| /* |
| * Alchemy Semi Au1000 IrDA driver |
| * |
| * Copyright 2001 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. |
| * ppopov@mvista.com or source@mvista.com |
| * |
| * This program is free software; you can distribute it and/or modify it |
| * under the terms of the GNU General Public License (Version 2) as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| */ |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/netdevice.h> |
| #include <linux/slab.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/interrupt.h> |
| #include <linux/pm.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| #include <asm/au1000.h> |
| #if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) |
| #include <asm/pb1000.h> |
| #elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) |
| #include <asm/db1x00.h> |
| #else |
| #error au1k_ir: unsupported board |
| #endif |
| |
| #include <net/irda/irda.h> |
| #include <net/irda/irmod.h> |
| #include <net/irda/wrapper.h> |
| #include <net/irda/irda_device.h> |
| #include "au1000_ircc.h" |
| |
| static int au1k_irda_net_init(struct net_device *); |
| static int au1k_irda_start(struct net_device *); |
| static int au1k_irda_stop(struct net_device *dev); |
| static int au1k_irda_hard_xmit(struct sk_buff *, struct net_device *); |
| static int au1k_irda_rx(struct net_device *); |
| static void au1k_irda_interrupt(int, void *); |
| static void au1k_tx_timeout(struct net_device *); |
| static int au1k_irda_ioctl(struct net_device *, struct ifreq *, int); |
| static int au1k_irda_set_speed(struct net_device *dev, int speed); |
| |
| static void *dma_alloc(size_t, dma_addr_t *); |
| static void dma_free(void *, size_t); |
| |
| static int qos_mtt_bits = 0x07; /* 1 ms or more */ |
| static struct net_device *ir_devs[NUM_IR_IFF]; |
| static char version[] __devinitdata = |
| "au1k_ircc:1.2 ppopov@mvista.com\n"; |
| |
| #define RUN_AT(x) (jiffies + (x)) |
| |
| #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) |
| static BCSR * const bcsr = (BCSR *)0xAE000000; |
| #endif |
| |
| static DEFINE_SPINLOCK(ir_lock); |
| |
| /* |
| * IrDA peripheral bug. You have to read the register |
| * twice to get the right value. |
| */ |
| u32 read_ir_reg(u32 addr) |
| { |
| readl(addr); |
| return readl(addr); |
| } |
| |
| |
| /* |
| * Buffer allocation/deallocation routines. The buffer descriptor returned |
| * has the virtual and dma address of a buffer suitable for |
| * both, receive and transmit operations. |
| */ |
| static db_dest_t *GetFreeDB(struct au1k_private *aup) |
| { |
| db_dest_t *pDB; |
| pDB = aup->pDBfree; |
| |
| if (pDB) { |
| aup->pDBfree = pDB->pnext; |
| } |
| return pDB; |
| } |
| |
| static void ReleaseDB(struct au1k_private *aup, db_dest_t *pDB) |
| { |
| db_dest_t *pDBfree = aup->pDBfree; |
| if (pDBfree) |
| pDBfree->pnext = pDB; |
| aup->pDBfree = pDB; |
| } |
| |
| |
| /* |
| DMA memory allocation, derived from pci_alloc_consistent. |
| However, the Au1000 data cache is coherent (when programmed |
| so), therefore we return KSEG0 address, not KSEG1. |
| */ |
