blob: 36f4c997b0b3aa8c9bbbee78906f03dad0a73e7e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
#include "qcom-msm8960.dtsi"
#include "pm8921.dtsi"
/ {
model = "Qualcomm MSM8960 CDP";
compatible = "qcom,msm8960-cdp", "qcom,msm8960";
aliases {
serial0 = &gsbi5_serial;
};
chosen {
stdout-path = "serial0:115200n8";
};
ext_l2: gpio-regulator {
compatible = "regulator-fixed";
regulator-name = "ext_l2";
gpio = <&msmgpio 91 0>;
startup-delay-us = <10000>;
enable-active-high;
};
};
&gsbi1 {
qcom,mode = <GSBI_PROT_SPI>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_default>;
status = "okay";
};
&gsbi1_spi {
status = "okay";
ethernet@0 {
compatible = "micrel,ks8851";
reg = <0>;
interrupt-parent = <&msmgpio>;
interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
spi-max-frequency = <5400000>;
vdd-supply = <&ext_l2>;
vdd-io-supply = <&pm8921_lvs6>;
reset-gpios = <&msmgpio 89 0>;
};
};
&gsbi5 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
};
&gsbi5_serial {
status = "okay";
};
&msmgpio {
spi1_default: spi1-default-state {
mosi-pins {
pins = "gpio6";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
};
miso-pins {
pins = "gpio7";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
};
cs-pins {
pins = "gpio8";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
output-low;
};
clk-pins {
pins = "gpio9";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
};
};
};
&pm8921 {
interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
};
&pm8921_keypad {
linux,keymap = <
MATRIX_KEY(0, 0, KEY_VOLUMEUP)
MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
MATRIX_KEY(0, 3, KEY_CAMERA)
>;
keypad,num-rows = <1>;
keypad,num-columns = <5>;
status = "okay";
};
&rpm {
regulators {
compatible = "qcom,rpm-pm8921-regulators";
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s4>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
vdd_ncp-supply = <&pm8921_l6>;
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vdd_l21_l23_l29-supply = <&pm8921_s8>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
pm8921_s2: s2 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
pm8921_s3: s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
bias-pull-down;
};
pm8921_s4: s4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
};
pm8921_s7: s7 {
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
pm8921_s8: s8 {
regulator-always-on;
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
/* PMOS LDO */
pm8921_l1: l1 {
regulator-always-on;
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
pm8921_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
pm8921_l3: l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
bias-pull-down;
};
pm8921_l4: l4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
pm8921_l5: l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
pm8921_l7: l7 {
regulator-always-on;
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
pm8921_l8: l8 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
pm8921_l9: l9 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
pm8921_l10: l10 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
pm8921_l11: l11 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
pm8921_l12: l12 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
pm8921_l14: l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
pm8921_l15: l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
pm8921_l16: l16 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
pm8921_l17: l17 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
pm8921_l18: l18 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
bias-pull-down;
};
pm8921_l21: l21 {
regulator-min-microvolt = <1900000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
pm8921_l22: l22 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <2750000>;
bias-pull-down;
};
pm8921_l23: l23 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
pm8921_l24: l24 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1150000>;
bias-pull-down;
};
pm8921_l25: l25 {
regulator-always-on;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
bias-pull-down;
};
/* Low Voltage Switch */
pm8921_lvs1: lvs1 {
bias-pull-down;
};
pm8921_lvs2: lvs2 {
bias-pull-down;
};
pm8921_lvs3: lvs3 {
bias-pull-down;
};
pm8921_lvs4: lvs4 {
bias-pull-down;
};
pm8921_lvs5: lvs5 {
bias-pull-down;
};
pm8921_lvs6: lvs6 {
bias-pull-down;
};
pm8921_lvs7: lvs7 {
bias-pull-down;
};
pm8921_ncp: ncp {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
};
};
};
/* eMMC */
&sdcc1 {
status = "okay";
};
/* External micro SD card */
&sdcc3 {
status = "okay";
};