blob: 68525f0205d3a6da81fda152bea043aa15aa9b8c [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2013 Sascha Hauer, Pengutronix
* Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
*/
#include <dt-bindings/gpio/gpio.h>
&fec {
/delete-property/ interrupts;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
};
&i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_recovery>;
scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
status = "okay";
pmic: pmic@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
};
sensor@48 {
compatible = "national,lm75";
reg = <0x48>;
vs-supply = <&reg_3p3v>;
};
eeprom@50 {
compatible = "st,24c64", "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
vcc-supply = <&reg_3p3v>;
};
};
&iomuxc {
/*
* This pinmuxing is required for the ERR006687 workaround. Board
* DTS files that enable the FEC controller with
* fsl,err006687-workaround-present must include this group.
*/
pinctrl_enet_fix: enetfixgrp {
fsl,pins = <
/* ENET ping patch */
MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
>;
};
};