| static void *dma_alloc(size_t size, dma_addr_t * dma_handle) |
| { |
| void *ret; |
| int gfp = GFP_ATOMIC | GFP_DMA; |
| |
| ret = (void *) __get_free_pages(gfp, get_order(size)); |
| |
| if (ret != NULL) { |
| memset(ret, 0, size); |
| *dma_handle = virt_to_bus(ret); |
| ret = (void *)KSEG0ADDR(ret); |
| } |
| return ret; |
| } |
| |
| |
| static void dma_free(void *vaddr, size_t size) |
| { |
| vaddr = (void *)KSEG0ADDR(vaddr); |
| free_pages((unsigned long) vaddr, get_order(size)); |
| } |
| |
| |
| static void |
| setup_hw_rings(struct au1k_private *aup, u32 rx_base, u32 tx_base) |
| { |
| int i; |
| for (i=0; i<NUM_IR_DESC; i++) { |
| aup->rx_ring[i] = (volatile ring_dest_t *) |
| (rx_base + sizeof(ring_dest_t)*i); |
| } |
| for (i=0; i<NUM_IR_DESC; i++) { |
| aup->tx_ring[i] = (volatile ring_dest_t *) |
| (tx_base + sizeof(ring_dest_t)*i); |
| } |
| } |
| |
| static int au1k_irda_init(void) |
| { |
| static unsigned version_printed = 0; |
| struct au1k_private *aup; |
| struct net_device *dev; |
| int err; |
| |
| if (version_printed++ == 0) printk(version); |
| |
| dev = alloc_irdadev(sizeof(struct au1k_private)); |
| if (!dev) |
| return -ENOMEM; |
| |
| dev->irq = AU1000_IRDA_RX_INT; /* TX has its own interrupt */ |
| err = au1k_irda_net_init(dev); |
| if (err) |
| goto out; |
| err = register_netdev(dev); |
| if (err) |
| goto out1; |
| ir_devs[0] = dev; |
| printk(KERN_INFO "IrDA: Registered device %s\n", dev->name); |
| return 0; |
| |
| out1: |
| aup = netdev_priv(dev); |
| dma_free((void *)aup->db[0].vaddr, |
| MAX_BUF_SIZE * 2*NUM_IR_DESC); |
| dma_free((void *)aup->rx_ring[0], |
| 2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t))); |
| kfree(aup->rx_buff.head); |
| out: |
| free_netdev(dev); |
| return err; |
| } |
| |
| static int au1k_irda_init_iobuf(iobuff_t *io, int size) |
| { |
| io->head = kmalloc(size, GFP_KERNEL); |
| if (io->head != NULL) { |
| io->truesize = size; |
| io->in_frame = FALSE; |
| io->state = OUTSIDE_FRAME; |
| io->data = io->head; |
| } |
| return io->head ? 0 : -ENOMEM; |
| } |
| |
| static int au1k_irda_net_init(struct net_device *dev) |
| { |
| struct au1k_private *aup = netdev_priv(dev); |
| int i, retval = 0, err; |
| db_dest_t *pDB, *pDBfree; |
| dma_addr_t temp; |
| |
| err = au1k_irda_init_iobuf(&aup->rx_buff, 14384); |
| if (err) |
| goto out1; |
| |
| dev->open = au1k_irda_start; |
| dev->hard_start_xmit = au1k_irda_hard_xmit; |
| dev->stop = au1k_irda_stop; |
| dev->do_ioctl = au1k_irda_ioctl; |
| dev->tx_timeout = au1k_tx_timeout; |
| |
| irda_init_max_qos_capabilies(&aup->qos); |
| |
| /* The only value we must override it the baudrate */ |
| aup->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| |
| IR_115200|IR_576000 |(IR_4000000 << 8); |
| |
| aup->qos.min_turn_time.bits = qos_mtt_bits; |
| irda_qos_bits_to_value(&aup->qos); |
| |
| retval = -ENOMEM; |
| |
| /* Tx ring follows rx ring + 512 bytes */ |
| /* we need a 1k aligned buffer */ |
| aup->rx_ring[0] = (ring_dest_t *) |
| dma_alloc(2*MAX_NUM_IR_DESC*(sizeof(ring_dest_t)), &temp); |
| if (!aup->rx_ring[0]) |
| goto out2; |
| |
| /* allocate the data buffers */ |
| aup->db[0].vaddr = |
| (void *)dma_alloc(MAX_BUF_SIZE * 2*NUM_IR_DESC, &temp); |
| if (!aup->db[0].vaddr) |
| goto out3; |
| |
| setup_hw_rings(aup, (u32)aup->rx_ring[0], (u32)aup->rx_ring[0] + 512); |
| |
| pDBfree = NULL; |
| pDB = aup->db; |
| for (i=0; i<(2*NUM_IR_DESC); i++) { |
| pDB->pnext = pDBfree; |
| pDBfree = pDB; |
| pDB->vaddr = |
| (u32 *)((unsigned)aup->db[0].vaddr + MAX_BUF_SIZE*i); |
| pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr); |
| pDB++; |
| } |
| aup->pDBfree = pDBfree; |
| |
| /* attach a data buffer to each descriptor */ |
| for (i=0; i<NUM_IR_DESC; i++) { |
| pDB = GetFreeDB(aup); |
| if (!pDB) goto out; |
| aup->rx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff); |
| aup->rx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff); |
| aup->rx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff); |
| aup->rx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff); |
| aup->rx_db_inuse[i] = pDB; |
| } |
| for (i=0; i<NUM_IR_DESC; i++) { |
| pDB = GetFreeDB(aup); |
| if (!pDB) goto out; |
| aup->tx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff); |
| aup->tx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff); |
| aup->tx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff); |
| aup->tx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff); |
| aup->tx_ring[i]->count_0 = 0; |
| aup->tx_ring[i]->count_1 = 0; |
| aup->tx_ring[i]->flags = 0; |
| aup->tx_db_inuse[i] = pDB; |
| } |
| |
| #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) |
| /* power on */ |
| bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK; |
| bcsr->resets |= BCSR_RESETS_IRDA_MODE_FULL; |
| au_sync(); |
| #endif |
| |
| return 0; |
| |
| out3: |
| dma_free((void *)aup->rx_ring[0], |
| 2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t))); |
| out2: |
| kfree(aup->rx_buff.head); |
| out1: |
| printk(KERN_ERR "au1k_init_module failed. Returns %d\n", retval); |
| return retval; |
| } |
| |
| |
| static int au1k_init(struct net_device *dev) |
| { |
| struct au1k_private *aup = netdev_priv(dev); |
| int i; |
| u32 control; |
| u32 ring_address; |
| |
| /* bring the device out of reset */ |
| control = 0xe; /* coherent, clock enable, one half system clock */ |
| |
| #ifndef CONFIG_CPU_LITTLE_ENDIAN |
| control |= 1; |
| #endif |
| aup->tx_head = 0; |
| aup->tx_tail = 0; |
| aup->rx_head = 0; |
| |
| for (i=0; i<NUM_IR_DESC; i++) { |
| aup->rx_ring[i]->flags = AU_OWN; |
| } |
| |
| writel(control, IR_INTERFACE_CONFIG); |
| au_sync_delay(10); |
| |
| writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE); /* disable PHY */ |
| au_sync_delay(1); |
| |
| writel(MAX_BUF_SIZE, IR_MAX_PKT_LEN); |
| |
| ring_address = (u32)virt_to_phys((void *)aup->rx_ring[0]); |
| writel(ring_address >> 26, IR_RING_BASE_ADDR_H); |
| writel((ring_address >> 10) & 0xffff, IR_RING_BASE_ADDR_L); |
| |
| writel(RING_SIZE_64<<8 | RING_SIZE_64<<12, IR_RING_SIZE); |
| |
| writel(1<<2 | IR_ONE_PIN, IR_CONFIG_2); /* 48MHz */ |
| writel(0, IR_RING_ADDR_CMPR); |
| |
| au1k_irda_set_speed(dev, 9600); |
