| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: MediaTek Display Padding |
| |
| maintainers: |
| - Chun-Kuang Hu <chunkuang.hu@kernel.org> |
| - Philipp Zabel <p.zabel@pengutronix.de> |
| |
| description: |
| Padding provides ability to add pixels to width and height of a layer with |
| specified colors. Due to hardware design, Mixer in VDOSYS1 requires |
| width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled, |
| we need Padding to deal with odd width. |
| Please notice that even if the Padding is in bypass mode, settings in |
| register must be cleared to 0, or undefined behaviors could happen. |
| |
| properties: |
| compatible: |
| enum: |
| - mediatek,mt8188-disp-padding |
| - mediatek,mt8195-mdp3-padding |
| |
| reg: |
| maxItems: 1 |
| |
| power-domains: |
| maxItems: 1 |
| |
| clocks: |
| items: |
| - description: Padding's clocks |
| |
| mediatek,gce-client-reg: |
| description: |
| GCE (Global Command Engine) is a multi-core micro processor that helps |
| its clients to execute commands without interrupting CPU. This property |
| describes GCE client's information that is composed by 4 fields. |
| 1. Phandle of the GCE (there may be several GCE processors) |
| 2. Sub-system ID defined in the dt-binding like a user ID |
| (Please refer to include/dt-bindings/gce/<chip>-gce.h) |
| 3. Offset from base address of the subsys you are at |
| 4. Size of the register the client needs |
| $ref: /schemas/types.yaml#/definitions/phandle-array |
| items: |
| items: |
| - description: Phandle of the GCE |
| - description: Subsys ID defined in the dt-binding |
| - description: Offset from base address of the subsys |
| - description: Size of register |
| maxItems: 1 |
| |
| required: |
| - compatible |
| - reg |
| - power-domains |
| - clocks |
| - mediatek,gce-client-reg |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/mediatek,mt8188-clk.h> |
| #include <dt-bindings/power/mediatek,mt8188-power.h> |
| #include <dt-bindings/gce/mt8195-gce.h> |
| |
| soc { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| padding0: padding@1c11d000 { |
| compatible = "mediatek,mt8188-disp-padding"; |
| reg = <0 0x1c11d000 0 0x1000>; |
| clocks = <&vdosys1 CLK_VDO1_PADDING0>; |
| power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>; |
| mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>; |
| }; |
| }; |