blob: 0e4773fc025c9e74f8c86a451e9df60b513ccc8f [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* E3C EC168 DVB USB driver
*
* Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
*/
#include "ec168.h"
#include "ec100.h"
#include "mxl5005s.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
{
int ret;
unsigned int pipe;
u8 request, requesttype;
u8 *buf;
switch (req->cmd) {
case DOWNLOAD_FIRMWARE:
case GPIO:
case WRITE_I2C:
case STREAMING_CTRL:
requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
request = req->cmd;
break;
case READ_I2C:
requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
request = req->cmd;
break;
case GET_CONFIG:
requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
request = CONFIG;
break;
case SET_CONFIG:
requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
request = CONFIG;
break;
case WRITE_DEMOD:
requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
request = DEMOD_RW;
break;
case READ_DEMOD:
requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
request = DEMOD_RW;
break;
default:
dev_err(&d->udev->dev, "%s: unknown command=%02x\n",
KBUILD_MODNAME, req->cmd);
ret = -EINVAL;
goto error;
}
buf = kmalloc(req->size, GFP_KERNEL);
if (!buf) {
ret = -ENOMEM;
goto error;
}
if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
/* write */
memcpy(buf, req->data, req->size);
pipe = usb_sndctrlpipe(d->udev, 0);
} else {
/* read */
pipe = usb_rcvctrlpipe(d->udev, 0);
}
msleep(1); /* avoid I2C errors */
ret = usb_control_msg(d->udev, pipe, request, requesttype, req->value,
req->index, buf, req->size, EC168_USB_TIMEOUT);
dvb_usb_dbg_usb_control_msg(d->udev, request, requesttype, req->value,
req->index, buf, req->size);
if (ret < 0)
goto err_dealloc;
else
ret = 0;
/* read request, copy returned data to return buf */
if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
memcpy(req->data, buf, req->size);
kfree(buf);
return ret;
err_dealloc:
kfree(buf);
error:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
/* I2C */
static struct ec100_config ec168_ec100_config;
static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
struct ec168_req req;
int i = 0;
int ret;
if (num > 2)
return -EINVAL;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
while (i < num) {
if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
if (msg[i].addr == ec168_ec100_config.demod_address) {
if (msg[i].len < 1) {
i = -EOPNOTSUPP;
break;
}
req.cmd = READ_DEMOD;
req.value = 0;
req.index = 0xff00 + msg[i].buf[0]; /* reg */
req.size = msg[i+1].len; /* bytes to read */
req.data = &msg[i+1].buf[0];
ret = ec168_ctrl_msg(d, &req);
i += 2;
} else {
dev_err(&d->udev->dev, "%s: I2C read not " \
"implemented\n",
KBUILD_MODNAME);
ret = -EOPNOTSUPP;
i += 2;
}
} else {
if (msg[i].addr == ec168_ec100_config.demod_address) {
if (msg[i].len < 1) {
i = -EOPNOTSUPP;
break;
}
req.cmd = WRITE_DEMOD;
req.value = msg[i].buf[1]; /* val */
req.index = 0xff00 + msg[i].buf[0]; /* reg */
req.size = 0;
req.data = NULL;
ret = ec168_ctrl_msg(d, &req);
i += 1;
} else {
if (msg[i].len < 1) {
i = -EOPNOTSUPP;
break;
}
req.cmd = WRITE_I2C;
req.value = msg[i].buf[0]; /* val */
req.index = 0x0100 + msg[i].addr; /* I2C addr */
req.size = msg[i].len-1;
req.data = &msg[i].buf[1];
ret = ec168_ctrl_msg(d, &req);
i += 1;
}
}
if (ret)
goto error;
}
ret = i;
error:
mutex_unlock(&d->i2c_mutex);
return ret;
}
static u32 ec168_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
}
static struct i2c_algorithm ec168_i2c_algo = {
.master_xfer = ec168_i2c_xfer,
.functionality = ec168_i2c_func,
};
/* Callbacks for DVB USB */
static int ec168_identify_state(struct dvb_usb_device *d, const char **name)
{
int ret;
u8 reply;
struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
dev_dbg(&d->udev->dev, "%s:\n", __func__);
ret = ec168_ctrl_msg(d, &req);
if (ret)
goto error;
dev_dbg(&d->udev->dev, "%s: reply=%02x\n", __func__, reply);
if (reply == 0x01)
ret = WARM;
else
ret = COLD;
return ret;
error:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int ec168_download_firmware(struct dvb_usb_device *d,
const struct firmware *fw)
{