| return 0; |
| } |
| |
| static int au1k_irda_start(struct net_device *dev) |
| { |
| int retval; |
| char hwname[32]; |
| struct au1k_private *aup = netdev_priv(dev); |
| |
| if ((retval = au1k_init(dev))) { |
| printk(KERN_ERR "%s: error in au1k_init\n", dev->name); |
| return retval; |
| } |
| |
| if ((retval = request_irq(AU1000_IRDA_TX_INT, &au1k_irda_interrupt, |
| 0, dev->name, dev))) { |
| printk(KERN_ERR "%s: unable to get IRQ %d\n", |
| dev->name, dev->irq); |
| return retval; |
| } |
| if ((retval = request_irq(AU1000_IRDA_RX_INT, &au1k_irda_interrupt, |
| 0, dev->name, dev))) { |
| free_irq(AU1000_IRDA_TX_INT, dev); |
| printk(KERN_ERR "%s: unable to get IRQ %d\n", |
| dev->name, dev->irq); |
| return retval; |
| } |
| |
| /* Give self a hardware name */ |
| sprintf(hwname, "Au1000 SIR/FIR"); |
| aup->irlap = irlap_open(dev, &aup->qos, hwname); |
| netif_start_queue(dev); |
| |
| writel(read_ir_reg(IR_CONFIG_2) | 1<<8, IR_CONFIG_2); /* int enable */ |
| |
| aup->timer.expires = RUN_AT((3*HZ)); |
| aup->timer.data = (unsigned long)dev; |
| return 0; |
| } |
| |
| static int au1k_irda_stop(struct net_device *dev) |
| { |
| struct au1k_private *aup = netdev_priv(dev); |
| |
| /* disable interrupts */ |
| writel(read_ir_reg(IR_CONFIG_2) & ~(1<<8), IR_CONFIG_2); |
| writel(0, IR_CONFIG_1); |
| writel(0, IR_INTERFACE_CONFIG); /* disable clock */ |
| au_sync(); |
| |
| if (aup->irlap) { |
| irlap_close(aup->irlap); |
| aup->irlap = NULL; |
| } |
| |
| netif_stop_queue(dev); |
| del_timer(&aup->timer); |
| |
| /* disable the interrupt */ |
| free_irq(AU1000_IRDA_TX_INT, dev); |
| free_irq(AU1000_IRDA_RX_INT, dev); |
| return 0; |
| } |
| |
| static void __exit au1k_irda_exit(void) |
| { |
| struct net_device *dev = ir_devs[0]; |
| struct au1k_private *aup = netdev_priv(dev); |
| |
| unregister_netdev(dev); |
| |
| dma_free((void *)aup->db[0].vaddr, |
| MAX_BUF_SIZE * 2*NUM_IR_DESC); |
| dma_free((void *)aup->rx_ring[0], |
| 2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t))); |
| kfree(aup->rx_buff.head); |
| free_netdev(dev); |
| } |
| |
| |
| static inline void |
| update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len) |
| { |
| struct au1k_private *aup = netdev_priv(dev); |
| struct net_device_stats *ps = &aup->stats; |
| |
| ps->tx_packets++; |
| ps->tx_bytes += pkt_len; |
| |
| if (status & IR_TX_ERROR) { |
| ps->tx_errors++; |
| ps->tx_aborted_errors++; |
| } |
| } |
| |
| |
| static void au1k_tx_ack(struct net_device *dev) |
| { |
| struct au1k_private *aup = netdev_priv(dev); |
| volatile ring_dest_t *ptxd; |
| |
| ptxd = aup->tx_ring[aup->tx_tail]; |
| while (!(ptxd->flags & AU_OWN) && (aup->tx_tail != aup->tx_head)) { |
| update_tx_stats(dev, ptxd->flags, |
| ptxd->count_1<<8 | ptxd->count_0); |
| ptxd->count_0 = 0; |
| ptxd->count_1 = 0; |
| au_sync(); |
| |
| aup->tx_tail = (aup->tx_tail + 1) & (NUM_IR_DESC - 1); |
| ptxd = aup->tx_ring[aup->tx_tail]; |
| |
| if (aup->tx_full) { |
| aup->tx_full = 0; |
| netif_wake_queue(dev); |
| } |
| } |
| |
| if (aup->tx_tail == aup->tx_head) { |
