| // SPDX-License-Identifier: GPL-2.0-only |
| |
| /dts-v1/; |
| |
| #include "msm8916-samsung-gt5-common.dtsi" |
| |
| / { |
| model = "Samsung Galaxy Tab A 8.0 (2015)"; |
| compatible = "samsung,gt58", "qcom,msm8916"; |
| chassis-type = "tablet"; |
| |
| reg_5p4v: regulator-5p4v { |
| compatible = "regulator-fixed"; |
| regulator-name = "vlcd_5p4v"; |
| regulator-min-microvolt = <5400000>; |
| regulator-max-microvolt = <5400000>; |
| |
| gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| pinctrl-0 = <&buckbooster_en_default>; |
| pinctrl-names = "default"; |
| }; |
| |
| reg_vdd_tsp: regulator-vdd-tsp { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd_tsp"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| |
| gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| pinctrl-0 = <®_tsp_en_default>; |
| pinctrl-names = "default"; |
| }; |
| |
| i2c-amplifier { |
| compatible = "i2c-gpio"; |
| sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| |
| pinctrl-0 = <&_i2c_default>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| speaker_codec: audio-codec@34 { |
| compatible = "nxp,tfa9895"; |
| reg = <0x34>; |
| vddd-supply = <&pm8916_l5>; |
| sound-name-prefix = "Speaker"; |
| #sound-dai-cells = <0>; |
| }; |
| }; |
| |
| vibrator { |
| compatible = "gpio-vibrator"; |
| enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-0 = <&vibrator_en_default>; |
| pinctrl-names = "default"; |
| }; |
| }; |
| |
| &blsp_i2c5 { |
| status = "okay"; |
| |
| touchscreen@20 { |
| compatible = "zinitix,bt532"; |
| reg = <0x20>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <13 IRQ_TYPE_EDGE_FALLING>; |
| |
| touchscreen-size-x = <768>; |
| touchscreen-size-y = <1024>; |
| |
| vcca-supply = <®_vdd_tsp>; |
| vdd-supply = <&pm8916_l6>; |
| |
| pinctrl-0 = <&tsp_int_default>; |
| pinctrl-names = "default"; |
| }; |
| }; |
| |
| &gpu { |
| status = "okay"; |
| }; |
| |
| &mdss { |
| status = "okay"; |
| }; |
| |
| &mdss_dsi0 { |
| pinctrl-0 = <&mdss_default>; |
| pinctrl-1 = <&mdss_sleep>; |
| pinctrl-names = "default", "sleep"; |
| |
| panel@0 { |
| compatible = "samsung,lsl080al03", "samsung,s6d7aa0"; |
| reg = <0>; |
| |
| power-supply = <®_5p4v>; |
| vmipi-supply = <&pm8916_l5>; |
| reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&mdss_dsi0_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &mdss_dsi0_out { |
| data-lanes = <0 1 2 3>; |
| remote-endpoint = <&panel_in>; |
| }; |
| |
| &sound { |
| model = "samsung-a2015"; |
| pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>; |
| pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| &tlmm { |
| amp_i2c_default: amp-i2c-default-state { |
| pins = "gpio55", "gpio56"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| buckbooster_en_default: buckbooster-en-default-state { |
| pins = "gpio8"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| mdss_default: mdss-default-state { |
| pins = "gpio97"; |
| function = "gpio"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| mdss_sleep: mdss-sleep-state { |
| pins = "gpio97"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| reg_tsp_en_default: reg-tsp-en-default-state { |
| pins = "gpio73"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| secondary_mic_default: secondary-mic-default-state { |
| pins = "gpio98"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| output-high; |
| }; |
| |
| tsp_int_default: tsp-int-default-state { |
| pins = "gpio13"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| vibrator_en_default: vibrator-en-default-state { |
| pins = "gpio76"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |