned_tlbs > 1) |
| for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) { |
| unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC44x_PIN_SIZE; |
| ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr); |
| } |
| |
| return total_lowmem; |
| } |