| if (aup->newspeed) { |
| au1k_irda_set_speed(dev, aup->newspeed); |
| aup->newspeed = 0; |
| } |
| else { |
| writel(read_ir_reg(IR_CONFIG_1) & ~IR_TX_ENABLE, |
| IR_CONFIG_1); |
| au_sync(); |
| writel(read_ir_reg(IR_CONFIG_1) | IR_RX_ENABLE, |
| IR_CONFIG_1); |
| writel(0, IR_RING_PROMPT); |
| au_sync(); |
| } |
| } |
| } |
| |
| |
| /* |
| * Au1000 transmit routine. |
| */ |
| static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct au1k_private *aup = netdev_priv(dev); |
| int speed = irda_get_next_speed(skb); |
| volatile ring_dest_t *ptxd; |
| u32 len; |
| |
| u32 flags; |
| db_dest_t *pDB; |
| |
| if (speed != aup->speed && speed != -1) { |
| aup->newspeed = speed; |
| } |
| |
| if ((skb->len == 0) && (aup->newspeed)) { |
| if (aup->tx_tail == aup->tx_head) { |
| au1k_irda_set_speed(dev, speed); |
| aup->newspeed = 0; |
| } |
| dev_kfree_skb(skb); |
| return 0; |
| } |
| |
| ptxd = aup->tx_ring[aup->tx_head]; |
| flags = ptxd->flags; |
| |
| if (flags & AU_OWN) { |
| printk(KERN_DEBUG "%s: tx_full\n", dev->name); |
| netif_stop_queue(dev); |
| aup->tx_full = 1; |
| return 1; |
| } |
| else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) { |
| printk(KERN_DEBUG "%s: tx_full\n", dev->name); |
| netif_stop_queue(dev); |
| aup->tx_full = 1; |
| return 1; |
| } |
| |
| pDB = aup->tx_db_inuse[aup->tx_head]; |
| |
| #if 0 |
| if (read_ir_reg(IR_RX_BYTE_CNT) != 0) { |
| printk("tx warning: rx byte cnt %x\n", |
| read_ir_reg(IR_RX_BYTE_CNT)); |
| } |
| #endif |
| |
| if (aup->speed == 4000000) { |
| /* FIR */ |
| skb_copy_from_linear_data(skb, pDB->vaddr, skb->len); |
| ptxd->count_0 = skb->len & 0xff; |
| ptxd->count_1 = (skb->len >> 8) & 0xff; |
| |
| } |
| else { |
| /* SIR */ |
| len = async_wrap_skb(skb, (u8 *)pDB->vaddr, MAX_BUF_SIZE); |
| ptxd->count_0 = len & 0xff; |
| ptxd->count_1 = (len >> 8) & 0xff; |
| ptxd->flags |= IR_DIS_CRC; |
| au_writel(au_readl(0xae00000c) & ~(1<<13), 0xae00000c); |
| } |
| ptxd->flags |= AU_OWN; |
| au_sync(); |
| |
| writel(read_ir_reg(IR_CONFIG_1) | IR_TX_ENABLE, IR_CONFIG_1); |
| writel(0, IR_RING_PROMPT); |
| au_sync(); |
| |
| dev_kfree_skb(skb); |
| aup->tx_head = (aup->tx_head + 1) & (NUM_IR_DESC - 1); |
| dev->trans_start = jiffies; |
| return 0; |
| } |
| |
| |
| static inline void |
| update_rx_stats(struct net_device *dev, u32 status, u32 count) |
| { |
| struct au1k_private *aup = netdev_priv(dev); |
| struct net_device_stats *ps = &aup->stats; |
| |
| ps->rx_packets++; |
| |
| if (status & IR_RX_ERROR) { |
| ps->rx_errors++; |
| if (status & (IR_PHY_ERROR|IR_FIFO_OVER)) |
| ps->rx_missed_errors++; |
| if (status & IR_MAX_LEN) |
| ps->rx_length_errors++; |
| if (status & IR_CRC_ERROR) |
| ps->rx_crc_errors++; |
| } |
| else |
| ps->rx_bytes += count; |
| } |
| |
| /* |
| * Au1000 receive routine. |
| */ |
| static int au1k_irda_rx(struct net_device *dev) |
| { |
| struct au1k_private *aup = netdev_priv(dev); |
| struct sk_buff *skb; |
| volatile ring_dest_t *prxd; |
| u32 flags, count; |
| db_dest_t *pDB; |
| |
| prxd = aup->rx_ring[aup->rx_head]; |
| flags = prxd->flags; |
| |