int ret, len, remaining;
struct ec168_req req = {DOWNLOAD_FIRMWARE, 0, 0, 0, NULL};
dev_dbg(&d->udev->dev, "%s:\n", __func__);
#define LEN_MAX 2048 /* max packet size */
for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) {
len = remaining;
if (len > LEN_MAX)
len = LEN_MAX;
req.size = len;
req.data = (u8 *) &fw->data[fw->size - remaining];
req.index = fw->size - remaining;
ret = ec168_ctrl_msg(d, &req);
if (ret) {
dev_err(&d->udev->dev,
"%s: firmware download failed=%d\n",
KBUILD_MODNAME, ret);
goto error;
}
}
req.size = 0;
/* set "warm"? */
req.cmd = SET_CONFIG;
req.value = 0;
req.index = 0x0001;
ret = ec168_ctrl_msg(d, &req);
if (ret)
goto error;
/* really needed - no idea what does */
req.cmd = GPIO;
req.value = 0;
req.index = 0x0206;
ret = ec168_ctrl_msg(d, &req);
if (ret)
goto error;
/* activate tuner I2C? */
req.cmd = WRITE_I2C;
req.value = 0;
req.index = 0x00c6;
ret = ec168_ctrl_msg(d, &req);
if (ret)
goto error;
return ret;
error:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static struct ec100_config ec168_ec100_config = {
.demod_address = 0xff, /* not real address, demod is integrated */
};
static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
{
struct dvb_usb_device *d = adap_to_d(adap);
dev_dbg(&d->udev->dev, "%s:\n", __func__);
adap->fe[0] = dvb_attach(ec100_attach, &ec168_ec100_config,
&d->i2c_adap);
if (adap->fe[0] == NULL)
return -ENODEV;
return 0;
}
static struct mxl5005s_config ec168_mxl5003s_config = {
.i2c_address = 0xc6,
.if_freq = IF_FREQ_4570000HZ,
.xtal_freq = CRYSTAL_FREQ_16000000HZ,
.agc_mode = MXL_SINGLE_AGC,
.tracking_filter = MXL_TF_OFF,
.rssi_enable = MXL_RSSI_ENABLE,
.cap_select = MXL_CAP_SEL_ENABLE,
.div_out = MXL_DIV_OUT_4,
.clock_out = MXL_CLOCK_OUT_DISABLE,
.output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
.top = MXL5005S_TOP_25P2,
.mod_mode = MXL_DIGITAL_MODE,
.if_mode = MXL_ZERO_IF,
.AgcMasterByte = 0x00,
};
static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dvb_usb_device *d = adap_to_d(adap);
dev_dbg(&d->udev->dev, "%s:\n", __func__);
return dvb_attach(mxl5005s_attach, adap->fe[0], &d->i2c_adap,
&ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
}
static int ec168_streaming_ctrl(struct dvb_frontend *fe, int onoff)
{
struct dvb_usb_device *d = fe_to_d(fe);
struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
if (onoff)
req.index = 0x0102;
return ec168_ctrl_msg(d, &req);
}
/* DVB USB Driver stuff */
/* bInterfaceNumber 0 is HID
* bInterfaceNumber 1 is DVB-T */
static const struct dvb_usb_device_properties ec168_props = {
.driver_name = KBUILD_MODNAME,
.owner = THIS_MODULE,
.adapter_nr = adapter_nr,
.bInterfaceNumber = 1,
.identify_state = ec168_identify_state,
.firmware = EC168_FIRMWARE,
.download_firmware = ec168_download_firmware,
.i2c_algo = &ec168_i2c_algo,
.frontend_attach = ec168_ec100_frontend_attach,
.tuner_attach = ec168_mxl5003s_tuner_attach,
.streaming_ctrl = ec168_streaming_ctrl,
.num_adapters = 1,
.adapter = {
{
.stream = DVB_USB_STREAM_BULK(0x82, 6, 32 * 512),
}
},
};
static const struct usb_device_id ec168_id[] = {
{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168,
&ec168_props, "E3C EC168 reference design", NULL)},
{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2,
&ec168_props, "E3C EC168 reference design", NULL)},
{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3,
&ec168_props, "E3C EC168 reference design", NULL)},
{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4,
&ec168_props, "E3C EC168 reference design", NULL)},
{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5,
&ec168_props, "E3C EC168 reference design", NULL)},
{}
};
MODULE_DEVICE_TABLE(usb, ec168_id);
static struct usb_driver ec168_driver = {
.name = KBUILD_MODNAME,
.id_table = ec168_id,
.probe = dvb_usbv2_probe,
.disconnect = dvb_usbv2_disconnect,
.suspend = dvb_usbv2_suspend,
.resume = dvb_usbv2_resume,
.no_dynamic_id = 1,
.soft_unbind = 1,
};
module_usb_driver(ec168_driver);
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_DESCRIPTION("E3C EC168 driver");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(EC168_FIRMWARE);