| while (!(flags & AU_OWN)) { |
| pDB = aup->rx_db_inuse[aup->rx_head]; |
| count = prxd->count_1<<8 | prxd->count_0; |
| if (!(flags & IR_RX_ERROR)) { |
| /* good frame */ |
| update_rx_stats(dev, flags, count); |
| skb=alloc_skb(count+1,GFP_ATOMIC); |
| if (skb == NULL) { |
| aup->netdev->stats.rx_dropped++; |
| continue; |
| } |
| skb_reserve(skb, 1); |
| if (aup->speed == 4000000) |
| skb_put(skb, count); |
| else |
| skb_put(skb, count-2); |
| skb_copy_to_linear_data(skb, pDB->vaddr, count - 2); |
| skb->dev = dev; |
| skb_reset_mac_header(skb); |
| skb->protocol = htons(ETH_P_IRDA); |
| netif_rx(skb); |
| prxd->count_0 = 0; |
| prxd->count_1 = 0; |
| } |
| prxd->flags |= AU_OWN; |
| aup->rx_head = (aup->rx_head + 1) & (NUM_IR_DESC - 1); |
| writel(0, IR_RING_PROMPT); |
| au_sync(); |
| |
| /* next descriptor */ |
| prxd = aup->rx_ring[aup->rx_head]; |
| flags = prxd->flags; |
| |
| } |
| return 0; |
| } |
| |
| |
| static irqreturn_t au1k_irda_interrupt(int dummy, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| |
| writel(0, IR_INT_CLEAR); /* ack irda interrupts */ |
| |
| au1k_irda_rx(dev); |
| au1k_tx_ack(dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| /* |
| * The Tx ring has been full longer than the watchdog timeout |
| * value. The transmitter must be hung? |
| */ |
| static void au1k_tx_timeout(struct net_device *dev) |
| { |
| u32 speed; |
| struct au1k_private *aup = netdev_priv(dev); |
| |
| printk(KERN_ERR "%s: tx timeout\n", dev->name); |
| speed = aup->speed; |
| aup->speed = 0; |
| au1k_irda_set_speed(dev, speed); |
| aup->tx_full = 0; |
| netif_wake_queue(dev); |
| } |
| |
| |
| /* |
| * Set the IrDA communications speed. |
| */ |
| static int |
| au1k_irda_set_speed(struct net_device *dev, int speed) |
| { |
| unsigned long flags; |
| struct au1k_private *aup = netdev_priv(dev); |
| u32 control; |
| int ret = 0, timeout = 10, i; |
| volatile ring_dest_t *ptxd; |
| #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) |
| unsigned long irda_resets; |
| #endif |
| |
| if (speed == aup->speed) |
| return ret; |
| |
| spin_lock_irqsave(&ir_lock, flags); |
| |
| /* disable PHY first */ |
| writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE); |
| |
| /* disable RX/TX */ |
| writel(read_ir_reg(IR_CONFIG_1) & ~(IR_RX_ENABLE|IR_TX_ENABLE), |
| IR_CONFIG_1); |
| au_sync_delay(1); |
| while (read_ir_reg(IR_ENABLE) & (IR_RX_STATUS | IR_TX_STATUS)) { |
| mdelay(1); |
| if (!timeout--) { |
| printk(KERN_ERR "%s: rx/tx disable timeout\n", |
| dev->name); |
| break; |
| } |
| } |
| |
| /* disable DMA */ |
| writel(read_ir_reg(IR_CONFIG_1) & ~IR_DMA_ENABLE, IR_CONFIG_1); |
| au_sync_delay(1); |
| |
| /* |
| * After we disable tx/rx. the index pointers |
| * go back to zero. |
| */ |
| aup->tx_head = aup->tx_tail = aup->rx_head = 0; |
| for (i=0; i<NUM_IR_DESC; i++) { |
| ptxd = aup->tx_ring[i]; |
| ptxd->flags = 0; |
| ptxd->count_0 = 0; |
| ptxd->count_1 = 0; |
| } |
| |
| for (i=0; i<NUM_IR_DESC; i++) { |
| ptxd = aup->rx_ring[i]; |
| ptxd->count_0 = 0; |
| ptxd->count_1 = 0; |
| ptxd->flags = AU_OWN; |
| } |
| |
| if (speed == 4000000) { |
| #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) |
| bcsr->resets |= BCSR_RESETS_FIR_SEL; |
| #else /* Pb1000 and Pb1100 */ |
| writel(1<<13, CPLD_AUX1); |
| #endif |
| } |
| else { |
| #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) |
| bcsr->resets &= ~BCSR_RESETS_FIR_SEL; |
| #else /* Pb1000 and Pb1100 */ |
| writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1); |
| #endif |
| } |
| |
| switch (speed) { |
| case 9600: |
| writel(11<<10 | 12<<5, IR_WRITE_PHY_CONFIG); |
| writel(IR_SIR_MODE, IR_CONFIG_1); |
| break; |
| case 19200: |
| writel(5<<10 | 12<<5, IR_WRITE_PHY_CONFIG); |
| writel(IR_SIR_MODE, IR_CONFIG_1); |
| break; |
| case 38400: |
| writel(2<<10 | 12<<5, IR_WRITE_PHY_CONFIG); |
| writel(IR_SIR_MODE, IR_CONFIG_1); |
| break; |
| case 57600: |
| writel(1<<10 | 12<<5, IR_WRITE_PHY_CONFIG); |
| writel(IR_SIR_MODE, IR_CONFIG_1); |
| break; |
| case 115200: |
| writel(12<<5, IR_WRITE_PHY_CONFIG); |
| writel(IR_SIR_MODE, IR_CONFIG_1); |
| break; |
| case 4000000: |
| writel(0xF, IR_WRITE_PHY_CONFIG); |
| writel(IR_FIR|IR_DMA_ENABLE|IR_RX_ENABLE, IR_CONFIG_1); |
| break; |
| default: |
| printk(KERN_ERR "%s unsupported speed %x\n", dev->name, speed); |
| ret = -EINVAL; |
| break; |
| } |
| |
| aup->speed = speed; |
| writel(read_ir_reg(IR_ENABLE) | 0x8000, IR_ENABLE); |
| au_sync(); |
| |
| control = read_ir_reg(IR_ENABLE); |
| writel(0, IR_RING_PROMPT); |
| au_sync(); |
| |
| if (control & (1<<14)) { |
| printk(KERN_ERR "%s: configuration error\n", dev->name); |
| } |
| else { |
| if (control & (1<<11)) |
| printk(KERN_DEBUG "%s Valid SIR config\n", dev->name); |
| if (control & (1<<12)) |
| printk(KERN_DEBUG "%s Valid MIR config\n", dev->name); |
| if (control & (1<<13)) |
| printk(KERN_DEBUG "%s Valid FIR config\n", dev->name); |
| if (control & (1<<10)) |
| printk(KERN_DEBUG "%s TX enabled\n", dev->name); |
| if (control & (1<<9)) |
| printk(KERN_DEBUG "%s RX enabled\n", dev->name); |
| } |
| |
| spin_unlock_irqrestore(&ir_lock, flags); |
| return ret; |
| } |
| |
| static int |
| au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) |
| { |
| struct if_irda_req *rq = (struct if_irda_req *)ifreq; |
| struct au1k_private *aup = netdev_priv(dev); |
| int ret = -EOPNOTSUPP; |
| |
| switch (cmd) { |
| case SIOCSBANDWIDTH: |
| if (capable(CAP_NET_ADMIN)) { |
| /* |
| * We are unable to set the speed if the |
| * device is not running. |
| */ |
| if (aup->open) |
| ret = au1k_irda_set_speed(dev, |
| rq->ifr_baudrate); |
| else { |
| printk(KERN_ERR "%s ioctl: !netif_running\n", |
| dev->name); |
| ret = 0; |
| } |
| } |
| break; |
| |
| case SIOCSMEDIABUSY: |
| ret = -EPERM; |
| if (capable(CAP_NET_ADMIN)) { |
| irda_device_set_media_busy(dev, TRUE); |
| ret = 0; |
| } |
| break; |
| |
| case SIOCGRECEIVING: |
| rq->ifr_receiving = 0; |
| break; |
| default: |
| break; |
| } |
| return ret; |
| } |
| |
| MODULE_AUTHOR("Pete Popov <ppopov@mvista.com>"); |
| MODULE_DESCRIPTION("Au1000 IrDA Device Driver"); |
| |
| module_init(au1k_irda_init); |
| module_exit(au1k_irda_exit); |